libgocryptfs/Documentation/MANPAGE.md

401 lines
14 KiB
Markdown
Raw Normal View History

% GOCRYPTFS(1)
% github.com/rfjakob
% Aug 2017
NAME
====
gocryptfs - create or mount an encrypted filesystem
SYNOPSIS
========
#### Initialize encrypted filesystem
`gocryptfs -init [OPTIONS] CIPHERDIR`
#### Mount
`gocryptfs [OPTIONS] CIPHERDIR MOUNTPOINT [-o COMMA-SEPARATED-OPTIONS]`
#### Change password
`gocryptfs -passwd [OPTIONS] CIPHERDIR`
#### Check consistency
`gocryptfs -fsck [OPTIONS] CIPHERDIR`
DESCRIPTION
===========
gocryptfs is an encrypted overlay filesystem written in Go.
Encrypted files are stored in CIPHERDIR, and a plain-text
view can be presented by mounting the filesystem at MOUNTPOINT.
gocryptfs was inspired by encfs(1) and strives to fix its
security issues while providing good performance.
OPTIONS
=======
Available options are listed below.
#### -aessiv
Use the AES-SIV encryption mode. This is slower than GCM but is
secure with deterministic nonces as used in "-reverse" mode.
#### -allow_other
By default, the Linux kernel prevents any other user (even root) to
access a mounted FUSE filesystem. Settings this option allows access for
other users, subject to file permission checking. Only works if
user_allow_other is set in /etc/fuse.conf. This option is equivalent to
"allow_other" plus "default_permissions" described in fuse(8).
#### -config string
Use specified config file instead of `CIPHERDIR/gocryptfs.conf`.
#### -cpuprofile string
Write cpu profile to specified file.
#### -ctlsock string
Create a control socket at the specified location. The socket can be
used to decrypt and encrypt paths inside the filesystem. When using
2018-01-09 20:01:35 +01:00
this option, make sure that the directory you place the socket in is
not world-accessible. For example, `/run/user/UID/my.socket` would
be suitable.
#### -d, -debug
Enable debug output.
#### -dev, -nodev
Enable (`-dev`) or disable (`-nodev`) device files in a gocryptfs mount
(default: `-nodev`). If both are specified, `-nodev` takes precedence.
You need root permissions to use `-dev`.
#### -devrandom
Use /dev/random for generating the master key instead of the default Go
implementation. This is especially useful on embedded systems with Go versions
prior to 1.9, which fall back to weak random data when the getrandom syscall
is blocking. Using this option can block indefinitely when the kernel cannot
harvest enough entropy.
#### -exec, -noexec
Enable (`-exec`) or disable (`-noexec`) executables in a gocryptfs mount
(default: `-exec`). If both are specified, `-noexec` takes precedence.
#### -extpass string
Use an external program (like ssh-askpass) for the password prompt.
The program should return the password on stdout, a trailing newline is
stripped by gocryptfs. Using something like "cat /mypassword.txt" allows
2018-01-09 20:01:35 +01:00
one to mount the gocryptfs filesystem without user interaction.
#### -fg, -f
Stay in the foreground instead of forking away. Implies "-nosyslog".
2018-01-09 20:01:35 +01:00
For compatibility, "-f" is also accepted, but "-fg" is preferred.
#### -force_owner string
If given a string of the form "uid:gid" (where both "uid" and "gid" are
substituted with positive integers), presents all files as owned by the given
uid and gid, regardless of their actual ownership. Implies "allow_other".
This is rarely desired behavior: One should *usually* run gocryptfs as the
account which owns the backing-store files, which should *usually* be one and
the same with the account intended to access the decrypted content. An example
of a case where this may be useful is a situation where content is stored on a
filesystem that doesn't properly support UNIX ownership and permissions.
#### -forcedecode
Force decode of encrypted files even if the integrity check fails, instead of
failing with an IO error. Warning messages are still printed to syslog if corrupted
files are encountered.
It can be useful to recover files from disks with bad sectors or other corrupted
media. It shall not be used if the origin of corruption is unknown, specially
if you want to run executable files.
For corrupted media, note that you probably want to use dd_rescue(1)
instead, which will recover all but the corrupted 4kB block.
This option makes no sense in reverse mode. It requires gocryptfs to be compiled with openssl
support and implies -openssl true. Because of this, it is not compatible with -aessiv,
that uses built-in Go crypto.
Setting this option forces the filesystem to read-only and noexec.
#### -fsck
Check CIPHERDIR for consistency. If corruption is found, the
exit code is 26.
#### -fsname string
Override the filesystem name (first column in df -T). Can also be
passed as "-o fsname=" and is equivalent to libfuse's option of the
same name. By default, CIPHERDIR is used.
#### -fusedebug
Enable fuse library debug output.
#### -h, -help
Print a short help text that shows the more-often used options.
#### -hh
Long help text, shows all available options.
#### -hkdf
Use HKDF to derive separate keys for content and name encryption from
the master key.
#### -info
Pretty-print the contents of the config file for human consumption,
stripping out sensitive data.
#### -init
Initialize encrypted directory.
#### -ko
2018-01-09 20:01:35 +01:00
Pass additional mount options to the kernel (comma-separated list).
FUSE filesystems are mounted with "nodev,nosuid" by default. If gocryptfs
runs as root, you can enable device files by passing the opposite mount option,
"dev", and if you want to enable suid-binaries, pass "suid".
"ro" (equivalent to passing the "-ro" option) and "noexec" may also be
interesting. For a complete list see the section
`FILESYSTEM-INDEPENDENT MOUNT OPTIONS` in mount(8). On MacOS, "local",
"noapplexattr", "noappledouble" may be interesting.
Note that unlike "-o", "-ko" is a regular option and must be passed BEFORE
the directories. Example:
gocryptfs -ko noexec /tmp/foo /tmp/bar
#### -longnames
Store names longer than 176 bytes in extra files (default true)
This flag is useful when recovering old gocryptfs filesystems using
"-masterkey". It is ignored (stays at the default) otherwise.
#### -masterkey string
Use a explicit master key specified on the command line or, if the special
value "stdin" is used, read the masterkey from stdin. This
option can be used to mount a gocryptfs filesystem without a config file.
Note that the command line, and with it the master key, is visible to
anybody on the machine who can execute "ps -auxwww". Use "-masterkey=stdin"
to avoid that risk.
The masterkey option is meant as a recovery option for emergencies, such as
if you have forgotten the password or lost the config file.
Even if a config file exists, it will not be used. All non-standard
settings have to be passed on the command line: `-aessiv` when you
mount a filesystem that was created using reverse mode, or
`-plaintextnames` for a filesystem that was created with that option.
Examples:
-masterkey=6f717d8b-6b5f8e8a-fd0aa206-778ec093-62c5669b-abd229cd-241e00cd-b4d6713d
-masterkey=stdin
#### -memprofile string
Write memory profile to the specified file. This is useful when debugging
memory usage of gocryptfs.
#### -nodev
See `-dev, -nodev`.
#### -noexec
See `-exec, -noexec`.
#### -nonempty
Allow mounting over non-empty directories. FUSE by default disallows
2018-01-09 20:01:35 +01:00
this to prevent accidental shadowing of files.
#### -noprealloc
Disable preallocation before writing. By default, gocryptfs
preallocates the space the next write will take using fallocate(2)
in mode FALLOC_FL_KEEP_SIZE. The preallocation makes sure it cannot
run out of space in the middle of the write, which would cause the
last 4kB block to be corrupt and unreadable.
On ext4, preallocation is fast and does not cause a
noticeable performance hit. Unfortunately, on Btrfs, preallocation
is very slow, especially on rotational HDDs. The "-noprealloc"
option gives users the choice to trade robustness against
out-of-space errors for a massive speedup.
For benchmarks and more details of the issue see
https://github.com/rfjakob/gocryptfs/issues/63 .
#### -nosyslog
Diagnostic messages are normally redirected to syslog once gocryptfs
daemonizes. This option disables the redirection and messages will
continue be printed to stdout and stderr.
#### -nosuid
See `-suid, -nosuid`.
#### -notifypid int
Send USR1 to the specified process after successful mount. This is
used internally for daemonization.
#### -o COMMA-SEPARATED-OPTIONS
For compatibility with mount(1), options are also accepted as
"-o COMMA-SEPARATED-OPTIONS" at the end of the command line.
For example, "-o q,zerokey" is equivalent to passing "-q -zerokey".
Note that you can only use options that are understood by gocryptfs
with "-o". If you want to pass special flags to the kernel, you should
use "-ko" (*k*ernel *o*ption). This is different in libfuse-based
filesystems, that automatically pass any "-o" options they do not
understand along to the kernel.
Example:
gocryptfs /tmp/foo /tmp/bar -o q,zerokey
#### -openssl bool/"auto"
Use OpenSSL instead of built-in Go crypto (default "auto"). Using
built-in crypto is 4x slower unless your CPU has AES instructions and
you are using Go 1.6+. In mode "auto", gocrypts chooses the faster
option.
#### -passfile string
Read password from the specified file. This is a shortcut for
specifying '-extpass="/bin/cat -- FILE"'.
#### -passwd
Change the password. Will ask for the old password, check if it is
correct, and ask for a new one.
This can be used together with `-masterkey` if
you forgot the password but know the master key. Note that without the
old password, gocryptfs cannot tell if the master key is correct and will
overwrite the old one without mercy. It will, however, create a backup copy
of the old config file as `gocryptfs.conf.bak`. Delete it after
you have verified that you can access your files with the
new password.
#### -plaintextnames
Do not encrypt file names and symlink targets.
#### -q, -quiet
Quiet - silence informational messages.
#### -raw64
Use unpadded base64 encoding for file names. This gets rid of the
trailing "\\=\\=". A filesystem created with this option can only be
mounted using gocryptfs v1.2 and higher.
#### -reverse
Reverse mode shows a read-only encrypted view of a plaintext
directory. Implies "-aessiv".
#### -rw, -ro
Mount the filesystem read-write (`-rw`, default) or read-only (`-ro`).
If both are specified, `-ro` takes precence.
#### -scryptn int
scrypt cost parameter expressed as scryptn=log2(N). Possible values are
10 to 28, representing N=2^10 to N=2^28.
Setting this to a lower
value speeds up mounting and reduces its memory needs, but makes
the password susceptible to brute-force attacks. The default is 16.
#### -serialize_reads
The kernel usually submits multiple concurrent reads to service
userspace requests and kernel readahead. gocryptfs serves them
concurrently and in arbitrary order. On backing storage that performs
poorly for concurrent or out-of-order reads (like Amazon Cloud Drive),
2018-01-09 20:01:35 +01:00
this behavior can cause very slow read speeds.
The `-serialize_reads`
option does two things: (1) reads will be submitted one-by-one (no
concurrency) and (2) gocryptfs tries to order the reads by file
offset order.
The ordering requires gocryptfs to wait a certain time before
submitting a read. The serialization introduces extra locking.
These factors will limit throughput to below 70MB/s.
For more details visit https://github.com/rfjakob/gocryptfs/issues/92 .
#### -sharedstorage
Enable work-arounds so gocryptfs works better when the backing
storage directory is concurrently accessed by multiple gocryptfs
instances.
At the moment, it does two things:
1. Disable stat() caching so changes to the backing storage show up
immediately.
2. Disable hard link tracking, as the inode numbers on the backing
storage are not stable when files are deleted and re-created behind
our back. This would otherwise produce strange "file does not exist"
and other errors.
When "-sharedstorage" is active, performance is reduced and hard
links cannot be created.
Even with this flag set, you may hit occasional problems. Running
gocryptfs on shared storage does not receive as much testing as the
usual (exclusive) use-case. Please test your workload in advance
and report any problems you may hit.
More info: https://github.com/rfjakob/gocryptfs/issues/156
#### -speed
Run crypto speed test. Benchmark Go's built-in GCM against OpenSSL
(if available). The library that will be selected on "-openssl=auto"
(the default) is marked as such.
#### -suid, -nosuid
Enable (`-suid`) or disable (`-nosuid`) suid and sgid executables in a gocryptfs
mount (default: `-nosuid`). If both are specified, `-nosuid` takes precedence.
You need root permissions to use `-suid`.
#### -trace string
Write execution trace to file. View the trace using "go tool trace FILE".
#### -version
2018-01-09 20:01:35 +01:00
Print version and exit. The output contains three fields separated by ";".
Example: "gocryptfs v1.1.1-5-g75b776c; go-fuse 6b801d3; 2016-11-01 go1.7.3".
Field 1 is the gocryptfs version, field 2 is the version of the go-fuse
library, field 3 is the compile date and the Go version that was
used.
#### -wpanic
When encountering a warning, panic and exit immediately. This is
useful in regression testing.
#### -zerokey
Use all-zero dummy master key. This options is only intended for
automated testing as it does not provide any security.
#### --
Stop option parsing. Helpful when CIPHERDIR may start with a
dash "-".
2016-01-06 16:55:38 +01:00
EXAMPLES
========
Create an encrypted filesystem in directory "g1" and mount it on "g2":
2016-01-06 16:55:38 +01:00
mkdir g1 g2
gocryptfs -init g1
gocryptfs g1 g2
2016-01-06 16:55:38 +01:00
Mount an ecrypted view of joe's home directory using reverse mode:
2016-01-06 16:55:38 +01:00
mkdir /home/joe.crypt
gocryptfs -init -reverse /home/joe
gocryptfs -reverse /home/joe /home/joe.crypt
2017-02-26 19:30:28 +01:00
EXIT CODES
==========
0: success
6: CIPHERDIR is not an empty directory (on "-init")
10: MOUNTPOINT is not an empty directory
2017-02-26 19:30:28 +01:00
12: password incorrect
22: password is empty (on "-init")
23: could not read gocryptfs.conf
24: could not write gocryptfs.conf (on "-init" or "-password")
26: fsck found errors
2017-02-26 19:30:28 +01:00
other: please check the error message
SEE ALSO
========
mount(2) fuse(8) fallocate(2) encfs(1)