From e34e0cbe72e06ef19aa2d56e9787e65b727ea6c2 Mon Sep 17 00:00:00 2001
From: Winston Smith <winstonasmith1984@tutanota.com>
Date: Wed, 21 Apr 2021 17:59:14 +0200
Subject: [PATCH] Full auto RTR-01, seems functionnal

---
 Guests/RTR-01.ps1       | 49 +++++++++++++++++++++++++++++++++--------
 Guests/SRV-01_DHCP.ps1  |  3 +--
 Host/Infra-Standard.ps1 |  9 ++++----
 Memo.ps1                | 14 ++++++++++++
 4 files changed, 59 insertions(+), 16 deletions(-)

diff --git a/Guests/RTR-01.ps1 b/Guests/RTR-01.ps1
index 7818eaa..55a3ef8 100644
--- a/Guests/RTR-01.ps1
+++ b/Guests/RTR-01.ps1
@@ -10,28 +10,55 @@ echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"
 
 Rename-computer RTR-01
 
-$adapter = Get-NetAdapter | ? {$_.MacAddress -eq "00-15-5D-02-70-00"}
-Rename-NetAdapter -Name "Eth*" -NewName "Arc-SRV"
+$adapts = Get-NetAdapter
+foreach ($adapt in $adapts) {
+$HVName = (Get-NetAdapterAdvancedProperty -name $adapt.name -DisplayName "Hyper-v Network Adapter Name").DisplayValue
+Rename-Netadapter -name $adapt.name -NewName $HVName
+}
+
+#Général IP configure
 
-#Arc-SRV
-$IP = "192.168.8.1"
 $MaskBits = 24 # This means subnet mask = 255.255.255.0
-$Gateway = "192.168.8.254"
-$Dns = "9.9.9.9"
 $IPType = "IPv4"
 
+#Arc-SRV IP conf
+
+$adapter = Get-NetAdapter | ? {$_.Name -eq "Arc-SRV"}
+$IP = "192.168.8.254"
+$adapter | New-NetIPAddress `
+ -AddressFamily $IPType `
+ -IPAddress $IP `
+ -PrefixLength $MaskBits
+
+ #Arc-CLI
+
+ $adapter = Get-NetAdapter | ? {$_.Name -eq "Arc-CLI"}
+ $IP = "192.168.12.254"
+ $adapter | New-NetIPAddress `
+  -AddressFamily $IPType `
+  -IPAddress $IP `
+  -PrefixLength $MaskBits `
+
+#WAN
+
+$adapter = Get-NetAdapter | ? {$_.Name -eq "WAN"}
+$IP = "192.168.255.8"
 $adapter | New-NetIPAddress `
  -AddressFamily $IPType `
  -IPAddress $IP `
  -PrefixLength $MaskBits `
- -DefaultGateway $Gateway
+ -DefaultGateway "192.168.255.254"
 
+#DNS Conf for all InterfaceAlias
+foreach ($c in Get-NetAdapter) { write-host 'Setting DNS for' $c.interfaceName ; Set-DnsClientServerAddress -InterfaceIndex $c.interfaceindex -ServerAddresses ('9.9.9.9') }
 
 
 # Install Routing and necessary linked roles
 Install-WindowsFeature RemoteAccess, RSAT-RemoteAccess-PowerShell, Routing -IncludeManagementTools
-#Install-remoteAccess -VpnType Vpn
 
+#Install VPN
+echo "Install-remoteAccess -VpnType Vpn"
+Install-remoteAccess -VpnType Vpn
 Set-NetConnectionProfile -NetworkCategory Private
 $Params = @{
 	"Name"   = 'vm-monitoring-icmpv4'
@@ -39,7 +66,9 @@ $Params = @{
 }
 
 Set-NetFirewallRule @Params
+
 # Activate NAT and DHCP Relay
+echo "Activate NAT and DHCP Relay"
 netsh routing ip relay install
 
 netsh routing ip add interface name="WAN" state=enable
@@ -72,7 +101,9 @@ Set-NetFirewallRule @Params
 # Add routes
 
 route add -p 192.168.8.0/24 192.168.8.254
-route add -p 192.168.12.0.24 192.168.12.254
+route add -p 192.168.12.0/24 192.168.12.254
 route add -p 192.168.255.0/24 192.168.255.8
 route add -p 192.168.128.8/24 192.168.255.128
 route add -p 0.0.0.0/0 192.168.255.254
+
+Read-Host "Finished???"
diff --git a/Guests/SRV-01_DHCP.ps1 b/Guests/SRV-01_DHCP.ps1
index 14f6197..7c7646f 100644
--- a/Guests/SRV-01_DHCP.ps1
+++ b/Guests/SRV-01_DHCP.ps1
@@ -12,8 +12,7 @@ Rename-computer "SRV-1"
 
 # Set IP for pre-defined MAC addresses
 
-$adapter = Get-NetAdapter | ? {$_.MacAddress -eq "00-15-5D-02-70-00"}
-Rename-NetAdapter -Name "Eth*" -NewName "Arc-SRV"
+$adapter = Get-NetAdapter | ? {$_.Name -eq "Arc-SRV"}
 
 #Arc-SRV
 $IP = "192.168.8.1"
diff --git a/Host/Infra-Standard.ps1 b/Host/Infra-Standard.ps1
index 7d1da6d..34668a0 100644
--- a/Host/Infra-Standard.ps1
+++ b/Host/Infra-Standard.ps1
@@ -42,16 +42,15 @@ $vms = @{
     Generation = '2'
     MemoryStartupBytes = 1024Mb
     VHDPath = "d:\VHD\RTR-01.vhdx"
-    SwitchName = 'Arc-SRV'
 }
 
 New-VM @vms
 Set-VMMemory RTR-01 -DynamicMemoryEnabled $true -MinimumBytes 512MB -StartupBytes 1024MB -MaximumBytes 2GB
 $vmadapter = Get-VMNetworkAdapter -VMName "RTR-01"
-Set-VMNetworkAdapter -VMNetworkAdapter $vmadapter[0] -StaticMacAddress 00155D027001
-Add-VMNetworkAdapter -VMName "RTR-01" -SwitchName "Arc-CLI"
-Add-VMNetworkAdapter -VMName "RTR-01" -SwitchName "WAN" 
-
+#Set-VMNetworkAdapter -VMNetworkAdapter $vmadapter[0] -Name "Arc-SRV" -DeviceNaming on
+Add-VMNetworkAdapter -VMName "RTR-01" -SwitchName "Arc-CLI" -Name "Arc-Cli" -DeviceNaming on
+Add-VMNetworkAdapter -VMName "RTR-01" -SwitchName "WAN" -Name "WAN" -DeviceNaming on
+Add-VMNetworkAdapter -VMName "RTR-01" -SwitchName "Arc-SRV" -Name "Arc-SRV" -DeviceNaming on
 
 # RTR-02
 
diff --git a/Memo.ps1 b/Memo.ps1
index 9839beb..396b52d 100644
--- a/Memo.ps1
+++ b/Memo.ps1
@@ -2,6 +2,20 @@
 Get-VMNetworkAdapter -VMName RTR-01|Format-Table -Property Switchname,Macaddress -HideTableHeaders |Export-Csv D:\scripts\Guests\MACS\test.csv -NoTypeInformation
 #echo $VMNETADAP | out-file -FilePath D:\scripts\Guests\MACS\temp.txt
 
+#Arc-SRV
+$IP = "192.168.8.1"
+$MaskBits = 24 # This means subnet mask = 255.255.255.0
+$Gateway = "192.168.8.254"
+$Dns = "9.9.9.9"
+$IPType = "IPv4"
+
+$adapter | New-NetIPAddress `
+ -AddressFamily $IPType `
+ -IPAddress $IP `
+ -PrefixLength $MaskBits `
+ -DefaultGateway $Gateway
+
+