The directory was already created, so return success even if Fchownat fails.
The same error handling is already used if fs.args.PlaintextNames is false.
Old XFS filesystems always return DT_UNKNOWN. Downgrade the message
to "info" level if we are on XFS.
Using the "warning" level means that users on old XFS filesystems
cannot run the test suite as it intentionally aborts on any
warnings.
Fixes https://github.com/rfjakob/gocryptfs/issues/267
When gocryptfs was started on a terminal and later
daemonized, the color codes stayed active in the syslog
output.
The codes are not visible in "journalctl -f", which is why
I have not noticed it yet, but they do show up in normal
syslog as the usual "#033[33m" crap.
Even though filesystem notifications aren't implemented for FUSE, I decided to
try my hand at implementing the autounmount feature (#128). I based it on the
EncFS autounmount code, which records filesystem accesses and checks every X
seconds whether it's idled long enough to unmount.
I've tested the feature locally, but I haven't added any tests for this flag.
I also haven't worked with Go before. So please let me know if there's
anything that should be done differently.
One particular concern: I worked from the assumption that the open files table
is unique per-filesystem. If that's not true, I'll need to add an open file
count and associated lock to the Filesystem type instead.
https://github.com/rfjakob/gocryptfs/pull/265
Error was:
# github.com/rfjakob/gocryptfs/internal/fusefrontend
internal/fusefrontend/fs.go:179: cannot use perms | 256 (type uint16) as type uint32 in argument to syscall.Fchmod
internal/fusefrontend/fs.go:185: cannot use perms (type uint16) as type uint32 in argument to syscall.Fchmod
Rename openBackingPath to openBackingDir and use OpenDirNofollow
to be safe against symlink races. Note that openBackingDir is
not used in several important code paths like Create().
But it is used in Unlink, and the performance impact in the RM benchmark
to be acceptable:
Before
$ ./benchmark.bash
Testing gocryptfs at /tmp/benchmark.bash.bYO: gocryptfs v1.6-12-g930c37e-dirty; go-fuse v20170619-49-gb11e293; 2018-09-08 go1.10.3
WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.07979 s, 243 MB/s
READ: 262144000 bytes (262 MB, 250 MiB) copied, 0.882413 s, 297 MB/s
UNTAR: 16.703
MD5: 7.606
LS: 1.349
RM: 3.237
After
$ ./benchmark.bash
Testing gocryptfs at /tmp/benchmark.bash.jK3: gocryptfs v1.6-13-g84d6faf-dirty; go-fuse v20170619-49-gb11e293; 2018-09-08 go1.10.3
WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.06261 s, 247 MB/s
READ: 262144000 bytes (262 MB, 250 MiB) copied, 0.947228 s, 277 MB/s
UNTAR: 17.197
MD5: 7.540
LS: 1.364
RM: 3.410
The function used to do two things:
1) Walk the directory tree in a manner safe from symlink attacks
2) Open the final component in the mode requested by the caller
This change drops (2), which was only used once, and lets the caller
handle it. This simplifies the function and makes it fit for reuse in
forward mode in openBackingPath(), and for using O_PATH on Linux.
These were silently ignored until now (!) but
are rejected by Go 1.11 stdlib.
Drop the flags so the tests work again, until
we figure out a better solution.
https://github.com/golang/go/issues/20130
Show enable_trezor in the version string if we were compiled
with `-tags enable_trezor`. And hide the `-trezor` flag from
the help output if we were not.
As uncovered by xfstests generic/465, concurrent reads and writes
could lead to this,
doRead 3015532: corrupt block #1039: stupidgcm: message authentication failed,
as the read could pick up a block that has not yet been completely written -
write() is not atomic!
Now writes take ContentLock exclusively, while reads take it shared,
meaning that multiple reads can run in parallel with each other, but
not with a write.
This also simplifies the file header locking.
xfstests generic/083 fills the filesystem almost completely while
running fsstress in parallel. In fsck, these would show up:
readFileID 2580: incomplete file, got 18 instead of 19 bytes
This could happen when writing the file header works, but writing
the actual data fails.
Now we kill the header again by truncating the file to zero.
If the underlying filesystem is full, writing to gocryptfs.diriv may
fail, and later fsck show this:
OpenDir "xyz": could not read gocryptfs.diriv: wanted 16 bytes, got 0
Uncovered by xfstests generic/083.
Also fixes a fd leak in the error path.
If the underlying filesystem is full, it is normal get ENOSPC here.
Log at Info level instead of Warning.
Fixes xfstests generic/015 and generic/027, which complained about
the extra output.
O_DIRECT accesses must be aligned in both offset and length. Due to our
crypto header, alignment will be off, even if userspace makes aligned
accesses. Running xfstests generic/013 on ext4 used to trigger lots of
EINVAL errors due to missing alignment. Just fall back to buffered IO.
The trezor libraries are not yet stable enough to build
gocryptfs with trezor support by default.
It does not even compile at the moment:
$ ./build.bash -tags enable_trezor
# github.com/conejoninja/tesoro/vendor/github.com/trezor/usbhid
../../conejoninja/tesoro/vendor/github.com/trezor/usbhid/hid.go:32:11: fatal error: os/threads_posix.c: No such file or directory
#include "os/threads_posix.c"
^~~~~~~~~~~~~~~~~~~~
compilation terminated.
https://github.com/conejoninja/tesoro/issues/9
"gocryptfs -fsck" will need access to helper functions,
and to get that, it will need to cast a gofuse.File to a
fusefrontend.File. Make fusefrontend.File exported to make
this work.
Sebastian Lackner