diff --git a/Guests/RTR-02.ps1 b/Guests/RTR-02.ps1
index fd48d0c..3603a3e 100644
--- a/Guests/RTR-02.ps1
+++ b/Guests/RTR-02.ps1
@@ -8,87 +8,95 @@ echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"
 
 ### Change VM name
 
-echo "Changing computer Name"
+echo "Changing computer Name as RTR-02"
 Rename-computer RTR-02
+echo "Done!"
+
 #End
 
 ### Rename Adapters by parsing the VM device name
+
+echo "Rename adapters"
 $adapts = Get-NetAdapter
 foreach ($adapt in $adapts) {
 $HVName = (Get-NetAdapterAdvancedProperty -name $adapt.name -DisplayName "Hyper-v Network Adapter Name").DisplayValue
 Rename-Netadapter -name $adapt.name -NewName $HVName
 }
+echo "Done!"
+
 # End
 
 ### Pausing to let things settle
 
 echo "Sleeping 10s"
 Sleep 10
+echo "Done!"
+
 #End
 
-### Général IP configure
-
-echo "IP configuration"
-$MaskBits = 24 # This means subnet mask = 255.255.255.0
-$IPType = "IPv4"
-
 #Bou-LAN IP conf
 
+echo "IP conf via netsh fort Bou-LAN"
 netsh interface ip set address name="Bou-LAN" static 192.168.128.254 255.255.255.0
+echo "Done!"
 
 #WAN
 
+echo "IP conf via netsh for WAN"
 netsh interface ip set address name="WAN" static 192.168.255.128 255.255.255.0 192.168.255.254
+echo "Done!"
 
 # END
 
 ### DNS Conf for all InterfaceAlias
-echo "Configuring Dns"
+
+echo "Configuring Dns for 9.9.9.9 on all interfaces"
 foreach ($c in Get-NetAdapter) { write-host 'Setting DNS for' $c.interfaceName ; Set-DnsClientServerAddress -InterfaceIndex $c.interfaceindex -ServerAddresses ('9.9.9.9') }
+echo "Done!"
+
 #End
 
 ### Install VPN (?)
 
-echo "installing VPN routing role"
+echo "installing and activating routing role"
 Install-windowsFeature -Name Routing -IncludemanagementTools
 Install-remoteAccess -VpnType Routingonly
 set-service RemoteAccess -StartupType Automatic
 Start-Service RemoteAccess
+echo "Done!"
 
 #END
 
-
-
 ### Set connection as Private
 
-echo "Set connection as private"
+echo "Set connection as private on all Interface"
 Get-NetAdapter | Set-NetConnectionProfile -NetworkCategory Private
+echo "Done!"
+
 #END
 
 ### Change ZoneAlarm rule to accept incoming ICMP ipv4 probes ###
 
+echo "change firewall rules to accept ICMP probes"
 Get-NetFirewallRule -name "*ICMP4-ERQ-In*" |Enable-NetFirewallRule
+echo "Done!"
 
 #END
 
+### Activate routing and DHCP Relay
 
-### Activate NAT and DHCP Relay
+echo "Activate DHCP Relay via netsh "
 
-echo "Activate NAT and DHCP Relay"
 netsh routing ip relay install
-
 netsh routing ip add interface name="Bou-LAN" state=enable
 netsh routing ip add interface name="WAN" state=enable
 
-
 netsh routing ip relay add interface "Bou-LAN"
 netsh rout ip rel set int BOU-LAN min=0
 netsh routing ip relay add interface "WAN"
 netsh rout ip rel set int WAN min=0
 netsh routing ip relay add dhcpserver 192.168.8.1
-
-#netsh -f ./WAN.conf
-#netsh -f ./Bou-LAN.conf
+echo "Done!"
 
 ### Add routes
 
@@ -96,6 +104,7 @@ echo "Adding routes"
 route add -p 192.168.8.0/24 192.168.255.8
 route add -p 192.168.12.0/24 192.168.255.8
 route add -p 0.0.0.0/0 192.168.255.254
+echo "Done!"
 
-Read-Host "Finished???"
+Read-Host "Press enter to reboot"
 Restart-Computer