# Alexandre SIMAO
# GPLv3

# Script to install and configure a Fuckdows Server 2016 as a router
# RTR-01 Only

# Change the poor machine name
$name = Read-host "Nouveau nom d'hôte?"
Rename-computer $name

# Install Routing and necessary linked roles
Install-WindowsFeature RemoteAccess, RSAT-RemoteAccess-PowerShell, Routing
Install-remoteAccess -VpnType Vpn

# Display interfaces and active forwarding for all of thm via Regedit
netsh inter show inter
Set-ItemProperty -path 'HKLM:\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet`
\Services\Tcpip\Parameters' -Name 'IPEnableRouter' -Value '0x00000001'
Set-NetConnectionProfile -NetworkCategory Private

# Activate NAT and DHCP Relay
netsh routing ip nat install
netsh routing ip nat add interface "WAN"
netsh routing ip nat set interface "WAN" mode = full
netsh routing ip nat add interface "Arc-CLI"
netsh routing ip nat add interface "Arc-SRV"
ntsh -f ./*.conf

# Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
$Params = @{
	"Name"   = 'vm-monitoring-icmpv4'
	"Action"        = 'Allow'
}

Set-NetFirewallRule @Params

# Add routes

route add -p 192.168.8.0/24 192.168.8.254
route add -p 192.168.12.0.24 192.168.12.254
route add -p 192.168.255.0/24 192.168.255.8
route add -p 192.168.128.8/24 192.168.255.128
route add -p 0.0.0.0/0 192.168.255.0