# Made by Alexandre SIMAO # GPLv3 # Script to install and configure a Fuckdows Server 2016 as a router # RTR-02 Only echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman" ### Change VM name echo "Changing computer Name as RTR-02" Rename-computer RTR-02 echo "Done!" #End ### Rename Adapters by parsing the VM device name echo "Rename adapters" $adapts = Get-NetAdapter foreach ($adapt in $adapts) { $HVName = (Get-NetAdapterAdvancedProperty -name $adapt.name -DisplayName "Hyper-v Network Adapter Name").DisplayValue Rename-Netadapter -name $adapt.name -NewName $HVName } echo "Done!" # End ### Pausing to let things settle echo "Sleeping 10s" Sleep 10 echo "Done!" #End #Bou-LAN IP conf echo "IP conf via netsh fort Bou-LAN" netsh interface ip set address name="Bou-LAN" static 192.168.128.254 255.255.255.0 echo "Done!" #WAN echo "IP conf via netsh for WAN" netsh interface ip set address name="WAN" static 192.168.255.128 255.255.255.0 192.168.255.254 echo "Done!" # END ### DNS Conf for all InterfaceAlias echo "Configuring Dns for 9.9.9.9 on all interfaces" foreach ($c in Get-NetAdapter) { write-host 'Setting DNS for' $c.interfaceName ; Set-DnsClientServerAddress -InterfaceIndex $c.interfaceindex -ServerAddresses ('9.9.9.9') } echo "Done!" #End ### Install VPN (?) echo "installing and activating routing role" Install-windowsFeature -Name Routing -IncludemanagementTools Install-remoteAccess -VpnType Routingonly set-service RemoteAccess -StartupType Automatic Start-Service RemoteAccess echo "Done!" #END ### Set connection as Private echo "Set connection as private on all Interface" Get-NetAdapter | Set-NetConnectionProfile -NetworkCategory Private echo "Done!" #END ### Change ZoneAlarm rule to accept incoming ICMP ipv4 probes ### echo "change firewall rules to accept ICMP probes" Get-NetFirewallRule -name "*ICMP4-ERQ-In*" |Enable-NetFirewallRule echo "Done!" #END ### Activate routing and DHCP Relay echo "Activate DHCP Relay via netsh " netsh routing ip relay install netsh routing ip add interface name="Bou-LAN" state=enable netsh routing ip add interface name="WAN" state=enable netsh routing ip relay add interface "Bou-LAN" netsh rout ip rel set int BOU-LAN min=0 netsh routing ip relay add interface "WAN" netsh rout ip rel set int WAN min=0 netsh routing ip relay add dhcpserver 192.168.8.1 echo "Done!" ### Add routes echo "Adding routes" route add -p 192.168.8.0/24 192.168.255.8 route add -p 192.168.12.0/24 192.168.255.8 route add -p 0.0.0.0/0 192.168.255.254 echo "Done!" Read-Host "Press enter to reboot" Restart-Computer