# bip default config file. # Thou shoult change thy password # Listening IP address. This is the IP address bip will listen for incoming # client connections. ip = "0.0.0.0"; # To connect a client to bip, try the port below, and # be sure to set the password to the value # specified in the network you want to connect to. # Port is 6667 by default. port = 7778; # If you set this to true, you'll only be able to connect to bip # with a SSL capable IRC client. Be sure to generate a certificate # for bip using scripts/bipgenconfig. client_side_ssl = false; # This is the file containing the SSL cert/key pair bip'll use to # serve SSL clients. If unset, it defaults to /bip.pem #client_side_ssl_pem = "/path/to/pemfile"; # Define where the pidfile should be stored. Defaults to /bip.pid #pid_file="/var/run/bip/bip.pid"; # Uncomment this line to disable logging and backlogging. #log = false # Define bip's log level : # 0 : only fatal errors # 1 : add others errors # 2 : add warnings # 3 : add info messages # 4 : add debug messages log_level = 3; # This is where logs go. Channel and private messages will use that # configuration value as a prefix, and then log_format to determine # full log filename. #log_root = "/var/proxy/logs"; # Uncomment this line to disable bip's internal messages logging. # This is not recommended, a better option is to reduce log_level. #log_system = false; # Log format allows you to make log filenames depend on the log line's # attributes. Here's a list : # %u -> user name # %n -> network name # %Y -> 4 digit year # %m -> 2 digit month # %d -> 2 digit day # %c -> destination (#chan, privates, ...) #log_format = "%u/%n/%Y-%m/%c.%d.log"; # Sets the frequency (in seconds) of log syncing (real write to kernel) #log_sync_interval = 5; # Network definition, a name and server info network { name = "iiens"; server { host = "irc.iiens.net"; port = 6667; }; }; network { name = "oftc"; server { host = "irc.oftc.net"; port = 6667; }; #server { host = "other.oftc.server"; port = 6667; }; }; # SSL network sample. SSL is per-network option, not per-server ! network { name = "oftcs"; ssl = true; server { host = "ircs.oftc.net"; port = 9999; }; }; # Configuration example with one user who connects to two irc networks # To use the multi-server feature: # - define the connections # - chose and setup a different login for each connection # on your irc client: # - Use the multi server feature of your client, the server being each time # the server where bip is running. In your client setup server password to: # username:password:connectionname # - do not store the password in clear here, use the bipmkpw util to generate # a hash # User structure is grouping information for a given user user { # The name in bip of the user # This is used by bip only name = "bip4ever"; # this user's password (md5(md5("tata"))) with seed - generated by # bipmkpw password = "3880f2b39b3b9cb507b052b695d2680859bfc327"; # Set this to true if you want "bip4ever" to have admin privileges on # bip He'll be able to RELOAD bip and see all users' configuration # (except pass) admin = true; # When bip_use_notice is true, bip will send internal messages like # disconnection notifications or /BIP commands replies as notices # instead of private messages. The default is false. #bip_use_notice = true; # SSL certificates checking mode for user: # - "none" to accept anything; # - "basic" to accept if the certificate is contained in the store; # In "basic" mode, encountered untrusted certificates can be added to # the store interactively by connecting a client and "trusting" them. # - "ca" to do a complete certificate chain checking with the objects # in the store below (you have to put in it every cert, CRL, up to the # root CA). You have to build your store manually, so you may prefer # using "basic" unless you're a crypto zealot... ssl_check_mode = "none"; # Location of the user's store for SSL certificate check # In "basic" mode, that must point to a single file with all trusted # certs concatenated together (the interactive "trust" appends to this # file). # In "ca" mode, it's a directory of a standard openssl store; you must # put PEM objects (certificates, CRLs...) with .pem extension and run # `c_rehash .' in it ssl_check_store = "/home/bip4ever/.bip/trustedcerts.txt"; # Some networks (OFTC at least) allow you to authenticate to nickserv # using client side certificates, see # http://www.oftc.net/oftc/NickServ/CertFP # This is where you put your user's certificate. # ssl_client_certfile = "/home/bip4ever/.bip/bip4ever_client_auth.pem"; # These will be the default for each connections default_nick = "bip4ever"; default_user = "bip4ever"; default_realname = "bip4ever"; # Makes bip send the log of each channel and privates while # you were not connected to the proxy upon connection. #backlog = true; # enable backlog backlog_lines = 10; # number of lines in backlog, 0 means # no limit backlog_always = true; # backlog even lines already backlogged # = do not reset backlog when no client # attached anymore #backlog_no_timestamp = false; # Disables time stamps if you find them # ugly. # If blreset_on_talk talking on an irc network has the same effect of # issuing /bip blreset , meaning that stuffed logged # before the command won't be read back on backlog #backlog_reset_on_talk = false; # # If you have backlog_reset_on_talk set to true, talking in a query # will reset the backlog for the query. Same goes for channel. With the # following option set to true, talking in a connection will reset the # whole connection. The backlog for the current network is reset. #backlog_reset_connection = true; # If bl_msg_only is true, only channel and private messages will be # backlogged upon the reconnection of a client. Default is false, thus # joins, parts, quits, nick changes, topic changes, ... are backlogged #backlog_msg_only = false; # A user can have mutiple connections to irc networks. # define a connection: connection { name = "iiens"; # used by bip only network = "iiens"; # which ircnet to connect to # You can define ssl_check_mode here, if you want a different # behavior than the one defined in the parent user {}. #ssl_check_mode = "none"; # If you have multiple IP addresses, you can set the one you # want bip to use here. See manpage for more information. #vhost = "192.168.10.6"; # When source_port is defined, bip will connect to the IRC # server from this port number. That means the IRC server will # see the socket coming from :source_port. #source_port = "4567"; # these will be sent to the real server #nick = "othernick"; #user = "otheruser"; #realname = "otheruser"; #password = "serverpassword"; # Some options: #away_nick = "bip`away"; # Away message to be set when no client is connected #no_client_away_msg = "Having life, knock again later"; #follow_nick = true; #ignore_first_nick = true; # Autojoined channels: channel { name = "#bip"; }; # Password protected channel channel { name = "#elite_UnDeRgR0uNd"; key = "sikiour"; }; channel { name = "#huge(28)_activity"; # disable backlogging of this channel. backlog = false; }; }; # another connection (optional) connection { name = "oftc"; # used by bip only network = "oftc"; # which ircnet to connect to # Some options: #away_nick = "bip`away"; #follow_nick = true; #ignore_first_nick = true; #on_connect_send = "PRIVMSG NickServ :IDENTIFY nspassword"; # Autojoined channels: channel { name = "#bip"; }; }; };