libcryfs/vendor/cryptopp/vendor_cryptopp/cham_simd.cpp

479 lines
17 KiB
C++

// cham_simd.cpp - written and placed in the public domain by Jeffrey Walton
//
// This source file uses intrinsics and built-ins to gain access to
// SSSE3, ARM NEON and ARMv8a, and Power7 Altivec instructions. A separate
// source file is needed because additional CXXFLAGS are required to enable
// the appropriate instructions sets in some build configurations.
#include "pch.h"
#include "config.h"
#include "cham.h"
#include "misc.h"
// Uncomment for benchmarking C++ against SSE or NEON.
// Do so in both simon.cpp and simon_simd.cpp.
// #undef CRYPTOPP_SSSE3_AVAILABLE
// #undef CRYPTOPP_ARM_NEON_AVAILABLE
#if (CRYPTOPP_SSSE3_AVAILABLE)
#include "adv_simd.h"
# include <pmmintrin.h>
# include <tmmintrin.h>
#endif
#if defined(__XOP__)
# include <ammintrin.h>
# if defined(__GNUC__)
# include <x86intrin.h>
# endif
#endif
// Clang intrinsic casts, http://bugs.llvm.org/show_bug.cgi?id=20670
#define DOUBLE_CAST(x) ((double*)(void*)(x))
#define CONST_DOUBLE_CAST(x) ((const double*)(const void*)(x))
// Squash MS LNK4221 and libtool warnings
extern const char CHAM_SIMD_FNAME[] = __FILE__;
ANONYMOUS_NAMESPACE_BEGIN
using CryptoPP::word16;
using CryptoPP::word32;
#if (CRYPTOPP_SSSE3_AVAILABLE)
//////////////////////////////////////////////////////////////////////////
NAMESPACE_BEGIN(W32) // CHAM128, 32-bit word size
template <unsigned int R>
inline __m128i RotateLeft32(const __m128i& val)
{
#if defined(__XOP__)
return _mm_roti_epi32(val, R);
#else
return _mm_or_si128(
_mm_slli_epi32(val, R), _mm_srli_epi32(val, 32-R));
#endif
}
template <unsigned int R>
inline __m128i RotateRight32(const __m128i& val)
{
#if defined(__XOP__)
return _mm_roti_epi32(val, 32-R);
#else
return _mm_or_si128(
_mm_slli_epi32(val, 32-R), _mm_srli_epi32(val, R));
#endif
}
// Faster than two Shifts and an Or. Thanks to Louis Wingers and Bryan Weeks.
template <>
inline __m128i RotateLeft32<8>(const __m128i& val)
{
#if defined(__XOP__)
return _mm_roti_epi32(val, 8);
#else
const __m128i mask = _mm_set_epi8(14,13,12,15, 10,9,8,11, 6,5,4,7, 2,1,0,3);
return _mm_shuffle_epi8(val, mask);
#endif
}
// Faster than two Shifts and an Or. Thanks to Louis Wingers and Bryan Weeks.
template <>
inline __m128i RotateRight32<8>(const __m128i& val)
{
#if defined(__XOP__)
return _mm_roti_epi32(val, 32-8);
#else
const __m128i mask = _mm_set_epi8(12,15,14,13, 8,11,10,9, 4,7,6,5, 0,3,2,1);
return _mm_shuffle_epi8(val, mask);
#endif
}
template <unsigned int IDX>
inline __m128i UnpackXMM(const __m128i& a, const __m128i& b, const __m128i& c, const __m128i& d)
{
// Should not be instantiated
CRYPTOPP_UNUSED(a); CRYPTOPP_UNUSED(b);
CRYPTOPP_UNUSED(c); CRYPTOPP_UNUSED(d);
CRYPTOPP_ASSERT(0);
return _mm_setzero_si128();
}
template <>
inline __m128i UnpackXMM<0>(const __m128i& a, const __m128i& b, const __m128i& c, const __m128i& d)
{
// The shuffle converts to and from little-endian for SSE. A specialized
// CHAM implementation can avoid the shuffle by framing the data for
// encryption, decryption and benchmarks. The library cannot take the
// speed-up because of the byte oriented API.
const __m128i r1 = _mm_unpacklo_epi32(a, b);
const __m128i r2 = _mm_unpacklo_epi32(c, d);
return _mm_shuffle_epi8(_mm_unpacklo_epi64(r1, r2),
_mm_set_epi8(12,13,14,15, 8,9,10,11, 4,5,6,7, 0,1,2,3));
}
template <>
inline __m128i UnpackXMM<1>(const __m128i& a, const __m128i& b, const __m128i& c, const __m128i& d)
{
// The shuffle converts to and from little-endian for SSE. A specialized
// CHAM implementation can avoid the shuffle by framing the data for
// encryption, decryption and benchmarks. The library cannot take the
// speed-up because of the byte oriented API.
const __m128i r1 = _mm_unpacklo_epi32(a, b);
const __m128i r2 = _mm_unpacklo_epi32(c, d);
return _mm_shuffle_epi8(_mm_unpackhi_epi64(r1, r2),
_mm_set_epi8(12,13,14,15, 8,9,10,11, 4,5,6,7, 0,1,2,3));
}
template <>
inline __m128i UnpackXMM<2>(const __m128i& a, const __m128i& b, const __m128i& c, const __m128i& d)
{
// The shuffle converts to and from little-endian for SSE. A specialized
// CHAM implementation can avoid the shuffle by framing the data for
// encryption, decryption and benchmarks. The library cannot take the
// speed-up because of the byte oriented API.
const __m128i r1 = _mm_unpackhi_epi32(a, b);
const __m128i r2 = _mm_unpackhi_epi32(c, d);
return _mm_shuffle_epi8(_mm_unpacklo_epi64(r1, r2),
_mm_set_epi8(12,13,14,15, 8,9,10,11, 4,5,6,7, 0,1,2,3));
}
template <>
inline __m128i UnpackXMM<3>(const __m128i& a, const __m128i& b, const __m128i& c, const __m128i& d)
{
// The shuffle converts to and from little-endian for SSE. A specialized
// CHAM implementation can avoid the shuffle by framing the data for
// encryption, decryption and benchmarks. The library cannot take the
// speed-up because of the byte oriented API.
const __m128i r1 = _mm_unpackhi_epi32(a, b);
const __m128i r2 = _mm_unpackhi_epi32(c, d);
return _mm_shuffle_epi8(_mm_unpackhi_epi64(r1, r2),
_mm_set_epi8(12,13,14,15, 8,9,10,11, 4,5,6,7, 0,1,2,3));
}
template <unsigned int IDX>
inline __m128i UnpackXMM(const __m128i& v)
{
// Should not be instantiated
CRYPTOPP_UNUSED(v); CRYPTOPP_ASSERT(0);
return _mm_setzero_si128();
}
template <>
inline __m128i UnpackXMM<0>(const __m128i& v)
{
return _mm_shuffle_epi8(v, _mm_set_epi8(0,1,2,3, 0,1,2,3, 0,1,2,3, 0,1,2,3));
}
template <>
inline __m128i UnpackXMM<1>(const __m128i& v)
{
return _mm_shuffle_epi8(v, _mm_set_epi8(4,5,6,7, 4,5,6,7, 4,5,6,7, 4,5,6,7));
}
template <>
inline __m128i UnpackXMM<2>(const __m128i& v)
{
return _mm_shuffle_epi8(v, _mm_set_epi8(8,9,10,11, 8,9,10,11, 8,9,10,11, 8,9,10,11));
}
template <>
inline __m128i UnpackXMM<3>(const __m128i& v)
{
return _mm_shuffle_epi8(v, _mm_set_epi8(12,13,14,15, 12,13,14,15, 12,13,14,15, 12,13,14,15));
}
template <unsigned int IDX>
inline __m128i RepackXMM(const __m128i& a, const __m128i& b, const __m128i& c, const __m128i& d)
{
return UnpackXMM<IDX>(a, b, c, d);
}
template <unsigned int IDX>
inline __m128i RepackXMM(const __m128i& v)
{
return UnpackXMM<IDX>(v);
}
inline void CHAM128_Enc_Block(__m128i &block0,
const word32 *subkeys, unsigned int rounds)
{
// Rearrange the data for vectorization. UnpackXMM includes a
// little-endian swap for SSE. Thanks to Peter Cordes for help
// with packing and unpacking.
// [A1 A2 A3 A4][B1 B2 B3 B4] ... => [A1 B1 C1 D1][A2 B2 C2 D2] ...
__m128i a = UnpackXMM<0>(block0);
__m128i b = UnpackXMM<1>(block0);
__m128i c = UnpackXMM<2>(block0);
__m128i d = UnpackXMM<3>(block0);
__m128i counter = _mm_set_epi32(0,0,0,0);
__m128i increment = _mm_set_epi32(1,1,1,1);
const unsigned int MASK = (rounds == 80 ? 7 : 15);
for (int i=0; i<static_cast<int>(rounds); i+=4)
{
__m128i k, k1, k2, t1, t2;
k = _mm_castpd_si128(_mm_load_sd(CONST_DOUBLE_CAST(&subkeys[(i+0) & MASK])));
// Shuffle out two subkeys
k1 = _mm_shuffle_epi8(k, _mm_set_epi8(3,2,1,0, 3,2,1,0, 3,2,1,0, 3,2,1,0));
k2 = _mm_shuffle_epi8(k, _mm_set_epi8(7,6,5,4, 7,6,5,4, 7,6,5,4, 7,6,5,4));
t1 = _mm_xor_si128(a, counter);
t2 = _mm_xor_si128(RotateLeft32<1>(b), k1);
a = RotateLeft32<8>(_mm_add_epi32(t1, t2));
counter = _mm_add_epi32(counter, increment);
t1 = _mm_xor_si128(b, counter);
t2 = _mm_xor_si128(RotateLeft32<8>(c), k2);
b = RotateLeft32<1>(_mm_add_epi32(t1, t2));
counter = _mm_add_epi32(counter, increment);
k = _mm_castpd_si128(_mm_load_sd(CONST_DOUBLE_CAST(&subkeys[(i+2) & MASK])));
// Shuffle out two subkeys
k1 = _mm_shuffle_epi8(k, _mm_set_epi8(3,2,1,0, 3,2,1,0, 3,2,1,0, 3,2,1,0));
k2 = _mm_shuffle_epi8(k, _mm_set_epi8(7,6,5,4, 7,6,5,4, 7,6,5,4, 7,6,5,4));
t1 = _mm_xor_si128(c, counter);
t2 = _mm_xor_si128(RotateLeft32<1>(d), k1);
c = RotateLeft32<8>(_mm_add_epi32(t1, t2));
counter = _mm_add_epi32(counter, increment);
t1 = _mm_xor_si128(d, counter);
t2 = _mm_xor_si128(RotateLeft32<8>(a), k2);
d = RotateLeft32<1>(_mm_add_epi32(t1, t2));
counter = _mm_add_epi32(counter, increment);
}
// [A1 B1 C1 D1][A2 B2 C2 D2] ... => [A1 A2 A3 A4][B1 B2 B3 B4] ...
block0 = RepackXMM<0>(a,b,c,d);
}
inline void CHAM128_Dec_Block(__m128i &block0,
const word32 *subkeys, unsigned int rounds)
{
// Rearrange the data for vectorization. UnpackXMM includes a
// little-endian swap for SSE. Thanks to Peter Cordes for help
// with packing and unpacking.
// [A1 A2 A3 A4][B1 B2 B3 B4] ... => [A1 B1 C1 D1][A2 B2 C2 D2] ...
__m128i a = UnpackXMM<0>(block0);
__m128i b = UnpackXMM<1>(block0);
__m128i c = UnpackXMM<2>(block0);
__m128i d = UnpackXMM<3>(block0);
__m128i counter = _mm_set_epi32(rounds-1,rounds-1,rounds-1,rounds-1);
__m128i decrement = _mm_set_epi32(1,1,1,1);
const unsigned int MASK = (rounds == 80 ? 7 : 15);
for (int i = static_cast<int>(rounds)-1; i >= 0; i-=4)
{
__m128i k, k1, k2, t1, t2;
k = _mm_castpd_si128(_mm_load_sd(CONST_DOUBLE_CAST(&subkeys[(i-1) & MASK])));
// Shuffle out two subkeys
k1 = _mm_shuffle_epi8(k, _mm_set_epi8(7,6,5,4, 7,6,5,4, 7,6,5,4, 7,6,5,4));
k2 = _mm_shuffle_epi8(k, _mm_set_epi8(3,2,1,0, 3,2,1,0, 3,2,1,0, 3,2,1,0));
// Odd round
t1 = RotateRight32<1>(d);
t2 = _mm_xor_si128(RotateLeft32<8>(a), k1);
d = _mm_xor_si128(_mm_sub_epi32(t1, t2), counter);
counter = _mm_sub_epi32(counter, decrement);
// Even round
t1 = RotateRight32<8>(c);
t2 = _mm_xor_si128(RotateLeft32<1>(d), k2);
c = _mm_xor_si128(_mm_sub_epi32(t1, t2), counter);
counter = _mm_sub_epi32(counter, decrement);
k = _mm_castpd_si128(_mm_load_sd(CONST_DOUBLE_CAST(&subkeys[(i-3) & MASK])));
// Shuffle out two subkeys
k1 = _mm_shuffle_epi8(k, _mm_set_epi8(7,6,5,4, 7,6,5,4, 7,6,5,4, 7,6,5,4));
k2 = _mm_shuffle_epi8(k, _mm_set_epi8(3,2,1,0, 3,2,1,0, 3,2,1,0, 3,2,1,0));
// Odd round
t1 = RotateRight32<1>(b);
t2 = _mm_xor_si128(RotateLeft32<8>(c), k1);
b = _mm_xor_si128(_mm_sub_epi32(t1, t2), counter);
counter = _mm_sub_epi32(counter, decrement);
// Even round
t1 = RotateRight32<8>(a);
t2 = _mm_xor_si128(RotateLeft32<1>(b), k2);
a = _mm_xor_si128(_mm_sub_epi32(t1, t2), counter);
counter = _mm_sub_epi32(counter, decrement);
}
// [A1 B1 C1 D1][A2 B2 C2 D2] ... => [A1 A2 A3 A4][B1 B2 B3 B4] ...
block0 = RepackXMM<0>(a,b,c,d);
}
inline void CHAM128_Enc_4_Blocks(__m128i &block0, __m128i &block1,
__m128i &block2, __m128i &block3, const word32 *subkeys, unsigned int rounds)
{
// Rearrange the data for vectorization. UnpackXMM includes a
// little-endian swap for SSE. Thanks to Peter Cordes for help
// with packing and unpacking.
// [A1 A2 A3 A4][B1 B2 B3 B4] ... => [A1 B1 C1 D1][A2 B2 C2 D2] ...
__m128i a = UnpackXMM<0>(block0, block1, block2, block3);
__m128i b = UnpackXMM<1>(block0, block1, block2, block3);
__m128i c = UnpackXMM<2>(block0, block1, block2, block3);
__m128i d = UnpackXMM<3>(block0, block1, block2, block3);
__m128i counter = _mm_set_epi32(0,0,0,0);
__m128i increment = _mm_set_epi32(1,1,1,1);
const unsigned int MASK = (rounds == 80 ? 7 : 15);
for (int i=0; i<static_cast<int>(rounds); i+=4)
{
__m128i k, k1, k2, t1, t2;
k = _mm_castpd_si128(_mm_load_sd(CONST_DOUBLE_CAST(&subkeys[(i+0) & MASK])));
// Shuffle out two subkeys
k1 = _mm_shuffle_epi8(k, _mm_set_epi8(3,2,1,0, 3,2,1,0, 3,2,1,0, 3,2,1,0));
k2 = _mm_shuffle_epi8(k, _mm_set_epi8(7,6,5,4, 7,6,5,4, 7,6,5,4, 7,6,5,4));
t1 = _mm_xor_si128(a, counter);
t2 = _mm_xor_si128(RotateLeft32<1>(b), k1);
a = RotateLeft32<8>(_mm_add_epi32(t1, t2));
counter = _mm_add_epi32(counter, increment);
t1 = _mm_xor_si128(b, counter);
t2 = _mm_xor_si128(RotateLeft32<8>(c), k2);
b = RotateLeft32<1>(_mm_add_epi32(t1, t2));
counter = _mm_add_epi32(counter, increment);
k = _mm_castpd_si128(_mm_load_sd(CONST_DOUBLE_CAST(&subkeys[(i+2) & MASK])));
// Shuffle out two subkeys
k1 = _mm_shuffle_epi8(k, _mm_set_epi8(3,2,1,0, 3,2,1,0, 3,2,1,0, 3,2,1,0));
k2 = _mm_shuffle_epi8(k, _mm_set_epi8(7,6,5,4, 7,6,5,4, 7,6,5,4, 7,6,5,4));
t1 = _mm_xor_si128(c, counter);
t2 = _mm_xor_si128(RotateLeft32<1>(d), k1);
c = RotateLeft32<8>(_mm_add_epi32(t1, t2));
counter = _mm_add_epi32(counter, increment);
t1 = _mm_xor_si128(d, counter);
t2 = _mm_xor_si128(RotateLeft32<8>(a), k2);
d = RotateLeft32<1>(_mm_add_epi32(t1, t2));
counter = _mm_add_epi32(counter, increment);
}
// [A1 B1 C1 D1][A2 B2 C2 D2] ... => [A1 A2 A3 A4][B1 B2 B3 B4] ...
block0 = RepackXMM<0>(a,b,c,d);
block1 = RepackXMM<1>(a,b,c,d);
block2 = RepackXMM<2>(a,b,c,d);
block3 = RepackXMM<3>(a,b,c,d);
}
inline void CHAM128_Dec_4_Blocks(__m128i &block0, __m128i &block1,
__m128i &block2, __m128i &block3, const word32 *subkeys, unsigned int rounds)
{
// Rearrange the data for vectorization. UnpackXMM includes a
// little-endian swap for SSE. Thanks to Peter Cordes for help
// with packing and unpacking.
// [A1 A2 A3 A4][B1 B2 B3 B4] ... => [A1 B1 C1 D1][A2 B2 C2 D2] ...
__m128i a = UnpackXMM<0>(block0, block1, block2, block3);
__m128i b = UnpackXMM<1>(block0, block1, block2, block3);
__m128i c = UnpackXMM<2>(block0, block1, block2, block3);
__m128i d = UnpackXMM<3>(block0, block1, block2, block3);
__m128i counter = _mm_set_epi32(rounds-1,rounds-1,rounds-1,rounds-1);
__m128i decrement = _mm_set_epi32(1,1,1,1);
const unsigned int MASK = (rounds == 80 ? 7 : 15);
for (int i = static_cast<int>(rounds)-1; i >= 0; i-=4)
{
__m128i k, k1, k2, t1, t2;
k = _mm_castpd_si128(_mm_load_sd(CONST_DOUBLE_CAST(&subkeys[(i-1) & MASK])));
// Shuffle out two subkeys
k1 = _mm_shuffle_epi8(k, _mm_set_epi8(7,6,5,4, 7,6,5,4, 7,6,5,4, 7,6,5,4));
k2 = _mm_shuffle_epi8(k, _mm_set_epi8(3,2,1,0, 3,2,1,0, 3,2,1,0, 3,2,1,0));
// Odd round
t1 = RotateRight32<1>(d);
t2 = _mm_xor_si128(RotateLeft32<8>(a), k1);
d = _mm_xor_si128(_mm_sub_epi32(t1, t2), counter);
counter = _mm_sub_epi32(counter, decrement);
// Even round
t1 = RotateRight32<8>(c);
t2 = _mm_xor_si128(RotateLeft32<1>(d), k2);
c = _mm_xor_si128(_mm_sub_epi32(t1, t2), counter);
counter = _mm_sub_epi32(counter, decrement);
k = _mm_castpd_si128(_mm_load_sd(CONST_DOUBLE_CAST(&subkeys[(i-3) & MASK])));
// Shuffle out two subkeys
k1 = _mm_shuffle_epi8(k, _mm_set_epi8(7,6,5,4, 7,6,5,4, 7,6,5,4, 7,6,5,4));
k2 = _mm_shuffle_epi8(k, _mm_set_epi8(3,2,1,0, 3,2,1,0, 3,2,1,0, 3,2,1,0));
// Odd round
t1 = RotateRight32<1>(b);
t2 = _mm_xor_si128(RotateLeft32<8>(c), k1);
b = _mm_xor_si128(_mm_sub_epi32(t1, t2), counter);
counter = _mm_sub_epi32(counter, decrement);
// Even round
t1 = RotateRight32<8>(a);
t2 = _mm_xor_si128(RotateLeft32<1>(b), k2);
a = _mm_xor_si128(_mm_sub_epi32(t1, t2), counter);
counter = _mm_sub_epi32(counter, decrement);
}
// [A1 B1 C1 D1][A2 B2 C2 D2] ... => [A1 A2 A3 A4][B1 B2 B3 B4] ...
block0 = RepackXMM<0>(a,b,c,d);
block1 = RepackXMM<1>(a,b,c,d);
block2 = RepackXMM<2>(a,b,c,d);
block3 = RepackXMM<3>(a,b,c,d);
}
//////////////////////////////////////////////////////////////////////////
NAMESPACE_END // W32
#endif // CRYPTOPP_SSSE3_AVAILABLE
ANONYMOUS_NAMESPACE_END
NAMESPACE_BEGIN(CryptoPP)
#if defined(CRYPTOPP_SSSE3_AVAILABLE)
size_t CHAM128_Enc_AdvancedProcessBlocks_SSSE3(const word32* subKeys, size_t rounds,
const byte *inBlocks, const byte *xorBlocks, byte *outBlocks, size_t length, word32 flags)
{
return AdvancedProcessBlocks128_4x1_SSE(W32::CHAM128_Enc_Block, W32::CHAM128_Enc_4_Blocks,
subKeys, rounds, inBlocks, xorBlocks, outBlocks, length, flags);
}
size_t CHAM128_Dec_AdvancedProcessBlocks_SSSE3(const word32* subKeys, size_t rounds,
const byte *inBlocks, const byte *xorBlocks, byte *outBlocks, size_t length, word32 flags)
{
return AdvancedProcessBlocks128_4x1_SSE(W32::CHAM128_Dec_Block, W32::CHAM128_Dec_4_Blocks,
subKeys, rounds, inBlocks, xorBlocks, outBlocks, length, flags);
}
#endif // CRYPTOPP_SSSE3_AVAILABLE
NAMESPACE_END