mirror of
https://forge.apps.education.fr/blender-edutech/blender-edutech-tutoriels.git
synced 2024-01-27 09:42:33 +01:00
Ajout des propriétés à Bille : chute et victoire
This commit is contained in:
parent
f01b5f5426
commit
9b7697e00f
@ -1,84 +0,0 @@
|
|||||||
#include "Wire.h"
|
|
||||||
#include "MPU6050.h"
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* 4-labyrinthe-imu.ino
|
|
||||||
* @title: Programme pour la carte Arduino de gestion de centrale inertielle (capteur IMU)
|
|
||||||
* @project: Blender-EduTech - Tutoriel 4 : Labyrinthe à bille - Interfacer avec une carte Arduino par la liaision série
|
|
||||||
* @lang: fr
|
|
||||||
* @authors: Philippe Roy <philippe.roy@ac-grenoble.fr>
|
|
||||||
* @copyright: Copyright (C) 2023 Philippe Roy
|
|
||||||
* @license: GNU GPL
|
|
||||||
*
|
|
||||||
******************************************************************************/
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* IMU - I2C
|
|
||||||
******************************************************************************/
|
|
||||||
|
|
||||||
MPU6050 accelgyro;
|
|
||||||
|
|
||||||
int16_t ax, ay, az;
|
|
||||||
int16_t gx, gy, gz;
|
|
||||||
int16_t mx, my, mz;
|
|
||||||
float Axyz[3];
|
|
||||||
float roll;
|
|
||||||
float pitch;
|
|
||||||
float roll_deg;
|
|
||||||
float pitch_deg;
|
|
||||||
String roll_txt;
|
|
||||||
String pitch_txt;
|
|
||||||
String serial_msg_int_txt;
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* Communication serie
|
|
||||||
******************************************************************************/
|
|
||||||
|
|
||||||
String serial_msg = ""; // Message
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* Initialisation
|
|
||||||
******************************************************************************/
|
|
||||||
|
|
||||||
void setup() {
|
|
||||||
|
|
||||||
// Liaison série
|
|
||||||
Serial.begin(115200);
|
|
||||||
|
|
||||||
// IMU
|
|
||||||
Wire.begin();
|
|
||||||
accelgyro.initialize();
|
|
||||||
}
|
|
||||||
|
|
||||||
/******************************************************************************
|
|
||||||
* Boucle principale
|
|
||||||
******************************************************************************/
|
|
||||||
|
|
||||||
void loop() {
|
|
||||||
|
|
||||||
/*****
|
|
||||||
* Lecture des accélérations
|
|
||||||
*****/
|
|
||||||
|
|
||||||
accelgyro.getMotion9(&ax, &ay, &az, &gx, &gy, &gz, &mx, &my, &mz);
|
|
||||||
Axyz[0] = (double) ax / 16384;
|
|
||||||
Axyz[1] = (double) ay / 16384;
|
|
||||||
Axyz[2] = (double) az / 16384;
|
|
||||||
roll = asin(-Axyz[0]);
|
|
||||||
roll_deg = roll*57.3;
|
|
||||||
roll_txt = String(roll_deg);
|
|
||||||
pitch = -asin(Axyz[1]/cos(roll)); // position capteur (X vers la gauche, Y vers l'arriere, Z vers le haut)
|
|
||||||
pitch_deg = pitch*57.3;
|
|
||||||
pitch_txt = String(pitch_deg);
|
|
||||||
|
|
||||||
/*****
|
|
||||||
* IMU : Arduino -> UPBGE
|
|
||||||
*****/
|
|
||||||
|
|
||||||
Serial.print(roll_txt);
|
|
||||||
Serial.print(",");
|
|
||||||
Serial.print(pitch_txt);
|
|
||||||
Serial.println();
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
File diff suppressed because it is too large
Load Diff
@ -1,272 +0,0 @@
|
|||||||
// I2Cdev library collection - Main I2C device class header file
|
|
||||||
// Abstracts bit and byte I2C R/W functions into a convenient class
|
|
||||||
// 6/9/2012 by Jeff Rowberg <jeff@rowberg.net>
|
|
||||||
//
|
|
||||||
// Changelog:
|
|
||||||
// 2012-06-09 - fix major issue with reading > 32 bytes at a time with Arduino Wire
|
|
||||||
// - add compiler warnings when using outdated or IDE or limited I2Cdev implementation
|
|
||||||
// 2011-11-01 - fix write*Bits mask calculation (thanks sasquatch @ Arduino forums)
|
|
||||||
// 2011-10-03 - added automatic Arduino version detection for ease of use
|
|
||||||
// 2011-10-02 - added Gene Knight's NBWire TwoWire class implementation with small modifications
|
|
||||||
// 2011-08-31 - added support for Arduino 1.0 Wire library (methods are different from 0.x)
|
|
||||||
// 2011-08-03 - added optional timeout parameter to read* methods to easily change from default
|
|
||||||
// 2011-08-02 - added support for 16-bit registers
|
|
||||||
// - fixed incorrect Doxygen comments on some methods
|
|
||||||
// - added timeout value for read operations (thanks mem @ Arduino forums)
|
|
||||||
// 2011-07-30 - changed read/write function structures to return success or byte counts
|
|
||||||
// - made all methods static for multi-device memory savings
|
|
||||||
// 2011-07-28 - initial release
|
|
||||||
|
|
||||||
/* ============================================
|
|
||||||
I2Cdev device library code is placed under the MIT license
|
|
||||||
Copyright (c) 2012 Jeff Rowberg
|
|
||||||
|
|
||||||
Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
||||||
of this software and associated documentation files (the "Software"), to deal
|
|
||||||
in the Software without restriction, including without limitation the rights
|
|
||||||
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
||||||
copies of the Software, and to permit persons to whom the Software is
|
|
||||||
furnished to do so, subject to the following conditions:
|
|
||||||
|
|
||||||
The above copyright notice and this permission notice shall be included in
|
|
||||||
all copies or substantial portions of the Software.
|
|
||||||
|
|
||||||
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
||||||
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
||||||
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
||||||
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
||||||
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
||||||
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
||||||
THE SOFTWARE.
|
|
||||||
===============================================
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef _I2CDEV_H_
|
|
||||||
#define _I2CDEV_H_
|
|
||||||
|
|
||||||
// -----------------------------------------------------------------------------
|
|
||||||
// I2C interface implementation setting
|
|
||||||
// -----------------------------------------------------------------------------
|
|
||||||
#define I2CDEV_IMPLEMENTATION I2CDEV_ARDUINO_WIRE
|
|
||||||
|
|
||||||
// comment this out if you are using a non-optimal IDE/implementation setting
|
|
||||||
// but want the compiler to shut up about it
|
|
||||||
#define I2CDEV_IMPLEMENTATION_WARNINGS
|
|
||||||
|
|
||||||
// -----------------------------------------------------------------------------
|
|
||||||
// I2C interface implementation options
|
|
||||||
// -----------------------------------------------------------------------------
|
|
||||||
#define I2CDEV_ARDUINO_WIRE 1 // Wire object from Arduino
|
|
||||||
#define I2CDEV_BUILTIN_NBWIRE 2 // Tweaked Wire object from Gene Knight's NBWire project
|
|
||||||
// ^^^ NBWire implementation is still buggy w/some interrupts!
|
|
||||||
#define I2CDEV_BUILTIN_FASTWIRE 3 // FastWire object from Francesco Ferrara's project
|
|
||||||
// ^^^ FastWire implementation in I2Cdev is INCOMPLETE!
|
|
||||||
|
|
||||||
// -----------------------------------------------------------------------------
|
|
||||||
// Arduino-style "Serial.print" debug constant (uncomment to enable)
|
|
||||||
// -----------------------------------------------------------------------------
|
|
||||||
//#define I2CDEV_SERIAL_DEBUG
|
|
||||||
|
|
||||||
#ifdef ARDUINO
|
|
||||||
#if ARDUINO < 100
|
|
||||||
#include "WProgram.h"
|
|
||||||
#else
|
|
||||||
#include "Arduino.h"
|
|
||||||
#endif
|
|
||||||
#if I2CDEV_IMPLEMENTATION == I2CDEV_ARDUINO_WIRE
|
|
||||||
#include <Wire.h>
|
|
||||||
#endif
|
|
||||||
#else
|
|
||||||
#include "ArduinoWrapper.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// support Arduino M0
|
|
||||||
#ifndef BUFFER_LENGTH
|
|
||||||
#define BUFFER_LENGTH 64
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// 1000ms default read timeout (modify with "I2Cdev::readTimeout = [ms];")
|
|
||||||
#define I2CDEV_DEFAULT_READ_TIMEOUT 1000
|
|
||||||
|
|
||||||
class I2Cdev {
|
|
||||||
public:
|
|
||||||
I2Cdev();
|
|
||||||
|
|
||||||
static int8_t readBit(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint8_t* data,
|
|
||||||
uint16_t timeout = I2Cdev::readTimeout);
|
|
||||||
static int8_t readBitW(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint16_t* data,
|
|
||||||
uint16_t timeout = I2Cdev::readTimeout);
|
|
||||||
static int8_t readBits(uint8_t devAddr, uint8_t regAddr, uint8_t bitStart, uint8_t length, uint8_t* data,
|
|
||||||
uint16_t timeout = I2Cdev::readTimeout);
|
|
||||||
static int8_t readBitsW(uint8_t devAddr, uint8_t regAddr, uint8_t bitStart, uint8_t length, uint16_t* data,
|
|
||||||
uint16_t timeout = I2Cdev::readTimeout);
|
|
||||||
static int8_t readByte(uint8_t devAddr, uint8_t regAddr, uint8_t* data, uint16_t timeout = I2Cdev::readTimeout);
|
|
||||||
static int8_t readWord(uint8_t devAddr, uint8_t regAddr, uint16_t* data, uint16_t timeout = I2Cdev::readTimeout);
|
|
||||||
static int8_t readBytes(uint8_t devAddr, uint8_t regAddr, uint8_t length, uint8_t* data,
|
|
||||||
uint16_t timeout = I2Cdev::readTimeout);
|
|
||||||
static int8_t readWords(uint8_t devAddr, uint8_t regAddr, uint8_t length, uint16_t* data,
|
|
||||||
uint16_t timeout = I2Cdev::readTimeout);
|
|
||||||
|
|
||||||
static bool writeBit(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint8_t data);
|
|
||||||
static bool writeBitW(uint8_t devAddr, uint8_t regAddr, uint8_t bitNum, uint16_t data);
|
|
||||||
static bool writeBits(uint8_t devAddr, uint8_t regAddr, uint8_t bitStart, uint8_t length, uint8_t data);
|
|
||||||
static bool writeBitsW(uint8_t devAddr, uint8_t regAddr, uint8_t bitStart, uint8_t length, uint16_t data);
|
|
||||||
static bool writeByte(uint8_t devAddr, uint8_t regAddr, uint8_t data);
|
|
||||||
static bool writeWord(uint8_t devAddr, uint8_t regAddr, uint16_t data);
|
|
||||||
static bool writeBytes(uint8_t devAddr, uint8_t regAddr, uint8_t length, uint8_t* data);
|
|
||||||
static bool writeWords(uint8_t devAddr, uint8_t regAddr, uint8_t length, uint16_t* data);
|
|
||||||
|
|
||||||
static uint16_t readTimeout;
|
|
||||||
};
|
|
||||||
|
|
||||||
#if I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_FASTWIRE
|
|
||||||
//////////////////////
|
|
||||||
// FastWire 0.2
|
|
||||||
// This is a library to help faster programs to read I2C devices.
|
|
||||||
// Copyright(C) 2011
|
|
||||||
// Francesco Ferrara
|
|
||||||
//////////////////////
|
|
||||||
|
|
||||||
/* Master */
|
|
||||||
#define TW_START 0x08
|
|
||||||
#define TW_REP_START 0x10
|
|
||||||
|
|
||||||
/* Master Transmitter */
|
|
||||||
#define TW_MT_SLA_ACK 0x18
|
|
||||||
#define TW_MT_SLA_NACK 0x20
|
|
||||||
#define TW_MT_DATA_ACK 0x28
|
|
||||||
#define TW_MT_DATA_NACK 0x30
|
|
||||||
#define TW_MT_ARB_LOST 0x38
|
|
||||||
|
|
||||||
/* Master Receiver */
|
|
||||||
#define TW_MR_ARB_LOST 0x38
|
|
||||||
#define TW_MR_SLA_ACK 0x40
|
|
||||||
#define TW_MR_SLA_NACK 0x48
|
|
||||||
#define TW_MR_DATA_ACK 0x50
|
|
||||||
#define TW_MR_DATA_NACK 0x58
|
|
||||||
|
|
||||||
#define TW_OK 0
|
|
||||||
#define TW_ERROR 1
|
|
||||||
|
|
||||||
class Fastwire {
|
|
||||||
private:
|
|
||||||
static boolean waitInt();
|
|
||||||
|
|
||||||
public:
|
|
||||||
static void setup(int khz, boolean pullup);
|
|
||||||
static byte write(byte device, byte address, byte value);
|
|
||||||
static byte readBuf(byte device, byte address, byte* data, byte num);
|
|
||||||
};
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_NBWIRE
|
|
||||||
// NBWire implementation based heavily on code by Gene Knight <Gene@Telobot.com>
|
|
||||||
// Originally posted on the Arduino forum at http://arduino.cc/forum/index.php/topic,70705.0.html
|
|
||||||
// Originally offered to the i2cdevlib project at http://arduino.cc/forum/index.php/topic,68210.30.html
|
|
||||||
|
|
||||||
#define NBWIRE_BUFFER_LENGTH 32
|
|
||||||
|
|
||||||
class TwoWire {
|
|
||||||
private:
|
|
||||||
static uint8_t rxBuffer[];
|
|
||||||
static uint8_t rxBufferIndex;
|
|
||||||
static uint8_t rxBufferLength;
|
|
||||||
|
|
||||||
static uint8_t txAddress;
|
|
||||||
static uint8_t txBuffer[];
|
|
||||||
static uint8_t txBufferIndex;
|
|
||||||
static uint8_t txBufferLength;
|
|
||||||
|
|
||||||
// static uint8_t transmitting;
|
|
||||||
static void (*user_onRequest)(void);
|
|
||||||
static void (*user_onReceive)(int);
|
|
||||||
static void onRequestService(void);
|
|
||||||
static void onReceiveService(uint8_t*, int);
|
|
||||||
|
|
||||||
public:
|
|
||||||
TwoWire();
|
|
||||||
void begin();
|
|
||||||
void begin(uint8_t);
|
|
||||||
void begin(int);
|
|
||||||
void beginTransmission(uint8_t);
|
|
||||||
//void beginTransmission(int);
|
|
||||||
uint8_t endTransmission(uint16_t timeout = 0);
|
|
||||||
void nbendTransmission(void (*function)(int)) ;
|
|
||||||
uint8_t requestFrom(uint8_t, int, uint16_t timeout = 0);
|
|
||||||
//uint8_t requestFrom(int, int);
|
|
||||||
void nbrequestFrom(uint8_t, int, void (*function)(int));
|
|
||||||
void send(uint8_t);
|
|
||||||
void send(uint8_t*, uint8_t);
|
|
||||||
//void send(int);
|
|
||||||
void send(char*);
|
|
||||||
uint8_t available(void);
|
|
||||||
uint8_t receive(void);
|
|
||||||
void onReceive(void (*)(int));
|
|
||||||
void onRequest(void (*)(void));
|
|
||||||
};
|
|
||||||
|
|
||||||
#define TWI_READY 0
|
|
||||||
#define TWI_MRX 1
|
|
||||||
#define TWI_MTX 2
|
|
||||||
#define TWI_SRX 3
|
|
||||||
#define TWI_STX 4
|
|
||||||
|
|
||||||
#define TW_WRITE 0
|
|
||||||
#define TW_READ 1
|
|
||||||
|
|
||||||
#define TW_MT_SLA_NACK 0x20
|
|
||||||
#define TW_MT_DATA_NACK 0x30
|
|
||||||
|
|
||||||
#define CPU_FREQ 16000000L
|
|
||||||
#define TWI_FREQ 100000L
|
|
||||||
#define TWI_BUFFER_LENGTH 32
|
|
||||||
|
|
||||||
/* TWI Status is in TWSR, in the top 5 bits: TWS7 - TWS3 */
|
|
||||||
|
|
||||||
#define TW_STATUS_MASK (_BV(TWS7)|_BV(TWS6)|_BV(TWS5)|_BV(TWS4)|_BV(TWS3))
|
|
||||||
#define TW_STATUS (TWSR & TW_STATUS_MASK)
|
|
||||||
#define TW_START 0x08
|
|
||||||
#define TW_REP_START 0x10
|
|
||||||
#define TW_MT_SLA_ACK 0x18
|
|
||||||
#define TW_MT_SLA_NACK 0x20
|
|
||||||
#define TW_MT_DATA_ACK 0x28
|
|
||||||
#define TW_MT_DATA_NACK 0x30
|
|
||||||
#define TW_MT_ARB_LOST 0x38
|
|
||||||
#define TW_MR_ARB_LOST 0x38
|
|
||||||
#define TW_MR_SLA_ACK 0x40
|
|
||||||
#define TW_MR_SLA_NACK 0x48
|
|
||||||
#define TW_MR_DATA_ACK 0x50
|
|
||||||
#define TW_MR_DATA_NACK 0x58
|
|
||||||
#define TW_ST_SLA_ACK 0xA8
|
|
||||||
#define TW_ST_ARB_LOST_SLA_ACK 0xB0
|
|
||||||
#define TW_ST_DATA_ACK 0xB8
|
|
||||||
#define TW_ST_DATA_NACK 0xC0
|
|
||||||
#define TW_ST_LAST_DATA 0xC8
|
|
||||||
#define TW_SR_SLA_ACK 0x60
|
|
||||||
#define TW_SR_ARB_LOST_SLA_ACK 0x68
|
|
||||||
#define TW_SR_GCALL_ACK 0x70
|
|
||||||
#define TW_SR_ARB_LOST_GCALL_ACK 0x78
|
|
||||||
#define TW_SR_DATA_ACK 0x80
|
|
||||||
#define TW_SR_DATA_NACK 0x88
|
|
||||||
#define TW_SR_GCALL_DATA_ACK 0x90
|
|
||||||
#define TW_SR_GCALL_DATA_NACK 0x98
|
|
||||||
#define TW_SR_STOP 0xA0
|
|
||||||
#define TW_NO_INFO 0xF8
|
|
||||||
#define TW_BUS_ERROR 0x00
|
|
||||||
|
|
||||||
//#define _MMIO_BYTE(mem_addr) (*(volatile uint8_t *)(mem_addr))
|
|
||||||
//#define _SFR_BYTE(sfr) _MMIO_BYTE(_SFR_ADDR(sfr))
|
|
||||||
|
|
||||||
#ifndef sbi // set bit
|
|
||||||
#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
|
|
||||||
#endif // sbi
|
|
||||||
|
|
||||||
#ifndef cbi // clear bit
|
|
||||||
#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
|
|
||||||
#endif // cbi
|
|
||||||
|
|
||||||
extern TwoWire Wire;
|
|
||||||
|
|
||||||
#endif // I2CDEV_IMPLEMENTATION == I2CDEV_BUILTIN_NBWIRE
|
|
||||||
|
|
||||||
#endif /* _I2CDEV_H_ */
|
|
||||||
File diff suppressed because it is too large
Load Diff
@ -1,997 +0,0 @@
|
|||||||
// I2Cdev library collection - MPU6050 I2C device class
|
|
||||||
// Based on InvenSense MPU-6050 register map document rev. 2.0, 5/19/2011 (RM-MPU-6000A-00)
|
|
||||||
// 10/3/2011 by Jeff Rowberg <jeff@rowberg.net>
|
|
||||||
// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
|
|
||||||
//
|
|
||||||
// Changelog:
|
|
||||||
// ... - ongoing debug release
|
|
||||||
|
|
||||||
// NOTE: THIS IS ONLY A PARIAL RELEASE. THIS DEVICE CLASS IS CURRENTLY UNDERGOING ACTIVE
|
|
||||||
// DEVELOPMENT AND IS STILL MISSING SOME IMPORTANT FEATURES. PLEASE KEEP THIS IN MIND IF
|
|
||||||
// YOU DECIDE TO USE THIS PARTICULAR CODE FOR ANYTHING.
|
|
||||||
|
|
||||||
/* ============================================
|
|
||||||
I2Cdev device library code is placed under the MIT license
|
|
||||||
Copyright (c) 2012 Jeff Rowberg
|
|
||||||
|
|
||||||
Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
||||||
of this software and associated documentation files (the "Software"), to deal
|
|
||||||
in the Software without restriction, including without limitation the rights
|
|
||||||
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
||||||
copies of the Software, and to permit persons to whom the Software is
|
|
||||||
furnished to do so, subject to the following conditions:
|
|
||||||
|
|
||||||
The above copyright notice and this permission notice shall be included in
|
|
||||||
all copies or substantial portions of the Software.
|
|
||||||
|
|
||||||
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
||||||
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
||||||
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
||||||
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
||||||
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
||||||
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
||||||
THE SOFTWARE.
|
|
||||||
===============================================
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef _MPU6050_H_
|
|
||||||
#define _MPU6050_H_
|
|
||||||
|
|
||||||
#include "I2Cdev.h"
|
|
||||||
#include <avr/pgmspace.h>
|
|
||||||
|
|
||||||
//Magnetometer Registers
|
|
||||||
#define MPU9150_RA_MAG_ADDRESS 0x0C
|
|
||||||
#define MPU9150_RA_MAG_XOUT_L 0x03
|
|
||||||
#define MPU9150_RA_MAG_XOUT_H 0x04
|
|
||||||
#define MPU9150_RA_MAG_YOUT_L 0x05
|
|
||||||
#define MPU9150_RA_MAG_YOUT_H 0x06
|
|
||||||
#define MPU9150_RA_MAG_ZOUT_L 0x07
|
|
||||||
#define MPU9150_RA_MAG_ZOUT_H 0x08
|
|
||||||
|
|
||||||
#define MPU6050_ADDRESS_AD0_LOW 0x68 // address pin low (GND), default for InvenSense evaluation board
|
|
||||||
#define MPU6050_ADDRESS_AD0_HIGH 0x69 // address pin high (VCC)
|
|
||||||
#define MPU6050_DEFAULT_ADDRESS MPU6050_ADDRESS_AD0_LOW
|
|
||||||
|
|
||||||
#define MPU6050_RA_XG_OFFS_TC 0x00 //[7] PWR_MODE, [6:1] XG_OFFS_TC, [0] OTP_BNK_VLD
|
|
||||||
#define MPU6050_RA_YG_OFFS_TC 0x01 //[7] PWR_MODE, [6:1] YG_OFFS_TC, [0] OTP_BNK_VLD
|
|
||||||
#define MPU6050_RA_ZG_OFFS_TC 0x02 //[7] PWR_MODE, [6:1] ZG_OFFS_TC, [0] OTP_BNK_VLD
|
|
||||||
#define MPU6050_RA_X_FINE_GAIN 0x03 //[7:0] X_FINE_GAIN
|
|
||||||
#define MPU6050_RA_Y_FINE_GAIN 0x04 //[7:0] Y_FINE_GAIN
|
|
||||||
#define MPU6050_RA_Z_FINE_GAIN 0x05 //[7:0] Z_FINE_GAIN
|
|
||||||
#define MPU6050_RA_XA_OFFS_H 0x06 //[15:0] XA_OFFS
|
|
||||||
#define MPU6050_RA_XA_OFFS_L_TC 0x07
|
|
||||||
#define MPU6050_RA_YA_OFFS_H 0x08 //[15:0] YA_OFFS
|
|
||||||
#define MPU6050_RA_YA_OFFS_L_TC 0x09
|
|
||||||
#define MPU6050_RA_ZA_OFFS_H 0x0A //[15:0] ZA_OFFS
|
|
||||||
#define MPU6050_RA_ZA_OFFS_L_TC 0x0B
|
|
||||||
#define MPU6050_RA_XG_OFFS_USRH 0x13 //[15:0] XG_OFFS_USR
|
|
||||||
#define MPU6050_RA_XG_OFFS_USRL 0x14
|
|
||||||
#define MPU6050_RA_YG_OFFS_USRH 0x15 //[15:0] YG_OFFS_USR
|
|
||||||
#define MPU6050_RA_YG_OFFS_USRL 0x16
|
|
||||||
#define MPU6050_RA_ZG_OFFS_USRH 0x17 //[15:0] ZG_OFFS_USR
|
|
||||||
#define MPU6050_RA_ZG_OFFS_USRL 0x18
|
|
||||||
#define MPU6050_RA_SMPLRT_DIV 0x19
|
|
||||||
#define MPU6050_RA_CONFIG 0x1A
|
|
||||||
#define MPU6050_RA_GYRO_CONFIG 0x1B
|
|
||||||
#define MPU6050_RA_ACCEL_CONFIG 0x1C
|
|
||||||
#define MPU6050_RA_FF_THR 0x1D
|
|
||||||
#define MPU6050_RA_FF_DUR 0x1E
|
|
||||||
#define MPU6050_RA_MOT_THR 0x1F
|
|
||||||
#define MPU6050_RA_MOT_DUR 0x20
|
|
||||||
#define MPU6050_RA_ZRMOT_THR 0x21
|
|
||||||
#define MPU6050_RA_ZRMOT_DUR 0x22
|
|
||||||
#define MPU6050_RA_FIFO_EN 0x23
|
|
||||||
#define MPU6050_RA_I2C_MST_CTRL 0x24
|
|
||||||
#define MPU6050_RA_I2C_SLV0_ADDR 0x25
|
|
||||||
#define MPU6050_RA_I2C_SLV0_REG 0x26
|
|
||||||
#define MPU6050_RA_I2C_SLV0_CTRL 0x27
|
|
||||||
#define MPU6050_RA_I2C_SLV1_ADDR 0x28
|
|
||||||
#define MPU6050_RA_I2C_SLV1_REG 0x29
|
|
||||||
#define MPU6050_RA_I2C_SLV1_CTRL 0x2A
|
|
||||||
#define MPU6050_RA_I2C_SLV2_ADDR 0x2B
|
|
||||||
#define MPU6050_RA_I2C_SLV2_REG 0x2C
|
|
||||||
#define MPU6050_RA_I2C_SLV2_CTRL 0x2D
|
|
||||||
#define MPU6050_RA_I2C_SLV3_ADDR 0x2E
|
|
||||||
#define MPU6050_RA_I2C_SLV3_REG 0x2F
|
|
||||||
#define MPU6050_RA_I2C_SLV3_CTRL 0x30
|
|
||||||
#define MPU6050_RA_I2C_SLV4_ADDR 0x31
|
|
||||||
#define MPU6050_RA_I2C_SLV4_REG 0x32
|
|
||||||
#define MPU6050_RA_I2C_SLV4_DO 0x33
|
|
||||||
#define MPU6050_RA_I2C_SLV4_CTRL 0x34
|
|
||||||
#define MPU6050_RA_I2C_SLV4_DI 0x35
|
|
||||||
#define MPU6050_RA_I2C_MST_STATUS 0x36
|
|
||||||
#define MPU6050_RA_INT_PIN_CFG 0x37
|
|
||||||
#define MPU6050_RA_INT_ENABLE 0x38
|
|
||||||
#define MPU6050_RA_DMP_INT_STATUS 0x39
|
|
||||||
#define MPU6050_RA_INT_STATUS 0x3A
|
|
||||||
#define MPU6050_RA_ACCEL_XOUT_H 0x3B
|
|
||||||
#define MPU6050_RA_ACCEL_XOUT_L 0x3C
|
|
||||||
#define MPU6050_RA_ACCEL_YOUT_H 0x3D
|
|
||||||
#define MPU6050_RA_ACCEL_YOUT_L 0x3E
|
|
||||||
#define MPU6050_RA_ACCEL_ZOUT_H 0x3F
|
|
||||||
#define MPU6050_RA_ACCEL_ZOUT_L 0x40
|
|
||||||
#define MPU6050_RA_TEMP_OUT_H 0x41
|
|
||||||
#define MPU6050_RA_TEMP_OUT_L 0x42
|
|
||||||
#define MPU6050_RA_GYRO_XOUT_H 0x43
|
|
||||||
#define MPU6050_RA_GYRO_XOUT_L 0x44
|
|
||||||
#define MPU6050_RA_GYRO_YOUT_H 0x45
|
|
||||||
#define MPU6050_RA_GYRO_YOUT_L 0x46
|
|
||||||
#define MPU6050_RA_GYRO_ZOUT_H 0x47
|
|
||||||
#define MPU6050_RA_GYRO_ZOUT_L 0x48
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_00 0x49
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_01 0x4A
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_02 0x4B
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_03 0x4C
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_04 0x4D
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_05 0x4E
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_06 0x4F
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_07 0x50
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_08 0x51
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_09 0x52
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_10 0x53
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_11 0x54
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_12 0x55
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_13 0x56
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_14 0x57
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_15 0x58
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_16 0x59
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_17 0x5A
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_18 0x5B
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_19 0x5C
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_20 0x5D
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_21 0x5E
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_22 0x5F
|
|
||||||
#define MPU6050_RA_EXT_SENS_DATA_23 0x60
|
|
||||||
#define MPU6050_RA_MOT_DETECT_STATUS 0x61
|
|
||||||
#define MPU6050_RA_I2C_SLV0_DO 0x63
|
|
||||||
#define MPU6050_RA_I2C_SLV1_DO 0x64
|
|
||||||
#define MPU6050_RA_I2C_SLV2_DO 0x65
|
|
||||||
#define MPU6050_RA_I2C_SLV3_DO 0x66
|
|
||||||
#define MPU6050_RA_I2C_MST_DELAY_CTRL 0x67
|
|
||||||
#define MPU6050_RA_SIGNAL_PATH_RESET 0x68
|
|
||||||
#define MPU6050_RA_MOT_DETECT_CTRL 0x69
|
|
||||||
#define MPU6050_RA_USER_CTRL 0x6A
|
|
||||||
#define MPU6050_RA_PWR_MGMT_1 0x6B
|
|
||||||
#define MPU6050_RA_PWR_MGMT_2 0x6C
|
|
||||||
#define MPU6050_RA_BANK_SEL 0x6D
|
|
||||||
#define MPU6050_RA_MEM_START_ADDR 0x6E
|
|
||||||
#define MPU6050_RA_MEM_R_W 0x6F
|
|
||||||
#define MPU6050_RA_DMP_CFG_1 0x70
|
|
||||||
#define MPU6050_RA_DMP_CFG_2 0x71
|
|
||||||
#define MPU6050_RA_FIFO_COUNTH 0x72
|
|
||||||
#define MPU6050_RA_FIFO_COUNTL 0x73
|
|
||||||
#define MPU6050_RA_FIFO_R_W 0x74
|
|
||||||
#define MPU6050_RA_WHO_AM_I 0x75
|
|
||||||
|
|
||||||
#define MPU6050_TC_PWR_MODE_BIT 7
|
|
||||||
#define MPU6050_TC_OFFSET_BIT 6
|
|
||||||
#define MPU6050_TC_OFFSET_LENGTH 6
|
|
||||||
#define MPU6050_TC_OTP_BNK_VLD_BIT 0
|
|
||||||
|
|
||||||
#define MPU6050_VDDIO_LEVEL_VLOGIC 0
|
|
||||||
#define MPU6050_VDDIO_LEVEL_VDD 1
|
|
||||||
|
|
||||||
#define MPU6050_CFG_EXT_SYNC_SET_BIT 5
|
|
||||||
#define MPU6050_CFG_EXT_SYNC_SET_LENGTH 3
|
|
||||||
#define MPU6050_CFG_DLPF_CFG_BIT 2
|
|
||||||
#define MPU6050_CFG_DLPF_CFG_LENGTH 3
|
|
||||||
|
|
||||||
#define MPU6050_EXT_SYNC_DISABLED 0x0
|
|
||||||
#define MPU6050_EXT_SYNC_TEMP_OUT_L 0x1
|
|
||||||
#define MPU6050_EXT_SYNC_GYRO_XOUT_L 0x2
|
|
||||||
#define MPU6050_EXT_SYNC_GYRO_YOUT_L 0x3
|
|
||||||
#define MPU6050_EXT_SYNC_GYRO_ZOUT_L 0x4
|
|
||||||
#define MPU6050_EXT_SYNC_ACCEL_XOUT_L 0x5
|
|
||||||
#define MPU6050_EXT_SYNC_ACCEL_YOUT_L 0x6
|
|
||||||
#define MPU6050_EXT_SYNC_ACCEL_ZOUT_L 0x7
|
|
||||||
|
|
||||||
#define MPU6050_DLPF_BW_256 0x00
|
|
||||||
#define MPU6050_DLPF_BW_188 0x01
|
|
||||||
#define MPU6050_DLPF_BW_98 0x02
|
|
||||||
#define MPU6050_DLPF_BW_42 0x03
|
|
||||||
#define MPU6050_DLPF_BW_20 0x04
|
|
||||||
#define MPU6050_DLPF_BW_10 0x05
|
|
||||||
#define MPU6050_DLPF_BW_5 0x06
|
|
||||||
|
|
||||||
#define MPU6050_GCONFIG_FS_SEL_BIT 4
|
|
||||||
#define MPU6050_GCONFIG_FS_SEL_LENGTH 2
|
|
||||||
|
|
||||||
#define MPU6050_GYRO_FS_250 0x00
|
|
||||||
#define MPU6050_GYRO_FS_500 0x01
|
|
||||||
#define MPU6050_GYRO_FS_1000 0x02
|
|
||||||
#define MPU6050_GYRO_FS_2000 0x03
|
|
||||||
|
|
||||||
#define MPU6050_ACONFIG_XA_ST_BIT 7
|
|
||||||
#define MPU6050_ACONFIG_YA_ST_BIT 6
|
|
||||||
#define MPU6050_ACONFIG_ZA_ST_BIT 5
|
|
||||||
#define MPU6050_ACONFIG_AFS_SEL_BIT 4
|
|
||||||
#define MPU6050_ACONFIG_AFS_SEL_LENGTH 2
|
|
||||||
#define MPU6050_ACONFIG_ACCEL_HPF_BIT 2
|
|
||||||
#define MPU6050_ACONFIG_ACCEL_HPF_LENGTH 3
|
|
||||||
|
|
||||||
#define MPU6050_ACCEL_FS_2 0x00
|
|
||||||
#define MPU6050_ACCEL_FS_4 0x01
|
|
||||||
#define MPU6050_ACCEL_FS_8 0x02
|
|
||||||
#define MPU6050_ACCEL_FS_16 0x03
|
|
||||||
|
|
||||||
#define MPU6050_DHPF_RESET 0x00
|
|
||||||
#define MPU6050_DHPF_5 0x01
|
|
||||||
#define MPU6050_DHPF_2P5 0x02
|
|
||||||
#define MPU6050_DHPF_1P25 0x03
|
|
||||||
#define MPU6050_DHPF_0P63 0x04
|
|
||||||
#define MPU6050_DHPF_HOLD 0x07
|
|
||||||
|
|
||||||
#define MPU6050_TEMP_FIFO_EN_BIT 7
|
|
||||||
#define MPU6050_XG_FIFO_EN_BIT 6
|
|
||||||
#define MPU6050_YG_FIFO_EN_BIT 5
|
|
||||||
#define MPU6050_ZG_FIFO_EN_BIT 4
|
|
||||||
#define MPU6050_ACCEL_FIFO_EN_BIT 3
|
|
||||||
#define MPU6050_SLV2_FIFO_EN_BIT 2
|
|
||||||
#define MPU6050_SLV1_FIFO_EN_BIT 1
|
|
||||||
#define MPU6050_SLV0_FIFO_EN_BIT 0
|
|
||||||
|
|
||||||
#define MPU6050_MULT_MST_EN_BIT 7
|
|
||||||
#define MPU6050_WAIT_FOR_ES_BIT 6
|
|
||||||
#define MPU6050_SLV_3_FIFO_EN_BIT 5
|
|
||||||
#define MPU6050_I2C_MST_P_NSR_BIT 4
|
|
||||||
#define MPU6050_I2C_MST_CLK_BIT 3
|
|
||||||
#define MPU6050_I2C_MST_CLK_LENGTH 4
|
|
||||||
|
|
||||||
#define MPU6050_CLOCK_DIV_348 0x0
|
|
||||||
#define MPU6050_CLOCK_DIV_333 0x1
|
|
||||||
#define MPU6050_CLOCK_DIV_320 0x2
|
|
||||||
#define MPU6050_CLOCK_DIV_308 0x3
|
|
||||||
#define MPU6050_CLOCK_DIV_296 0x4
|
|
||||||
#define MPU6050_CLOCK_DIV_286 0x5
|
|
||||||
#define MPU6050_CLOCK_DIV_276 0x6
|
|
||||||
#define MPU6050_CLOCK_DIV_267 0x7
|
|
||||||
#define MPU6050_CLOCK_DIV_258 0x8
|
|
||||||
#define MPU6050_CLOCK_DIV_500 0x9
|
|
||||||
#define MPU6050_CLOCK_DIV_471 0xA
|
|
||||||
#define MPU6050_CLOCK_DIV_444 0xB
|
|
||||||
#define MPU6050_CLOCK_DIV_421 0xC
|
|
||||||
#define MPU6050_CLOCK_DIV_400 0xD
|
|
||||||
#define MPU6050_CLOCK_DIV_381 0xE
|
|
||||||
#define MPU6050_CLOCK_DIV_364 0xF
|
|
||||||
|
|
||||||
#define MPU6050_I2C_SLV_RW_BIT 7
|
|
||||||
#define MPU6050_I2C_SLV_ADDR_BIT 6
|
|
||||||
#define MPU6050_I2C_SLV_ADDR_LENGTH 7
|
|
||||||
#define MPU6050_I2C_SLV_EN_BIT 7
|
|
||||||
#define MPU6050_I2C_SLV_BYTE_SW_BIT 6
|
|
||||||
#define MPU6050_I2C_SLV_REG_DIS_BIT 5
|
|
||||||
#define MPU6050_I2C_SLV_GRP_BIT 4
|
|
||||||
#define MPU6050_I2C_SLV_LEN_BIT 3
|
|
||||||
#define MPU6050_I2C_SLV_LEN_LENGTH 4
|
|
||||||
|
|
||||||
#define MPU6050_I2C_SLV4_RW_BIT 7
|
|
||||||
#define MPU6050_I2C_SLV4_ADDR_BIT 6
|
|
||||||
#define MPU6050_I2C_SLV4_ADDR_LENGTH 7
|
|
||||||
#define MPU6050_I2C_SLV4_EN_BIT 7
|
|
||||||
#define MPU6050_I2C_SLV4_INT_EN_BIT 6
|
|
||||||
#define MPU6050_I2C_SLV4_REG_DIS_BIT 5
|
|
||||||
#define MPU6050_I2C_SLV4_MST_DLY_BIT 4
|
|
||||||
#define MPU6050_I2C_SLV4_MST_DLY_LENGTH 5
|
|
||||||
|
|
||||||
#define MPU6050_MST_PASS_THROUGH_BIT 7
|
|
||||||
#define MPU6050_MST_I2C_SLV4_DONE_BIT 6
|
|
||||||
#define MPU6050_MST_I2C_LOST_ARB_BIT 5
|
|
||||||
#define MPU6050_MST_I2C_SLV4_NACK_BIT 4
|
|
||||||
#define MPU6050_MST_I2C_SLV3_NACK_BIT 3
|
|
||||||
#define MPU6050_MST_I2C_SLV2_NACK_BIT 2
|
|
||||||
#define MPU6050_MST_I2C_SLV1_NACK_BIT 1
|
|
||||||
#define MPU6050_MST_I2C_SLV0_NACK_BIT 0
|
|
||||||
|
|
||||||
#define MPU6050_INTCFG_INT_LEVEL_BIT 7
|
|
||||||
#define MPU6050_INTCFG_INT_OPEN_BIT 6
|
|
||||||
#define MPU6050_INTCFG_LATCH_INT_EN_BIT 5
|
|
||||||
#define MPU6050_INTCFG_INT_RD_CLEAR_BIT 4
|
|
||||||
#define MPU6050_INTCFG_FSYNC_INT_LEVEL_BIT 3
|
|
||||||
#define MPU6050_INTCFG_FSYNC_INT_EN_BIT 2
|
|
||||||
#define MPU6050_INTCFG_I2C_BYPASS_EN_BIT 1
|
|
||||||
#define MPU6050_INTCFG_CLKOUT_EN_BIT 0
|
|
||||||
|
|
||||||
#define MPU6050_INTMODE_ACTIVEHIGH 0x00
|
|
||||||
#define MPU6050_INTMODE_ACTIVELOW 0x01
|
|
||||||
|
|
||||||
#define MPU6050_INTDRV_PUSHPULL 0x00
|
|
||||||
#define MPU6050_INTDRV_OPENDRAIN 0x01
|
|
||||||
|
|
||||||
#define MPU6050_INTLATCH_50USPULSE 0x00
|
|
||||||
#define MPU6050_INTLATCH_WAITCLEAR 0x01
|
|
||||||
|
|
||||||
#define MPU6050_INTCLEAR_STATUSREAD 0x00
|
|
||||||
#define MPU6050_INTCLEAR_ANYREAD 0x01
|
|
||||||
|
|
||||||
#define MPU6050_INTERRUPT_FF_BIT 7
|
|
||||||
#define MPU6050_INTERRUPT_MOT_BIT 6
|
|
||||||
#define MPU6050_INTERRUPT_ZMOT_BIT 5
|
|
||||||
#define MPU6050_INTERRUPT_FIFO_OFLOW_BIT 4
|
|
||||||
#define MPU6050_INTERRUPT_I2C_MST_INT_BIT 3
|
|
||||||
#define MPU6050_INTERRUPT_PLL_RDY_INT_BIT 2
|
|
||||||
#define MPU6050_INTERRUPT_DMP_INT_BIT 1
|
|
||||||
#define MPU6050_INTERRUPT_DATA_RDY_BIT 0
|
|
||||||
|
|
||||||
// TODO: figure out what these actually do
|
|
||||||
// UMPL source code is not very obivous
|
|
||||||
#define MPU6050_DMPINT_5_BIT 5
|
|
||||||
#define MPU6050_DMPINT_4_BIT 4
|
|
||||||
#define MPU6050_DMPINT_3_BIT 3
|
|
||||||
#define MPU6050_DMPINT_2_BIT 2
|
|
||||||
#define MPU6050_DMPINT_1_BIT 1
|
|
||||||
#define MPU6050_DMPINT_0_BIT 0
|
|
||||||
|
|
||||||
#define MPU6050_MOTION_MOT_XNEG_BIT 7
|
|
||||||
#define MPU6050_MOTION_MOT_XPOS_BIT 6
|
|
||||||
#define MPU6050_MOTION_MOT_YNEG_BIT 5
|
|
||||||
#define MPU6050_MOTION_MOT_YPOS_BIT 4
|
|
||||||
#define MPU6050_MOTION_MOT_ZNEG_BIT 3
|
|
||||||
#define MPU6050_MOTION_MOT_ZPOS_BIT 2
|
|
||||||
#define MPU6050_MOTION_MOT_ZRMOT_BIT 0
|
|
||||||
|
|
||||||
#define MPU6050_DELAYCTRL_DELAY_ES_SHADOW_BIT 7
|
|
||||||
#define MPU6050_DELAYCTRL_I2C_SLV4_DLY_EN_BIT 4
|
|
||||||
#define MPU6050_DELAYCTRL_I2C_SLV3_DLY_EN_BIT 3
|
|
||||||
#define MPU6050_DELAYCTRL_I2C_SLV2_DLY_EN_BIT 2
|
|
||||||
#define MPU6050_DELAYCTRL_I2C_SLV1_DLY_EN_BIT 1
|
|
||||||
#define MPU6050_DELAYCTRL_I2C_SLV0_DLY_EN_BIT 0
|
|
||||||
|
|
||||||
#define MPU6050_PATHRESET_GYRO_RESET_BIT 2
|
|
||||||
#define MPU6050_PATHRESET_ACCEL_RESET_BIT 1
|
|
||||||
#define MPU6050_PATHRESET_TEMP_RESET_BIT 0
|
|
||||||
|
|
||||||
#define MPU6050_DETECT_ACCEL_ON_DELAY_BIT 5
|
|
||||||
#define MPU6050_DETECT_ACCEL_ON_DELAY_LENGTH 2
|
|
||||||
#define MPU6050_DETECT_FF_COUNT_BIT 3
|
|
||||||
#define MPU6050_DETECT_FF_COUNT_LENGTH 2
|
|
||||||
#define MPU6050_DETECT_MOT_COUNT_BIT 1
|
|
||||||
#define MPU6050_DETECT_MOT_COUNT_LENGTH 2
|
|
||||||
|
|
||||||
#define MPU6050_DETECT_DECREMENT_RESET 0x0
|
|
||||||
#define MPU6050_DETECT_DECREMENT_1 0x1
|
|
||||||
#define MPU6050_DETECT_DECREMENT_2 0x2
|
|
||||||
#define MPU6050_DETECT_DECREMENT_4 0x3
|
|
||||||
|
|
||||||
#define MPU6050_USERCTRL_DMP_EN_BIT 7
|
|
||||||
#define MPU6050_USERCTRL_FIFO_EN_BIT 6
|
|
||||||
#define MPU6050_USERCTRL_I2C_MST_EN_BIT 5
|
|
||||||
#define MPU6050_USERCTRL_I2C_IF_DIS_BIT 4
|
|
||||||
#define MPU6050_USERCTRL_DMP_RESET_BIT 3
|
|
||||||
#define MPU6050_USERCTRL_FIFO_RESET_BIT 2
|
|
||||||
#define MPU6050_USERCTRL_I2C_MST_RESET_BIT 1
|
|
||||||
#define MPU6050_USERCTRL_SIG_COND_RESET_BIT 0
|
|
||||||
|
|
||||||
#define MPU6050_PWR1_DEVICE_RESET_BIT 7
|
|
||||||
#define MPU6050_PWR1_SLEEP_BIT 6
|
|
||||||
#define MPU6050_PWR1_CYCLE_BIT 5
|
|
||||||
#define MPU6050_PWR1_TEMP_DIS_BIT 3
|
|
||||||
#define MPU6050_PWR1_CLKSEL_BIT 2
|
|
||||||
#define MPU6050_PWR1_CLKSEL_LENGTH 3
|
|
||||||
|
|
||||||
#define MPU6050_CLOCK_INTERNAL 0x00
|
|
||||||
#define MPU6050_CLOCK_PLL_XGYRO 0x01
|
|
||||||
#define MPU6050_CLOCK_PLL_YGYRO 0x02
|
|
||||||
#define MPU6050_CLOCK_PLL_ZGYRO 0x03
|
|
||||||
#define MPU6050_CLOCK_PLL_EXT32K 0x04
|
|
||||||
#define MPU6050_CLOCK_PLL_EXT19M 0x05
|
|
||||||
#define MPU6050_CLOCK_KEEP_RESET 0x07
|
|
||||||
|
|
||||||
#define MPU6050_PWR2_LP_WAKE_CTRL_BIT 7
|
|
||||||
#define MPU6050_PWR2_LP_WAKE_CTRL_LENGTH 2
|
|
||||||
#define MPU6050_PWR2_STBY_XA_BIT 5
|
|
||||||
#define MPU6050_PWR2_STBY_YA_BIT 4
|
|
||||||
#define MPU6050_PWR2_STBY_ZA_BIT 3
|
|
||||||
#define MPU6050_PWR2_STBY_XG_BIT 2
|
|
||||||
#define MPU6050_PWR2_STBY_YG_BIT 1
|
|
||||||
#define MPU6050_PWR2_STBY_ZG_BIT 0
|
|
||||||
|
|
||||||
#define MPU6050_WAKE_FREQ_1P25 0x0
|
|
||||||
#define MPU6050_WAKE_FREQ_2P5 0x1
|
|
||||||
#define MPU6050_WAKE_FREQ_5 0x2
|
|
||||||
#define MPU6050_WAKE_FREQ_10 0x3
|
|
||||||
|
|
||||||
#define MPU6050_BANKSEL_PRFTCH_EN_BIT 6
|
|
||||||
#define MPU6050_BANKSEL_CFG_USER_BANK_BIT 5
|
|
||||||
#define MPU6050_BANKSEL_MEM_SEL_BIT 4
|
|
||||||
#define MPU6050_BANKSEL_MEM_SEL_LENGTH 5
|
|
||||||
|
|
||||||
#define MPU6050_WHO_AM_I_BIT 6
|
|
||||||
#define MPU6050_WHO_AM_I_LENGTH 6
|
|
||||||
|
|
||||||
#define MPU6050_DMP_MEMORY_BANKS 8
|
|
||||||
#define MPU6050_DMP_MEMORY_BANK_SIZE 256
|
|
||||||
#define MPU6050_DMP_MEMORY_CHUNK_SIZE 16
|
|
||||||
|
|
||||||
// note: DMP code memory blocks defined at end of header file
|
|
||||||
|
|
||||||
class MPU6050 {
|
|
||||||
public:
|
|
||||||
MPU6050();
|
|
||||||
MPU6050(uint8_t address);
|
|
||||||
|
|
||||||
void initialize();
|
|
||||||
bool testConnection();
|
|
||||||
|
|
||||||
// AUX_VDDIO register
|
|
||||||
uint8_t getAuxVDDIOLevel();
|
|
||||||
void setAuxVDDIOLevel(uint8_t level);
|
|
||||||
|
|
||||||
// SMPLRT_DIV register
|
|
||||||
uint8_t getRate();
|
|
||||||
void setRate(uint8_t rate);
|
|
||||||
|
|
||||||
// CONFIG register
|
|
||||||
uint8_t getExternalFrameSync();
|
|
||||||
void setExternalFrameSync(uint8_t sync);
|
|
||||||
uint8_t getDLPFMode();
|
|
||||||
void setDLPFMode(uint8_t bandwidth);
|
|
||||||
|
|
||||||
// GYRO_CONFIG register
|
|
||||||
uint8_t getFullScaleGyroRange();
|
|
||||||
void setFullScaleGyroRange(uint8_t range);
|
|
||||||
|
|
||||||
// ACCEL_CONFIG register
|
|
||||||
bool getAccelXSelfTest();
|
|
||||||
void setAccelXSelfTest(bool enabled);
|
|
||||||
bool getAccelYSelfTest();
|
|
||||||
void setAccelYSelfTest(bool enabled);
|
|
||||||
bool getAccelZSelfTest();
|
|
||||||
void setAccelZSelfTest(bool enabled);
|
|
||||||
uint8_t getFullScaleAccelRange();
|
|
||||||
void setFullScaleAccelRange(uint8_t range);
|
|
||||||
uint8_t getDHPFMode();
|
|
||||||
void setDHPFMode(uint8_t mode);
|
|
||||||
|
|
||||||
// FF_THR register
|
|
||||||
uint8_t getFreefallDetectionThreshold();
|
|
||||||
void setFreefallDetectionThreshold(uint8_t threshold);
|
|
||||||
|
|
||||||
// FF_DUR register
|
|
||||||
uint8_t getFreefallDetectionDuration();
|
|
||||||
void setFreefallDetectionDuration(uint8_t duration);
|
|
||||||
|
|
||||||
// MOT_THR register
|
|
||||||
uint8_t getMotionDetectionThreshold();
|
|
||||||
void setMotionDetectionThreshold(uint8_t threshold);
|
|
||||||
|
|
||||||
// MOT_DUR register
|
|
||||||
uint8_t getMotionDetectionDuration();
|
|
||||||
void setMotionDetectionDuration(uint8_t duration);
|
|
||||||
|
|
||||||
// ZRMOT_THR register
|
|
||||||
uint8_t getZeroMotionDetectionThreshold();
|
|
||||||
void setZeroMotionDetectionThreshold(uint8_t threshold);
|
|
||||||
|
|
||||||
// ZRMOT_DUR register
|
|
||||||
uint8_t getZeroMotionDetectionDuration();
|
|
||||||
void setZeroMotionDetectionDuration(uint8_t duration);
|
|
||||||
|
|
||||||
// FIFO_EN register
|
|
||||||
bool getTempFIFOEnabled();
|
|
||||||
void setTempFIFOEnabled(bool enabled);
|
|
||||||
bool getXGyroFIFOEnabled();
|
|
||||||
void setXGyroFIFOEnabled(bool enabled);
|
|
||||||
bool getYGyroFIFOEnabled();
|
|
||||||
void setYGyroFIFOEnabled(bool enabled);
|
|
||||||
bool getZGyroFIFOEnabled();
|
|
||||||
void setZGyroFIFOEnabled(bool enabled);
|
|
||||||
bool getAccelFIFOEnabled();
|
|
||||||
void setAccelFIFOEnabled(bool enabled);
|
|
||||||
bool getSlave2FIFOEnabled();
|
|
||||||
void setSlave2FIFOEnabled(bool enabled);
|
|
||||||
bool getSlave1FIFOEnabled();
|
|
||||||
void setSlave1FIFOEnabled(bool enabled);
|
|
||||||
bool getSlave0FIFOEnabled();
|
|
||||||
void setSlave0FIFOEnabled(bool enabled);
|
|
||||||
|
|
||||||
// I2C_MST_CTRL register
|
|
||||||
bool getMultiMasterEnabled();
|
|
||||||
void setMultiMasterEnabled(bool enabled);
|
|
||||||
bool getWaitForExternalSensorEnabled();
|
|
||||||
void setWaitForExternalSensorEnabled(bool enabled);
|
|
||||||
bool getSlave3FIFOEnabled();
|
|
||||||
void setSlave3FIFOEnabled(bool enabled);
|
|
||||||
bool getSlaveReadWriteTransitionEnabled();
|
|
||||||
void setSlaveReadWriteTransitionEnabled(bool enabled);
|
|
||||||
uint8_t getMasterClockSpeed();
|
|
||||||
void setMasterClockSpeed(uint8_t speed);
|
|
||||||
|
|
||||||
// I2C_SLV* registers (Slave 0-3)
|
|
||||||
uint8_t getSlaveAddress(uint8_t num);
|
|
||||||
void setSlaveAddress(uint8_t num, uint8_t address);
|
|
||||||
uint8_t getSlaveRegister(uint8_t num);
|
|
||||||
void setSlaveRegister(uint8_t num, uint8_t reg);
|
|
||||||
bool getSlaveEnabled(uint8_t num);
|
|
||||||
void setSlaveEnabled(uint8_t num, bool enabled);
|
|
||||||
bool getSlaveWordByteSwap(uint8_t num);
|
|
||||||
void setSlaveWordByteSwap(uint8_t num, bool enabled);
|
|
||||||
bool getSlaveWriteMode(uint8_t num);
|
|
||||||
void setSlaveWriteMode(uint8_t num, bool mode);
|
|
||||||
bool getSlaveWordGroupOffset(uint8_t num);
|
|
||||||
void setSlaveWordGroupOffset(uint8_t num, bool enabled);
|
|
||||||
uint8_t getSlaveDataLength(uint8_t num);
|
|
||||||
void setSlaveDataLength(uint8_t num, uint8_t length);
|
|
||||||
|
|
||||||
// I2C_SLV* registers (Slave 4)
|
|
||||||
uint8_t getSlave4Address();
|
|
||||||
void setSlave4Address(uint8_t address);
|
|
||||||
uint8_t getSlave4Register();
|
|
||||||
void setSlave4Register(uint8_t reg);
|
|
||||||
void setSlave4OutputByte(uint8_t data);
|
|
||||||
bool getSlave4Enabled();
|
|
||||||
void setSlave4Enabled(bool enabled);
|
|
||||||
bool getSlave4InterruptEnabled();
|
|
||||||
void setSlave4InterruptEnabled(bool enabled);
|
|
||||||
bool getSlave4WriteMode();
|
|
||||||
void setSlave4WriteMode(bool mode);
|
|
||||||
uint8_t getSlave4MasterDelay();
|
|
||||||
void setSlave4MasterDelay(uint8_t delay);
|
|
||||||
uint8_t getSlate4InputByte();
|
|
||||||
|
|
||||||
// I2C_MST_STATUS register
|
|
||||||
bool getPassthroughStatus();
|
|
||||||
bool getSlave4IsDone();
|
|
||||||
bool getLostArbitration();
|
|
||||||
bool getSlave4Nack();
|
|
||||||
bool getSlave3Nack();
|
|
||||||
bool getSlave2Nack();
|
|
||||||
bool getSlave1Nack();
|
|
||||||
bool getSlave0Nack();
|
|
||||||
|
|
||||||
// INT_PIN_CFG register
|
|
||||||
bool getInterruptMode();
|
|
||||||
void setInterruptMode(bool mode);
|
|
||||||
bool getInterruptDrive();
|
|
||||||
void setInterruptDrive(bool drive);
|
|
||||||
bool getInterruptLatch();
|
|
||||||
void setInterruptLatch(bool latch);
|
|
||||||
bool getInterruptLatchClear();
|
|
||||||
void setInterruptLatchClear(bool clear);
|
|
||||||
bool getFSyncInterruptLevel();
|
|
||||||
void setFSyncInterruptLevel(bool level);
|
|
||||||
bool getFSyncInterruptEnabled();
|
|
||||||
void setFSyncInterruptEnabled(bool enabled);
|
|
||||||
bool getI2CBypassEnabled();
|
|
||||||
void setI2CBypassEnabled(bool enabled);
|
|
||||||
bool getClockOutputEnabled();
|
|
||||||
void setClockOutputEnabled(bool enabled);
|
|
||||||
|
|
||||||
// INT_ENABLE register
|
|
||||||
uint8_t getIntEnabled();
|
|
||||||
void setIntEnabled(uint8_t enabled);
|
|
||||||
bool getIntFreefallEnabled();
|
|
||||||
void setIntFreefallEnabled(bool enabled);
|
|
||||||
bool getIntMotionEnabled();
|
|
||||||
void setIntMotionEnabled(bool enabled);
|
|
||||||
bool getIntZeroMotionEnabled();
|
|
||||||
void setIntZeroMotionEnabled(bool enabled);
|
|
||||||
bool getIntFIFOBufferOverflowEnabled();
|
|
||||||
void setIntFIFOBufferOverflowEnabled(bool enabled);
|
|
||||||
bool getIntI2CMasterEnabled();
|
|
||||||
void setIntI2CMasterEnabled(bool enabled);
|
|
||||||
bool getIntDataReadyEnabled();
|
|
||||||
void setIntDataReadyEnabled(bool enabled);
|
|
||||||
|
|
||||||
// INT_STATUS register
|
|
||||||
uint8_t getIntStatus();
|
|
||||||
bool getIntFreefallStatus();
|
|
||||||
bool getIntMotionStatus();
|
|
||||||
bool getIntZeroMotionStatus();
|
|
||||||
bool getIntFIFOBufferOverflowStatus();
|
|
||||||
bool getIntI2CMasterStatus();
|
|
||||||
bool getIntDataReadyStatus();
|
|
||||||
|
|
||||||
// ACCEL_*OUT_* registers
|
|
||||||
void getMotion9(int16_t* ax, int16_t* ay, int16_t* az, int16_t* gx, int16_t* gy, int16_t* gz, int16_t* mx, int16_t* my,
|
|
||||||
int16_t* mz);
|
|
||||||
void getMotion6(int16_t* ax, int16_t* ay, int16_t* az, int16_t* gx, int16_t* gy, int16_t* gz);
|
|
||||||
void getAcceleration(int16_t* x, int16_t* y, int16_t* z);
|
|
||||||
int16_t getAccelerationX();
|
|
||||||
int16_t getAccelerationY();
|
|
||||||
int16_t getAccelerationZ();
|
|
||||||
|
|
||||||
// TEMP_OUT_* registers
|
|
||||||
int16_t getTemperature();
|
|
||||||
|
|
||||||
// GYRO_*OUT_* registers
|
|
||||||
void getRotation(int16_t* x, int16_t* y, int16_t* z);
|
|
||||||
int16_t getRotationX();
|
|
||||||
int16_t getRotationY();
|
|
||||||
int16_t getRotationZ();
|
|
||||||
|
|
||||||
// EXT_SENS_DATA_* registers
|
|
||||||
uint8_t getExternalSensorByte(int position);
|
|
||||||
uint16_t getExternalSensorWord(int position);
|
|
||||||
uint32_t getExternalSensorDWord(int position);
|
|
||||||
|
|
||||||
// MOT_DETECT_STATUS register
|
|
||||||
bool getXNegMotionDetected();
|
|
||||||
bool getXPosMotionDetected();
|
|
||||||
bool getYNegMotionDetected();
|
|
||||||
bool getYPosMotionDetected();
|
|
||||||
bool getZNegMotionDetected();
|
|
||||||
bool getZPosMotionDetected();
|
|
||||||
bool getZeroMotionDetected();
|
|
||||||
|
|
||||||
// I2C_SLV*_DO register
|
|
||||||
void setSlaveOutputByte(uint8_t num, uint8_t data);
|
|
||||||
|
|
||||||
// I2C_MST_DELAY_CTRL register
|
|
||||||
bool getExternalShadowDelayEnabled();
|
|
||||||
void setExternalShadowDelayEnabled(bool enabled);
|
|
||||||
bool getSlaveDelayEnabled(uint8_t num);
|
|
||||||
void setSlaveDelayEnabled(uint8_t num, bool enabled);
|
|
||||||
|
|
||||||
// SIGNAL_PATH_RESET register
|
|
||||||
void resetGyroscopePath();
|
|
||||||
void resetAccelerometerPath();
|
|
||||||
void resetTemperaturePath();
|
|
||||||
|
|
||||||
// MOT_DETECT_CTRL register
|
|
||||||
uint8_t getAccelerometerPowerOnDelay();
|
|
||||||
void setAccelerometerPowerOnDelay(uint8_t delay);
|
|
||||||
uint8_t getFreefallDetectionCounterDecrement();
|
|
||||||
void setFreefallDetectionCounterDecrement(uint8_t decrement);
|
|
||||||
uint8_t getMotionDetectionCounterDecrement();
|
|
||||||
void setMotionDetectionCounterDecrement(uint8_t decrement);
|
|
||||||
|
|
||||||
// USER_CTRL register
|
|
||||||
bool getFIFOEnabled();
|
|
||||||
void setFIFOEnabled(bool enabled);
|
|
||||||
bool getI2CMasterModeEnabled();
|
|
||||||
void setI2CMasterModeEnabled(bool enabled);
|
|
||||||
void switchSPIEnabled(bool enabled);
|
|
||||||
void resetFIFO();
|
|
||||||
void resetI2CMaster();
|
|
||||||
void resetSensors();
|
|
||||||
|
|
||||||
// PWR_MGMT_1 register
|
|
||||||
void reset();
|
|
||||||
bool getSleepEnabled();
|
|
||||||
void setSleepEnabled(bool enabled);
|
|
||||||
bool getWakeCycleEnabled();
|
|
||||||
void setWakeCycleEnabled(bool enabled);
|
|
||||||
bool getTempSensorEnabled();
|
|
||||||
void setTempSensorEnabled(bool enabled);
|
|
||||||
uint8_t getClockSource();
|
|
||||||
void setClockSource(uint8_t source);
|
|
||||||
|
|
||||||
// PWR_MGMT_2 register
|
|
||||||
uint8_t getWakeFrequency();
|
|
||||||
void setWakeFrequency(uint8_t frequency);
|
|
||||||
bool getStandbyXAccelEnabled();
|
|
||||||
void setStandbyXAccelEnabled(bool enabled);
|
|
||||||
bool getStandbyYAccelEnabled();
|
|
||||||
void setStandbyYAccelEnabled(bool enabled);
|
|
||||||
bool getStandbyZAccelEnabled();
|
|
||||||
void setStandbyZAccelEnabled(bool enabled);
|
|
||||||
bool getStandbyXGyroEnabled();
|
|
||||||
void setStandbyXGyroEnabled(bool enabled);
|
|
||||||
bool getStandbyYGyroEnabled();
|
|
||||||
void setStandbyYGyroEnabled(bool enabled);
|
|
||||||
bool getStandbyZGyroEnabled();
|
|
||||||
void setStandbyZGyroEnabled(bool enabled);
|
|
||||||
|
|
||||||
// FIFO_COUNT_* registers
|
|
||||||
uint16_t getFIFOCount();
|
|
||||||
|
|
||||||
// FIFO_R_W register
|
|
||||||
uint8_t getFIFOByte();
|
|
||||||
void setFIFOByte(uint8_t data);
|
|
||||||
void getFIFOBytes(uint8_t* data, uint8_t length);
|
|
||||||
|
|
||||||
// WHO_AM_I register
|
|
||||||
uint8_t getDeviceID();
|
|
||||||
void setDeviceID(uint8_t id);
|
|
||||||
|
|
||||||
// ======== UNDOCUMENTED/DMP REGISTERS/METHODS ========
|
|
||||||
|
|
||||||
// XG_OFFS_TC register
|
|
||||||
uint8_t getOTPBankValid();
|
|
||||||
void setOTPBankValid(bool enabled);
|
|
||||||
int8_t getXGyroOffset();
|
|
||||||
void setXGyroOffset(int8_t offset);
|
|
||||||
|
|
||||||
// YG_OFFS_TC register
|
|
||||||
int8_t getYGyroOffset();
|
|
||||||
void setYGyroOffset(int8_t offset);
|
|
||||||
|
|
||||||
// ZG_OFFS_TC register
|
|
||||||
int8_t getZGyroOffset();
|
|
||||||
void setZGyroOffset(int8_t offset);
|
|
||||||
|
|
||||||
// X_FINE_GAIN register
|
|
||||||
int8_t getXFineGain();
|
|
||||||
void setXFineGain(int8_t gain);
|
|
||||||
|
|
||||||
// Y_FINE_GAIN register
|
|
||||||
int8_t getYFineGain();
|
|
||||||
void setYFineGain(int8_t gain);
|
|
||||||
|
|
||||||
// Z_FINE_GAIN register
|
|
||||||
int8_t getZFineGain();
|
|
||||||
void setZFineGain(int8_t gain);
|
|
||||||
|
|
||||||
// XA_OFFS_* registers
|
|
||||||
int16_t getXAccelOffset();
|
|
||||||
void setXAccelOffset(int16_t offset);
|
|
||||||
|
|
||||||
// YA_OFFS_* register
|
|
||||||
int16_t getYAccelOffset();
|
|
||||||
void setYAccelOffset(int16_t offset);
|
|
||||||
|
|
||||||
// ZA_OFFS_* register
|
|
||||||
int16_t getZAccelOffset();
|
|
||||||
void setZAccelOffset(int16_t offset);
|
|
||||||
|
|
||||||
// XG_OFFS_USR* registers
|
|
||||||
int16_t getXGyroOffsetUser();
|
|
||||||
void setXGyroOffsetUser(int16_t offset);
|
|
||||||
|
|
||||||
// YG_OFFS_USR* register
|
|
||||||
int16_t getYGyroOffsetUser();
|
|
||||||
void setYGyroOffsetUser(int16_t offset);
|
|
||||||
|
|
||||||
// ZG_OFFS_USR* register
|
|
||||||
int16_t getZGyroOffsetUser();
|
|
||||||
void setZGyroOffsetUser(int16_t offset);
|
|
||||||
|
|
||||||
// INT_ENABLE register (DMP functions)
|
|
||||||
bool getIntPLLReadyEnabled();
|
|
||||||
void setIntPLLReadyEnabled(bool enabled);
|
|
||||||
bool getIntDMPEnabled();
|
|
||||||
void setIntDMPEnabled(bool enabled);
|
|
||||||
|
|
||||||
// DMP_INT_STATUS
|
|
||||||
bool getDMPInt5Status();
|
|
||||||
bool getDMPInt4Status();
|
|
||||||
bool getDMPInt3Status();
|
|
||||||
bool getDMPInt2Status();
|
|
||||||
bool getDMPInt1Status();
|
|
||||||
bool getDMPInt0Status();
|
|
||||||
|
|
||||||
// INT_STATUS register (DMP functions)
|
|
||||||
bool getIntPLLReadyStatus();
|
|
||||||
bool getIntDMPStatus();
|
|
||||||
|
|
||||||
// USER_CTRL register (DMP functions)
|
|
||||||
bool getDMPEnabled();
|
|
||||||
void setDMPEnabled(bool enabled);
|
|
||||||
void resetDMP();
|
|
||||||
|
|
||||||
// BANK_SEL register
|
|
||||||
void setMemoryBank(uint8_t bank, bool prefetchEnabled = false, bool userBank = false);
|
|
||||||
|
|
||||||
// MEM_START_ADDR register
|
|
||||||
void setMemoryStartAddress(uint8_t address);
|
|
||||||
|
|
||||||
// MEM_R_W register
|
|
||||||
uint8_t readMemoryByte();
|
|
||||||
void writeMemoryByte(uint8_t data);
|
|
||||||
void readMemoryBlock(uint8_t* data, uint16_t dataSize, uint8_t bank = 0, uint8_t address = 0);
|
|
||||||
bool writeMemoryBlock(const uint8_t* data, uint16_t dataSize, uint8_t bank = 0, uint8_t address = 0, bool verify = true,
|
|
||||||
bool useProgMem = false);
|
|
||||||
bool writeProgMemoryBlock(const uint8_t* data, uint16_t dataSize, uint8_t bank = 0, uint8_t address = 0,
|
|
||||||
bool verify = true);
|
|
||||||
|
|
||||||
bool writeDMPConfigurationSet(const uint8_t* data, uint16_t dataSize, bool useProgMem = false);
|
|
||||||
bool writeProgDMPConfigurationSet(const uint8_t* data, uint16_t dataSize);
|
|
||||||
|
|
||||||
// DMP_CFG_1 register
|
|
||||||
uint8_t getDMPConfig1();
|
|
||||||
void setDMPConfig1(uint8_t config);
|
|
||||||
|
|
||||||
// DMP_CFG_2 register
|
|
||||||
uint8_t getDMPConfig2();
|
|
||||||
void setDMPConfig2(uint8_t config);
|
|
||||||
|
|
||||||
// special methods for MotionApps 2.0 implementation
|
|
||||||
#ifdef MPU6050_INCLUDE_DMP_MOTIONAPPS20
|
|
||||||
uint8_t* dmpPacketBuffer;
|
|
||||||
uint16_t dmpPacketSize;
|
|
||||||
|
|
||||||
uint8_t dmpInitialize();
|
|
||||||
bool dmpPacketAvailable();
|
|
||||||
|
|
||||||
uint8_t dmpSetFIFORate(uint8_t fifoRate);
|
|
||||||
uint8_t dmpGetFIFORate();
|
|
||||||
uint8_t dmpGetSampleStepSizeMS();
|
|
||||||
uint8_t dmpGetSampleFrequency();
|
|
||||||
int32_t dmpDecodeTemperature(int8_t tempReg);
|
|
||||||
|
|
||||||
// Register callbacks after a packet of FIFO data is processed
|
|
||||||
//uint8_t dmpRegisterFIFORateProcess(inv_obj_func func, int16_t priority);
|
|
||||||
//uint8_t dmpUnregisterFIFORateProcess(inv_obj_func func);
|
|
||||||
uint8_t dmpRunFIFORateProcesses();
|
|
||||||
|
|
||||||
// Setup FIFO for various output
|
|
||||||
uint8_t dmpSendQuaternion(uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendGyro(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendAccel(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendLinearAccel(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendLinearAccelInWorld(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendControlData(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendSensorData(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendExternalSensorData(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendGravity(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendPacketNumber(uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendQuantizedAccel(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendEIS(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
|
|
||||||
// Get Fixed Point data from FIFO
|
|
||||||
uint8_t dmpGetAccel(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetAccel(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetAccel(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuaternion(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuaternion(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuaternion(Quaternion* q, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGet6AxisQuaternion(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGet6AxisQuaternion(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGet6AxisQuaternion(Quaternion* q, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetRelativeQuaternion(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetRelativeQuaternion(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetRelativeQuaternion(Quaternion* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyro(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyro(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyro(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpSetLinearAccelFilterCoefficient(float coef);
|
|
||||||
uint8_t dmpGetLinearAccel(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetLinearAccel(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetLinearAccel(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetLinearAccel(VectorInt16* v, VectorInt16* vRaw, VectorFloat* gravity);
|
|
||||||
uint8_t dmpGetLinearAccelInWorld(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetLinearAccelInWorld(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetLinearAccelInWorld(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetLinearAccelInWorld(VectorInt16* v, VectorInt16* vReal, Quaternion* q);
|
|
||||||
uint8_t dmpGetGyroAndAccelSensor(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyroAndAccelSensor(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyroAndAccelSensor(VectorInt16* g, VectorInt16* a, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyroSensor(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyroSensor(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyroSensor(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetControlData(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetTemperature(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGravity(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGravity(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGravity(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGravity(VectorFloat* v, Quaternion* q);
|
|
||||||
uint8_t dmpGetUnquantizedAccel(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetUnquantizedAccel(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetUnquantizedAccel(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuantizedAccel(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuantizedAccel(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuantizedAccel(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetExternalSensorData(int32_t* data, uint16_t size, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetEIS(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
|
|
||||||
uint8_t dmpGetEuler(float* data, Quaternion* q);
|
|
||||||
uint8_t dmpGetYawPitchRoll(float* data, Quaternion* q, VectorFloat* gravity);
|
|
||||||
|
|
||||||
// Get Floating Point data from FIFO
|
|
||||||
uint8_t dmpGetAccelFloat(float* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuaternionFloat(float* data, const uint8_t* packet = 0);
|
|
||||||
|
|
||||||
uint8_t dmpProcessFIFOPacket(const unsigned char* dmpData);
|
|
||||||
uint8_t dmpReadAndProcessFIFOPacket(uint8_t numPackets, uint8_t* processed = NULL);
|
|
||||||
|
|
||||||
uint8_t dmpSetFIFOProcessedCallback(void (*func)(void));
|
|
||||||
|
|
||||||
uint8_t dmpInitFIFOParam();
|
|
||||||
uint8_t dmpCloseFIFO();
|
|
||||||
uint8_t dmpSetGyroDataSource(uint8_t source);
|
|
||||||
uint8_t dmpDecodeQuantizedAccel();
|
|
||||||
uint32_t dmpGetGyroSumOfSquare();
|
|
||||||
uint32_t dmpGetAccelSumOfSquare();
|
|
||||||
void dmpOverrideQuaternion(long* q);
|
|
||||||
uint16_t dmpGetFIFOPacketSize();
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// special methods for MotionApps 4.1 implementation
|
|
||||||
#ifdef MPU6050_INCLUDE_DMP_MOTIONAPPS41
|
|
||||||
uint8_t* dmpPacketBuffer;
|
|
||||||
uint16_t dmpPacketSize;
|
|
||||||
|
|
||||||
uint8_t dmpInitialize();
|
|
||||||
bool dmpPacketAvailable();
|
|
||||||
|
|
||||||
uint8_t dmpSetFIFORate(uint8_t fifoRate);
|
|
||||||
uint8_t dmpGetFIFORate();
|
|
||||||
uint8_t dmpGetSampleStepSizeMS();
|
|
||||||
uint8_t dmpGetSampleFrequency();
|
|
||||||
int32_t dmpDecodeTemperature(int8_t tempReg);
|
|
||||||
|
|
||||||
// Register callbacks after a packet of FIFO data is processed
|
|
||||||
//uint8_t dmpRegisterFIFORateProcess(inv_obj_func func, int16_t priority);
|
|
||||||
//uint8_t dmpUnregisterFIFORateProcess(inv_obj_func func);
|
|
||||||
uint8_t dmpRunFIFORateProcesses();
|
|
||||||
|
|
||||||
// Setup FIFO for various output
|
|
||||||
uint8_t dmpSendQuaternion(uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendGyro(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendAccel(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendLinearAccel(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendLinearAccelInWorld(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendControlData(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendSensorData(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendExternalSensorData(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendGravity(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendPacketNumber(uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendQuantizedAccel(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
uint8_t dmpSendEIS(uint_fast16_t elements, uint_fast16_t accuracy);
|
|
||||||
|
|
||||||
// Get Fixed Point data from FIFO
|
|
||||||
uint8_t dmpGetAccel(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetAccel(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetAccel(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuaternion(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuaternion(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuaternion(Quaternion* q, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGet6AxisQuaternion(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGet6AxisQuaternion(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGet6AxisQuaternion(Quaternion* q, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetRelativeQuaternion(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetRelativeQuaternion(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetRelativeQuaternion(Quaternion* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyro(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyro(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyro(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetMag(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpSetLinearAccelFilterCoefficient(float coef);
|
|
||||||
uint8_t dmpGetLinearAccel(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetLinearAccel(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetLinearAccel(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetLinearAccel(VectorInt16* v, VectorInt16* vRaw, VectorFloat* gravity);
|
|
||||||
uint8_t dmpGetLinearAccelInWorld(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetLinearAccelInWorld(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetLinearAccelInWorld(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetLinearAccelInWorld(VectorInt16* v, VectorInt16* vReal, Quaternion* q);
|
|
||||||
uint8_t dmpGetGyroAndAccelSensor(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyroAndAccelSensor(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyroAndAccelSensor(VectorInt16* g, VectorInt16* a, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyroSensor(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyroSensor(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGyroSensor(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetControlData(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetTemperature(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGravity(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGravity(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGravity(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetGravity(VectorFloat* v, Quaternion* q);
|
|
||||||
uint8_t dmpGetUnquantizedAccel(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetUnquantizedAccel(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetUnquantizedAccel(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuantizedAccel(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuantizedAccel(int16_t* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuantizedAccel(VectorInt16* v, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetExternalSensorData(int32_t* data, uint16_t size, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetEIS(int32_t* data, const uint8_t* packet = 0);
|
|
||||||
|
|
||||||
uint8_t dmpGetEuler(float* data, Quaternion* q);
|
|
||||||
uint8_t dmpGetYawPitchRoll(float* data, Quaternion* q, VectorFloat* gravity);
|
|
||||||
|
|
||||||
// Get Floating Point data from FIFO
|
|
||||||
uint8_t dmpGetAccelFloat(float* data, const uint8_t* packet = 0);
|
|
||||||
uint8_t dmpGetQuaternionFloat(float* data, const uint8_t* packet = 0);
|
|
||||||
|
|
||||||
uint8_t dmpProcessFIFOPacket(const unsigned char* dmpData);
|
|
||||||
uint8_t dmpReadAndProcessFIFOPacket(uint8_t numPackets, uint8_t* processed = NULL);
|
|
||||||
|
|
||||||
uint8_t dmpSetFIFOProcessedCallback(void (*func)(void));
|
|
||||||
|
|
||||||
uint8_t dmpInitFIFOParam();
|
|
||||||
uint8_t dmpCloseFIFO();
|
|
||||||
uint8_t dmpSetGyroDataSource(uint8_t source);
|
|
||||||
uint8_t dmpDecodeQuantizedAccel();
|
|
||||||
uint32_t dmpGetGyroSumOfSquare();
|
|
||||||
uint32_t dmpGetAccelSumOfSquare();
|
|
||||||
void dmpOverrideQuaternion(long* q);
|
|
||||||
uint16_t dmpGetFIFOPacketSize();
|
|
||||||
#endif
|
|
||||||
|
|
||||||
private:
|
|
||||||
uint8_t devAddr;
|
|
||||||
uint8_t buffer[14];
|
|
||||||
};
|
|
||||||
|
|
||||||
#endif /* _MPU6050_H_ */
|
|
||||||
Binary file not shown.
@ -1,151 +0,0 @@
|
|||||||
import bge # Bibliothèque Blender Game Engine (BGE)
|
|
||||||
import serial # Liaison série
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# 4-labyrinthe.py
|
|
||||||
# @title: Module (unique) de la scène 3D du labyrinthe à bille pilotable avec une centrale inertielle (capteur IMU)
|
|
||||||
# @project: Blender-EduTech - Tutoriel 4 : Labyrinthe à bille - Interfacer avec une carte Arduino par la liaision série
|
|
||||||
# @lang: fr
|
|
||||||
# @authors: Philippe Roy <philippe.roy@ac-grenoble.fr>
|
|
||||||
# @copyright: Copyright (C) 2023 Philippe Roy
|
|
||||||
# @license: GNU GPL
|
|
||||||
#
|
|
||||||
# Commandes déclenchées par UPBGE pour le scène du labyrinthe
|
|
||||||
#
|
|
||||||
###############################################################################
|
|
||||||
|
|
||||||
# Récupérer la scène 3D
|
|
||||||
scene = bge.logic.getCurrentScene()
|
|
||||||
# print("Objets de la scene : ", scene.objects) # Lister les objets de la scène
|
|
||||||
|
|
||||||
# Constantes
|
|
||||||
JUST_ACTIVATED = bge.logic.KX_INPUT_JUST_ACTIVATED
|
|
||||||
JUST_RELEASED = bge.logic.KX_INPUT_JUST_RELEASED
|
|
||||||
ACTIVATE = bge.logic.KX_INPUT_ACTIVE
|
|
||||||
|
|
||||||
# Communication avec la carte Arduino
|
|
||||||
# serial_baud=115200
|
|
||||||
# # serial_comm = serial.Serial('COM4',serial_baud, timeout=0.016) # Windows
|
|
||||||
# serial_comm = serial.Serial('/dev/ttyACM0',serial_baud, timeout=0.016) # GNU/Linux
|
|
||||||
# print (serial_comm)
|
|
||||||
|
|
||||||
# Détection de la carte avec la liaison série
|
|
||||||
serial_comm = labyrinthe_carte.init_serial()
|
|
||||||
if serial_comm is None:
|
|
||||||
bge.logic.endGame()
|
|
||||||
print("Communication Carte Arduino établie")
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Gestion de la centrale inertielle (capteur IMU (inertial measurement unit))
|
|
||||||
###############################################################################
|
|
||||||
|
|
||||||
# Lecture du capteur IMU
|
|
||||||
def capteur(cont):
|
|
||||||
obj = cont.owner # obj est l'objet associé au contrôleur donc 'Plateau'
|
|
||||||
obj_bille = scene.objects['Bille']
|
|
||||||
echelle = 0.2 # Facteur d'échelle entre la capteur et la 3D
|
|
||||||
ecart=0.001 # Écart maxi sur la rotation
|
|
||||||
|
|
||||||
# Touche ESC -> Quitter
|
|
||||||
keyboard = bge.logic.keyboard
|
|
||||||
if keyboard.inputs[bge.events.ESCKEY].status[0] == ACTIVATE:
|
|
||||||
serial_comm.close()
|
|
||||||
bge.logic.endGame()
|
|
||||||
|
|
||||||
# Lecture de la liaison série : programme Arduino : 4-labyrinthe-imu.ino
|
|
||||||
serial_msg_in = str(serial_comm.readline())
|
|
||||||
|
|
||||||
# Roulis/Roll(x) et Tangage/Pitch(y)
|
|
||||||
if serial_msg_in.find(",")>0:
|
|
||||||
txt = serial_msg_in.split(',',2)
|
|
||||||
x_txt = txt[0][2:]
|
|
||||||
y_txt = txt[1][:-5]
|
|
||||||
if x_txt != " NAN" and y_txt != " NAN": # NAN : Not A Number
|
|
||||||
x=-(float(x_txt)/57.3) * echelle # 1/ 360 / (2 * pi)
|
|
||||||
y=-(float(y_txt)/57.3) * echelle # 1/ 360 / (2 * pi)
|
|
||||||
while abs(x-obj.worldOrientation.to_euler().x) > ecart :
|
|
||||||
obj.applyRotation((x-obj.worldOrientation.to_euler().x, 0, -obj.worldOrientation.to_euler().z), False)
|
|
||||||
while abs(y-obj.worldOrientation.to_euler().y) > ecart :
|
|
||||||
obj.applyRotation((0, y-obj.worldOrientation.to_euler().y, -obj.worldOrientation.to_euler().z), False)
|
|
||||||
|
|
||||||
###############################################################################
|
|
||||||
# Gameplay
|
|
||||||
###############################################################################
|
|
||||||
|
|
||||||
# Initialisation de la scène
|
|
||||||
def init(cont):
|
|
||||||
obj = cont.owner # obj est l'objet associé au contrôleur donc 'Bille'
|
|
||||||
|
|
||||||
# Mémorisation de la position de départ de la bille
|
|
||||||
obj['init_x']=obj.worldPosition.x
|
|
||||||
obj['init_y']=obj.worldPosition.y
|
|
||||||
obj['init_z']=obj.worldPosition.z
|
|
||||||
|
|
||||||
# Cacher le panneau de la victoire et suspendre la physique du panneau cliquable
|
|
||||||
scene.objects['Panneau victoire'].setVisible(False,True)
|
|
||||||
scene.objects['Panneau victoire - plan'].suspendPhysics (True)
|
|
||||||
scene.objects['Bouton fermer'].color = (0, 0, 0, 1) # Noir
|
|
||||||
|
|
||||||
# Cycle (boucle de contrôle de la bille)
|
|
||||||
def cycle(cont):
|
|
||||||
obj = cont.owner # obj est l'objet associé au contrôleur donc 'Bille'
|
|
||||||
obj['z']=obj.worldPosition.z # la propriété z est mis à jour avec la position globale en z de la bille
|
|
||||||
|
|
||||||
# Si l'altitude de bille < -10 et pas de victoire -> chute
|
|
||||||
if obj['z'] < -10 and obj['victoire'] == False:
|
|
||||||
print ("Chuuuu.....te")
|
|
||||||
depart()
|
|
||||||
|
|
||||||
# Départ de la bille
|
|
||||||
def depart():
|
|
||||||
obj_bille = scene.objects['Bille']
|
|
||||||
obj_plateau = scene.objects['Plateau']
|
|
||||||
|
|
||||||
# Replacement du plateau (tous les angles à 0 en plusieurs fois)
|
|
||||||
while obj_plateau.worldOrientation.to_euler().x != 0 and obj_plateau.worldOrientation.to_euler().y !=0 and obj_plateau.worldOrientation.to_euler().z !=0 :
|
|
||||||
obj_plateau.applyRotation((-obj_plateau.worldOrientation.to_euler().x, -obj_plateau.worldOrientation.to_euler().y, -obj_plateau.worldOrientation.to_euler().z), False)
|
|
||||||
|
|
||||||
# Mettre la bille à la position de départ avec une vitesse nulle
|
|
||||||
obj_bille = scene.objects['Bille']
|
|
||||||
obj_bille.worldLinearVelocity=(0, 0, 0)
|
|
||||||
obj_bille.worldAngularVelocity=(0, 0, 0)
|
|
||||||
obj_bille.worldPosition.x = obj_bille['init_x']
|
|
||||||
obj_bille.worldPosition.y = obj_bille['init_y']
|
|
||||||
obj_bille.worldPosition.z = obj_bille['init_z']+0.5 # On repose la bille
|
|
||||||
obj_bille['victoire']=False
|
|
||||||
obj_bille['chute'] = False
|
|
||||||
|
|
||||||
# Victoire (colision de la bille avec l'arrivée)
|
|
||||||
def victoire(cont):
|
|
||||||
scene.objects['Bille']['victoire']=True
|
|
||||||
scene.objects['Panneau victoire'].setVisible(True,True) # Afficher le panneau de la victoire
|
|
||||||
scene.objects['Panneau victoire - plan'].restorePhysics() # Restaurer la physique du panneau cliquable
|
|
||||||
start = 1
|
|
||||||
end = 100
|
|
||||||
layer = 0
|
|
||||||
priority = 1
|
|
||||||
blendin = 1.0
|
|
||||||
mode = bge.logic.KX_ACTION_MODE_PLAY
|
|
||||||
layerWeight = 0.0
|
|
||||||
ipoFlags = 0
|
|
||||||
speed = 1
|
|
||||||
scene.objects['Panneau victoire'].playAction('Panneau victoireAction', start, end, layer, priority, blendin, mode, layerWeight, ipoFlags, speed)
|
|
||||||
|
|
||||||
# Highlight du bouton Fermer
|
|
||||||
def victoire_fermer_hl(cont):
|
|
||||||
obj = cont.owner
|
|
||||||
|
|
||||||
# Activation
|
|
||||||
if cont.sensors['MO'].status == JUST_ACTIVATED:
|
|
||||||
obj.color = (1, 1, 1, 1) # Blanc
|
|
||||||
|
|
||||||
# Désactivation
|
|
||||||
if cont.sensors['MO'].status == JUST_RELEASED:
|
|
||||||
obj.color = (0, 0, 0, 1) # Noir
|
|
||||||
|
|
||||||
# Fermer le panneau de la victoire (clic)
|
|
||||||
def victoire_fermer(cont):
|
|
||||||
if cont.sensors['Click'].status == JUST_ACTIVATED and cont.sensors['MO'].positive:
|
|
||||||
scene.objects['Panneau victoire'].setVisible(False,True) # Cacher le panneau de la victoire
|
|
||||||
scene.objects['Panneau victoire - plan'].suspendPhysics (True) # Suspendre la physique du panneau cliquable
|
|
||||||
depart()
|
|
||||||
Loading…
Reference in New Issue
Block a user