# Alexandre SIMAO
# GPLv3

# Script to install and configure a Fuckdows Server 2016 as a router
# RTR-03 Only

# Change the poor machine name
$name = Read-host "Nouveau nom d'hôte?"
Rename-computer $name

# Install Routing and necessary linked roles
Install-WindowsFeature RemoteAccess, RSAT-RemoteAccess-PowerShell, Routing -IncludeManagementTools
set-service RemoteAccess -StartupType Automatic
Start-Service RemoteAccess

# Display interfaces and active forwarding for all of thm via Regedit
netsh inter show inter

Set-ItemProperty -path 'HKLM:\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet`
\Services\Tcpip\Parameters' -Name 'IPEnableRouter' -Value '0x00000001'
Set-NetConnectionProfile -NetworkCategory Private

# Activate NAT and DHCP Relay
netsh routing ip relay install

netsh routing ip add interface name="WAN" state=enable

netsh routing ip relay add interface "WAN"
netsh rout ip rel set int ARC-CLI min=0
netsh routing ip relay add interface "Bou-LAN"
netsh rout ip rel set int ARC-SRV min=0


netsh -f ./Bou-LAN.conf

# Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
$Params = @{
	"Name"   = 'vm-monitoring-icmpv4'
	"Action"        = 'Allow'
}

Set-NetFirewallRule @Params

# Add routes

route add -p 192.168.8.0/24 192.168.255.8
route add -p 192.168.12.0.24 192.168.255.8
route add -p 192.168.255.0/24 192.168.255.128
route add -p 192.168.128.0/24 192.168.128.254
route add -p 0.0.0.0/0 192.168.255.0