# Alexandre SIMAO # GPLv3 # Script to install and configure a Fuckdows Server 2016 as a router # RTR-01 Only # Change the poor machine name Read-host "Script for RTR-01" Read-host "WARNING: Plug-in in this order Arc-SRV, Arc-CLI and WAN" echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman" Rename-computer RTR-01 Rename-NetAdapter -Name "Ethernet" -NewName "Arc-SRV" Rename-NetAdapter -Name "Ethernet 2" -NewName "Arc-CLI" Rename-NetAdapter -Name "Ethernet 3" -NewName "WAN" # Install Routing and necessary linked roles Install-WindowsFeature RemoteAccess, RSAT-RemoteAccess-PowerShell, Routing -IncludeManagementTools #Install-remoteAccess -VpnType Vpn Set-NetConnectionProfile -networkcategory private # Change IP and DNS # netsh interface ip set address "WAN" static 192.168.255.8 255.255.255.0 192.168.255.254 netsh interface ip set address "Arc-CLI" static 192.168.12.254 255.255.255.0 netsh interface ip set address "Arc-SRV" static 192.168.8.254 255.255.255.0 netsh interface ip set dns name="WAN" static 9.9.9.9 # Display interfaces and active forwarding for all of thm via Regedit netsh inter show inter Set-ItemProperty -path 'HKLM:\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet` \Services\Tcpip\Parameters' -Name 'IPEnableRouter' -Value '0x00000001' Set-NetConnectionProfile -NetworkCategory Private # Activate NAT and DHCP Relay netsh routing ip relay install netsh routing ip add interface name="WAN" state=enable netsh routing ip relay add interface "WAN" netsh rout ip rel set int ARC-CLI min=0 netsh routing ip relay add interface "Arc-CLI" netsh rout ip rel set int ARC-SRV min=0 netsh routing ip relay add interface "Arc-SRV" netsh rout ip rel set int WAN min=0 netsh routing ip relay add dhcpserver 192.168.8.1 set-service RemoteAccess -StartupType Automatic Start-Service RemoteAccess netsh -f ./Arc-CLI.conf netsh -f ./Arc-SRV.conf netsh -f ./WAN.conf # Change ZoneAlarm rule to accept incoming ICMP ipv4 probes $Params = @{ "Name" = 'vm-monitoring-icmpv4' "Action" = 'Allow' } Set-NetFirewallRule @Params # Add routes route add -p 192.168.8.0/24 192.168.8.254 route add -p 192.168.12.0.24 192.168.12.254 route add -p 192.168.255.0/24 192.168.255.8 route add -p 192.168.128.8/24 192.168.255.128 route add -p 0.0.0.0/0 192.168.255.254