# Alexandre Simao
# GPL v3

# SRV-01 ONLY
# TODO : 	exclusion/attribution fields
#			    Rename interfaces
#

echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"

### Rename this piece of garbage

echo "Changing Computer's name"
Rename-computer "SRV-1"
# End

### Rename interfaces by parsing VM device name

echo "Renaming adapters"
$adapts = Get-NetAdapter
foreach ($adapt in $adapts) {
$HVName = (Get-NetAdapterAdvancedProperty -name $adapt.name -DisplayName "Hyper-v Network Adapter Name").DisplayValue
Rename-Netadapter -name $adapt.name -NewName $HVName
}
#End

# Pausing to let things settle

echo "Sleeping 10s"
Sleep 10

### Général IP configure
# echo "IP configuration"

#Arc-SRV

netsh interface ip set address name="Arc-SRV" static 192.168.8.1 255.255.255.0 192.168.8.254

### DNS Conf for all InterfaceAlias ###

echo "DNS Conf"
foreach ($c in Get-NetAdapter) { write-host 'Setting DNS for' $c.interfaceName ; Set-DnsClientServerAddress -InterfaceIndex $c.interfaceindex -ServerAddresses ('192.168.8.1') }

### Install the DHCP role (Management tools if you love Metrosexual UI)

echo "Installing DHCP role"
Install-WindowsFeature DHCP -IncludeManagementTools

#END

### Setting connection as Private

echo "Setting connection as Private"
Set-NetConnectionProfile -NetworkCategory Private


### Create DHCP "security" groups

echo "Creating DHCP security groups"
netsh dhcp add securitygroups

#END

### Restart the DHCP server

echo "Restarting DHCP server"
Restart-Service dhcpserver

# END

###################Template#######################
#Add-DhcpServerv4Scope -name "Corpnet" -StartRange 10.0.0.1 -EndRange 10.0.0.254 -SubnetMask 255.255.255.0 -State Active
#Add-DhcpServerv4ExclusionRange -ScopeID 10.0.0.0 -StartRange 10.0.0.1 -EndRange 10.0.0.15
#Set-DhcpServerv4OptionValue -OptionID 3 -Value 10.0.0.1 -ScopeID 10.0.0.0 -ComputerName DHCP1.corp.contoso.com
#Set-DhcpServerv4OptionValue -DnsDomain corp.contoso.com -DnsServer 10.0.0.2
##################################################

### Create DHCP Scopes For Arc-CLI Arc-SRV Bou-Lan

echo "Create DHCP Scopes For Arc-CLI Arc-SRV Bou-Lan"

Add-DhcpServerv4Scope -name "Arc-SRV" -StartRange 192.168.8.1 -EndRange 192.168.8.254 -SubnetMask 255.255.255.0 -State Active
Add-DhcpServerv4ExclusionRange -ScopeID 192.168.8.0 -StartRange 192.168.8.1 -EndRange 192.168.8.63
Add-DhcpServerv4ExclusionRange -ScopeID 192.168.8.0 -StartRange 192.168.8.240 -EndRange 192.168.8.254

Add-DhcpServerv4Scope -name "Arc-CLI" -StartRange 192.168.12.1 -EndRange 192.168.12.254 -SubnetMask 255.255.255.0 -State Active
Add-DhcpServerv4ExclusionRange -ScopeID 192.168.12.0 -StartRange 192.168.12.1 -EndRange 192.168.12.63
Add-DhcpServerv4ExclusionRange -ScopeID 192.168.12.0 -StartRange 192.168.12.240 -EndRange 192.168.12.254

Add-DhcpServerv4Scope -name "Bou-LAN" -StartRange 192.168.128.1 -EndRange 192.168.128.254 -SubnetMask 255.255.255.0 -State Active
Add-DhcpServerv4ExclusionRange -ScopeID 192.168.128.0 -StartRange 192.168.128.1 -EndRange 192.168.128.63
Add-DhcpServerv4ExclusionRange -ScopeID 192.168.128.0 -StartRange 192.168.128.240 -EndRange 192.168.128.254
#END

### Change ZoneAlarm rule to accept incoming ICMP ipv4 probes

echo "Allowing ICMPv4 probes"
$Params = @{
	"Name"   = 'vm-monitoring-icmpv4'
	"Action"        = 'Allow'
}

Set-NetFirewallRule @Params
# END

### Add routes for RTR-01

echo "Add routes for RTR-01"
route add -p 192.168.12.0/24 192.168.8.254
route add -p 192.168.255.0/24 192.168.8.254
route add -p 192.168.128.0/24 192.168.8.254
route add -p 0.0.0.0/0 192.168.8.254
# END

### Change DHCP server options

echo "Adding DHCP server options"
Set-DhcpServerv4OptionValue -ScopeId 192.168.128.0 -Router 192.168.128.254
Set-DhcpServerv4OptionValue -ScopeId 192.168.12.0 -Router 192.168.12.254
Set-DhcpServerv4OptionValue -ScopeId 192.168.8.0 -Router 192.168.8.254
Get-DhcpServerv4Scope | Set-DhcpServerv4OptionValue -DnsServer 192.168.8.1

Read-Host "Finished?"
Restart-Computer