# bip default config file. # Thou shoult change thy password # Default values are commented out. # Listening IP address. This is the IP address bip will listen for incoming # client connections. #ip = "0.0.0.0"; # To connect a client to bip, try the port below, and # be sure to set the password to the value # specified in the network you want to connect to. # Port is 7778 by default. #port = 7778; # If you set this to true, you'll only be able to connect to bip # with a SSL capable IRC client. Be sure to generate a certificate # for bip using scripts/bipgenconfig. #client_side_ssl = false; # This is the file containing the SSL cert/key pair bip'll use to # serve SSL clients. If unset, it defaults to /bip.pem # Supply at least 2048-bit parameters, for example using openssl: # openssl dhparam -out dh.pem 2048; #client_side_ssl_pem = "/bip.pem"; # OpenSSL cipher lists used with SSL client connections. # If not set, OpenSSL default ciphers will be used. See OpenSSL ciphers # command. An example value: "ECDHE-RSA-AES128-GCM-SHA256". #client_side_ciphers = ; # DH parameters bip'll use when serving SSL clients. # Supply at least 2048-bit parameters, for example using openssl: # openssl dhparam -out dh.pem 2048; #client_side_dh_param = "/dh.pem"; # Default OpenSSL cipher lists used with outgoing connections to IRC servers. # If not set, OpenSSL default ciphers will be used. See OpenSSL ciphers # command. An example value: "ECDHE-RSA-AES128-GCM-SHA256". # If not set, OpenSSL default ciphers will be used. #ssl_default_ciphers = ; # Define where the pidfile should be stored. Defaults to /bip.pid. #pid_file=""; # Defaults to /.oidentd.conf #oidentd_file=""; # Set to false and uncomment this line to disable logging and backlogging. #log = true # Define bip's log level : # 0 : only fatal errors # 1 : add others errors # 2 : add warnings # 3 : add info messages # 4 : add debug messages #log_level = 3; # This is where logs go. Channel and private messages will use that # configuration value as a prefix, and then log_format to determine # full log filename. Defaults to /logs. #log_root = ""; # Set to false and uncomment this line to disable bip's internal messages # logging. This is not recommended, a better option is to reduce log_level. #log_system = true; # Log format allows you to make log filenames depend on the log line's # attributes. Here's a list : # %u -> username # %n -> network name # %Y -> 4 digit year # %m -> 2 digit month # %d -> 2 digit day # %h -> 2 digit hour of the day # %c -> destination (#chan, nick, ...) #log_format = "%u/%n/%Y-%m/%c.%d.log"; # Sets the frequency (in seconds) of log syncing (real write to kernel) #log_sync_interval = 5; # Sets the initial delay (in seconds) before a reconnection attempt. # The delay increases with the number of attempts: # delay = reconn_timer * number of attempts #reconn_timer = 120; # Network definition, a name and server info #network { # name = "iiens"; # server { host = "irc.iiens.net"; port = 6667; }; #}; #network { # name = "oftc"; # server { host = "irc.oftc.net"; port = 6667; }; # server { host = "other.oftc.server"; port = 6667; }; #}; # SSL network sample. SSL is per-network option, not per-server ! #network { # name = "oftcs"; # ssl = true; # server { host = "ircs.oftc.net"; port = 9999; }; #}; # Configuration example with one user who connects to two irc networks # To use the multi-server feature: # - define the connections # - chose and setup a different login for each connection # on your irc client: # - Use the multi server feature of your client, the server being each time # the server where bip is running. In your client setup server password to: # username:password:connectionname # - do not store the password in clear here, use the bipmkpw util to generate # a hash # User structure is grouping information for a given user #user { # The name in bip of the user, required. This is used by bip only. #name = ; # This user's password (md5(md5("tata"))) with seed - generated by # bipmkpw, for example: "3880f2b39b3b9cb507b052b695d2680859bfc327". #password = ; # Set this to true if you want this user to have admin privileges on # bip. User will be able to RELOAD bip and see all users' configuration # (except pass). #admin = false; # When bip_use_notice is true, bip will send internal messages like # disconnection notifications or /BIP commands replies as notices # instead of private messages. The default is false. #bip_use_notice = false; # SSL certificates checking mode for user: # - "none" to accept anything; # - "basic" to accept if the certificate is contained in the store; # In "basic" mode, encountered untrusted certificates can be added to # the store interactively by connecting a client and "trusting" them. # - "ca" to do a complete certificate chain checking with the objects # in the store below (you have to put in it every cert, CRL, up to the # root CA). You have to build your store manually, so you may prefer # using "basic" unless you're a crypto zealot... #ssl_check_mode = "none"; # Location of the user's store for server SSL certificate check # In "basic" mode, that must point to a single file with all trusted # certs concatenated together (the interactive "trust" appends to this # file). # In "ca" mode, it can be either: # - a directory of a standard openssl store; you must put PEM objects # (certificates, CRLs...) with .pem extension and run `c_rehash .' in it # - a certificate bundle file containing one or more certificates in PEM # format, enclosed in BEGIN CERTIFICATE / END CERTIFICATE lines # - unspecified: in this case, bip will attempt to use the default # certificate store of the OpenSSL it is built against. This is the default. #ssl_check_store = ""; # Some networks (OFTC at least) allow you to authenticate to nickserv # using client side certificates, see # http://www.oftc.net/oftc/NickServ/CertFP # This is where you put your user's certificate. # The default is not to use a certificate. #ssl_client_certfile = ""; # These will be the default for each connections. #default_nick = ; #default_user = ; #default_realname = ; # Makes bip send the log of each channel and privates while # you were not connected to the proxy upon connection. #backlog = true; # enable backlog #backlog_lines = 10; # number of lines in backlog, 0 means no limit # When true, backlog even lines already backlogged, do not reset backlog # when no client attached anymore. #backlog_always = false; # When true, disables time stamps if you find them ugly. #backlog_no_timestamp = false; # If blreset_on_talk talking on an irc network has the same effect of # issuing /bip blreset , meaning that stuffed logged # before the command won't be read back on backlog. #backlog_reset_on_talk = false; # If you have backlog_reset_on_talk set to true, talking in a query # will reset the backlog for the query. Same goes for channel. With the # following option set to true, talking in a connection will reset the # whole connection. The backlog for the current network is reset. #backlog_reset_connection = false; # If bl_msg_only is true, only channel and private messages will be # backlogged upon the reconnection of a client. Default is false, thus # joins, parts, quits, nick changes, topic changes, ... are backlogged. #backlog_msg_only = false; # A user can have mutiple connections to irc networks. # define a connection: #connection { # used by bip only, required (for example: "oftc"). #name = ; # which ircnet to connect to, required (for example: "oftc"). #network = ; #log = false; # disable or enable logging and backlogging for # the current connection. Overrides global # (top-level) log parameter. # You can define ssl_check_mode here, if you want a different # behavior than the one defined in the parent level ('user' section). #ssl_check_mode = "none"; # If you have multiple IP addresses, you can set the one you # want bip to use here. This options is totally useless to people who # only have one IP address. #vhost = ""; # When source_port is defined, bip will connect to the IRC # server from this port number. That means the IRC server will # see the socket coming from :source_port. #source_port = ""; # These will be sent to the real server. Nick, user and realname are # required. Default values are defined at the parent level # (default_nick, default_user, default_realname). #nick = "othernick"; #user = "otheruser"; #realname = "otheruser"; #password = "server password"; #You can specify this field more than once. BIP will send the text as is to the server. #on_connect_send = "PRIVMSG NickServ :IDENTIFY nspassword"; # Some options: #away_nick = "bip`away"; # Away message to be set when no client is connected #no_client_away_msg = "Having life, knock again later"; #follow_nick = false; #ignore_first_nick = false; #autojoin_on_kick = true; #ignore_server_capab = true; # Autojoined channels: #channel { name = "#bip"; }; # name is required. # Password protected channel #channel { # name = "#elite_UnDeRgR0uNd"; # key = "sikiour"; #}; #another channel { # name = "#huge(28)_activity"; # disable backlogging of this channel. # backlog = false; #}; #}; # another connection (optional) #connection { #name = "iiens"; # used by bip only #network = "iiens"; # which ircnet to connect to # Some options: #away_nick = "bip`away"; #follow_nick = true; #ignore_first_nick = true; # Autojoined channels: #channel { name = "#bip"; }; #}; #};