// Stream a STR file from CD, decompress and play it. // Schnappy 07-2021 // based on Lameguy64 strplay library : http://www.psxdev.net/forum/viewtopic.php?t=507 // Original PsyQ sample code : /psyq/addons/cd/MOVIE // Video to STR conversion : https://github.com/ABelliqueux/nolibgs_hello_worlds/tree/main/hello_str #include #include #include #include #include #include // CD library #include // CODEC library #include #define VMODE 0 // Video Mode : 0 : NTSC, 1: PAL #define TRUECOL 0 // 0 : 16bpp, 1: 24bpp #define SCREENXRES 320 // Screen width #define SCREENYRES 240 + (VMODE << 4) // Screen height : If VMODE is 0 = 240, if VMODE is 1 = 256 #define CENTERX SCREENXRES/2 // Center of screen on x #define CENTERY SCREENYRES/2 // Center of screen on y #define MARGINX 8 // margins for text display #define MARGINY 16 #define FONTSIZE 8 * 7 // Text Field Height DISPENV disp[2]; // Double buffered DISPENV and DRAWENV DRAWENV draw[2]; short db = 0; // index of which buffer is used, values 0, 1 #define STR_POS_X 0 // If PAL mode, add 8 pixels offset on Y (256-240)/2 #define STR_POS_Y (VMODE << 4)/2 // Ring Buffer size (32 sectors seems good enough) #define RING_SIZE 32 #if TRUECOL // pixels per short word (16b/2B) // 1px is 3B in 24bpp // 1px is 2B(one word) in 16bpp // therefore 2B will hold 3/2 pixels #define PPW 3/2 // DCT mode - bit 0 : depth (0 = 16b, 1 = 24b), bit 1: in 16b mode, set STP(Semi-Transparency) bit 15. // 24bpp = 01b => 1 #define DCT_MODE 1 #else #define PPW 1 // 16bpp = 10b => 2 #define DCT_MODE 2 #endif // Stop playback if set static int endPlayback = 0; // STR file infos : Filename on CD, Width, Height, Length in frames static char * StrFileName = "\\COPY.STR;1"; static int StrFileX = 320; static int StrFileY = 240; static int StrFileLength = 893; // When using RGB24, a special routine has to be setup as a callback function to avoid MDEC/CDROM conflict // See http://psx.arthus.net/sdk/Psy-Q/DOCS/LibRef47.pdf , p.713 static void strCheckRGB24(); void init(void) { ResetCallback(); ResetGraph(0); // Initialize drawing engine with a complete reset (0) SetDefDispEnv(&disp[0], 0, 0 , SCREENXRES, SCREENYRES); // Set display area for both &disp[0] and &disp[1] SetDefDispEnv(&disp[1], 0, SCREENYRES, SCREENXRES, SCREENYRES); // &disp[0] is on top of &disp[1] SetDefDrawEnv(&draw[0], 0, SCREENYRES, SCREENXRES, SCREENYRES); // Set draw for both &draw[0] and &draw[1] SetDefDrawEnv(&draw[1], 0, 0 , SCREENXRES, SCREENYRES); // &draw[0] is below &draw[1] // Set video mode #if VMODE SetVideoMode(MODE_PAL); disp[0].disp.y = 8; disp[1].disp.y = 8; #endif SetDispMask(1); // Display on screen setRGB0(&draw[0], 155, 0, 150); // set color for first draw area setRGB0(&draw[1], 155, 0, 150); // set color for second draw area draw[0].isbg = 0; // set mask for draw areas. 1 means repainting the area with the RGB color each frame draw[1].isbg = 0; #if TRUECOL disp[0].isrgb24 = 1; disp[1].isrgb24 = 1; #endif PutDispEnv(&disp[db]); // set the disp and draw environnments PutDrawEnv(&draw[db]); FntLoad(960, 0); // Load font to vram at 960,0(+128) FntOpen(MARGINX, MARGINY, SCREENXRES - MARGINX * 2, FONTSIZE, 0, 280 ); // FntOpen(x, y, width, height, black_bg, max. nbr. chars } void display(void) { DrawSync(0); // Wait for all drawing to terminate VSync(0); // Wait for the next vertical blank PutDispEnv(&disp[db]); // set alternate disp and draw environnments PutDrawEnv(&draw[db]); db = !db; // flip db value (0 or 1) } int main() { // CD File descriptor CdlFILE STRfile; // Parameter we want to set the CDROM with u_char param=CdlModeSpeed; // Buffers total ~110KB in memory // SECTOR_SIZE is defined in words : 512 * 4 == 2048 Bytes/sector // Ring buffer : 32 * 2048 = 65536 Bytes u_long RingBuff[ RING_SIZE * SECTOR_SIZE ]; // VLC buffers : display area in words (hence /2), 160*320 == 38400 Bytes u_long VlcBuff[2][ SCREENXRES / 2 * StrFileY ]; // If using 16bpp, fetch 16xYres strips, if 24bpp, fetch 24xYres strips, 5120*PPW Bytes u_short ImgBuff[2][ 16 * PPW * StrFileY]; u_long * curVLCptr = VlcBuff[db]; // Init Disp/Draw env, Font, etc. init(); SpuInit(); // Init CDrom system CdInit(); // Reset the MDEC DecDCTReset(0); // Set callback routine DecDCToutCallback(strCheckRGB24); // Set ring buffer StSetRing(RingBuff, RING_SIZE); // Set streaming parameters StSetStream(TRUECOL, 1, StrFileLength, 0, 0); // Get the CD location of the STR file to play if ( CdSearchFile(&STRfile, StrFileName) == 0 ) { FntPrint("File not found :%s\n", StrFileName); } // Set the seek target position CdControl(CdlSetloc, (u_char *)&STRfile.pos, 0); // Set CD mode to CdlModeSpeed CdControl(CdlSetmode, ¶m, 0); // Read from CD at position &STRfile.pos // Enable streaming, double speed and ADPCM playback CdRead2(CdlModeStream|CdlModeSpeed|CdlModeRT); // Use a counter to avoid deadlocks int wait = WAIT_TIME; // Next Ring Buffer Frame address u_long * nextFrame = 0; // Ring buffer frame address u_long * frameAddr = 0; // Ring buffer frame header StHEADER * sectorHeader; // Main loop while (1) { // Set some pointers to the relevant buffer addresses u_long * curVLCptr = &VlcBuff[!db][0]; u_short * curIMGptr = &ImgBuff[db][0]; // While end of str is not reached, play it while (!endPlayback) { // Use this area to draw the slices RECT curSlice = { STR_POS_X, (db * StrFileY) + STR_POS_Y, // In 24bpp, use 24 pixels wide slices 16 * PPW , StrFileY}; int frameDone = 0; // Reset counter wait = WAIT_TIME; // Dont try decoding if not data has been loaded from ring buffer if ( frameAddr ){ // Begin decoding RLE-encoded MDEC image data DecDCTin( curVLCptr , DCT_MODE); // Prepare to receive the decoded image data from the MDEC while (curSlice.x < STR_POS_X + StrFileX * PPW) { // Receive decoded data : a 16*ppw*240 px slice in long word (4B), so / 2 DecDCTout( (u_long *) curIMGptr, curSlice.w * curSlice.h / 2); // Wait for transfer end DecDCToutSync(0); // Transfer data from main memory to VRAM LoadImage(&curSlice, (u_long *) curIMGptr ); // Wait for drawing termination DrawSync(0); // Increment drawArea's X with slice width (16 or 24 pix) curSlice.x += 16 * PPW; } // Set frameDone flag to 1 frameDone = 1; curSlice.x = STR_POS_X; curSlice.y = (db * StrFileY) + STR_POS_Y; } // Get one frame of ring buffer data // StGetNext is non-blocking, so we wait for it to return 0. // StGetNext will lock the region at &frameAddr until StFreeRing() is called. while ( StGetNext((u_long **)&frameAddr,(u_long **)§orHeader) ) { wait--; if (wait == 0) break; } // If the current frame's number is bigger than the number of frames in STR, // set the endPlayback flag. if (sectorHeader->frameCount >= StrFileLength) endPlayback = 1; // Grab a frame from the stream wait = WAIT_TIME; while ((nextFrame = frameAddr) == 0) { wait--; if ( wait == 0 ){ break; } } // Decode the Huffman/VLC compressed data DecDCTvlc(nextFrame, &VlcBuff[!db][0]); // Unlock area obtained by StGetNext() StFreeRing(nextFrame); // Reset counter wait = WAIT_TIME; // Wait until the whole frame is loaded to VRAM while ( frameDone == 0 ) { wait--; if ( wait == 0 ) { // If a timeout occurs, force switching buffers frameDone = 1; curSlice.x = STR_POS_X; curSlice.y = (db * StrFileY) + STR_POS_Y; } } FntFlush(-1); display(); } // Disable callback DecDCToutCallback(0); // Release two interrupt functions CdDataCallback() and CdReadyCallback() hooked by CDRead2() StUnSetRing(); // Put CDROM on pause at current position CdControlB(CdlPause, 0, 0); } return 0; }; static void strCheckRGB24() { /* From http://psx.arthus.net/sdk/Psy-Q/DOCS/, p.713 * When playing a movie in 24-bit mode, there is a potential hardware conflict between the CD subsystem * and the MDEC image decompression system which can result in corrupted data. To avoid this, * StCdInterrupt() may defer transferring a sector and instead set a flag variable called StCdInterFlag to * indicate that a CD sector is ready to be transferred. Once the MDEC is finished transferring data, your * application should check StCdIntrFlag and call StCdInterrupt() directly if it is set. */ #if TRUECOL extern int StCdIntrFlag; // If flag was set if ( StCdIntrFlag ) { // Trigger data transfer StCdInterrupt(); // Reset flag StCdIntrFlag = 0; } #endif }