// 3dcam // With huge help from @NicolasNoble : https://discord.com/channels/642647820683444236/646765703143227394/796876392670429204 /* PSX screen coordinate system * * Z+ * / * / * +------X+ * /| * / | * / Y+ * eye */ // bpy. app. debug = True #include #include #include #include #include #include #include // Precalculated sin/cos values //~ #include "psin.c" //~ #include "pcos.c" #include "atan.c" // Sample vector model #include "coridor2.c" //~ #include "tst-quads.c" //~ #include "gnd.c" //~ #include "startcube.c" #define VMODE 0 #define SCREENXRES 320 #define SCREENYRES 240 #define CENTERX SCREENXRES/2 #define CENTERY SCREENYRES/2 // pixel > cm : used in physics calculations #define SCALE 4 #define FNT_POS_X 960 #define FNT_POS_Y 0 #define OT2LEN 8 #define OTLEN 256 // Maximum number of OT entries #define PRIMBUFFLEN 4096 * sizeof(POLY_GT4) // Maximum number of POLY_GT3 primitives // atantable #define SWAP(a,b,c) {(c)=(a); (a)=(b); (b)=(c);} // swap(x, y, buffer) // dotproduct of two vectors #define dotProduct(v0, v1) \ (v0).vx * (v1).vx + \ (v0).vy * (v1).vy + \ (v0).vz * (v1).vz // min value #define min(a,b) \ (a)-(b)>0?(b):(a) // max #define max(a,b) \ (a)-(b)>0?(a):(b) #define subVector(v0, v1) \ (v0).vx - (v1).vx, \ (v0).vy - (v1).vy, \ (v0).vz - (v1).vz //~ extern ushort rcossin_tbl[]; // Display and draw environments, double buffered DISPENV disp[2]; DRAWENV draw[2]; // OT for BG/FG discrimination u_long otdisc[2][OT2LEN] = {0}; // Main OT u_long ot[2][OTLEN] = {0}; // Ordering table (contains addresses to primitives) char primbuff[2][PRIMBUFFLEN] = {0}; // Primitive list // That's our prim buffer //~ int primcnt=0; // Primitive counter char * nextpri = primbuff[0]; // Primitive counter char db = 0; // Current buffer counter CVECTOR BGc = {50, 50, 75, 0}; // Far color VECTOR BKc = {128, 128, 128, 0}; // Back color // Local color matrix //~ static MATRIX cmat = { //~ /* light source #0, #1, #2, */ //~ ONE, 0, 0, /* R */ //~ 0, ONE, 0, /* G */ //~ 0, 0, ONE, /* B */ //~ }; //~ // local light matrix : Direction and reach of each light source. //~ // Each light is aligned with the axis, hence direction is in the same coordinate system as the PSX (Y-axis down) //~ // One == 4096 is reach/intensity of light source //~ static MATRIX lgtmat = { //~ // X Y Z //~ ONE, 0, 0, // Light 0 //~ 0,0,0, // Light 1 //~ 0,0,0 // Light 2 //~ }; // Light //~ MATRIX rottrans; MATRIX rotlgt; SVECTOR lgtang = {0, 0, 0}; MATRIX light; //~ SVECTOR lgtang = {1024, -512, 1024}; static int m_cosTable[512]; // precalc costable static const unsigned int DC_2PI = 2048; // this is from gere : https://github.com/grumpycoders/Balau/blob/master/tests/test-Handles.cc#L20-L102 static const unsigned int DC_PI = 1024; static const unsigned int DC_PI2 = 512; short vs; typedef struct{ int x, xv; // x: current value += xv : new value int y, yv; // x,y,z, vx, vy, vz are in PSX units (ONE == 4096) int z, zv; int pan, panv; int tilt, tiltv; int rol; VECTOR pos; SVECTOR rot; SVECTOR dvs; MATRIX mat; } CAMERA; CAMERA camera = { 0,0, 0,0, 0,0, 0,0, 0,0, 0, {0,0,0}, {0,0,0}, {0,0,0} }; // physics long time = 0; const int gravity = 10; //~ //vertex anim //~ typedef struct { //~ int nframes; // number of frames e.g 20 //~ int nvert; // number of vertices e.g 21 //~ SVECTOR data[]; // vertex pos as SVECTORs e.g 20 * 21 SVECTORS //~ } VANIM; //Pad int pressed = 0; u_short timer = 0; // Cam stuff int camMode = 0; long timeB = 0; int lerping = 0; // Inverted Cam coordinates for Forward Vector calc VECTOR InvCamPos = {0,0,0,0}; VECTOR fVecActor = {0,0,0,0}; u_long triCount = 0; // Prototypes // Stolen from grumpycoder // Sin/Cos Table void generateTable(void); int ncos(u_int t); int nsin(u_int t); // Atan table long long patan(long x, long y); //sqrt u_int psqrt(u_int n); //~ typedef unsigned int uint32_t; //~ typedef int int32_t; // fixed point math static inline int32_t dMul(int32_t a, int32_t b); static inline uint32_t lerpU(uint32_t start, uint32_t dest, unsigned pos); static inline int32_t lerpS(int32_t start, int32_t dest, unsigned pos); static inline int32_t lerpD(int32_t start, int32_t dest, int32_t pos); static inline long long lerpL(long long start, long long dest, long long pos); // PSX setup void init(void); void display(void); // Utils void LoadTexture(u_long * tim, TIM_IMAGE * tparam); int cliptest3(short * v1); int lerp(int start, int end, int factor); // FIXME : not working as it should SVECTOR SVlerp(SVECTOR start, SVECTOR end, int factor); // FIXME VECTOR getVectorTo(VECTOR actor, VECTOR target); int alignAxisToVect(VECTOR target, short axis, int factor); // Camera void getCameraXZ(int * x, int * z, int actorX, int actorZ, int angle, int distance); void applyCamera(CAMERA * cam); void setCameraPos(VECTOR pos, SVECTOR rot); // Physics VECTOR getIntCollision(BODY one, BODY two); VECTOR getExtCollision(BODY one, BODY two); void ResolveCollision( BODY * one, BODY * two ); VECTOR angularMom(BODY body); // Not yours ;) void applyAcceleration(BODY * actor); void callback(); int main() { // Mesh stuff int i; long t, p, OTz, OTc, Flag, nclip; // t == vertex count, p == depth cueing interpolation value, OTz == value to create Z-ordered OT, Flag == see LibOver47.pdf, p.143 POLY_GT3 * poly; POLY_GT4 * poly4; SPRT * sprt; DR_TPAGE * tpage; // Poly subdiv DIVPOLYGON4 div4 = { 0 }; div4.pih = SCREENXRES; div4.piv = SCREENYRES; div4.ndiv = 2; //~ DIVPOLYGON3 div3 = { 0 }; //~ div3.pih = SCREENXRES; //~ div3.piv = SCREENYRES; //~ div3.ndiv = 1; MATRIX Cmatrix = {0}; init(); generateTable(); VSyncCallback(callback); //~ SetLightMatrix(&LLM); SetColorMatrix(&cmat); SetBackColor(BKc.vx,BKc.vy,BKc.vz); //~ SetFarColor(BGc.r, BGc.g, BGc.b); SetFogNearFar(1200, 1600, SCREENXRES); for (int k = 0; k < sizeof(meshes)/sizeof(TMESH *); k++){ LoadTexture(meshes[k]->tim_data, meshes[k]->tim); } //~ camPtr = &camAngle_camPath_001; if (camPtr->tim_data){ LoadTexture(camPtr->tim_data, camPtr->BGtim); } // physics short physics = 1; long dt; VECTOR col_lvl, col_sphere, col_sphere_act = {0}; // Cam stuff VECTOR posToActor = {0, 0, 0, 0}; // position of camera relative to actor VECTOR camAngleToAct = {0, 0, 0, 0}; // rotation angles for the camera to point at actor // Sprite sustem VECTOR posToCam = {0, 0, 0, 0}; VECTOR objAngleToCam = {0, 0, 0, 0}; int angle = 0; //PSX units = 4096 == 360° = 2Pi int dist = 0; //PSX units short timediv = 1; int atime = 0; for (int k = 0; k < sizeof(meshes)/sizeof(meshes[0]); k++){ triCount += meshes[k]->tmesh->len; } // Pre-calc bg test setCameraPos(camPtr->campos->pos, camPtr->campos->rot); //~ camera.rot.vz = 100; // Main loop while (1) { // Clear the main OT ClearOTagR(otdisc[db], OT2LEN); // Clear Secondary OT ClearOTagR(ot[db], OTLEN); // timeB = time; time ++; // atime is used for animations timing timediv = 1; if (time % timediv == 0){ atime ++; } // Angle between camera and actor // using atantable (faster) camAngleToAct.vy = (patan(-posToActor.vx, -posToActor.vz) / 16) - 3076 ; camAngleToAct.vx = patan(dist, posToActor.vy) >> 4; //~ posToCam = getVectorTo(*meshPlan.pos, camera.pos); //~ posToCam = getVectorTo(camera.pos, *meshPlan.pos); //~ objAngleToCam.vy = ( (patan(meshPlan.pos->vx, meshPlan.pos->vz) - patan(camera.pos.vx > 0 ? camera.pos.vx : camera.pos.vx, camera.pos.vz) ) >> 4) - 1024; //~ objAngleToCam.vy = ( (patan(meshPlan.pos->vx > 0 ? meshPlan.pos->vx : 4096 + meshPlan.pos->vx, meshPlan.pos->vz) - patan(camera.pos.vx > 0 ? camera.pos.vx : 4096 + camera.pos.vx, camera.pos.vz) ) >> 4) - 1024; //~ objAngleToCam.vx = ratan2(posToCam.pad, posToCam.vy); //~ meshPlan.rot->vy = objAngleToCam.vy; //~ meshPlan.rot->vx = objAngleToCam.vy; // Actor Forward vector fVecActor = *actorPtr->pos; fVecActor.vx = actorPtr->pos->vx + (nsin(actorPtr->rot->vy/2)); fVecActor.vz = actorPtr->pos->vz - (ncos(actorPtr->rot->vy/2)); if(camMode != 2){ camera.rot.vy = camAngleToAct.vy; // using csin/ccos, no need for theta //~ camera.rot.vy = angle; camera.rot.vx = camAngleToAct.vx; } if(camMode < 4 ){ lerping = 0; } // Camera follows actor with lerp for rotations if(camMode == 0){ dist = 150; camera.pos.vx = -(camera.x/ONE); //~ camera.pos.vy = -(camera.y/ONE); camera.pos.vz = -(camera.z/ONE); //~ InvCamPos.vx = camera.x/ONE; //~ InvCamPos.vz = camera.z/ONE; //~ applyVector(&InvCamPos, -1,-1,-1, *=); angle = -actorPtr->rot->vy / 2; //~ angle = actorPtr->rot->vy; getCameraXZ(&camera.x, &camera.z, actorPtr->pos->vx, actorPtr->pos->vz, angle, dist); // FIXME! camera lerping to pos //~ angle += lerp(camera.rot.vy, -actorPtr->rot->vy, 128); //~ angle = lerpD(camera.rot.vy << 12, actorPtr->rot->vy << 12, 1024 << 12) >> 12; } // Camera rotates continuously around actor if (camMode == 1){ dist = 150; camera.pos.vx = -(camera.x/ONE); //~ camera.pos.vy = -(camera.y/ONE); camera.pos.vz = -(camera.z/ONE); //~ fVecActor = *actorPtr->pos; //~ fVecActor.vx = actorPtr->pos->vx + (nsin(actorPtr->rot->vy)); //~ fVecActor.vz = actorPtr->pos->vz - (ncos(actorPtr->rot->vy)); getCameraXZ(&camera.x, &camera.z, actorPtr->pos->vx, actorPtr->pos->vz, angle, dist); angle += 10; } // Fixed Camera with actor tracking if (camMode == 3){ // Using libgte sqrt ( slower) //~ dist = SquareRoot0( (posToActor.vx * posToActor.vx ) + (posToActor.vz * posToActor.vz) ); // Using precalc sqrt dist = psqrt( (posToActor.vx * posToActor.vx ) + (posToActor.vz * posToActor.vz) ); camera.pos.vx = 190; camera.pos.vz = 100; camera.pos.vy = 180; } // Fixed Camera angle if (camMode == 2){ // Load BG image in two SPRT since max width == 256 if (camPtr->tim_data){ // left part sprt = (SPRT *) nextpri; setSprt(sprt); setRGB0(sprt, 128,128,128); setXY0(sprt, 0, 0); setWH(sprt, 256, 240); setUV0(sprt, 0, 0); setClut(sprt, camPtr->BGtim->crect->x, camPtr->BGtim->crect->y); addPrim(&otdisc[db][OT2LEN-1], sprt); nextpri += sizeof(SPRT); tpage = (DR_TPAGE *) nextpri; setDrawTPage(tpage, 0, 1, getTPage(camPtr->BGtim->mode & 0x3, 0, camPtr->BGtim->prect->x, camPtr->BGtim->prect->y)); addPrim(&otdisc[db][OT2LEN-1], tpage); nextpri += sizeof(DR_TPAGE); // right part sprt = (SPRT *) nextpri; setSprt(sprt); setRGB0(sprt, 128,128,128); setXY0(sprt, 320-(320-256), 0); setWH(sprt, 320-256, 240); setUV0(sprt, 0, 0); setClut(sprt, camPtr->BGtim->crect->x, camPtr->BGtim->crect->y); addPrim(&otdisc[db][OT2LEN-1], sprt); nextpri += sizeof(SPRT); tpage = (DR_TPAGE *) nextpri; setDrawTPage(tpage, 0, 1, getTPage(camPtr->BGtim->mode & 0x3, 0, camPtr->BGtim->prect->x + 128, camPtr->BGtim->prect->y)); addPrim(&otdisc[db][OT2LEN-1], tpage); nextpri += sizeof(DR_TPAGE); } setCameraPos(camPtr->campos->pos, camPtr->campos->rot); } // Flyby mode with LERP from camStart to camEnd if (camMode == 4){ // If key pos exist for camera if (camPath.len) { // Lerping sequence has not begun if (!lerping){ // Set cam start position ( first key pos ) camera.pos.vx = camPath.points[camPath.cursor].vx; camera.pos.vy = camPath.points[camPath.cursor].vy; camera.pos.vz = camPath.points[camPath.cursor].vz; // Lerping sequence is starting lerping = 1; // Set cam pos index to 0 camPath.pos = 0; } // Pre calculated sqrt ( see psqrt() ) dist = psqrt( (posToActor.vx * posToActor.vx ) + (posToActor.vz * posToActor.vz)); // Fixed point precision 2^12 == 4096 int precision = 12; camera.pos.vx = lerpD(camPath.points[camPath.cursor].vx << precision, camPath.points[camPath.cursor+1].vx << precision, camPath.pos << precision) >> precision; camera.pos.vy = lerpD(camPath.points[camPath.cursor].vy << precision, camPath.points[camPath.cursor+1].vy << precision, camPath.pos << precision) >> precision; camera.pos.vz = lerpD(camPath.points[camPath.cursor].vz << precision, camPath.points[camPath.cursor+1].vz << precision, camPath.pos << precision) >> precision; //~ FntPrint("Cam %d, %d\n", (int32_t)camPath.points[camPath.cursor].vx, camPath.points[camPath.cursor+1].vx); //~ FntPrint("Cam %d, %d, %d\n", camera.pos.vx, camera.pos.vy, camera.pos.vz); //~ FntPrint("Theta y: %d x: %d\n", theta.vy, theta.vx); //~ FntPrint("Pos: %d Cur: %d\nTheta y: %d x: %d\n", camPath.pos, camPath.cursor, theta.vy, theta.vx); // Linearly increment the lerp factor camPath.pos += 20; // If camera has reached next key pos, reset pos index, move cursor to next key pos if (camPath.pos > (1 << precision) ){ camPath.pos = 0; camPath.cursor ++; } // Last key pos is reached, reset cursor to first key pos, lerping sequence is over if ( camPath.cursor == camPath.len - 1 ){ lerping = 0; camPath.cursor = 0; } } else { // if no key pos exists, switch to next camMode camMode ++; } } // Camera "on a rail" - cam is tracking actor, and moving with constraints on all axis if (camMode == 5) { // track actor. If theta (actor/cam rotation angle) is above or below an arbitrary angle, // move cam so that the angle doesn't increase/decrease anymore. if (camPath.len) { // Lerping sequence has not begun if (!lerping){ // Set cam start position ( first key pos ) camera.pos.vx = camPath.points[camPath.cursor].vx; camera.pos.vy = camPath.points[camPath.cursor].vy; camera.pos.vz = camPath.points[camPath.cursor].vz; // Lerping sequence is starting lerping = 1; // Set cam pos index to 0 camPath.pos = 0; } // Pre calculated sqrt ( see psqrt() ) dist = psqrt( (posToActor.vx * posToActor.vx ) + (posToActor.vz * posToActor.vz)); // Fixed point precision 2^12 == 4096 short precision = 12; camera.pos.vx = lerpD(camPath.points[camPath.cursor].vx << precision, camPath.points[camPath.cursor + 1].vx << precision, camPath.pos << precision) >> precision; camera.pos.vy = lerpD(camPath.points[camPath.cursor].vy << precision, camPath.points[camPath.cursor + 1].vy << precision, camPath.pos << precision) >> precision; camera.pos.vz = lerpD(camPath.points[camPath.cursor].vz << precision, camPath.points[camPath.cursor + 1].vz << precision, camPath.pos << precision) >> precision; //~ FntPrint("Cam %d, %d\n", (int32_t)camPath.points[camPath.cursor].vx, camPath.points[camPath.cursor+1].vx); //~ FntPrint("Cam %d, %d, %d\n", camera.pos.vx, camera.pos.vy, camera.pos.vz); //~ FntPrint("Pos: %d Cur: %d\nTheta y: %d x: %d\n", camPath.pos, camPath.cursor, theta.vy, theta.vx); if ( camAngleToAct.vy < -50 ) { camPath.pos += 40; } if ( camAngleToAct.vy > 50 ) { camPath.pos -= 40; } // If camera has reached next key pos, reset pos index, move cursor to next key pos if (camPath.pos > (1 << precision) ){ camPath.pos = 0; camPath.cursor ++; //~ camPath.dir = 1; } if (camPath.pos < -100 ){ camPath.pos = 1 << precision; camPath.cursor --; //~ camPath.dir *= -1; } // Last key pos is reached, reset cursor to first key pos, lerping sequence is over if ( camPath.cursor == camPath.len - 1 || camPath.cursor < 0 ){ lerping = 0; camPath.cursor = 0; } } else { // if no key pos exists, switch to next camMode camMode ++; } } //~ dt = time/180+1 - time/180; // Spatial partitioning for (int msh = 0; msh < curNode->siblings->index; msh ++){ if ( !getIntCollision( *actorPtr->body , *curNode->siblings->list[msh]->plane->body).vx && !getIntCollision( *actorPtr->body , *curNode->siblings->list[msh]->plane->body).vz ) { // FntPrint("%d", msh ); //~ curNode = curNode->siblings->list[msh]; // curNode = &nodegnd; levelPtr = curNode->siblings->list[msh]->plane; } } // Physics if (physics){ // if(time%1 == 0){ for ( int k = 0; k < sizeof(meshes)/sizeof(meshes[0]);k ++){ //~ for ( int k = 0; k < curNode->objects->index ; k ++){ if ( ( *meshes[k]->isRigidBody == 1 ) ) { //~ if ( ( *curNode->rigidbodies->list[k]->isRigidBody == 1 ) ) { //~ applyAcceleration(curNode->rigidbodies->list[k]->body); applyAcceleration(meshes[k]->body); // Get col with level ( modelgnd_body ) col_lvl = getIntCollision( *meshes[k]->body , *levelPtr->body ); //~ col_lvl = getIntCollision( *actorPtr->body , *curNode->plane->body ); //~ col_sphere = getIntCollision( *propPtr->body, *propPtr->body->curNode->plane->body ); col_sphere = getIntCollision( *propPtr->body, *levelPtr->body ); col_sphere_act = getExtCollision( *actorPtr->body, *propPtr->body ); //~ // If !col, keep moving //~ if ( !col_lvl.vx ){ curNode->rigidbodies->list[k]->pos->vx = curNode->rigidbodies->list[k]->body->position.vx; } //~ if ( !col_lvl.vy ){ curNode->rigidbodies->list[k]->pos->vy = curNode->rigidbodies->list[k]->body->position.vy; };//meshes[k]->body->gForce.vy = 0;} // FIXME : Why the 15px offset ? //~ if ( !col_lvl.vz ){ curNode->rigidbodies->list[k]->pos->vz = curNode->rigidbodies->list[k]->body->position.vz; } //~ // If no col with ground, fall off if ( col_lvl.vy ) { if (!col_lvl.vx && !col_lvl.vz){actorPtr->body->position.vy = actorPtr->body->min.vy;} } if (col_sphere.vy){ if (!col_sphere.vx && !col_sphere.vz){propPtr->body->position.vy = propPtr->body->min.vy; } } //~ if (col_sphere_act.vx && col_sphere_act.vz ){ //~ propPtr->body->velocity.vx += actorPtr->body->velocity.vx;// * ONE / propPtr->body->restitution ; //~ propPtr->body->velocity.vz += actorPtr->body->velocity.vz;// * ONE / propPtr->body->restitution ; //~ if (propPtr->body->velocity.vx){ //~ VECTOR L = angularMom(*propPtr->body); //~ propPtr->rot->vz -= L.vx; //~ } //~ if (propPtr->body->velocity.vz){ //~ VECTOR L = angularMom(*propPtr->body); //~ propPtr->rot->vx -= L.vz; //~ } //~ } //~ if (!col_sphere_act.vx){ //~ propPtr->body->velocity.vx = 0; //~ } meshes[k]->pos->vx = meshes[k]->body->position.vx; meshes[k]->pos->vy = meshes[k]->body->position.vy ; meshes[k]->pos->vz = meshes[k]->body->position.vz; } meshes[k]->body->velocity.vy = 0; meshes[k]->body->velocity.vx = 0; meshes[k]->body->velocity.vz = 0; //~ curNode->rigidbodies->list[k]->body->velocity.vx = curNode->rigidbodies->list[k]->body->velocity.vz = 0; //~ FntPrint("V:%d ", curNode->rigidbodies->list[k]->body->velocity.vy); } // } } // Camera setup // position of cam relative to actor posToActor.vx = actorPtr->pos->vx + camera.pos.vx; posToActor.vz = actorPtr->pos->vz + camera.pos.vz; posToActor.vy = actorPtr->pos->vy + camera.pos.vy; // position of object relative to cam // Clear the current OT // ClearOTagR(ot[db], OTLEN); // Polygon drawing for (int k = 0; k < sizeof(meshes)/sizeof(meshes[0]); k++){ // loop on each mesh t=0; // If rigidbdy, apply rot/transform matrix if (*meshes[k]->isRigidBody | *meshes[k]->isStaticBody){ //~ PushMatrix(); // Push current matrix on the stack (real slow -> dma transfer ) RotMatrix_gte(meshes[k]->rot, meshes[k]->mat); // Apply rotation matrix TransMatrix(meshes[k]->mat, meshes[k]->pos); // Apply translation matrix CompMatrix(&camera.mat, meshes[k]->mat, meshes[k]->mat); // Was using &PolyMatrix instead of meshes[k]->mat SetRotMatrix(meshes[k]->mat); // Set default rotation matrix - Was using &PolyMatrix instead of meshes[k]->mat SetTransMatrix(meshes[k]->mat); // Was using &PolyMatrix instead of meshes[k]->mat } // mesh is POLY_GT3 ( triangle ) if (meshes[k]->index[t].code == 4) { //~ t=0; // modelCube is a TMESH, len member == # vertices, but here it's # of triangle... So, for each tri * 3 vertices ... for (i = 0; i < (meshes[k]->tmesh->len * 3); i += 3) { // if mesh is not part of BG, draw them, else, discard if (!*meshes[k]->isBG || camMode != 2) { poly = (POLY_GT3 *)nextpri; // FIXME : Polygon subdiv - is it working ? //~ OTc = *meshes[k]->OTz>>4; //~ FntPrint("OTC:%d", OTc); //~ if (OTc < 15) { //~ if (OTc > 5) div3.ndiv = 1; else div3.ndiv = 1; //~ DivideGT3( //~ // Vertex coord //~ &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vx ], //~ &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vz ], //~ &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vy ], //~ // UV coord //~ meshes[k]->tmesh->u[i+0], //~ meshes[k]->tmesh->u[i+2], //~ meshes[k]->tmesh->u[i+1], //~ // Color //~ meshes[k]->tmesh->c[i], //~ meshes[k]->tmesh->c[i+1], //~ meshes[k]->tmesh->c[i+2], //~ // Gpu packet //~ poly, //~ &ot[db][*meshes[k]->OTz], //~ &div3); // Increment primitive list pointer //~ nextpri += ( (sizeof(POLY_GT3) + 3) / 4 ) * (( 1 << ( div3.ndiv )) << ( div3.ndiv )); //~ triCount = ((1<<(div3.ndiv))<<(div3.ndiv)); //triCount = ( (sizeof(POLY_GT3) + 3) / 4 ) * (( 1 << ( div3.ndiv )) << ( div3.ndiv )); //~ } // Vertex Anim if (*meshes[k]->isAnim){ // with interpolation if(meshes[k]->anim->interpolate){ // ping pong //~ if (meshes[k]->anim->cursor > 4096 || meshes[k]->anim->cursor < 0){ //~ meshes[k]->anim->dir *= -1; //~ } short precision = 12; //~ // next keyframe if (meshes[k]->anim->cursor > (1 << precision)) { if ( meshes[k]->anim->lerpCursor < meshes[k]->anim->nframes - 1 ) { meshes[k]->anim->lerpCursor ++; meshes[k]->anim->cursor = 0; } if ( meshes[k]->anim->lerpCursor == meshes[k]->anim->nframes - 1 ) { //~ else { meshes[k]->anim->lerpCursor = 0; meshes[k]->anim->cursor = 0; } } //~ FntPrint("%d %d %d\n",meshes[k]->anim->lerpCursor, meshes[k]->anim->nframes, meshes[k]->anim->cursor ); // overflows somewhere ? //~ for (int v = 0; v <= 1; v++){ //~ meshes[k]->tmesh->v[* &meshes[k]->index[t].order.vx + v].vx = lerpD( meshes[k]->anim->data[0 * meshes[k]->anim->nvert + * &meshes[k]->index[t].order.vx + v].vx << 12 , meshes[k]->anim->data[10 * meshes[k]->anim->nvert + * &meshes[k]->index[t].order.vx + v].vx << 12, meshes[k]->anim->cursor << 12) >> 12; //~ meshes[k]->tmesh->v[* &meshes[k]->index[t].order.vx + v].vz = lerpD( meshes[k]->anim->data[0 * meshes[k]->anim->nvert + * &meshes[k]->index[t].order.vx + v].vz << 12 , meshes[k]->anim->data[10 * meshes[k]->anim->nvert + * &meshes[k]->index[t].order.vx + v].vz << 12, meshes[k]->anim->cursor << 12) >> 12; //~ meshes[k]->tmesh->v[* &meshes[k]->index[t].order.vx + v].vy = lerpD( meshes[k]->anim->data[0 * meshes[k]->anim->nvert + * &meshes[k]->index[t].order.vx + v].vy << 12 , meshes[k]->anim->data[10 * meshes[k]->anim->nvert + * &meshes[k]->index[t].order.vx + v].vy << 12, meshes[k]->anim->cursor << 12) >> 12; //~ } // Let's lerp between keyframes meshes[k]->tmesh->v[meshes[k]->index[t].order.vx].vx = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx].vx << precision , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx].vx << precision, meshes[k]->anim->cursor << precision) >> precision; meshes[k]->tmesh->v[meshes[k]->index[t].order.vx].vz = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx].vz << precision , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx].vz << precision, meshes[k]->anim->cursor << precision) >> precision; meshes[k]->tmesh->v[meshes[k]->index[t].order.vx].vy = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx].vy << precision , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx].vy << precision, meshes[k]->anim->cursor << precision) >> precision; meshes[k]->tmesh->v[meshes[k]->index[t].order.vz].vx = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz].vx << precision , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz].vx << precision, meshes[k]->anim->cursor << precision) >> precision; meshes[k]->tmesh->v[meshes[k]->index[t].order.vz].vz = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz].vz << precision , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz].vz << precision, meshes[k]->anim->cursor << precision) >> precision; meshes[k]->tmesh->v[meshes[k]->index[t].order.vz].vy = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz].vy << precision , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz].vy << precision, meshes[k]->anim->cursor << precision) >> precision; meshes[k]->tmesh->v[meshes[k]->index[t].order.vy].vx = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy].vx << precision , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy].vx << precision, meshes[k]->anim->cursor << precision) >> precision; meshes[k]->tmesh->v[meshes[k]->index[t].order.vy].vz = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy].vz << precision , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy].vz << precision, meshes[k]->anim->cursor << precision) >> precision; meshes[k]->tmesh->v[meshes[k]->index[t].order.vy].vy = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy].vy << precision , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy].vy << precision, meshes[k]->anim->cursor << precision) >> precision; meshes[k]->anim->cursor += 2 * meshes[k]->anim->dir; //~ FntPrint("%d %d\n", meshes[k]->tmesh->v[meshes[k]->index[t].order.vx].vx, meshes[k]->tmesh->v[meshes[k]->index[t].order.vx].vz); //~ FntPrint("%d %d\n", *&meshes[k]->index[t].order.vx, *(&meshes[k]->index[t].order.vx+1)); //~ FntPrint("Anim fps : %d\n", meshes[k]->anim->cursor); // Coord transformation nclip = RotAverageNclip3( &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vx ], &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vz ], &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vy ], (long*)&poly->x0, (long*)&poly->x1, (long*)&poly->x2, meshes[k]->p, meshes[k]->OTz, &Flag ); } else { // No interpolation : just take the vertices coordinates from the anim data nclip = RotAverageNclip3( &meshes[k]->anim->data[ atime % meshes[k]->anim->nframes * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx], &meshes[k]->anim->data[ atime % meshes[k]->anim->nframes * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz], &meshes[k]->anim->data[ atime % meshes[k]->anim->nframes * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy], (long*)&poly->x0, (long*)&poly->x1, (long*)&poly->x2, meshes[k]->p, meshes[k]->OTz, &Flag ); } } else { // No animation // Use model's regular vertex pos nclip = RotAverageNclip3( &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vx ], &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vz ], &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vy ], (long*)&poly->x0, (long*)&poly->x1, (long*)&poly->x2, meshes[k]->p, meshes[k]->OTz, &Flag ); } if (nclip > 0 && *meshes[k]->OTz > 0 && (*meshes[k]->p < 4096) ) { SetPolyGT3(poly); // Transparency effect if (*meshes[k]->isPrism){ // Use current DRAWENV clip as TPAGE ((POLY_GT3 *)poly)->tpage = getTPage(meshes[k]->tim->mode&0x3, 0, draw[db].clip.x, draw[db].clip.y ); //~ setShadeTex(poly, 1); // Use projected coordinates (results from RotAverage...) as UV coords and clamp them to 0-255,0-224 setUV3(poly, (poly->x0 < 0? 0 : poly->x0 > 255? 255 : poly->x0), (poly->y0 < 0? 0 : poly->y0 > 224? 224 : poly->y0), (poly->x1 < 0? 0 : poly->x1 > 255? 255 : poly->x1), (poly->y1 < 0? 0 : poly->y1 > 224? 224 : poly->y1), (poly->x2 < 0? 0 : poly->x2 > 255? 255 : poly->x2), (poly->y2 < 0? 0 : poly->y2 > 224? 224 : poly->y2) ); } else { // Use regular TPAGE ((POLY_GT3 *)poly)->tpage = getTPage(meshes[k]->tim->mode&0x3, 0, meshes[k]->tim->prect->x, meshes[k]->tim->prect->y ); //~ if (!meshes[k]->isBG) { //~ setShadeTex(poly, 1); //~ setSemiTrans(poly, 1); //~ } setUV3(poly, meshes[k]->tmesh->u[i].vx , meshes[k]->tmesh->u[i].vy + meshes[k]->tim->prect->y, meshes[k]->tmesh->u[i+2].vx, meshes[k]->tmesh->u[i+2].vy + meshes[k]->tim->prect->y, meshes[k]->tmesh->u[i+1].vx, meshes[k]->tmesh->u[i+1].vy + meshes[k]->tim->prect->y); //~ } //~ else { //~ // Use model UV coordinates //~ setUV3(poly, 255 , 255, //~ 255 , 255, //~ 255 , 255); //~ } } // If tim mode == 0 | 1, set CLUT coordinates if ((meshes[k]->tim->mode & 0x3) < 2){ setClut(poly, meshes[k]->tim->crect->x, meshes[k]->tim->crect->y); } // If vertex anim has updated normals //~ if (*meshes[k]->isAnim){ // &meshes[k]->anim->data[ atime % meshes[k]->anim->nframes * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx], //~ NormalColorDpq(&meshes[k]->anim->normals[ atime%19 * modelCylindre_anim.nvert + meshes[k]->index[t]], &meshes[k]->tmesh->c[meshes[k]->index[t]], *meshes[k]->p, &outCol); //~ NormalColorDpq(&meshes[k]->anim->normals[ atime%19 * modelCylindre_anim.nvert + meshes[k]->index[t+1]], &meshes[k]->tmesh->c[meshes[k]->index[t+1]], *meshes[k]->p, &outCol1); //~ NormalColorDpq(&meshes[k]->anim->normals[ atime%19 * modelCylindre_anim.nvert + meshes[k]->index[t+2]], &meshes[k]->tmesh->c[meshes[k]->index[t+2]], *meshes[k]->p, &outCol2); //~ } else { // using precalc BG, default to black CVECTOR outCol ={128,128,128,0}; CVECTOR outCol1 ={128,128,128,0}; CVECTOR outCol2 ={128,128,128,0}; //~ if ( !camPtr->tim_data ) { // default to neutral grey //~ outCol.r , outCol.g , outCol.b = 128; //~ outCol1.r, outCol1.g, outCol1.b = 128; //~ outCol2.r, outCol2.g, outCol2.b = 128; NormalColorDpq(&meshes[k]->tmesh->n[ meshes[k]->index[t].order.vx ], &meshes[k]->tmesh->c[ meshes[k]->index[t].order.vx ], *meshes[k]->p, &outCol); NormalColorDpq(&meshes[k]->tmesh->n[ meshes[k]->index[t].order.vz ], &meshes[k]->tmesh->c[ meshes[k]->index[t].order.vz ], *meshes[k]->p, &outCol1); NormalColorDpq(&meshes[k]->tmesh->n[ meshes[k]->index[t].order.vy ], &meshes[k]->tmesh->c[ meshes[k]->index[t].order.vy ], *meshes[k]->p, &outCol2); //~ } if (*meshes[k]->isPrism){ // Use un-interpolated (i.e: no light, no fog) colors setRGB0(poly, meshes[k]->tmesh->c[i].r, meshes[k]->tmesh->c[i].g, meshes[k]->tmesh->c[i].b); setRGB1(poly, meshes[k]->tmesh->c[i+1].r, meshes[k]->tmesh->c[i+1].g, meshes[k]->tmesh->c[i+1].b); setRGB2(poly, meshes[k]->tmesh->c[i+2].r, meshes[k]->tmesh->c[i+2].g, meshes[k]->tmesh->c[i+2].b); } else { setRGB0(poly, outCol.r, outCol.g , outCol.b); setRGB1(poly, outCol1.r, outCol1.g, outCol1.b); setRGB2(poly, outCol2.r, outCol2.g, outCol2.b); } if ((*meshes[k]->OTz > 0) && (*meshes[k]->OTz < OTLEN) && (*meshes[k]->p < 4096)){ AddPrim(&ot[db][*meshes[k]->OTz-2], poly); // OTz - 2 } nextpri += sizeof(POLY_GT3); } t+=1; //~ if (*meshes[k]->isRigidBody){ //~ PopMatrix(); // Pull previous matrix from stack (slow) //~ } } } } // mesh is POLY_GT4 ( quads ) if (meshes[k]->index[t].code == 8) { t=0; for (i = 0; i < (meshes[k]->tmesh->len * 4); i += 4) { // if mesh is not part of BG, draw them, else, discard if (!*meshes[k]->isBG || camMode != 2) { poly4 = (POLY_GT4 *)nextpri; // Vertex Anim if (*meshes[k]->isAnim){ // with interpolation if(meshes[k]->anim->interpolate){ // ping pong //~ if (meshes[k]->anim->cursor > 4096 || meshes[k]->anim->cursor < 0){ //~ meshes[k]->anim->dir *= -1; //~ } short precision = 12; if (meshes[k]->anim->cursor > 1<anim->lerpCursor < meshes[k]->anim->nframes - 1 ) { meshes[k]->anim->lerpCursor ++; meshes[k]->anim->cursor = 0; } if ( meshes[k]->anim->lerpCursor == meshes[k]->anim->nframes - 1 ) { meshes[k]->anim->lerpCursor = 0; meshes[k]->anim->cursor = 0; } } meshes[k]->tmesh->v[meshes[k]->index[t].order.vx].vx = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx].vx << 12 , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx].vx << 12, meshes[k]->anim->cursor << 12) >> 12; meshes[k]->tmesh->v[meshes[k]->index[t].order.vx].vz = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx].vz << 12 , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx].vz << 12, meshes[k]->anim->cursor << 12) >> 12; meshes[k]->tmesh->v[meshes[k]->index[t].order.vx].vy = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx].vy << 12 , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx].vy << 12, meshes[k]->anim->cursor << 12) >> 12; meshes[k]->tmesh->v[meshes[k]->index[t].order.vz].vx = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz].vx << 12 , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz].vx << 12, meshes[k]->anim->cursor << 12) >> 12; meshes[k]->tmesh->v[meshes[k]->index[t].order.vz].vz = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz].vz << 12 , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz].vz << 12, meshes[k]->anim->cursor << 12) >> 12; meshes[k]->tmesh->v[meshes[k]->index[t].order.vz].vy = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz].vy << 12 , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz].vy << 12, meshes[k]->anim->cursor << 12) >> 12; meshes[k]->tmesh->v[meshes[k]->index[t].order.vy].vx = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy].vx << 12 , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy].vx << 12, meshes[k]->anim->cursor << 12) >> 12; meshes[k]->tmesh->v[meshes[k]->index[t].order.vy].vz = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy].vz << 12 , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy].vz << 12, meshes[k]->anim->cursor << 12) >> 12; meshes[k]->tmesh->v[meshes[k]->index[t].order.vy].vy = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy].vy << 12 , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy].vy << 12, meshes[k]->anim->cursor << 12) >> 12; meshes[k]->tmesh->v[meshes[k]->index[t].order.pad].vx = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.pad].vx << 12 , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.pad].vx << 12, meshes[k]->anim->cursor << 12) >> 12; meshes[k]->tmesh->v[meshes[k]->index[t].order.pad].vz = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.pad].vz << 12 , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.pad].vz << 12, meshes[k]->anim->cursor << 12) >> 12; meshes[k]->tmesh->v[meshes[k]->index[t].order.pad].vy = lerpD( meshes[k]->anim->data[meshes[k]->anim->lerpCursor * meshes[k]->anim->nvert + meshes[k]->index[t].order.pad].vy << 12 , meshes[k]->anim->data[(meshes[k]->anim->lerpCursor + 1) * meshes[k]->anim->nvert + meshes[k]->index[t].order.pad].vy << 12, meshes[k]->anim->cursor << 12) >> 12; meshes[k]->anim->cursor += 2 * meshes[k]->anim->dir; // Coord transformations nclip = RotAverageNclip4( &meshes[k]->tmesh->v[ meshes[k]->index[t].order.pad ], &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vz], &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vx ], &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vy ], (long*)&poly4->x0, (long*)&poly4->x1, (long*)&poly4->x2, (long*)&poly4->x3, meshes[k]->p, meshes[k]->OTz, &Flag ); } else { // No interpolation, use all vertices coordinates in anim data OTz = RotAverageNclip4( &meshes[k]->anim->data[ atime % meshes[k]->anim->nframes * meshes[k]->anim->nvert + meshes[k]->index[t].order.pad ], &meshes[k]->anim->data[ atime % meshes[k]->anim->nframes * meshes[k]->anim->nvert + meshes[k]->index[t].order.vz ], &meshes[k]->anim->data[ atime % meshes[k]->anim->nframes * meshes[k]->anim->nvert + meshes[k]->index[t].order.vx ], &meshes[k]->anim->data[ atime % meshes[k]->anim->nframes * meshes[k]->anim->nvert + meshes[k]->index[t].order.vy ], (long*)&poly4->x0, (long*)&poly4->x1, (long*)&poly4->x2, (long*)&poly4->x3, meshes[k]->p, meshes[k]->OTz, &Flag ); } } else { // No animation // Use regulare vertex coords nclip = RotAverageNclip4( &meshes[k]->tmesh->v[ meshes[k]->index[t].order.pad ], &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vz], &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vx ], &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vy ], (long*)&poly4->x0, (long*)&poly4->x1, (long*)&poly4->x2, (long*)&poly4->x3, meshes[k]->p, meshes[k]->OTz, &Flag ); } if (nclip > 0 && *meshes[k]->OTz > 0 && (*meshes[k]->p < 4096)) { SetPolyGT4(poly4); //~ // FIXME : Polygon subdiv - is it working ? //~ OTc = *meshes[k]->OTz >> 4; //~ FntPrint("OTC:%d", OTc); //~ if (OTc < 4) { //~ if (OTc > 1) div4.ndiv = 1; else div4.ndiv = 2; //~ DivideGT4( //~ // Vertex coord //~ &meshes[k]->tmesh->v[ meshes[k]->index[t].order.pad ], //~ &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vz ], //~ &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vx ], //~ &meshes[k]->tmesh->v[ meshes[k]->index[t].order.vy ], //~ // UV coord //~ meshes[k]->tmesh->u[i+3], //~ meshes[k]->tmesh->u[i+2], //~ meshes[k]->tmesh->u[i+0], //~ meshes[k]->tmesh->u[i+1], //~ // Color //~ meshes[k]->tmesh->c[i], //~ meshes[k]->tmesh->c[i+1], //~ meshes[k]->tmesh->c[i+2], //~ meshes[k]->tmesh->c[i+3], //~ // Gpu packet //~ poly4, //~ &ot[db][*meshes[k]->OTz], //~ &div4); //~ // Increment primitive list pointer //~ nextpri += ( (sizeof(POLY_GT4) + 3) / 4 ) * (( 1 << ( div4.ndiv )) << ( div4.ndiv )); //~ triCount = ((1<<(div4.ndiv))<<(div4.ndiv)); //~ } else if (OTc < 48) { // Transparency effect if (*meshes[k]->isPrism){ // Use current DRAWENV clip as TPAGE ((POLY_GT4 *)poly4)->tpage = getTPage(meshes[k]->tim->mode&0x3, 0, draw[db].clip.x, draw[db].clip.y ); //SetShadeTex(poly4, 1); // Use projected coordinates (results from RotAverage...) as UV coords and clamp them to 0-255,0-224 setUV4(poly4, (poly4->x0 < 0? 0 : poly4->x0 > 255? 255 : poly4->x0), (poly4->y0 < 0? 0 : poly4->y0 > 224? 224 : poly4->y0), (poly4->x1 < 0? 0 : poly4->x1 > 255? 255 : poly4->x1), (poly4->y1 < 0? 0 : poly4->y1 > 224? 224 : poly4->y1), (poly4->x2 < 0? 0 : poly4->x2 > 255? 255 : poly4->x2), (poly4->y2 < 0? 0 : poly4->y2 > 224? 224 : poly4->y2), (poly4->x3 < 0? 0 : poly4->x3 > 255? 255 : poly4->x3), (poly4->y3 < 0? 0 : poly4->y3 > 224? 224 : poly4->y3) ); } else { // Use regular TPAGE ((POLY_GT4 *)poly4)->tpage = getTPage(meshes[k]->tim->mode&0x3, 0, meshes[k]->tim->prect->x, meshes[k]->tim->prect->y ); // Use model UV coordinates setUV4(poly4, meshes[k]->tmesh->u[i+3].vx, meshes[k]->tmesh->u[i+3].vy + meshes[k]->tim->prect->y, meshes[k]->tmesh->u[i+2].vx, meshes[k]->tmesh->u[i+2].vy + meshes[k]->tim->prect->y, meshes[k]->tmesh->u[i+0].vx, meshes[k]->tmesh->u[i+0].vy + meshes[k]->tim->prect->y, meshes[k]->tmesh->u[i+1].vx, meshes[k]->tmesh->u[i+1].vy + meshes[k]->tim->prect->y); } // If tim mode == 0 | 1, set CLUT coordinates if ((meshes[k]->tim->mode & 0x3) < 2){ setClut(poly, meshes[k]->tim->crect->x, meshes[k]->tim->crect->y); } CVECTOR outCol = {128,128,128,0}; CVECTOR outCol1 = {128,128,128,0}; CVECTOR outCol2 = {128,128,128,0}; CVECTOR outCol3 = {128,128,128,0}; NormalColorDpq(&meshes[k]->tmesh->n[ meshes[k]->index[t].order.pad ] , &meshes[k]->tmesh->c[ meshes[k]->index[t].order.pad ], *meshes[k]->p, &outCol); NormalColorDpq(&meshes[k]->tmesh->n[ meshes[k]->index[t].order.vz ], &meshes[k]->tmesh->c[ meshes[k]->index[t].order.vz ], *meshes[k]->p, &outCol1); NormalColorDpq(&meshes[k]->tmesh->n[ meshes[k]->index[t].order.vx ], &meshes[k]->tmesh->c[ meshes[k]->index[t].order.vx ], *meshes[k]->p, &outCol2); NormalColorDpq(&meshes[k]->tmesh->n[ meshes[k]->index[t].order.vy ], &meshes[k]->tmesh->c[ meshes[k]->index[t].order.vy ], *meshes[k]->p, &outCol3); if (*meshes[k]->isPrism){ // Use un-interpolated (i.e: no light, no fog) colors setRGB0(poly4, meshes[k]->tmesh->c[i].r, meshes[k]->tmesh->c[i].g, meshes[k]->tmesh->c[i].b); setRGB1(poly4, meshes[k]->tmesh->c[i+1].r, meshes[k]->tmesh->c[i+1].g, meshes[k]->tmesh->c[i+1].b); setRGB2(poly4, meshes[k]->tmesh->c[i+2].r, meshes[k]->tmesh->c[i+2].g, meshes[k]->tmesh->c[i+2].b); setRGB3(poly4, meshes[k]->tmesh->c[i+3].r, meshes[k]->tmesh->c[i+3].g, meshes[k]->tmesh->c[i+3].b); } else { setRGB0(poly4, outCol.r, outCol.g , outCol.b); setRGB1(poly4, outCol1.r, outCol1.g, outCol1.b); setRGB2(poly4, outCol2.r, outCol2.g, outCol2.b); setRGB3(poly4, outCol3.r, outCol3.g, outCol3.b); } if ((*meshes[k]->OTz > 0) && (*meshes[k]->OTz < OTLEN) && (*meshes[k]->p < 4096)){ AddPrim(&ot[db][*meshes[k]->OTz-3], poly4); // OTz - 2 } nextpri += sizeof(POLY_GT4); //~ } } t+=1; } } } // Find and apply light rotation matrix RotMatrix(&lgtang, &rotlgt); MulMatrix0(&lgtmat, &rotlgt, &light); SetLightMatrix(&light); applyCamera(&camera); } // Add secondary OT to main OT AddPrims(otdisc[db], ot[db] + OTLEN - 1, ot[db]); FntPrint("CurNode : %x\nIndex: %d", curNode, curNode->siblings->index); //~ FntPrint("Time : %d %d dt :%d\n",time, atime, dt); //~ FntPrint("CamMode: %d Slowmo : %d\nTricount: %d OTz: %d\nOTc: %d, p: %d\n", camMode, actorPtr->anim->interpolate, triCount, *meshes[9]->OTz, OTc, *meshes[9]->p); //~ FntPrint("Fy: %d Vy:%d\n", actorPtr->body->gForce.vy, actorPtr->body->velocity.vy ); //~ FntPrint("Vy: %4d\n", actorPtr->body->gForce.vy ); //~ FntPrint("%d %d %d", meshes[0]->tim->mode & 0x3, meshes[0]->tim->crect->x, meshes[0]->tim->crect->y); //~ FntPrint("%d %d %d %d\n", getVectorTo(InvCamPos, *actorPtr->pos)); //~ FntPrint("Tst : %d %d %d %d\n", getVectorTo(fVecActor, *actorPtr->pos)); //~ FntPrint("Cc %d Sc %d\n", ncos(camera.rot.vy), nsin(camera.rot.vy)); //~ FntPrint("CRot: %d\n", camera.rot.vy ); //~ FntPrint("AcRot: %d %d\n", actorPtr->rot->vy, angle); //~ FntPrint("Cam pos: %d %d\n", -camera.pos.vx, -camera.pos.vz ); //~ FntPrint("Ac pos: %d %d\n", actorPtr->pos->vx, actorPtr->pos->vz ); //~ FntPrint("fVec pos: %d %d\n", fVecActor.vx, fVecActor.vz); //~ FntPrint("pos2cam: %d %d \n", posToCam.vx, posToCam.vz ); //~ FntPrint("ang2cam: %d %d", objAngleToCam.vy, objAngleToCam.vx); FntFlush(-1); display(); //~ frame = VSync(-1); } return 0; } void init(){ // Reset the GPU before doing anything and the controller PadInit(0); ResetGraph(0); // Initialize and setup the GTE InitGeom(); SetGeomOffset(CENTERX, CENTERY); // x, y offset SetGeomScreen(CENTERX); // Distance between eye and screen // Set the display and draw environments SetDefDispEnv(&disp[0], 0, 0 , SCREENXRES, SCREENYRES); SetDefDispEnv(&disp[1], 0, SCREENYRES, SCREENXRES, SCREENYRES); SetDefDrawEnv(&draw[0], 0, SCREENYRES, SCREENXRES, SCREENYRES); SetDefDrawEnv(&draw[1], 0, 0, SCREENXRES, SCREENYRES); if (VMODE) { SetVideoMode(MODE_PAL); disp[0].screen.y += 8; disp[1].screen.y += 8; } setRGB0(&draw[0], BGc.r, BGc.g, BGc.b); setRGB0(&draw[1], BGc.r, BGc.g, BGc.b); draw[0].isbg = 1; draw[1].isbg = 1; PutDispEnv(&disp[db]); PutDrawEnv(&draw[db]); // Init font system FntLoad(FNT_POS_X, FNT_POS_Y); FntOpen(16, 180, 240, 96, 0, 512); } void display(void){ DrawSync(0); vs = VSync(0); PutDispEnv(&disp[db]); PutDrawEnv(&draw[db]); SetDispMask(1); // Main OT DrawOTag(otdisc[db] + OT2LEN - 1); // Secondary OT //~ DrawOTag(ot[db] + OTLEN - 1); db = !db; nextpri = primbuff[db]; } // Nic's function void getCameraXZ(int * x, int * z, int actorX, int actorZ, int angle, int distance) { // Using Nic's Costable : https://github.com/grumpycoders/Balau/blob/master/tests/test-Handles.cc#L20-L102 // https://godbolt.org/z/q6cMcj *x = (actorX << 12) + (distance * nsin(angle)); *z = (actorZ << 12) - (distance * ncos(angle)); } // @Will : you might want to use sin/cos to move the camera in a circle but you could do that by moving it along it’s tangent and then clamping the distance void applyCamera(CAMERA * cam){ VECTOR vec; // Vector that holds the output values of the following instructions RotMatrix_gte(&cam->rot, &cam->mat); // Convert rotation angle in psx units (360° == 4096) to rotation matrix) ApplyMatrixLV(&cam->mat, &cam->pos, &vec); // Multiply matrix by vector pos and output to vec TransMatrix(&cam->mat, &vec); // Apply transform vector SetRotMatrix(&cam->mat); // Set Rotation matrix SetTransMatrix(&cam->mat); // Set Transform matrix } void setCameraPos(VECTOR pos, SVECTOR rot){ camera.pos = pos; camera.rot = rot; }; void LoadTexture(u_long * tim, TIM_IMAGE * tparam){ // This part is from Lameguy64's tutorial series : lameguy64.net/svn/pstutorials/chapter1/3-textures.html login/pw: annoyingmous OpenTIM(tim); // Open the tim binary data, feed it the address of the data in memory ReadTIM(tparam); // This read the header of the TIM data and sets the corresponding members of the TIM_IMAGE structure LoadImage(tparam->prect, tparam->paddr); // Transfer the data from memory to VRAM at position prect.x, prect.y DrawSync(0); // Wait for the drawing to end if (tparam->mode & 0x8){ // check 4th bit // If 4th bit == 1, TIM has a CLUT LoadImage(tparam->crect, tparam->caddr); // Load it to VRAM at position crect.x, crect.y DrawSync(0); // Wait for drawing to end } } int lerp(int start, int end, int factor){ // lerp interpolated cam movement // InBetween = Value 1 + ( ( Value2 - Value1 ) * lerpValue ) ; // lerpValue should be a float between 0 and 1. // easeIn return ( start ) + (( end - start ) * factor ) >> 12; } long long easeIn(long long i, int div){ return ((i << 7) * (i << 7) * (i << 7) / div ) >> 19; //~ ((i << 7) * (i << 7) * (i << 7) / div ) >> 19 } int easeOut(int i){ return (4096 >> 7) - ((4096 - (i << 7)) * (4096 - (i << 7))) >> 12; } int easeInOut(int i, int div){ return lerp(easeIn(i, div), easeOut(i) , i); } SVECTOR SVlerp(SVECTOR start, SVECTOR end, int factor){ SVECTOR output = {0,0,0,0}; output.vx = lerp(start.vx, end.vx, factor); output.vy = lerp(start.vy, end.vy, factor); output.vz = lerp(start.vz, end.vz, factor); return output; } VECTOR getVectorTo(VECTOR actor, VECTOR target){ VECTOR direction = { subVector(target, actor) }; VECTOR Ndirection = {0,0,0,0}; //~ VECTOR distance = {0}; //~ copyVector(&distance, &direction); //~ applyVector(&distance, distance.vx, distance.vy, distance.vz, *=); u_int distSq = (direction.vx * direction.vx) + (direction.vz * direction.vz); // + distance.vy; direction.pad = psqrt(distSq); VectorNormal(&direction, &Ndirection); //~ direction.pad = csqrt(distSq); //~ FntPrint("%d ", distSq); return Ndirection ; } int alignAxisToVect(VECTOR target, short axis, int factor){ } VECTOR getIntCollision(BODY one, BODY two){ VECTOR d1, d2, col; short correction = 50; d1.vx = (one.position.vx + one.max.vx) - (two.position.vx + two.min.vx); d1.vy = (one.position.vy + one.max.vy) - (two.position.vy + two.min.vy); d1.vz = (one.position.vz + one.max.vz) - (two.position.vz + two.min.vz); d2.vx = (two.position.vx + two.max.vx) - (one.position.vx - one.max.vx); d2.vy = (two.position.vy + two.max.vy) - (one.position.vy + one.min.vy); d2.vz = (two.position.vz + two.max.vz) - (one.position.vz - one.max.vz); col.vx = !(d1.vx > 0 && d2.vx > 0); col.vy = d1.vy > 0 && d2.vy > 0; col.vz = !(d1.vz > 0 && d2.vz > 0); return col; } VECTOR getExtCollision(BODY one, BODY two){ VECTOR d1, d2, col; d1.vx = (one.position.vx + one.max.vx) - (two.position.vx + two.min.vx); d1.vy = (one.position.vy + one.max.vy) - (two.position.vy + two.min.vy); d1.vz = (one.position.vz + one.max.vz) - (two.position.vz + two.min.vz); d2.vx = (two.position.vx + two.max.vx) - (one.position.vx + one.min.vx); d2.vy = (two.position.vy + two.max.vy) - (one.position.vy + one.min.vy); d2.vz = (two.position.vz + two.max.vz) - (one.position.vz + one.min.vz); col.vx = d1.vx > 0 && d2.vx > 0; col.vy = d1.vy > 0 && d2.vy > 0; col.vz = d1.vz > 0 && d2.vz > 0; return col; } void applyAcceleration(BODY * actor){ short dt = 1; VECTOR acceleration = {actor->invMass * actor->gForce.vx , (actor->invMass * actor->gForce.vy) + (gravity * ONE), actor->invMass * actor->gForce.vz}; //~ FntPrint("acc: %d %d %d\n", acceleration.vx, acceleration.vy, acceleration.vz ); actor->velocity.vx += (acceleration.vx * dt) >> 12; actor->velocity.vy += (acceleration.vy * dt) >> 12; actor->velocity.vz += (acceleration.vz * dt) >> 12; //~ FntPrint("acc: %d %d %d\n", acceleration.vx / ONE, acceleration.vy / ONE, acceleration.vz / ONE ); actor->position.vx += (actor->velocity.vx * dt); actor->position.vy += (actor->velocity.vy * dt); actor->position.vz += (actor->velocity.vz * dt); //~ FntPrint("vel: %d %d %d\n", actor->velocity.vx, actor->velocity.vy, actor->velocity.vz ); } //~ // https://gamedevelopment.tutsplus.com/tutorials/how-to-create-a-custom-2d-physics-engine-the-basics-and-impulse-resolution--gamedev-6331 void ResolveCollision( BODY * one, BODY * two ){ //~ FntPrint("rv: %d, %d, %d\n", one->velocity.vx, one->velocity.vy, one->velocity.vz); // Calculate relative velocity VECTOR rv = { subVector( one->velocity, two->velocity) }; //~ FntPrint("rv: %d, %d, %d\n", rv.vx,rv.vy,rv.vz); // Collision normal VECTOR normal = { subVector( two->position, one->position ) }; // Normalize collision normal normal.vx = normal.vx > 0 ? 1 : normal.vx < 0 ? -1 : 0 ; normal.vy = normal.vy > 256 ? 1 : normal.vy < -256 ? -1 : 0 ; normal.vz = normal.vz > 0 ? 1 : normal.vz < 0 ? -1 : 0 ; //~ FntPrint("norm: %d, %d, %d\n", normal.vx,normal.vy,normal.vz); // Calculate relative velocity in terms of the normal direction long velAlongNormal = dotProduct( rv, normal ); //~ FntPrint("velN: %d\n", velAlongNormal); // Do not resolve if velocities are separating if(velAlongNormal > 0) return; // Calculate restitution long e = min( one->restitution, two->restitution ); //~ FntPrint("e: %d\n", e); //~ // Calculate impulse scalar long j = -(1 + e) * velAlongNormal * ONE; j /= one->invMass + two->invMass; //~ j /= ONE; //~ FntPrint("j: %d\n", j); // Apply impulse applyVector(&normal, j, j, j, *=); //~ FntPrint("Cnormal %d %d %d\n",normal.vx,normal.vy,normal.vz); VECTOR velOne = normal; VECTOR velTwo = normal; applyVector(&velOne,one->invMass,one->invMass,one->invMass, *=); applyVector(&velTwo,two->invMass,two->invMass,two->invMass, *=); //~ FntPrint("V1 %d %d %d\n", velOne.vx/4096,velOne.vy/4096,velOne.vz/4096); //~ FntPrint("V2 %d %d %d\n", velTwo.vx/4096,velTwo.vy/4096,velTwo.vz/4096); applyVector(&one->velocity, velOne.vx/4096/4096, velOne.vy/4096/4096, velOne.vz/4096/4096, +=); applyVector(&two->velocity, velTwo.vx/4096/4096, velTwo.vy/4096/4096, velTwo.vz/4096/4096, -=); //~ FntPrint("V1 %d %d %d\n", velOne.vx/4096/4096,velOne.vy/4096/4096,velOne.vz/4096/4096); //~ FntPrint("V2 %d %d %d\n", velTwo.vx/4096/4096,velTwo.vy/4096/4096,velTwo.vz/4096/4096); } VECTOR angularMom(BODY body){ // L = r * p // p = m * v VECTOR w = {0,0,0,0}; int r = (body.max.vx - body.min.vx) >> 1; w.vx = (r * body.mass * body.velocity.vx) >> 2; w.vy = (r * body.mass * body.velocity.vy) >> 2; w.vz = (r * body.mass * body.velocity.vz) >> 2; //~ FntPrint("v: %d, r:%d, w:%d\n", body.velocity.vz * r, r * r, w.vz); return w; } // From : https://github.com/grumpycoders/pcsx-redux/blob/7438e9995833db5bc1e14da735bbf9dc78300f0b/src/mips/shell/math.h static inline int32_t dMul(int32_t a, int32_t b) { long long r = a; r *= b; return r >> 24; } // standard lerp function // s = source, an arbitrary number up to 2^24 // d = destination, an arbitrary number up to 2^24 // p = position, a number between 0 and 256, inclusive // p = 0 means output = s // p = 256 means output = d static inline uint32_t lerpU(uint32_t start, uint32_t dest, unsigned pos) { return (start * (256 - pos) + dest * pos) >> 8; } static inline int32_t lerpS(int32_t start, int32_t dest, unsigned pos) { return (start * (256 - pos) + dest * pos) >> 8; } // start, dest and pos have to be << x, then the result has to be >> x where x defines precision: // precision = 2^24 - 2^x // << x : 0 < pos < precision // https://discord.com/channels/642647820683444236/646765703143227394/811318550978494505 // my angles are between 0 and 2048 (full circle), so 2^11 for the range of angles; with numbers on a 8.24 representation, a 1.0 angle (or 2pi) means it's 2^24, so to "convert" my angles from 8.24 to my internal discrete cos, I only have to shift by 13 static inline int32_t lerpD(int32_t start, int32_t dest, int32_t pos) { return dMul(start, 16777216 - pos) + dMul(dest, pos); } static inline long long lerpL(long long start, long long dest, long long pos){ return dMul( (start << 12), 16777216 - (pos << 12) ) + dMul((dest << 12), (pos << 12) ) >> 12; } // A few notes on the following code : int ncos(unsigned int t) { t %= DC_2PI; int r; if (t < DC_PI2) { r = m_cosTable[t]; } else if (t < DC_PI) { r = -m_cosTable[DC_PI - 1 - t]; } else if (t < (DC_PI + DC_PI2)) { r = -m_cosTable[t - DC_PI]; } else { r = m_cosTable[DC_2PI - 1 - t]; }; return r >> 12; }; // sin(x) = cos(x - pi / 2) int nsin(unsigned int t) { t %= DC_2PI; if (t < DC_PI2){ return ncos(t + DC_2PI - DC_PI2); }; return ncos(t - DC_PI2); }; // f(n) = cos(n * 2pi / 2048) <- 2048 is == DC_2PI value // f(n) = 2 * f(1) * f(n - 1) - f(n - 2) void generateTable(void){ m_cosTable[0] = 16777216; // 2^24 * cos(0 * 2pi / 2048) => 2^24 * 1 = 2^24 : here, 2^24 defines the precision we want after the decimal point static const long long C = 16777137; // 2^24 * cos(1 * 2pi / 2048) = C = f(1); m_cosTable[1] = C; for (int i = 2; i < 512; i++){ m_cosTable[i] = ((C * m_cosTable[i - 1]) >> 23) - m_cosTable[i - 2]; m_cosTable[511] = 0; } }; // https://github.com/Arsunt/TR2Main/blob/411cacb35914c616cb7960c0e677e00c71c7ee88/3dsystem/phd_math.cpp#L432 long long patan(long x, long y){ long long result; int swapBuf; int flags = 0; // if either x or y are 0, return 0 if( x == 0 && y == 0){ return 0; } if( x < 0 ) { flags |= 4; x = -x; } if ( y < 0 ) { flags |= 2; y = -y; } if ( y > x ) { flags |= 1; SWAP(x, y ,swapBuf); } result = AtanBaseTable[flags] + AtanAngleTable[0x800 * y / x]; if ( result < 0 ){ result = -result; return result; } } u_int psqrt(u_int n){ u_int result = 0; u_int base = 0x40000000; u_int basedResult; for( ; base != 0; base >>= 2 ) { for( ; base != 0; base >>= 2 ) { basedResult = base + result; result >>= 1; if( basedResult > n ) { break; } n -= basedResult; result |= base; } } return result; } int cliptest3(short *v1) { if( v1[0]<0 && v1[2]<0 && v1[4]<0 ) return 0; if( v1[1]<0 && v1[3]<0 && v1[5]<0 ) return 0; if( v1[0] > SCREENXRES && v1[2] > SCREENXRES && v1[4] > SCREENXRES) return 0; if( v1[1] > SCREENYRES && v1[3] > SCREENYRES && v1[5] > SCREENYRES) return 0; return 1; } void callback(){ u_short pad = PadRead(0); static u_short lastPad; static short forceApplied = 0; int div = 4096 >> 7; static int lerpValues[4096 >> 7]; static short cursor = 0; static short curCamAngle = 0; if(!lerpValues[0]){ for ( long long i = 0; i < div ; i++ ){ // lerp //~ lerpValues[15-i] = lerp(-24, -224, (i << 8)); // lerp with easeOut : replace factor (i << 8) with (frame/duration)² : in fixed point math : ((i << 8) * (i << 8) / (4096 >> 8)) >> 8 lerpValues[(div-1)-i] = lerp(-24, -264, easeIn(i, div)); //~ FntPrint("%d, ", lerpValues[div-1-i] ); //~ FntPrint("%d , ", ((i << 8) / (4096 >> 8) / (4096 >> 8))); //~ FntPrint("1: %d , ", ((i << 8) / (4096 >> 8) * (i << 8) / (4096 >> 8)) >> 4 ); //~ FntPrint("2: %d , ", ((i << 8) * (i << 8) / (4096 >> 8)) >> 8 ); } } //~ long long flip = 4096 - (32 << 7); //~ return (4096 >> 7) - (flip * flip) >> 12; //~ FntPrint("%d - ", (4096 >> 7) - ((4096 - (0 << 7)) * (4096 - (0 << 7))) >> 12 ); //~ FntPrint("%d - ", easeInOut(105, div)); //~ static short cursor = 0; if(timer){timer--;} if(cursor>0){cursor--;} if (pad & PADR1 && !timer){ if (!camPtr->tim_data){ if(camMode < 6){ camMode ++; lerping = 0; } else { setCameraPos(camPtr->campos->pos, camPtr->campos->rot); camPath.cursor = 0; camMode = 0; lerping = 0; } //~ lastPad = pad; //~ timer = 10; //~ pressed = 1; } else { if (curCamAngle < 5) { curCamAngle++; camPtr = camAngles[curCamAngle]; LoadTexture(camPtr->tim_data, camPtr->BGtim); } else { curCamAngle = 0; } } lastPad = pad; timer = 10; } if (!(pad & PADR1) && lastPad & PADR1){ //~ pressed = 0; } if (pad & PADL2){ lgtang.vy += 32; } if (pad & PADL1){ lgtang.vz += 32; } if (pad & PADRup && !timer){ if (*actorPtr->isPrism){ *actorPtr->isPrism = 0; } else { *actorPtr->isPrism = 1; } timer = 10; lastPad = pad; } if ( pad & PADRdown && !timer ){ //~ if (actorPtr->body->gForce.vy >= 0 && actorPtr->body->position.vy >= actorPtr->body->min.vy ){ //~ forceApplied -= 150; //~ } cursor = div - 15; timer = 30; lastPad = pad; } if ( !(pad & PADRdown) && lastPad & PADRdown){ //~ lastPad = pad; } if (pad & PADRleft && !timer){ if (actorPtr->anim->interpolate){ actorPtr->anim->interpolate = 0; } else { actorPtr->anim->interpolate = 1; } timer = 10; lastPad = pad; } if (pad & PADLup){ //~ actorPtr->body->gForce.vz = (10 * ncos(actorPtr->rot->vy)) >> 12 ; //~ actorPtr->body->gForce.vx = (10 * nsin(actorPtr->rot->vy)) >> 12 ; // Cammode 0 : //~ actorPtr->body->gForce.vz = getVectorTo(InvCamPos, *actorPtr->pos).vz >> 8 ; //~ actorPtr->body->gForce.vx = getVectorTo(InvCamPos, *actorPtr->pos).vx >> 8 ; // Others actorPtr->body->gForce.vz = getVectorTo(fVecActor, *actorPtr->pos).vz >> 8 ; actorPtr->body->gForce.vx = -getVectorTo(fVecActor, *actorPtr->pos).vx >> 8 ; lastPad = pad; } if ( !(pad & PADLup) && lastPad & PADLup) { actorPtr->body->gForce.vz = 0; actorPtr->body->gForce.vx = 0; } if (pad & PADLdown){ //~ actorPtr->body->gForce.vz = -10 ; //~ actorPtr->body->gForce.vx = -10 ; // Cammode 0 : //~ actorPtr->body->gForce.vz = -getVectorTo(InvCamPos, *actorPtr->pos).vz >> 8 ; //~ actorPtr->body->gForce.vx = -getVectorTo(InvCamPos, *actorPtr->pos).vx >> 8 ; // Others: actorPtr->body->gForce.vz = -getVectorTo(fVecActor, *actorPtr->pos).vz >> 8 ; actorPtr->body->gForce.vx = getVectorTo(fVecActor, *actorPtr->pos).vx >> 8 ; lastPad = pad; } if ( !(pad & PADLdown) && lastPad & PADLdown) { actorPtr->body->gForce.vz = 0; actorPtr->body->gForce.vx = 0; lastPad = pad; } if (pad & PADLleft){ //~ actorPtr->rot->vx = 0; //~ actorPtr->rot->vz = 0; actorPtr->rot->vy -= 32; lastPad = pad; } if (pad & PADLright){ //~ actorPtr->rot->vx = 0; //~ actorPtr->rot->vz = 0; actorPtr->rot->vy += 32; lastPad = pad; } //~ actorPtr->body->gForce.vy = forceApplied; //~ if (actorPtr->body->gForce.vy < 0){ //~ forceApplied += gravity; //~ } if (cursor){ actorPtr->body->position.vy = lerpValues[cursor];} //~ FntPrint("Mode : %d Angle: %d\n", camMode, curCamAngle); //~ FntPrint("Curs: %d Vy: %d\n", cursor, actorPtr->body->position.vy ); //~ FntPrint("C %d S %d\n", ncos(actorPtr->rot->vy), nsin(actorPtr->rot->vy)); //~ FntPrint("%d\n", !(pad & PADRdown) && lastPad & PADRdown); //~ FntPrint("sin: %d cos:%d\n", nsin(actorPtr->rot->vy), ncos(actorPtr->rot->vy)); //~ FntPrint("sin: %d cos:%d\n", 10 * nsin(actorPtr->rot->vy) >> 12, 10 * ncos(actorPtr->rot->vy) >> 12); }