# Made by Alexandre SIMAO
# GPLv3

# Script to install and configure a Fuckdows Server 2016 as a router
# RTR-01 Only
# Script done

# Change the poor machine name

echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"

Rename-computer RTR-01

$adapts = Get-NetAdapter
foreach ($adapt in $adapts) {
$HVName = (Get-NetAdapterAdvancedProperty -name $adapt.name -DisplayName "Hyper-v Network Adapter Name").DisplayValue
Rename-Netadapter -name $adapt.name -NewName $HVName
}

#Général IP configure

$MaskBits = 24 # This means subnet mask = 255.255.255.0
$IPType = "IPv4"

#Arc-SRV IP conf

$adapter = Get-NetAdapter | ? {$_.Name -eq "Arc-SRV"}
$IP = "192.168.8.254"
$adapter | New-NetIPAddress `
 -AddressFamily $IPType `
 -IPAddress $IP `
 -PrefixLength $MaskBits

 #Arc-CLI

 $adapter = Get-NetAdapter | ? {$_.Name -eq "Arc-CLI"}
 $IP = "192.168.12.254"
 $adapter | New-NetIPAddress `
  -AddressFamily $IPType `
  -IPAddress $IP `
  -PrefixLength $MaskBits `

#WAN

$adapter = Get-NetAdapter | ? {$_.Name -eq "WAN"}
$IP = "192.168.255.8"
$adapter | New-NetIPAddress `
 -AddressFamily $IPType `
 -IPAddress $IP `
 -PrefixLength $MaskBits `
 -DefaultGateway "192.168.255.254"

#DNS Conf for all InterfaceAlias
foreach ($c in Get-NetAdapter) { write-host 'Setting DNS for' $c.interfaceName ; Set-DnsClientServerAddress -InterfaceIndex $c.interfaceindex -ServerAddresses ('9.9.9.9') }


# Install Routing and necessary linked roles
Install-WindowsFeature RemoteAccess, RSAT-RemoteAccess-PowerShell, Routing -IncludeManagementTools

#Install VPN
echo "Install-remoteAccess -VpnType Vpn"
Install-remoteAccess -VpnType Vpn
Set-NetConnectionProfile -NetworkCategory Private
$Params = @{
	"Name"   = 'vm-monitoring-icmpv4'
	"Action"        = 'Allow'
}

Set-NetFirewallRule @Params

# Activate NAT and DHCP Relay
echo "Activate NAT and DHCP Relay"
netsh routing ip relay install

netsh routing ip add interface name="WAN" state=enable

netsh routing ip relay add interface "WAN"
netsh rout ip rel set int ARC-CLI min=0
netsh routing ip relay add interface "Arc-CLI"
netsh rout ip rel set int ARC-SRV min=0
netsh routing ip relay add interface "Arc-SRV"
netsh rout ip rel set int WAN min=0
netsh routing ip relay add dhcpserver 192.168.8.1

set-service RemoteAccess -StartupType Automatic
Start-Service RemoteAccess

netsh -f ./Arc-CLI.conf
netsh -f ./Arc-SRV.conf
netsh -f ./WAN.conf

Set-NetConnectionProfile -networkcategory private

# Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
$Params = @{
	"Name"   = 'vm-monitoring-icmpv4'
	"Action"        = 'Allow'
}

Set-NetFirewallRule @Params

# Add routes

route add -p 192.168.8.0/24 192.168.8.254
route add -p 192.168.12.0/24 192.168.12.254
route add -p 192.168.255.0/24 192.168.255.8
route add -p 192.168.128.8/24 192.168.255.128
route add -p 0.0.0.0/0 192.168.255.254

Read-Host "Finished???"