Add firewall rules for ICMP and Comments

Arc-CLI.conf

@@ -0,0 +1,13 @@
+pushd routing ip relay
+
+Install
+
+set global loglevel = ERROR
+
+add dhcpserver 192.168.8.1
+
+add interface name = "Arc-CLI"
+
+set interface name = "Arc-CLI" relaymode = enable maxhop = 6 minsecs = 6
+
+popd

Arc-SRV.conf

@@ -0,0 +1,13 @@
+pushd routing ip relay
+
+Install
+
+set global loglevel = ERROR
+
+add dhcpserver 192.168.8.1
+
+add interface name = "Arc-SRV"
+
+set interface name = "Arc-SRV" relaymode = enable maxhop = 6 minsecs = 6
+
+popd

DHCP.ps1

@@ -55,4 +55,13 @@ Add-DhcpServerv4Scope -name "Bou-LAN" -StartRange 192.168.128.1 -EndRange 192.16
 Add-DhcpServerv4ExclusionRange -ScopeID 192.168.128.0 -StartRange 192.168.128.1 -EndRange 192.168.128.63
 Add-DhcpServerv4ExclusionRange -ScopeID 192.168.128.0 -StartRange 192.168.128.240 -EndRange 192.168.128.254
 Set-DhcpServerv4OptionValue -OptionID 3 -Value 192.168.128.254
-Set-DhcpServerv4OptionValue -DnsServer 9.9.9.9
+Set-DhcpServerv4OptionValue -DnsServer 9.9.9.9
+
+# Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
+
+$Params = @{
+	"Name"   = 'vm-monitoring-icmpv4'
+	"Action"        = 'Allow'
+}
+
+Set-NetFirewallRule @Params

Routeur.ps1

@@ -1,53 +1,34 @@
+# Alexandre SIMAO
+# GPLv3
+
+# Script to install and configure a Fuckdows Server 2016 as a router
+
+# Change the poor machine name
 $name = Read-host "Nouveau nom d'hôte?"
 Rename-computer $name
-Install-WindowsFeature Routing
+
+# Install Routing and necessary linked roles
+Install-WindowsFeature RemoteAccess, RSAT-RemoteAccess-PowerShell, Routing
+Install-remoteAccess -VpnType Vpn
+
+# Display interfaces and active forwarding for all of thm via Regedit
 netsh inter show inter
 Set-ItemProperty -path 'HKLM:\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet`
 \Services\Tcpip\Parameters' -Name 'IPEnableRouter' -Value '0x00000001'
 Set-NetConnectionProfile -NetworkCategory Private
 
-# IP address or DnsHostName of your Dhcp Server
-$dhcpServer = '192.168.8.1'
+# Activate NAT and DHCP Relay
+netsh routing ip nat install
+netsh routing ip nat add interface "WAN"
+netsh routing ip nat set interface "WAN" mode = full
+netsh routing ip nat add interface "Arc-CLI"
+netsh routing ip nat add interface "Arc-SRV"
+ntsh -f ./*.conf
 
-# Name of the network adapter to enable DHCP on
-$Inter1 = Read-Host "First interface name"
-$Inter2 = Read-Host "Second interface name"
+# Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
+$Params = @{
+	"Name"   = 'vm-monitoring-icmpv4'
+	"Action"        = 'Allow'
+}
 
-$routerNetAdapterName1 = '$Inter1'
-$routerNetAdapterName1 = '$Inter2'
-
-
-$dhcpAddress = [Net.Dns]::GetHostEntry($dhcpServer)
-if(!$dhcpAddress){
-  Write-Warning "Unable to identify IP address of [$dhcpServer]"
-  break
-}else{
-  $dhcpServerIP = $dhcpAddress.AddressList[0]
-  }
-
-$netshDhcpRelay=@"
-pushd routing ip relay
-install
-set global loglevel=ERROR
-add dhcpserver $($dhcpServerIP.IPAddressToString)
-add interface name="$routerNetAdapterName1"
-set interface name="$routerNetAdapterName1" relaymode=enable maxhop=6 minsecs=6
-add interface name="$routerNetAdapterName2"
-set interface name="$routerNetAdapterName2" relaymode=enable maxhop=6 minsecs=6
-popd
-"@
-
-$netshDhcpRelayPath="$ENV:TEMP\netshDhcpRelay"
-
-# Create netsh script file
-New-Item -Path $netshDhcpRelayPath `
-  -Type File `
-  -ErrorAction SilentlyContinue | Out-Null
-
-# Populate contents of the script 
-Set-Content -Path $netshDhcpRelayPath `
-  -Value $netshDhcpRelay.Split("`r`n") `
-  -Encoding ASCII
-
-# run it
-netsh -f $netshDhcpRelayPath
+Set-NetFirewallRule @Params

WAN.conf

@@ -0,0 +1,13 @@
+pushd routing ip relay
+
+Install
+
+set global loglevel = ERROR
+
+add dhcpserver 192.168.8.1
+
+add interface name = "WAN"
+
+set interface name = "WAN" relaymode = enable maxhop = 6 minsecs = 6
+
+popd