Initial import

This commit is contained in:
nohar 2005-04-28 08:26:44 +00:00
commit 665d2ec5af
70 changed files with 26772 additions and 0 deletions

6
AUTHORS Normal file
View File

@ -0,0 +1,6 @@
Arnaud 'nohar' Cornet
Loïc 'Kyoshiro' Gomez
Thanks to jj, YS and lafounie, for hanging around while we were coding.
Crypto shamelessly taken from Christophe 'sexy' Devine.

340
COPYING Normal file
View File

@ -0,0 +1,340 @@
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Library General
Public License instead of this License.

4
ChangeLog Normal file
View File

@ -0,0 +1,4 @@
2005-04-21 Arnaud Cornet <nohar@t1r.net>
* src: Now use autoconf/automake
bip is now public :)

14
IDEAS Normal file
View File

@ -0,0 +1,14 @@
- parser limité aux join part mode kick kill privmsg notices quit nick names
- parser client : join, part, quit, nick, privmsg/notice
- gestion des chans avec liste des nicks et statut
- backlog avec timestamp à la reconnexion
- logs au format irssi + timestamp complet
- parser de conf (lex) du style var = value
- backlog dans un dir, plusieurs fichiers (un par chan + le reste dans un autre)
- [secondaire] rotate logs
- connection.c: conn, read/write polls, waitevent, ssl transparent et anti flood
- irc.c: gestion des chans, des spécificités d'un client IRC (ping)
- log.c: log et backlog
- client.c: gestion des clients (auth, etc...)
- config.c: lecture et enregistrement de la conf

182
INSTALL Normal file
View File

@ -0,0 +1,182 @@
Basic Installation
==================
These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, a file
`config.cache' that saves the results of its tests to speed up
reconfiguring, and a file `config.log' containing compiler output
(useful mainly for debugging `configure').
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If at some point `config.cache'
contains results you don't want to keep, you may remove or edit it.
The file `configure.in' is used to create `configure' by a program
called `autoconf'. You only need `configure.in' if you want to change
it or regenerate `configure' using a newer version of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system. If you're
using `csh' on an old version of System V, you might need to type
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package.
4. Type `make install' to install the programs and any data files and
documentation.
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. You can give `configure'
initial values for variables by setting them in the environment. Using
a Bourne-compatible shell, you can do that on the command line like
this:
CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
Or on systems that have the `env' program, you can do it like this:
env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you must use a version of `make' that
supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
If you have to use a `make' that does not supports the `VPATH'
variable, you have to compile the package for one architecture at a time
in the source code directory. After you have installed the package for
one architecture, use `make distclean' before reconfiguring for another
architecture.
Installation Names
==================
By default, `make install' will install the package's files in
`/usr/local/bin', `/usr/local/man', etc. You can specify an
installation prefix other than `/usr/local' by giving `configure' the
option `--prefix=PATH'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
give `configure' the option `--exec-prefix=PATH', the package will use
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=PATH' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Specifying the System Type
==========================
There may be some features `configure' can not figure out
automatically, but needs to determine by the type of host the package
will run on. Usually `configure' can figure that out, but if it prints
a message saying it can not guess the host type, give it the
`--host=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
CPU-COMPANY-SYSTEM
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the host type.
If you are building compiler tools for cross-compiling, you can also
use the `--target=TYPE' option to select the type of system they will
produce code for and the `--build=TYPE' option to select the type of
system on which you are compiling the package.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Operation Controls
==================
`configure' recognizes the following options to control how it
operates.
`--cache-file=FILE'
Use and save the results of the tests in FILE instead of
`./config.cache'. Set FILE to `/dev/null' to disable caching, for
debugging `configure'.
`--help'
Print a summary of the options to `configure', and exit.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--version'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`configure' also accepts some other, not widely useful, options.

1
Makefile.am Normal file
View File

@ -0,0 +1 @@
SUBDIRS = src samples

357
Makefile.in Normal file
View File

@ -0,0 +1,357 @@
# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
CC = @CC@
HAVE_LIB = @HAVE_LIB@
LEX = @LEX@
LIB = @LIB@
LTLIB = @LTLIB@
MAKEINFO = @MAKEINFO@
PACKAGE = @PACKAGE@
VERSION = @VERSION@
YACC = @YACC@
SUBDIRS = src samples
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = ./src/config.h
CONFIG_CLEAN_FILES =
DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
Makefile.in NEWS TODO aclocal.m4 config.guess config.sub configure \
configure.in install-sh missing mkinstalldirs src/config.h.in \
src/stamp-h.in
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
GZIP_ENV = --best
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
$(ACLOCAL_M4): configure.in
cd $(srcdir) && $(ACLOCAL)
config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
src/config.h: src/stamp-h
@if test ! -f $@; then \
rm -f src/stamp-h; \
$(MAKE) src/stamp-h; \
else :; fi
src/stamp-h: $(srcdir)/src/config.h.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES= CONFIG_HEADERS=src/config.h \
$(SHELL) ./config.status
@echo timestamp > src/stamp-h 2> /dev/null
$(srcdir)/src/config.h.in: $(srcdir)/src/stamp-h.in
@if test ! -f $@; then \
rm -f $(srcdir)/src/stamp-h.in; \
$(MAKE) $(srcdir)/src/stamp-h.in; \
else :; fi
$(srcdir)/src/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOHEADER)
@echo timestamp > $(srcdir)/src/stamp-h.in 2> /dev/null
mostlyclean-hdr:
clean-hdr:
distclean-hdr:
-rm -f src/config.h
maintainer-clean-hdr:
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
@SET_MAKE@
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
test "$$subdir" != "." || dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|| (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
mostlyclean-tags:
clean-tags:
distclean-tags:
-rm -f TAGS ID
maintainer-clean-tags:
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
-rm -rf $(distdir)
GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
dc_install_base=`cd $(distdir)/=inst && pwd`; \
cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) dist
-rm -rf $(distdir)
@banner="$(distdir).tar.gz is ready for distribution"; \
dashes=`echo "$$banner" | sed s/./=/g`; \
echo "$$dashes"; \
echo "$$banner"; \
echo "$$dashes"
dist: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
dist-all: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
distdir: $(DISTFILES)
-rm -rf $(distdir)
mkdir $(distdir)
-chmod 777 $(distdir)
here=`cd $(top_builddir) && pwd`; \
top_distdir=`cd $(distdir) && pwd`; \
distdir=`cd $(distdir) && pwd`; \
cd $(top_srcdir) \
&& $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
@for file in $(DISTFILES); do \
d=$(srcdir); \
if test -d $$d/$$file; then \
cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
for subdir in $(SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am:
install-exec: install-exec-recursive
install-data-am:
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile
all-redirect: all-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
mostlyclean-generic:
clean-generic:
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic
mostlyclean: mostlyclean-recursive
clean-am: clean-hdr clean-tags clean-generic mostlyclean-am
clean: clean-recursive
distclean-am: distclean-hdr distclean-tags distclean-generic clean-am
distclean: distclean-recursive
-rm -f config.status
maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \
maintainer-clean-generic distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-recursive
-rm -f config.status
.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
install-data-recursive uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

0
NEWS Normal file
View File

2
README Normal file
View File

@ -0,0 +1,2 @@
log encryption support
salt this md5

9
TODO Normal file
View File

@ -0,0 +1,9 @@
- SSL certificate verification
- allowed IP filtering
- multi user (user/pass to identify user + realname to id. network)
- keep invites when detached
- DCC proxying ?
- /bip command, for admin (rehash, jump, ...)
- crypt logs
tidy up irc_server/server structures

987
aclocal.m4 vendored Normal file
View File

@ -0,0 +1,987 @@
dnl aclocal.m4 generated automatically by aclocal 1.4-p6
dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
dnl This file is free software; the Free Software Foundation
dnl gives unlimited permission to copy and/or distribute it,
dnl with or without modifications, as long as this notice is preserved.
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
dnl PARTICULAR PURPOSE.
# lib-prefix.m4 serial 3 (gettext-0.13)
dnl Copyright (C) 2001-2003 Free Software Foundation, Inc.
dnl This file is free software, distributed under the terms of the GNU
dnl General Public License. As a special exception to the GNU General
dnl Public License, this file may be distributed as part of a program
dnl that contains a configuration script generated by Autoconf, under
dnl the same distribution terms as the rest of that program.
dnl From Bruno Haible.
dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
dnl require excessive bracketing.
ifdef([AC_HELP_STRING],
[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
dnl to access previously installed libraries. The basic assumption is that
dnl a user will want packages to use other packages he previously installed
dnl with the same --prefix option.
dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
dnl libraries, but is otherwise very convenient.
AC_DEFUN([AC_LIB_PREFIX],
[
AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
AC_REQUIRE([AC_PROG_CC])
AC_REQUIRE([AC_CANONICAL_HOST])
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
dnl By default, look in $includedir and $libdir.
use_additional=yes
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
AC_LIB_ARG_WITH([lib-prefix],
[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
--without-lib-prefix don't search for libraries in includedir and libdir],
[
if test "X$withval" = "Xno"; then
use_additional=no
else
if test "X$withval" = "X"; then
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
else
additional_includedir="$withval/include"
additional_libdir="$withval/lib"
fi
fi
])
if test $use_additional = yes; then
dnl Potentially add $additional_includedir to $CPPFLAGS.
dnl But don't add it
dnl 1. if it's the standard /usr/include,
dnl 2. if it's already present in $CPPFLAGS,
dnl 3. if it's /usr/local/include and we are using GCC on Linux,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_includedir" != "X/usr/include"; then
haveit=
for x in $CPPFLAGS; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-I$additional_includedir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test "X$additional_includedir" = "X/usr/local/include"; then
if test -n "$GCC"; then
case $host_os in
linux*) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
if test -d "$additional_includedir"; then
dnl Really add $additional_includedir to $CPPFLAGS.
CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
fi
fi
fi
fi
dnl Potentially add $additional_libdir to $LDFLAGS.
dnl But don't add it
dnl 1. if it's the standard /usr/lib,
dnl 2. if it's already present in $LDFLAGS,
dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_libdir" != "X/usr/lib"; then
haveit=
for x in $LDFLAGS; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test "X$additional_libdir" = "X/usr/local/lib"; then
if test -n "$GCC"; then
case $host_os in
linux*) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LDFLAGS.
LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
fi
fi
fi
fi
fi
])
dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
dnl acl_final_exec_prefix, containing the values to which $prefix and
dnl $exec_prefix will expand at the end of the configure script.
AC_DEFUN([AC_LIB_PREPARE_PREFIX],
[
dnl Unfortunately, prefix and exec_prefix get only finally determined
dnl at the end of configure.
if test "X$prefix" = "XNONE"; then
acl_final_prefix="$ac_default_prefix"
else
acl_final_prefix="$prefix"
fi
if test "X$exec_prefix" = "XNONE"; then
acl_final_exec_prefix='${prefix}'
else
acl_final_exec_prefix="$exec_prefix"
fi
acl_save_prefix="$prefix"
prefix="$acl_final_prefix"
eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
prefix="$acl_save_prefix"
])
dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
dnl variables prefix and exec_prefix bound to the values they will have
dnl at the end of the configure script.
AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
[
acl_save_prefix="$prefix"
prefix="$acl_final_prefix"
acl_save_exec_prefix="$exec_prefix"
exec_prefix="$acl_final_exec_prefix"
$1
exec_prefix="$acl_save_exec_prefix"
prefix="$acl_save_prefix"
])
# lib-link.m4 serial 4 (gettext-0.12)
dnl Copyright (C) 2001-2003 Free Software Foundation, Inc.
dnl This file is free software, distributed under the terms of the GNU
dnl General Public License. As a special exception to the GNU General
dnl Public License, this file may be distributed as part of a program
dnl that contains a configuration script generated by Autoconf, under
dnl the same distribution terms as the rest of that program.
dnl From Bruno Haible.
dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
dnl augments the CPPFLAGS variable.
AC_DEFUN([AC_LIB_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
AC_REQUIRE([AC_LIB_RPATH])
define([Name],[translit([$1],[./-], [___])])
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
AC_LIB_LINKFLAGS_BODY([$1], [$2])
ac_cv_lib[]Name[]_libs="$LIB[]NAME"
ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
])
LIB[]NAME="$ac_cv_lib[]Name[]_libs"
LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
dnl results of this search when this library appears as a dependency.
HAVE_LIB[]NAME=yes
undefine([Name])
undefine([NAME])
])
dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
dnl searches for libname and the libraries corresponding to explicit and
dnl implicit dependencies, together with the specified include files and
dnl the ability to compile and link the specified testcode. If found, it
dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
[
AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
AC_REQUIRE([AC_LIB_RPATH])
define([Name],[translit([$1],[./-], [___])])
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
dnl accordingly.
AC_LIB_LINKFLAGS_BODY([$1], [$2])
dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
dnl because if the user has installed lib[]Name and not disabled its use
dnl via --without-lib[]Name-prefix, he wants to use it.
ac_save_CPPFLAGS="$CPPFLAGS"
AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
ac_save_LIBS="$LIBS"
LIBS="$LIBS $LIB[]NAME"
AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
LIBS="$ac_save_LIBS"
])
if test "$ac_cv_lib[]Name" = yes; then
HAVE_LIB[]NAME=yes
AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
AC_MSG_CHECKING([how to link with lib[]$1])
AC_MSG_RESULT([$LIB[]NAME])
else
HAVE_LIB[]NAME=no
dnl If $LIB[]NAME didn't lead to a usable library, we don't need
dnl $INC[]NAME either.
CPPFLAGS="$ac_save_CPPFLAGS"
LIB[]NAME=
LTLIB[]NAME=
fi
AC_SUBST([HAVE_LIB]NAME)
AC_SUBST([LIB]NAME)
AC_SUBST([LTLIB]NAME)
undefine([Name])
undefine([NAME])
])
dnl Determine the platform dependent parameters needed to use rpath:
dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
dnl hardcode_direct, hardcode_minus_L.
AC_DEFUN([AC_LIB_RPATH],
[
AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
. ./conftest.sh
rm -f ./conftest.sh
acl_cv_rpath=done
])
wl="$acl_cv_wl"
libext="$acl_cv_libext"
shlibext="$acl_cv_shlibext"
hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
hardcode_direct="$acl_cv_hardcode_direct"
hardcode_minus_L="$acl_cv_hardcode_minus_L"
dnl Determine whether the user wants rpath handling at all.
AC_ARG_ENABLE(rpath,
[ --disable-rpath do not hardcode runtime library paths],
:, enable_rpath=yes)
])
dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
dnl the libraries corresponding to explicit and implicit dependencies.
dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
[
define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
[ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
dnl By default, look in $includedir and $libdir.
use_additional=yes
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
AC_LIB_ARG_WITH([lib$1-prefix],
[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
--without-lib$1-prefix don't search for lib$1 in includedir and libdir],
[
if test "X$withval" = "Xno"; then
use_additional=no
else
if test "X$withval" = "X"; then
AC_LIB_WITH_FINAL_PREFIX([
eval additional_includedir=\"$includedir\"
eval additional_libdir=\"$libdir\"
])
else
additional_includedir="$withval/include"
additional_libdir="$withval/lib"
fi
fi
])
dnl Search the library and its dependencies in $additional_libdir and
dnl $LDFLAGS. Using breadth-first-seach.
LIB[]NAME=
LTLIB[]NAME=
INC[]NAME=
rpathdirs=
ltrpathdirs=
names_already_handled=
names_next_round='$1 $2'
while test -n "$names_next_round"; do
names_this_round="$names_next_round"
names_next_round=
for name in $names_this_round; do
already_handled=
for n in $names_already_handled; do
if test "$n" = "$name"; then
already_handled=yes
break
fi
done
if test -z "$already_handled"; then
names_already_handled="$names_already_handled $name"
dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
dnl or AC_LIB_HAVE_LINKFLAGS call.
uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
eval value=\"\$HAVE_LIB$uppername\"
if test -n "$value"; then
if test "$value" = yes; then
eval value=\"\$LIB$uppername\"
test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
eval value=\"\$LTLIB$uppername\"
test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
else
dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
dnl that this library doesn't exist. So just drop it.
:
fi
else
dnl Search the library lib$name in $additional_libdir and $LDFLAGS
dnl and the already constructed $LIBNAME/$LTLIBNAME.
found_dir=
found_la=
found_so=
found_a=
if test $use_additional = yes; then
if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
found_dir="$additional_libdir"
found_so="$additional_libdir/lib$name.$shlibext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
else
if test -f "$additional_libdir/lib$name.$libext"; then
found_dir="$additional_libdir"
found_a="$additional_libdir/lib$name.$libext"
if test -f "$additional_libdir/lib$name.la"; then
found_la="$additional_libdir/lib$name.la"
fi
fi
fi
fi
if test "X$found_dir" = "X"; then
for x in $LDFLAGS $LTLIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
found_dir="$dir"
found_so="$dir/lib$name.$shlibext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
else
if test -f "$dir/lib$name.$libext"; then
found_dir="$dir"
found_a="$dir/lib$name.$libext"
if test -f "$dir/lib$name.la"; then
found_la="$dir/lib$name.la"
fi
fi
fi
;;
esac
if test "X$found_dir" != "X"; then
break
fi
done
fi
if test "X$found_dir" != "X"; then
dnl Found the library.
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
if test "X$found_so" != "X"; then
dnl Linking with a shared library. We attempt to hardcode its
dnl directory into the executable's runpath, unless it's the
dnl standard /usr/lib.
if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
dnl No hardcoding is needed.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
dnl Use an explicit option to hardcode DIR into the resulting
dnl binary.
dnl Potentially add DIR to ltrpathdirs.
dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
haveit=
for x in $ltrpathdirs; do
if test "X$x" = "X$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
ltrpathdirs="$ltrpathdirs $found_dir"
fi
dnl The hardcoding into $LIBNAME is system dependent.
if test "$hardcode_direct" = yes; then
dnl Using DIR/libNAME.so during linking hardcodes DIR into the
dnl resulting binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
dnl Use an explicit option to hardcode DIR into the resulting
dnl binary.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
dnl Potentially add DIR to rpathdirs.
dnl The rpathdirs will be appended to $LIBNAME at the end.
haveit=
for x in $rpathdirs; do
if test "X$x" = "X$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
rpathdirs="$rpathdirs $found_dir"
fi
else
dnl Rely on "-L$found_dir".
dnl But don't add it if it's already contained in the LDFLAGS
dnl or the already constructed $LIBNAME
haveit=
for x in $LDFLAGS $LIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$found_dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
fi
if test "$hardcode_minus_L" != no; then
dnl FIXME: Not sure whether we should use
dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
dnl here.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
else
dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
dnl here, because this doesn't fit in flags passed to the
dnl compiler. So give up. No hardcoding. This affects only
dnl very old systems.
dnl FIXME: Not sure whether we should use
dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
dnl here.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
fi
fi
fi
fi
else
if test "X$found_a" != "X"; then
dnl Linking with a static library.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
else
dnl We shouldn't come here, but anyway it's good to have a
dnl fallback.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
fi
fi
dnl Assume the include files are nearby.
additional_includedir=
case "$found_dir" in
*/lib | */lib/)
basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
additional_includedir="$basedir/include"
;;
esac
if test "X$additional_includedir" != "X"; then
dnl Potentially add $additional_includedir to $INCNAME.
dnl But don't add it
dnl 1. if it's the standard /usr/include,
dnl 2. if it's /usr/local/include and we are using GCC on Linux,
dnl 3. if it's already present in $CPPFLAGS or the already
dnl constructed $INCNAME,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_includedir" != "X/usr/include"; then
haveit=
if test "X$additional_includedir" = "X/usr/local/include"; then
if test -n "$GCC"; then
case $host_os in
linux*) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
for x in $CPPFLAGS $INC[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-I$additional_includedir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_includedir"; then
dnl Really add $additional_includedir to $INCNAME.
INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
fi
fi
fi
fi
fi
dnl Look for dependencies.
if test -n "$found_la"; then
dnl Read the .la file. It defines the variables
dnl dlname, library_names, old_library, dependency_libs, current,
dnl age, revision, installed, dlopen, dlpreopen, libdir.
save_libdir="$libdir"
case "$found_la" in
*/* | *\\*) . "$found_la" ;;
*) . "./$found_la" ;;
esac
libdir="$save_libdir"
dnl We use only dependency_libs.
for dep in $dependency_libs; do
case "$dep" in
-L*)
additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
dnl But don't add it
dnl 1. if it's the standard /usr/lib,
dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
dnl 3. if it's already present in $LDFLAGS or the already
dnl constructed $LIBNAME,
dnl 4. if it doesn't exist as a directory.
if test "X$additional_libdir" != "X/usr/lib"; then
haveit=
if test "X$additional_libdir" = "X/usr/local/lib"; then
if test -n "$GCC"; then
case $host_os in
linux*) haveit=yes;;
esac
fi
fi
if test -z "$haveit"; then
haveit=
for x in $LDFLAGS $LIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LIBNAME.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
fi
fi
haveit=
for x in $LDFLAGS $LTLIB[]NAME; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X-L$additional_libdir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
if test -d "$additional_libdir"; then
dnl Really add $additional_libdir to $LTLIBNAME.
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
fi
fi
fi
fi
;;
-R*)
dir=`echo "X$dep" | sed -e 's/^X-R//'`
if test "$enable_rpath" != no; then
dnl Potentially add DIR to rpathdirs.
dnl The rpathdirs will be appended to $LIBNAME at the end.
haveit=
for x in $rpathdirs; do
if test "X$x" = "X$dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
rpathdirs="$rpathdirs $dir"
fi
dnl Potentially add DIR to ltrpathdirs.
dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
haveit=
for x in $ltrpathdirs; do
if test "X$x" = "X$dir"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
ltrpathdirs="$ltrpathdirs $dir"
fi
fi
;;
-l*)
dnl Handle this in the next round.
names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
;;
*.la)
dnl Handle this in the next round. Throw away the .la's
dnl directory; it is already contained in a preceding -L
dnl option.
names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
;;
*)
dnl Most likely an immediate library name.
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
;;
esac
done
fi
else
dnl Didn't find the library; assume it is in the system directories
dnl known to the linker and runtime loader. (All the system
dnl directories known to the linker should also be known to the
dnl runtime loader, otherwise the system is severely misconfigured.)
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
fi
fi
fi
done
done
if test "X$rpathdirs" != "X"; then
if test -n "$hardcode_libdir_separator"; then
dnl Weird platform: only the last -rpath option counts, the user must
dnl pass all path elements in one option. We can arrange that for a
dnl single library, but not when more than one $LIBNAMEs are used.
alldirs=
for found_dir in $rpathdirs; do
alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
done
dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
acl_save_libdir="$libdir"
libdir="$alldirs"
eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
else
dnl The -rpath options are cumulative.
for found_dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$found_dir"
eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
done
fi
fi
if test "X$ltrpathdirs" != "X"; then
dnl When using libtool, the option that works for both libraries and
dnl executables is -R. The -R options are cumulative.
for found_dir in $ltrpathdirs; do
LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
done
fi
])
dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
dnl unless already present in VAR.
dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
dnl contains two or three consecutive elements that belong together.
AC_DEFUN([AC_LIB_APPENDTOVAR],
[
for element in [$2]; do
haveit=
for x in $[$1]; do
AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
if test "X$x" = "X$element"; then
haveit=yes
break
fi
done
if test -z "$haveit"; then
[$1]="${[$1]}${[$1]:+ }$element"
fi
done
])
# lib-ld.m4 serial 3 (gettext-0.13)
dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
dnl This file is free software, distributed under the terms of the GNU
dnl General Public License. As a special exception to the GNU General
dnl Public License, this file may be distributed as part of a program
dnl that contains a configuration script generated by Autoconf, under
dnl the same distribution terms as the rest of that program.
dnl Subroutines of libtool.m4,
dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
dnl with libtool.m4.
dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
AC_DEFUN([AC_LIB_PROG_LD_GNU],