# picoti

![Outside](./picote-outside.jpg)
![Inside](./picote-inside.jpg)

Use a rpi pico and push buttons to send key strokes to a computer.

This is the companion project to the [Stopi](/arthus/stopi) stop-motion software.  

## Software setup

 1. Upload 'code.py' and the 'lib' folder to the rpi pico
 2. Done

## Hadware setup

 * 5 push buttons
 * 1 ON/OFF switch with indicator light or a separate LED
 * 1 330Ω resistor

![The crude diagram](./picote-s.jpg)