182 lines
8.8 KiB
Markdown
182 lines
8.8 KiB
Markdown
|
# Alpine Install: from a disc to pc engine APU single only boot
|
|||
|
|
|||
|
**Overall description:** Alpine Installation from an official image tar
|
|||
|
file downloaded to a real second generation PC Engines APU systems
|
|||
|
(apu2, apu3, apu4), where it will be single OS only.
|
|||
|
|
|||
|
This document will guide you to **install Alpine into second generation
|
|||
|
PC Engines APU systems**, it was tested with an apu2d4 and Alpine 3.11.6..
|
|||
|
|
|||
|
Feels lost here? check [How to use this guide](#how-to-use-this-guide) section of this document
|
|||
|
|
|||
|
## Terminology
|
|||
|
|
|||
|
- **[UEFI](Alpine_and_UEFI.md)**: it\'s a new system included
|
|||
|
in every new hardware machine laptop or desktops, that will manage
|
|||
|
the early boot process as a little operating system, see more in the
|
|||
|
[Alpine and UEFI](Alpine_and_UEFI.md) page.
|
|||
|
- **New machine**: will be your real machine fresh and ready to
|
|||
|
install your new Alpine operating system, with an installed ISO
|
|||
|
image where to put the downloaded media installation.
|
|||
|
- **Bootable USB**: will be your hardware drive input to put the image
|
|||
|
downloaded iso media with the operating system Alpine to install as
|
|||
|
source media; this drive are commonly named
|
|||
|
[USB](https://en.wikipedia.org/wiki/USB) unit.
|
|||
|
- **Serial console:** is an input port on the device.. DB9 serial port
|
|||
|
for serial console, located at the board to use as char device, it's
|
|||
|
common in those devices.
|
|||
|
- **Source media**: will be the just burned / disc from the downloaded
|
|||
|
iso file of Alpine operating system. Will be Attach to the serial
|
|||
|
console to property boot the source disc as media installation.
|
|||
|
- **Target media**: will be the storage medium device into the new
|
|||
|
computer target where the Alpine files for operating system will be
|
|||
|
installed, its one partition from the
|
|||
|
[HardDisk](https://en.wikipedia.org/wiki/Hard_disk_drive) of the new
|
|||
|
computer.
|
|||
|
|
|||
|
## Requirements
|
|||
|
|
|||
|
- A USBstick to just burn/record/write the ISO image installer as
|
|||
|
the source media file downloaded
|
|||
|
- In the new machine we need serial device port allowed to attach
|
|||
|
- In the new machine we need at least 512Mb of RAM, but required 2Gb
|
|||
|
of RAM for desktop/graphical applications
|
|||
|
- In the new machine we need target media with at least 2G of hard
|
|||
|
disk, but required 10G for desktops
|
|||
|
- Will need to previously downloaded and write the Source media ISO
|
|||
|
file from <https://alpinelinux.org/downloads/>
|
|||
|
|
|||
|
## Preparing the source medium to install
|
|||
|
|
|||
|
Download the source medium to install and put into your home documents
|
|||
|
in a modern computer. The source medium to install in this case are
|
|||
|
**just 64-bit only**, the download URL will be as following format:
|
|||
|
`http://dl-cdn.alpinelinux.org/alpine/v<VERSION>/releases/<ARCH>/alpine-standard-<VERSION>.0-<ARCH>.iso`
|
|||
|
where `ARCH` and `VERSION` could be:
|
|||
|
|
|||
|
- `<ARCH>` could be one of:
|
|||
|
- **x86_64**: The popular AMD64 compatible 64-bit x86 based
|
|||
|
machines, i386 are not recommended for newer/lasted hardware.
|
|||
|
- `<VERSION>` could be one of:
|
|||
|
- **latest-stable** for a more up to date without taking care of
|
|||
|
numbered
|
|||
|
- **3.12** the most recommended for machines between 2016 to 2018
|
|||
|
|
|||
|
EXAMPLE if you plan **to using 3.12 version the available links to download will be:**
|
|||
|
|
|||
|
- for **x86_64** computers:
|
|||
|
`http://dl-cdn.alpinelinux.org/alpine/v3.12/releases/x86_64/alpine-standard-3.12.0-x86_64.iso`
|
|||
|
|
|||
|
**Usin Graphical download way**: Just point the web browser to that url and the
|
|||
|
download of the iso file will start. A file with **.iso** extension
|
|||
|
type, with name like `"alpine-standard-3.17.0-x86_64.iso"` (if amd64) or
|
|||
|
like `alpine-standard-3.12.1-x86.iso` (if i386); will be downloaded
|
|||
|
commonly into the Download directory of your home documents filesystem.
|
|||
|
|
|||
|
**Usin Command line method way**: in unix-like terminal execute:
|
|||
|
`wget -c -t8 --no-check-certificate http://dl-cdn.alpinelinux.org/alpine/v3.12/releases/x86_64/alpine-standard-3.12.0-x86_64.iso`,
|
|||
|
and where you run the command, in that place/dir will be downloaded the file.
|
|||
|
|
|||
|
## Booting the Alpine ISO disc
|
|||
|
|
|||
|
1. It's probably a good idea to ensure that the BIOS / Firmware is up
|
|||
|
to date.
|
|||
|
2. Create_a\_Bootable_USB thumb
|
|||
|
drive with the current standard x86_64 image from the downloads
|
|||
|
page.
|
|||
|
3. Attach to the serial console. Configure your terminal emulator for
|
|||
|
115200 8n1.
|
|||
|
4. Power on the APU.
|
|||
|
5. When BIOS prompted, hit F10 and select to boot from USB.
|
|||
|
6. At the boot prompt, **quickly** type a slash to interrupt the
|
|||
|
default boot, which has a short timeout.
|
|||
|
7. Continue entering the remainder of this command at your leisure. It
|
|||
|
should have only one slash at the start, to be clear:
|
|||
|
`/boot/vmlinuz-lts modules=loop,squashfs,sd-mod,usb-storage nomodeset console=ttyS0,115200 initrd=/boot/initramfs-lts`
|
|||
|
8. Alpine should come up as normal.
|
|||
|
|
|||
|
When the machine start, you must be sure to choose the optical drive
|
|||
|
(commonly named CD/DVD Rom drive), so the disc/iso will boot and after a
|
|||
|
while a command line shell will show you:
|
|||
|
|
|||
|
> **Note** When starting Alpine it will ask for the login, just typing root and pressing enter allows you to start:
|
|||
|
|
|||
|
![](https://venenux.github.io/alpine-espanol/instalar/instalar-desde-virtualbox-a-discoreal-dualboot-screenshot-01.png)
|
|||
|
|
|||
|
#### runing the setup script
|
|||
|
|
|||
|
After entering the root environment and gets the console prompt installation media,
|
|||
|
you must perform these commands, that will:
|
|||
|
|
|||
|
This will start some questions, these are in the following order:
|
|||
|
|
|||
|
* keyboard and variant, example for Latin is esand afteres-winkeys
|
|||
|
* hostname: just hit enter, it's the name of the computer.
|
|||
|
* Network options: select the `eth0` one that is the network cable and answer `dhcp`.
|
|||
|
* DNS Options: It is recommended to use `8.8.8.8 ` and `none` for the domain
|
|||
|
* Time zone options: Just use the suggested defaults.
|
|||
|
* Proxy Options: Use noneif you are connecting directly to the Internet.
|
|||
|
* SSH Options: Use opensshthe package that already comes in the middle.
|
|||
|
* NTP Options: Use chronythe packet already in the middle.
|
|||
|
* Mode: Select `sys` to install the system on disk.
|
|||
|
|
|||
|
## After reboot
|
|||
|
|
|||
|
1. **Before** rebooting, edit /boot/extlinux.conf.
|
|||
|
- Add `SERIAL 0 115200` as the first line in the file.
|
|||
|
- In the `APPEND` line, replace `quiet` with
|
|||
|
`console=ttyS0,115200`
|
|||
|
2. Remove the thumb drive.
|
|||
|
3. Cross your fingers and reboot. The system should boot properly with
|
|||
|
console on serial.
|
|||
|
4. Edit `/etc/update-extlinux.conf` so that if extlinux.conf is
|
|||
|
regenerated it will retain these settings:
|
|||
|
- Update the line with `serial_port` to read `serial_port=0`
|
|||
|
- Update the `serial_baud` line to read `serial_baud=115200`
|
|||
|
- Update the `default_kernel_opts` line to replace `quiet` with
|
|||
|
`console=ttyS0,115200`
|
|||
|
5. Run `update-extlinux`
|
|||
|
6. Examine `/boot/extlinux.conf`.
|
|||
|
- Make sure it looks OK. Compare with /boot/extlinux.conf-old.
|
|||
|
- If something looks wrong,
|
|||
|
`mv /boot/extlinux.conf-old /boot/extlinux.conf` to roll back
|
|||
|
the changes and try to figure out what went wrong
|
|||
|
7. Cross your fingers and reboot. The system should boot properly with
|
|||
|
console on serial.
|
|||
|
|
|||
|
## How to use this guide
|
|||
|
|
|||
|
This guide **structure all the commands in blocks, each block its separated by a line spaced**,
|
|||
|
so you must **type each line as is.. and hit enter**, so you noted that then you
|
|||
|
typed each separated clocks of commands, copy/type only blocks separated by an empty line,
|
|||
|
all new(next) lines are made by just enter. the terminal will detect if must execute or not.
|
|||
|
|
|||
|
This guide is for install process, many parts will need you understand minimal
|
|||
|
knowledge of linux.
|
|||
|
|
|||
|
This guide assumed you have a serial port allowed in the targeted computer, also
|
|||
|
its important you shuold understand the way of the configuration in this guide.
|
|||
|
|
|||
|
> **Warning** Some Linux or/and Mac terminals have security cut/paste locks, so
|
|||
|
if you paste, the first line will be preceded by garbage, check always the first char of your paste.
|
|||
|
|
|||
|
## Licensing clarifications
|
|||
|
|
|||
|
**CC BY-NC-SA**: the project allows reusers to distribute, remix, adapt, and build upon the material
|
|||
|
in any medium or format for noncommercial purposes only, and only so long as attribution is given
|
|||
|
to the creators involved. If you remix, adapt, or build upon the material, you must license the modified
|
|||
|
material under identical terms, includes the following elements:
|
|||
|
|
|||
|
* **BY** – Credit must be given to the creator of each content respectivelly, starting at the first contributor.
|
|||
|
* **NC** – Only noncommercial uses of the work are permitted, with exceptions if you fill an issue here!
|
|||
|
* **SA** – Adaptations must be shared under the same terms, you must obey this terms and do not change it.
|
|||
|
|
|||
|
https://codeberg.org/alpine/alpine-wiki/src/branch/main#license
|
|||
|
|
|||
|
## See also
|
|||
|
|
|||
|
* [README.md](README.md)
|
|||
|
* [alpine-newbie-install.md](../../newbie/alpine-newbie-install.md)
|
|||
|
* [alpine-tutorial-desktop-wayland-try.md](alpine-tutorial-desktop-wayland-try.md)
|
|||
|
* [alpine-tutorial-desktop-xfce4-fast-forward.md](alpine-tutorial-desktop-xfce4-fast-forward.md)
|