Version 0.11.3 --------------- * Fixed build issue on systems with libfmt 9.0 (see https://github.com/cryfs/cryfs/issues/432 ) * Fixed build issue on Apple Silicon Macs (see https://github.com/cryfs/homebrew-tap/issues/10 ) Version 0.11.2 --------------- Bugfix: * Time to mount a file system was very long because the build didn't correctly use OpenMP. This is now fixed and file systems should open faster again. Version 0.11.1 --------------- Bugfix: * Fix building of the range-v3 dependency. The conan remote URL for this dependency changed and we have to use the new URL. See https://github.com/cryfs/cryfs/issues/398 * Update to CryptoPP 8.6. This fixes a rare bug where CryptoPP 8.5 encrypts data wrongly, see https://github.com/weidai11/cryptopp/issues/1069 * cryfs-unmount correctly unmounts paths that contain spaces, see https://github.com/cryfs/cryfs/issues/372 * Updated to DokanY 1.2.2.1001 Version 0.11.0 --------------- Backwards Compatibility: * Filesystems created with CryFS 0.10.x can be mounted without requiring a migration. * Filesystems created with CryFS 0.11.x can be mounted by CryFS 0.10.x if you configure it to use a cipher supported by CryFS 0.10.x, e.g. AES-256-GCM. The new default, XChaCha20-Poly1305, is not supported by CryFS 0.10.x. Security: * Added the XChaCha20-Poly1305 encryption cipher. For new filesystems, this will be the default, but you're still able to create a filesystem with the previous default of AES-256-GCM by saying "no" to the "use default settings?" question when creating the file system. Also, old filesystems will not be automatically converted and will keep using AES-256-GCM. XChaCha20-Poly1305 is significantly slower than AES-256-GCM on modern CPUs, but it is more secure for large filesystems (>64GB). For AES-256-GCM, it is recommended to encrypt at most 2^32 blocks, which at the CryFS default block size of 16KB would be 64GB. The more the filesystem grows above that, the more likely it gets that a nonce gets reused and the two corresponding blocks become decryptable by an adversary. Other blocks would not be affected, but an adversary being able to access those two blocks (i.e. 64KB of the stored data) is bad enough. See Section 8.3 in https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-38d.pdf XChaCha20-Poly1305 does not suffer from this constraint and stays secure even if the filesystem gets very large. New platforms: * CryFS now works on devices with Apple M1 silicon Build changes: * Switch to Conan package manager * Allow an easy way to modify how the dependencies are found. This is mostly helpful for package maintainers. See "Using local dependencies" in the README. * Build with macFUSE instead of osxfuse on OSX * Now requires CMake 3.10 or later, and GCC 7 or later, or Clang 7 or later * Fix a build issue on Gentoo systems * Fix a build issue when building with boost 1.77 Improvements: * Display the file system configuration when mounting a file system * Now shows a better error message when failing to load the config file that distinguishes between "wrong password" and "config file not found". New features: * Add support for atime mount options (noatime, strictatime, relatime, atime, nodiratime). * The new default is now *noatime* (in 0.10.x is was relatime). Noatime reduces the amount of writes necessary and with that reduces the probability of synchronization conflicts, and the probability of corrupted file systems if a power outage happens while writing. * Add an --immediate flag to cryfs-unmount that tries to unmount immediately and doesn't wait for processes to release their locks on the file system. * Add a --create-missing-basedir and --create-missing-mountpoint flag to create the base directory and mount directory respectively, if they don't exist, skipping the confirmation prompt. Other: * Updated to spdlog 1.8.5 * Updated to ranges-v3 0.11.0 * Updated to boost 1.75 * Updated to crypto++ 8.5 Version 0.10.4 -------------- Fixed bugs: * Fixed an issue when compiling with GCC 11, see https://github.com/cryfs/cryfs/issues/389 Version 0.10.3 --------------- Fixed bugs: * A comma in the base directory name would make the file system fail to mount, https://github.com/cryfs/cryfs/issues/326 * Fixed determining the user's homedir: If $HOME and the /etc/passwd entry for the current user contradict each other, now $HOME takes preference over /etc/passwd. * Fix Android compilation, https://github.com/cryfs/cryfs/issues/345 * Remove cryfs-stats tool which isn't ready yet and could destroy the file system * Fixed crash on startup when running in an environment that doesn't have $HOME set (e.g. an empty env), https://github.com/cryfs/cryfs/issues/374 Version 0.10.2 --------------- Fixed bugs: * Fix occasional crash in mkdir() on Windows * Fix a race condition when a file descriptor is closed while there's read/write requests for that file being processed. Improvements: * Better logging when local state can't be loaded Other: * Updated to crypto++ 8.2 Version 0.10.1 --------------- Fixed bugs: * If file system migration encounters files or folders with the wrong format in the base directory, it now just ignores them instead of crashing. * When trying to migrate a file system from CryFS 0.9.3 or older, show an error message suggesting to first open it with 0.9.10 because we can't load that anymore. * The '--unmount-idle' parameter works again * Fix building with boost 1.67 Compatibility: * Fixed some incompatibilities with systems using the musl libc * Use boost::stacktrace instead of libbacktrace to build stack traces. This fixes a segfault issue with platforms using libexecinfo and is generally more portable. Other: * Updated to crypto++ 8.1 * Updated to DokanY 1.2.1 * Unit tests can now be run from any directory Version 0.10.0 --------------- New Features & Improvements: * Experimental Windows support * Integrity checks ensure you notice when someone modifies your file system. * File system nodes (files, directories, symlinks) store a parent pointer to the directory that contains them. This information can be used in later versions to resolve some synchronization conflicts. * Allow mounting using system mount tool and /etc/fstab (e.g. mount -t fuse.cryfs basedir mountdir) * Performance improvements * Use relatime instead of strictatime (further performance improvement) * Pass fuse options directly to cryfs (i.e. 'cryfs basedir mountdir -o allow_other' instead of 'cryfs basedir mountdir -- -o allow_other') * CryFS tells the operating system to lock the encryption key to memory, i.e. not swap it to the disk (note: this is best-effort and cannot be guaranteed. Hibernation, for example, will still write the encryption key to the disk). * New block size options: 4KB and 16KB * New default block size: 16KB. This should decrease the size of the ciphertext directory for most users. * Increased scrypt hardness to (N=1048576, r=4, p=8) to make it harder to crack the key while allowing cryfs to take advantage of multicore machines. * cryfs-unmount tool to unmount filesystems Fixed bugs: * `du` shows correct file system size on Mac OS X. * On Mac OS X, Finder shows the correct name for the mount directory Version 0.9.11 -------------- Fixed bugs: * Fix a race condition when a file descriptor is closed while there's read/write requests for that file being processed. Version 0.9.10 -------------- Fixed bugs: * Fixed occasional deadlock (https://github.com/cryfs/cryfs/issues/64) * Fix for reading empty files out of bounds * Fixed race condition (https://github.com/cryfs/cryfs/issues/224 and https://github.com/cryfs/cryfs/issues/243) Version 0.9.9 -------------- Improvements: * Add --allow-filesystem-upgrade option which will upgrade old file systems without asking the user. This will be especially helpful for GUI tools. * Add --version option that shows the CryFS version and exits. * When CryFS fails to load a file system, the process stops with a helpful error code, which can be used by GUI tools to show detailed messages. * Only migrate a file system if the underlying storage format changed Version 0.9.8 -------------- Compatibility: * Runs on Debian with FreeBSD kernel * Runs on FreeBSD 11.1 * Works with Crypto++ 6.0 Improvements: * added a man page Fixed bugs: * `du` shows correct file system size * Updated spdlog dependency to fix build on newer systems Version 0.9.7 -------------- Compatibility: * Runs on FreeBSD * Works with Clang++ 3.8 (Debian experimental or newer Ubuntu systems) * Works with GCC 7 Version 0.9.6 --------------- Fixed bugs: * Fix potential deadlock * Fix potential crash Improvements: * Allow building with -DCRYFS_UPDATE_CHECKS=off, which will create an executable with disabled update checks (the alternative to disable them in the environment also still works). * Automatically disable update checks when running in noninteractive mode. * More detailed error reporting if key derivation fails Compatibility: * Compatible with libcurl version >= 7.50.0, and <= 7.21.6 (tested down to 7.19.0) * Compatible with Crypto++ 5.6.4 * Compatible with compilers running under hardening-wrapper Version 0.9.5 --------------- Fixed Bugs: * Fixed a bug that prevented mounting a file system on Mac OS X. * File system operations correctly update the timestamps (access time, modification time and status change time). * Reacts correctly to fsync() and fdatasync() syscalls by flushing the corresponding data to the disk. Improvements: * When mounting an old file system, CryFS will ask before migrating it to the newest version. * Operating system tools like the mount command or /proc/self/mountinfo report correct file system type and also report the base directory. * Compatibility with GCC 6 Version 0.9.4 --------------- Improvements: * Ciphertext blocks are split into subdirectories (before, all were on top level) to reduce number of files per directory. Some unix tools don't work well with directories with too many entries. Fixed Bugs: * Renaming a file to an existing file (i.e. overwriting an existing file) didn't free the allocated memory for the overwritten file * Renaming a file to an existing file could hurt an invariant in the directory layout (directory entries have to be sorted) and doing so could cause files to seemingly disappear. * Fix a potential deadlock in the cache Compatibility: * The generated .deb packages work for any Ubuntu/Debian based distribution, but will not install the package source for automatic updates if it's an unsupported operating system. Version 0.9.3 --------------- New Features: * The ciphertext block size is configurable. You can use the "--blocksize" command line argument. If not specified, CryFS will ask you for a block size when creating a file system. * It's easier for tools and scripts to use CryFS: If an environment variable CRYFS_FRONTEND=noninteractive is set, we don't ask for options (but take default values for everything that's not specified on command line). Furthermore, in noninteractive mode, we won't ask for password confirmation when creating a file system. The password only has to be sent once to stdin. * You can disable the automatic update check by setting CRYFS_NO_UPDATE_CHECK=true in your environment. Fixed Bugs: * Building CryFS from the GitHub tarball (i.e. when there is no .git directory present) works. * A bug in the fstat implementation caused problems with some text editors (e.g. nano) falsely thinking a file changed since they opened it. * When trying to rename a file to an already existing file name, a bug deleted it instead. * Rename operation allows overwriting existing files, as specified in the rename(2) man page. Compatibility: * The generated .deb packages for Debian also work for the Devuan operating system. Version 0.9.2 --------------- * Experimental support for installing CryFS on Mac OS X using homebrew (0.9.2 is not released for Linux) Version 0.9.1 --------------- * Report file system usage statistics to the operating system (e.g. amount of space used). This information can be queried using the 'df' tool on linux. See https://github.com/cryfs/cryfs/commit/68acc27e88ff5209ca55ddb4e91f5a449d77fb54 * Use stronger scrypt parameters when generating the config file key from the user password. This makes it a bit more secure, but also takes a bit longer to load a file system. See https://github.com/cryfs/cryfs/commit/7f1493ab9210319cab008e71d4ee8f4d7d920f39 * Fix a bug where deleting a non-empty directory could leave some blocks over. See https://github.com/cryfs/cryfs/commit/df041ac84511e4560c4f099cd8cc089d08e05737 Version 0.9.0 --------------- (warning) file systems created with earlier CryFS versions are incompatible with this release. * Fully support file access times * Fix: Password is read from stdin, not from glibc getpass(). This enables external tools (e.g. GUIs) to pass in the password without problems. * Remove --extpass parameter, because that encourages tool writers to do bad things like storing a password in a file and using --extpass="cat filename". The password can now be passed in to stdin without problems, so tools should use that. * Works with zuluMount GUI, https://mhogomchungu.github.io/zuluCrypt/ * Introduce version flags for file system entities to allow future CryFS versions to be backwards-compatible even if the format changes. * (for developers) New git repository layout. All subrepositories have been merged to one directory. * (for developers) Using CMake instead of biicode as build system. Version 0.8.6 --------------- * Fix a deadlock that was caused when a very high load of parallel resize operations was issued, see https://github.com/cryfs/cryfs/issues/3 * Fix a bug that prevented deleting symlinks, see https://github.com/cryfs/cryfs/issues/2 * Gracefully accept modifications to the file access times instead of failing, although they're not stored yet (they will be stored in 0.9.0). This should fix https://github.com/cryfs/cryfs/issues/4 Version 0.8.5 --------------- * Fix package manager warning when installing the .deb package * Offer a default configuration when creating new filesystems * If the given base or mount directory doesn't exist, offer to create them Version 0.8.4 --------------- * Offering .deb packages for Debian and Ubuntu * Compatibility with 32bit systems * Support files larger than 4GB Version 0.8.3 --------------- * Ask for password confirmation when creating new filesystem * Check for new CryFS versions and ask the user to update if a new version is available * Implemented a mechanism that can show warnings about security bugs to users of a certain CryFS version. Let's hope this won't be necessary ;) * Compatibility with GCC 4.8 (that allows compiling on Ubuntu 14.04 for example) Version 0.8.2 --------------- * Mount directory, base directory, logfile and config file can be specified as relative paths * Improved error messages Version 0.8.1 --------------- * Config File Encryption: Configuration files are encrypted with two ciphers. The user specifies a password, which is then used with the scrypt KDF to generate the two encryption keys. - Inner level: Encrypts the config data using the user specified cipher. - Outer level: Encrypts the name of the inner cipher and the inner level ciphertext using aes-256-gcm. The config file is padded to hide the size of the configuration data (including the name of the cipher used). * No external config file needed: If the configuration file is not specified as command line parameter, it will be put into the base directory. This way, the filesystem can be mounted with the password only, without specifying a config file on command line. * Logfiles: Added a --logfile option to specify where logs should be written to. If the option is not specified, CryFs logs to syslog. * Running in Background: Fixed daemonization. When CryFs is run without "-f" flag, it will run in background. * Better error messages when base directory is not existing, not readable or not writeable. * Allow --cipher=xxx to specify cipher on command line. If cryfs is creating a new filesystem, it will use this cipher. If it is opening an existing filesystem, it will check whether this is the cipher used by it. * --show-ciphers shows a list of all supported ciphers * --extpass allows using an external program for password input * --unmount-idle x automatically unmounts the filesystem after x minutes without a filesystem operation.