Commit Graph

41 Commits

Author SHA1 Message Date
Jakob Unterwurzacher
edb3e19cb5 fix golint complaints 2017-04-29 14:50:58 +02:00
danim7
f1945c4daa Add -forcedecode
Force decode of encrypted files even if the integrity check fails, instead of
failing with an IO error. Warning messages are still printed to syslog if corrupted
files are encountered.
It can be useful to recover files from disks with bad sectors or other corrupted
media.

Closes https://github.com/rfjakob/gocryptfs/pull/102 .
2017-04-23 23:11:56 +02:00
Jakob Unterwurzacher
778c955eea fusefrontend_reverse: switch to stable inode numbers
The volatile inode numbers that we used before cause "find" to complain and error out.
Virtual inode numbers are derived from their parent file inode number by adding 10^19,
which is hopefully large enough no never cause problems in practice.

If the backing directory contains inode numbers higher than that, stat() on these files
will return EOVERFLOW.

Example directory lising after this change:

  $ ls -i
               926473 gocryptfs.conf
  1000000000000926466 gocryptfs.diriv
               944878 gocryptfs.longname.hmZojMqC6ns47eyVxLlH2ailKjN9bxfosi3C-FR8mjA
  1000000000000944878 gocryptfs.longname.hmZojMqC6ns47eyVxLlH2ailKjN9bxfosi3C-FR8mjA.name
               934408 Tdfbf02CKsTaGVYnAsSypA
2017-04-01 17:19:15 +02:00
Jakob Unterwurzacher
e87aebb835 fusefrontend_reverse: drop unused dirIVAttr function
This has long been replaced by virtualFile.GetAttr().
2017-04-01 17:05:55 +02:00
Jakob Unterwurzacher
acb73ca436 fusefrontend_reverse: convert fmt.Printf calls to tlog
The fmt.Printfs output would end up in the paniclog.
2017-04-01 15:49:53 +02:00
danim7
fb1b8ced38 fusefrontend_reverse: consistent file owners for .diriv, .name files
This PR addresses the Issue #95, about "Confusing file owner for
longname files in reverse mode".

It affects only the reverse mode, and introduces two
modifications:

1) The "gocryptfs.longname.XXXX.name" files are assigned the owner and
group of the underlying plaintext file. Therefore it is consistent
with the file "gocryptfs.longname.XXXX" that has the encrypted
contents of the plaintext file.

2) The two virtual files mentioned above are given -r--r--r--
permissions. This is consistent with the behavior described in
function Access in internal/fusefrontend_reverse/rfs.go where all
virtual files are always readable. Behavior also observed in point
c) in #95 .

Issue #95 URL: https://github.com/rfjakob/gocryptfs/issues/95
Pull request URL: https://github.com/rfjakob/gocryptfs/pull/97
2017-03-28 22:58:03 +02:00
M. Vefa Bicakci
d48ccb3dda Report correct symbolic link dentry sizes
Prior to this commit, gocryptfs's reverse mode did not report correct
directory entry sizes for symbolic links, where the dentry size needs to
be the same as the length of a string containing the target path.

This commit corrects this issue and adds a test case to verify the
correctness of the implementation.

This issue was discovered during the use of a strict file copying program
on a reverse-mounted gocryptfs file system.
2017-03-07 20:46:58 +01:00
Jakob Unterwurzacher
445b5019e3 nametransform: fix Raw64 not affecting symlink targets
The symlink functions incorrectly hardcoded the padded
base64 variant.
2017-03-05 22:59:25 +01:00
Jakob Unterwurzacher
5b54577d2e nametransform: fix Raw64 not affecting longnames
HashLongName() incorrectly hardcoded the call to base64.URLEncoding.
2017-03-05 22:25:41 +01:00
Jakob Unterwurzacher
d0bc7970f7 full stack: implement HKDF support
...but keep it disabled by default for new filesystems.

We are still missing an example filesystem and CLI arguments
to explicitely enable and disable it.
2017-03-05 21:59:55 +01:00
Jakob Unterwurzacher
e032539e2c cryptocore: use eme v1.1 interface
Version 1.1 of the EME package (github.com/rfjakob/eme) added
a more convenient interface. Use it.

Note that you have to upgrade your EME package (go get -u)!
2017-03-05 13:58:24 +01:00
Jakob Unterwurzacher
45c1ea499e fusefrontend_reverse: handle .name files in Access()
These were currently passed to decryptPath() were it caused
a warning.
2017-02-16 21:16:42 +01:00
Jakob Unterwurzacher
c9f4400e6d Replace all calls to naked panic() with log.Panic()
We want all panics to show up in the syslog.
2016-12-10 11:54:36 +01:00
Jakob Unterwurzacher
e04dc05012 fusefrontend: upgrade wlockMap to use device AND inode number
If there are multiple filesystems backing the gocryptfs filesystems
inode numbers are not guaranteed to be unique.
2016-11-17 20:32:19 +01:00
Jakob Unterwurzacher
e7f57695a6 Fix golint warnings
$ golint ./... | grep -v underscore | grep -v ALL_CAPS
internal/fusefrontend_reverse/rfs.go:52:36: exported func NewFS returns unexported type *fusefrontend_reverse.reverseFS, which can be annoying to use
internal/nametransform/raw64_go1.5.go:10:2: exported const HaveRaw64 should have comment (or a comment on this block) or be unexported
2016-11-10 00:38:01 +01:00
Jakob Unterwurzacher
75ebb28a62 ctlsock: add initial limited implementation
At the moment, in forward mode you can only encrypt paths
and in reverse mode you can only decrypt paths.
2016-11-10 00:27:08 +01:00
Jakob Unterwurzacher
2b991c9743 Add support for unpadded base64 filenames, "-raw64"
Through base64.RawURLEncoding.

New command-line parameter "-raw64".
2016-11-01 18:43:22 +01:00
Jakob Unterwurzacher
d3b78fea95 reverse: add panics against API abuse
These should help prevent later programming errors.
2016-10-09 17:05:12 +02:00
Jakob Unterwurzacher
d25fcc6a4b reverse: gocryptfs.conf was missing from the directory listings
Fix the test for that and add checks in example_filesystems_test.
2016-10-08 22:25:08 +02:00
Jakob Unterwurzacher
e47577834b reverse: merge config translation check into isTranslatedConfig
Also get rid of useless isFiltered function.
2016-10-08 21:14:16 +02:00
Jakob Unterwurzacher
f054353bd3 reverse: make gocryptfs.conf mapping plaintextnames-aware
Only in plaintextnames-mode AND with the config file at the
default location it will be mapped into the mountpoint.

Also adds a test for that.
2016-10-08 20:57:38 +02:00
Jakob Unterwurzacher
ff48dc1aab reverse: initialize the longname cache only when reverse mode is used
Gets rid of the idling longnameCacheCleaner thread in "normal" mode.
2016-10-05 22:22:28 +02:00
Valient Gough
b764917cd5 lint fixes 2016-10-04 23:18:33 +02:00
Romain
db72a4489d fusefrontend_reverse cast Stat_t.Dev to uint64 (#44)
The [Stat_t.Dev](https://golang.org/pkg/syscall/#Stat_t) docs say `Dev` is a `unit64`, but on [macOS amd64](https://golang.org/src/syscall/ztypes_darwin_amd64.go) it's an `int32`.
2016-10-04 15:03:47 +02:00
Jakob Unterwurzacher
a2510efe12 reverse: use per-purpose nonce generation
Also pull all the deterministic nonce code into fusefrontend_reverse
to greatly simplify the normal code path.
2016-09-29 21:56:49 +02:00
Jakob Unterwurzacher
166ba74a05 tests: enable all go vet checks
...and fix reported errors:

internal/fusefrontend_reverse/rfile.go:40: github.com/rfjakob/gocryptfs/internal/contentenc.FileHeader composite literal uses unkeyed fields
internal/fusefrontend_reverse/rfs.go:249: github.com/hanwen/go-fuse/fuse.DirEntry composite literal uses unkeyed fields
internal/fusefrontend_reverse/rfs.go:264: github.com/hanwen/go-fuse/fuse.DirEntry composite literal uses unkeyed fields
2016-09-25 19:02:12 +02:00
Jakob Unterwurzacher
abd61d968d contentenc: rename constant "IVBitLen" to "DefaultIVBits" and clarify comment
128-bit IVs are NOT used everywhere.
2016-09-25 18:40:29 +02:00
Jakob Unterwurzacher
b883dd10a6 reverse: add symlink encryption and Readlink support 2016-09-25 18:01:24 +02:00
Jakob Unterwurzacher
7bbf6ad6ea reverse: derive file ID and block IVs from file paths 2016-09-25 16:43:17 +02:00
Jakob Unterwurzacher
52a6f4f71e reverse: add longnameParentCache
findLongnameParent has to read the whole directory to find the
right file; add a simple cache to avoid most directory scans.
2016-09-25 16:43:17 +02:00
Jakob Unterwurzacher
a6a7b424f8 reverse: resolve long names in Open and GetAttr
The last patch added functionality for generating gocryptfs.longname.*
files, this patch adds support for mapping them back to the full
filenames.

Note that resolving a long name needs a full readdir. A cache
will be implemented later on to improve performance.
2016-09-25 16:43:17 +02:00
Jakob Unterwurzacher
35bcc2dca2 reverse: transform long names in OpenDir 2016-09-25 16:43:17 +02:00
Jakob Unterwurzacher
d76e7aadb4 reverse: use dynamic inode numbers
...with stable mappings for hard-linked files.
2016-09-25 16:43:17 +02:00
Jakob Unterwurzacher
7f87ed78f2 cryptocore: add support for GCM-SIV 2016-09-25 16:43:17 +02:00
Jakob Unterwurzacher
d1762c5b95 reverse: fix GetAttr for gocryptfs.conf
And also don't return the encrypted version of
.gocryptfs.reverse.conf in readdir.
2016-09-25 16:43:17 +02:00
Jakob Unterwurzacher
3d59c7dd6a reverse: add gocryptfs.conf passthrough 2016-09-25 16:43:17 +02:00
Jakob Unterwurzacher
ce22ab36e1 reverse: gocryptfs.diriv content was generated from wrong path
Should be derived from the directory name only.
2016-09-25 16:43:17 +02:00
Jakob Unterwurzacher
be9dfe3a89 reverse: implement dynamic diriv
Introduce a unique per-directory diriv that is generated
by hashing the encrypted directory path.
2016-09-25 16:43:17 +02:00
Jakob Unterwurzacher
10f38e8870 reverse: generate file header for Read()
Also create virtual gocryptfs.diriv entries (no content yet).
2016-09-25 16:43:17 +02:00
Jakob Unterwurzacher
777eb8e62f reverse: rename types to reverseXYZ
...to prevent confusion with the forward variants.

FS   -> reverseFS
file -> reverseFile

Also add an incomplete read implementation.
2016-09-25 16:43:17 +02:00
Jakob Unterwurzacher
9237b4f53e reverse: add skeleton
Compiles but does not do much else.
2016-09-25 16:43:17 +02:00