// Draw a textured poly primitive
//
// With help from Nicolas Noble, Jaby smoll Seamonstah, Lameguy64
// 
// From ../psyq/addons/graphics/MESH/RMESH/TUTO0.C :
// Schnappy 2021

#include <sys/types.h>
#include <stdio.h>
#include <libgte.h>
#include <libetc.h>
#include <libgpu.h>

#define VMODE 0                 // Video Mode : 0 : NTSC, 1: PAL

#define SCREENXRES 320          // Screen width
#define SCREENYRES 240          // Screen height

#define CENTERX SCREENXRES/2    // Center of screen on x 
#define CENTERY SCREENYRES/2    // Center of screen on y

#define MARGINX 32               // margins for text display
#define MARGINY 32

#define FONTSIZE 8 * 5             // Text Field Height

#define OTLEN 8                    // Ordering Table Length 

DISPENV disp[2];                   // Double buffered DISPENV and DRAWENV
DRAWENV draw[2];

u_long ot[2][OTLEN];               // double ordering table of length 8 * 32 = 256 bits / 32 bytes

char primbuff[2][32768];     // double primitive buffer of length 32768 * 8 =  262.144 bits / 32,768 Kbytes

char *nextpri = primbuff[0];       // pointer to the next primitive in primbuff. Initially, points to the first bit of primbuff[0]

short db = 0;                      // index of which buffer is used, values 0, 1

// 16bpp TIM
extern unsigned long _binary____TIM_bousai_tim_start[];
extern unsigned long _binary____TIM_bousai_tim_end[];
extern unsigned long _binary____TIM_bousai_tim_length;

TIM_IMAGE bousai;
void LoadTexture(u_long * tim, TIM_IMAGE * tparam){     // This part is from Lameguy64's tutorial series : lameguy64.net/svn/pstutorials/chapter1/3-textures.html login/pw: annoyingmous
        OpenTIM(tim);                                   // Open the tim binary data, feed it the address of the data in memory
        ReadTIM(tparam);                                // This read the header of the TIM data and sets the corresponding members of the TIM_IMAGE structure
        
        LoadImage(tparam->prect, tparam->paddr);        // Transfer the data from memory to VRAM at position prect.x, prect.y
        DrawSync(0);                                    // Wait for the drawing to end
        
        if (tparam->mode & 0x8){ // check 4th bit       // If 4th bit == 1, TIM has a CLUT
            LoadImage(tparam->crect, tparam->caddr);    // Load it to VRAM at position crect.x, crect.y
            DrawSync(0);                                // Wait for drawing to end
    }
}

void init(void)
{
    ResetGraph(0);

    // Initialize and setup the GTE
    
    InitGeom();
    SetGeomOffset(CENTERX,CENTERY);
    SetGeomScreen(CENTERX);
    
    SetDefDispEnv(&disp[0], 0, 0, SCREENXRES, SCREENYRES);
    SetDefDispEnv(&disp[1], 0, SCREENYRES, SCREENXRES, SCREENYRES);
    
    SetDefDrawEnv(&draw[0], 0, SCREENYRES, SCREENXRES, SCREENYRES);
    SetDefDrawEnv(&draw[1], 0, 0, SCREENXRES, SCREENYRES);
    
    if (VMODE)
    {
        SetVideoMode(MODE_PAL);
        disp[0].screen.y += 8;
        disp[1].screen.y += 8;
    }
    SetDispMask(1);                 // Display on screen    

    setRGB0(&draw[0], 128, 128, 128);
    setRGB0(&draw[1], 128, 128, 128);
    
    draw[0].isbg = 1;
    draw[1].isbg = 1;
    
    PutDispEnv(&disp[db]);
    PutDrawEnv(&draw[db]);
    
    FntLoad(960, 0);
    FntOpen(MARGINX, SCREENYRES - MARGINY - FONTSIZE, SCREENXRES - MARGINX * 2, FONTSIZE, 0, 280 );
    
}

void display(void)
{
    DrawSync(0);
    VSync(0);
    
    PutDispEnv(&disp[db]);
    PutDrawEnv(&draw[db]);
    
    DrawOTag(&ot[db][OTLEN - 1]);
    
    db = !db;
    
    nextpri = primbuff[db];
}


int main(void)
{
        
    POLY_FT4 *poly = {0};                           // pointer to a POLY_G4 
    SVECTOR RotVector = {0, 0, 0};                  // Initialize rotation vector {x, y, z}
    VECTOR  MovVector = {0, 0, CENTERX/2, 0};               // Initialize translation vector {x, y, z, pad}
    VECTOR  ScaleVector = {ONE, ONE, ONE};          // ONE is define as 4096 in libgte.h
    
    SVECTOR VertPos[4] = {                          // Set initial vertices position relative to 0,0 - see here : https://psx.arthus.net/docs/poly_f4.jpg
            {-32, -32, 1 },                         // Vert 1 
            {-32,  32, 1 },                         // Vert 2
            { 32, -32, 1 },                         // Vert 3
            { 32,  32, 1  }                         // Vert 4
        };                                          
    MATRIX PolyMatrix = {0};                   
        
    long polydepth;
    long polyflag;
    
    int ping = 0;
    
    init();
    
    LoadTexture(_binary____TIM_bousai_tim_start, &bousai);
    
    while (1)
    {
        ClearOTagR(ot[db], OTLEN);
        
        poly = (POLY_FT4 *)nextpri;                    // Set poly to point to  the address of the next primitiv in the buffer
        
        // Set transform matrices for this polygon
                
        RotMatrix(&RotVector, &PolyMatrix);           // Apply rotation matrix
        TransMatrix(&PolyMatrix, &MovVector);         // Apply translation matrix   
        ScaleMatrix(&PolyMatrix, &ScaleVector);       // Apply scale matrix   
        
        SetRotMatrix(&PolyMatrix);                    // Set default rotation matrix
        SetTransMatrix(&PolyMatrix);                  // Set default transformation matrix
        
        setPolyFT4(poly);                             // Initialize poly as a POLY_F4 
        
        poly->tpage = getTPage(bousai.mode&0x3, 0, bousai.prect->x, bousai.prect->y);   // Get Tpage coordinates from the TIM_IMAGE mode and prect members.
        
        setRGB0(poly, 128, 128, 128);                 // Set poly color (neutra here)
        
        RotTransPers4(
                    &VertPos[0],      &VertPos[1],      &VertPos[2],      &VertPos[3],
                    (long*)&poly->x0, (long*)&poly->x1, (long*)&poly->x2, (long*)&poly->x3,
                    &polydepth,
                    &polyflag
                    );                                 // Perform coordinate and perspective transformation for 4 vertices
        
        setUV4(poly, 0, 0, 0, 144, 144, 0, 144, 144);  // Set UV coordinates in order Top Left, Bottom Left, Top Right, Bottom Right 

        
        // Let's have some fun on the Z axis

        if(!ping){
            if (MovVector.vz < CENTERX){               // While Poly position on Z axis is < 160, push it
                MovVector.vz += 1;                     // Push on Z axis
            } else {
                ping = !ping;                          // Switch ping value
            }
        }
        
        if(ping){
            if (MovVector.vz > CENTERX/2){              // While Poly position on Z axis is > 80, pull it
                MovVector.vz -= 1;                      // Pull on Z axis
            } else {
                ping = !ping;                           // Switch ping value
            }
        }
            
            
        addPrim(ot[db], poly);                         // add poly to the Ordering table
        
        nextpri += sizeof(POLY_FT4);                    // increment nextpri address with size of a POLY_F4 struct 
    
        FntPrint("Hello textured poly  !");                   
    
        FntFlush(-1);
        
        display();
        }
    return 0;
    }