20 KiB

Raw Blame History

% GOCRYPTFS(1) % github.com/rfjakob % Aug 2017

NAME

gocryptfs - create or mount an encrypted filesystem

SYNOPSIS

Initialize new encrypted filesystem

gocryptfs -init [OPTIONS] CIPHERDIR

Mount

gocryptfs [OPTIONS] CIPHERDIR MOUNTPOINT [-o COMMA-SEPARATED-OPTIONS]

Unmount

fusermount -u MOUNTPOINT

Change password

gocryptfs -passwd [OPTIONS] CIPHERDIR

Check consistency

gocryptfs -fsck [OPTIONS] CIPHERDIR

DESCRIPTION

gocryptfs is an encrypted overlay filesystem written in Go. Encrypted files are stored in CIPHERDIR, and a plain-text view can be presented by mounting the filesystem at MOUNTPOINT.

gocryptfs was inspired by encfs(1) and strives to fix its security issues while providing good performance.

OPTIONS

Available options are listed below. Usually, you don't need any. Defaults are fine.

-aessiv

Use the AES-SIV encryption mode. This is slower than GCM but is secure with deterministic nonces as used in "-reverse" mode.

-allow_other

By default, the Linux kernel prevents any other user (even root) to access a mounted FUSE filesystem. Settings this option allows access for other users, subject to file permission checking. Only works if user_allow_other is set in /etc/fuse.conf. This option is equivalent to "allow_other" plus "default_permissions" described in fuse(8).

-config string

Use specified config file instead of CIPHERDIR/gocryptfs.conf.

-cpuprofile string

Write cpu profile to specified file.

-ctlsock string

Create a control socket at the specified location. The socket can be used to decrypt and encrypt paths inside the filesystem. When using this option, make sure that the directory you place the socket in is not world-accessible. For example, /run/user/UID/my.socket would be suitable.

-d, -debug

Enable debug output.

-dev, -nodev

Enable (-dev) or disable (-nodev) device files in a gocryptfs mount (default: -nodev). If both are specified, -nodev takes precedence. You need root permissions to use -dev.

-devrandom

Use /dev/random for generating the master key instead of the default Go implementation. This is especially useful on embedded systems with Go versions prior to 1.9, which fall back to weak random data when the getrandom syscall is blocking. Using this option can block indefinitely when the kernel cannot harvest enough entropy.

-e PATH, -exclude PATH

Only for reverse mode: exclude relative plaintext path from the encrypted view, matching only from root of mounted filesystem. Can be passed multiple times. Example:

gocryptfs -reverse -exclude Music -exclude Movies /home/user /mnt/user.encrypted

See also -exclude-wildcard, -exclude-from and the EXCLUDING FILES section.

-ew PATH, -exclude-wildcard PATH

Only for reverse mode: exclude paths from the encrypted view, matching anywhere. Wildcards supported. Can be passed multiple times. Example:

gocryptfs -reverse -exclude-wildcard '*~' /home/user /mnt/user.encrypted

See also -exclude, -exclude-from and the EXCLUDING FILES section.

-exclude-from FILE

Only for reverse mode: reads exclusion patters (using -exclude-wildcard syntax) from a file. Can be passed multiple times. Example:

gocryptfs -reverse -exclude-from ~/crypt-exclusions /home/user /mnt/user.encrypted

See also -exclude, -exclude-wildcard and the EXCLUDING FILES section.

-exec, -noexec

Enable (-exec) or disable (-noexec) executables in a gocryptfs mount (default: -exec). If both are specified, -noexec takes precedence.

-extpass CMD [-extpass ARG1 ...]

Use an external program (like ssh-askpass) for the password prompt. The program should return the password on stdout, a trailing newline is stripped by gocryptfs. If you just want to read from a password file, see -passfile.

When -extpass is specified once, the string argument will be split on spaces. For example, -extpass "md5sum my password.txt" will be executed as "md5sum" "my" "password.txt", which is NOT what you want.

Specify -extpass twice or more to use the string arguments as-is. For example, you DO want to call md5sum like this: -extpass "md5sum" -extpass "my password.txt".

If you want to prevent splitting on spaces but don't want to pass arguments to your program, use "--", which is accepted by most programs: -extpass "my program" -extpass "--"

-fg, -f

Stay in the foreground instead of forking away. Implies "-nosyslog". For compatibility, "-f" is also accepted, but "-fg" is preferred.

-force_owner string

If given a string of the form "uid:gid" (where both "uid" and "gid" are substituted with positive integers), presents all files as owned by the given uid and gid, regardless of their actual ownership. Implies "allow_other".

This is rarely desired behavior: One should usually run gocryptfs as the account which owns the backing-store files, which should usually be one and the same with the account intended to access the decrypted content. An example of a case where this may be useful is a situation where content is stored on a filesystem that doesn't properly support UNIX ownership and permissions.

-forcedecode

Force decode of encrypted files even if the integrity check fails, instead of failing with an IO error. Warning messages are still printed to syslog if corrupted files are encountered. It can be useful to recover files from disks with bad sectors or other corrupted media. It shall not be used if the origin of corruption is unknown, specially if you want to run executable files.

For corrupted media, note that you probably want to use dd_rescue(1) instead, which will recover all but the corrupted 4kB block.

This option makes no sense in reverse mode. It requires gocryptfs to be compiled with openssl support and implies -openssl true. Because of this, it is not compatible with -aessiv, that uses built-in Go crypto.

Setting this option forces the filesystem to read-only and noexec.

-fsck

Check CIPHERDIR for consistency. If corruption is found, the exit code is 26.

-fsname string

Override the filesystem name (first column in df -T). Can also be passed as "-o fsname=" and is equivalent to libfuse's option of the same name. By default, CIPHERDIR is used.

-fusedebug

Enable fuse library debug output.

-h, -help

Print a short help text that shows the more-often used options.

-hh

Long help text, shows all available options.

-hkdf

Use HKDF to derive separate keys for content and name encryption from the master key.

-i duration, -idle duration

Only for forward mode: automatically unmount the filesystem if it has been idle for the specified duration. Durations can be specified like "500s" or "2h45m". 0 (the default) means stay mounted indefinitely.

-info

Pretty-print the contents of the config file for human consumption, stripping out sensitive data.

-init

Initialize encrypted directory.

-ko

Pass additional mount options to the kernel (comma-separated list). FUSE filesystems are mounted with "nodev,nosuid" by default. If gocryptfs runs as root, you can enable device files by passing the opposite mount option, "dev", and if you want to enable suid-binaries, pass "suid". "ro" (equivalent to passing the "-ro" option) and "noexec" may also be interesting. For a complete list see the section FILESYSTEM-INDEPENDENT MOUNT OPTIONS in mount(8). On MacOS, "local", "noapplexattr", "noappledouble" may be interesting.

Note that unlike "-o", "-ko" is a regular option and must be passed BEFORE the directories. Example:

gocryptfs -ko noexec /tmp/foo /tmp/bar

-longnames

Store names longer than 176 bytes in extra files (default true) This flag is useful when recovering old gocryptfs filesystems using "-masterkey". It is ignored (stays at the default) otherwise.

-masterkey string

Use a explicit master key specified on the command line or, if the special value "stdin" is used, read the masterkey from stdin. This option can be used to mount a gocryptfs filesystem without a config file. Note that the command line, and with it the master key, is visible to anybody on the machine who can execute "ps -auxwww". Use "-masterkey=stdin" to avoid that risk.

The masterkey option is meant as a recovery option for emergencies, such as if you have forgotten the password or lost the config file.

Even if a config file exists, it will not be used. All non-standard settings have to be passed on the command line: -aessiv when you mount a filesystem that was created using reverse mode, or -plaintextnames for a filesystem that was created with that option.

Examples:

-masterkey=6f717d8b-6b5f8e8a-fd0aa206-778ec093-62c5669b-abd229cd-241e00cd-b4d6713d
-masterkey=stdin

-memprofile string

Write memory profile to the specified file. This is useful when debugging memory usage of gocryptfs.

-nodev

See -dev, -nodev.

-noexec

See -exec, -noexec.

-nofail

Having the nofail option in /etc/fstab instructs systemd to continue booting normally even if the mount fails (see man systemd.fstab).

The option is ignored by gocryptfs itself and has no effect outside /etc/fstab.

-nonempty

Allow mounting over non-empty directories. FUSE by default disallows this to prevent accidental shadowing of files.

-noprealloc

Disable preallocation before writing. By default, gocryptfs preallocates the space the next write will take using fallocate(2) in mode FALLOC_FL_KEEP_SIZE. The preallocation makes sure it cannot run out of space in the middle of the write, which would cause the last 4kB block to be corrupt and unreadable.

On ext4, preallocation is fast and does not cause a noticeable performance hit. Unfortunately, on Btrfs, preallocation is very slow, especially on rotational HDDs. The "-noprealloc" option gives users the choice to trade robustness against out-of-space errors for a massive speedup.

For benchmarks and more details of the issue see https://github.com/rfjakob/gocryptfs/issues/63 .

-nosyslog

Diagnostic messages are normally redirected to syslog once gocryptfs daemonizes. This option disables the redirection and messages will continue be printed to stdout and stderr.

-nosuid

See -suid, -nosuid.

-notifypid int

Send USR1 to the specified process after successful mount. This is used internally for daemonization.

-o COMMA-SEPARATED-OPTIONS

For compatibility with mount(1), options are also accepted as "-o COMMA-SEPARATED-OPTIONS" at the end of the command line. For example, "-o q,zerokey" is equivalent to passing "-q -zerokey".

Note that you can only use options that are understood by gocryptfs with "-o". If you want to pass special flags to the kernel, you should use "-ko" (kernel option). This is different in libfuse-based filesystems, that automatically pass any "-o" options they do not understand along to the kernel.

Example:

gocryptfs /tmp/foo /tmp/bar -o q,zerokey

-openssl bool/"auto"

Use OpenSSL instead of built-in Go crypto (default "auto"). Using built-in crypto is 4x slower unless your CPU has AES instructions and you are using Go 1.6+. In mode "auto", gocrypts chooses the faster option.

-passfile FILE [-passfile FILE2 ...]

Read password from the specified plain text file. The file should contain exactly one line (do not use binary files!). A warning will be printed if there is more than one line, and only the first line will be used. A single trailing newline is allowed and does not cause a warning.

Pass this option multiple times to read the first line from multiple files. They are concatenated for the effective password.

Example:

echo hello > hello.txt
echo word > world.txt
gocryptfs -passfile hello.txt -passfile world.txt

The effective password will be "helloworld".

-passwd

Change the password. Will ask for the old password, check if it is correct, and ask for a new one.

This can be used together with -masterkey if you forgot the password but know the master key. Note that without the old password, gocryptfs cannot tell if the master key is correct and will overwrite the old one without mercy. It will, however, create a backup copy of the old config file as gocryptfs.conf.bak. Delete it after you have verified that you can access your files with the new password.

-plaintextnames

Do not encrypt file names and symlink targets.

-q, -quiet

Quiet - silence informational messages.

-raw64

Use unpadded base64 encoding for file names. This gets rid of the trailing "\=\=". A filesystem created with this option can only be mounted using gocryptfs v1.2 and higher.

-reverse

Reverse mode shows a read-only encrypted view of a plaintext directory. Implies "-aessiv".

-rw, -ro

Mount the filesystem read-write (-rw, default) or read-only (-ro). If both are specified, -ro takes precedence.

-scryptn int

scrypt cost parameter expressed as scryptn=log2(N). Possible values are 10 to 28, representing N=2^10 to N=2^28.

Setting this to a lower value speeds up mounting and reduces its memory needs, but makes the password susceptible to brute-force attacks. The default is 16.

-serialize_reads

The kernel usually submits multiple concurrent reads to service userspace requests and kernel readahead. gocryptfs serves them concurrently and in arbitrary order. On backing storage that performs poorly for concurrent or out-of-order reads (like Amazon Cloud Drive), this behavior can cause very slow read speeds.

The -serialize_reads option does two things: (1) reads will be submitted one-by-one (no concurrency) and (2) gocryptfs tries to order the reads by file offset order.

The ordering requires gocryptfs to wait a certain time before submitting a read. The serialization introduces extra locking. These factors will limit throughput to below 70MB/s.

For more details visit https://github.com/rfjakob/gocryptfs/issues/92 .

-sharedstorage

Enable work-arounds so gocryptfs works better when the backing storage directory is concurrently accessed by multiple gocryptfs instances.

At the moment, it does two things:

Disable stat() caching so changes to the backing storage show up immediately.
Disable hard link tracking, as the inode numbers on the backing storage are not stable when files are deleted and re-created behind our back. This would otherwise produce strange "file does not exist" and other errors.

When "-sharedstorage" is active, performance is reduced and hard links cannot be created.

Even with this flag set, you may hit occasional problems. Running gocryptfs on shared storage does not receive as much testing as the usual (exclusive) use-case. Please test your workload in advance and report any problems you may hit.

More info: https://github.com/rfjakob/gocryptfs/issues/156

-speed

Run crypto speed test. Benchmark Go's built-in GCM against OpenSSL (if available). The library that will be selected on "-openssl=auto" (the default) is marked as such.

-suid, -nosuid

Enable (-suid) or disable (-nosuid) suid and sgid executables in a gocryptfs mount (default: -nosuid). If both are specified, -nosuid takes precedence. You need root permissions to use -suid.

-trace string

Write execution trace to file. View the trace using "go tool trace FILE".

-version

Print version and exit. The output contains three fields separated by ";". Example: "gocryptfs v1.1.1-5-g75b776c; go-fuse 6b801d3; 2016-11-01 go1.7.3". Field 1 is the gocryptfs version, field 2 is the version of the go-fuse library, field 3 is the compile date and the Go version that was used.

-wpanic

When encountering a warning, panic and exit immediately. This is useful in regression testing.

-zerokey

Use all-zero dummy master key. This options is only intended for automated testing as it does not provide any security.

--

Stop option parsing. Helpful when CIPHERDIR may start with a dash "-".

EXCLUDING FILES

In reverse mode, it is possible to exclude files from the encrypted view, using the -exclude, -exclude-wildcard and -exclude-from options.

-exclude matches complete paths, so -exclude file.txt only excludes a file named file.txt in the root of the mounted filesystem; files named file.txt in subdirectories are still visible. (This option is kept for compatibility with the behavior up to version 1.6.x)

-exclude-wildcard matches files anywhere, so -exclude-wildcard file.txt excludes files named file.txt in any directory. If you want to match complete paths, you can prefix the filename with a /: -exclude-wildcard /file.txt excludes only file.txt in the root of the mounted filesystem.

If there are many exclusions, you can use -exclude-from to read exclusion patterns from a file. The syntax is that of -exclude-wildcard, so use a leading / to match complete paths.

The rules for exclusion are that of gitignore. In short:

A blank line matches no files, so it can serve as a separator for readability.
A line starting with # serves as a comment. Put a backslash (\) in front of the first hash for patterns that begin with a hash.
Trailing spaces are ignored unless they are quoted with backslash (\).
An optional prefix ! negates the pattern; any matching file excluded by a previous pattern will become included again. It is not possible to re-include a file if a parent directory of that file is excluded. Put a backslash (\) in front of the first ! for patterns that begin with a literal !, for example, \!important!.txt.
If the pattern ends with a slash, it is removed for the purpose of the following description, but it would only find a match with a directory. In other words, foo/ will match a directory foo and paths underneath it, but will not match a regular file or a symbolic link foo.
If the pattern does not contain a slash /, it is treated as a shell glob pattern and checked for a match against the pathname relative to the root of the mounted filesystem.
Otherwise, the pattern is treated as a shell glob suitable for consumption by fnmatch(3) with the FNM_PATHNAME flag: wildcards in the pattern will not match a / in the pathname. For example, Documentation/*.html matches Documentation/git.html but not Documentation/ppc/ppc.html or tools/perf/Documentation/perf.html.
A leading slash matches the beginning of the pathname. For example, /*.c matches cat-file.c but not mozilla-sha1/sha1.c.
Two consecutive asterisks (**) in patterns matched against full pathname may have special meaning: i. A leading ** followed by a slash means match in all directories. For example, **/foo matches file or directory foo anywhere, the same as pattern foo. **/foo/bar matches file or directory bar anywhere that is directly under directory foo. ii. A trailing /** matches everything inside. For example, abc/** matches all files inside directory abc, with infinite depth. iii. A slash followed by two consecutive asterisks then a slash matches zero or more directories. For example, a/**/b matches a/b, a/x/b, a/x/y/b and so on. iv. Other consecutive asterisks are considered invalid.

EXAMPLES

Create an encrypted filesystem in directory "mydir.crypt", mount it on "mydir":

mkdir mydir.crypt mydir
gocryptfs -init mydir.crypt
gocryptfs mydir.crypt mydir

Mount an encrypted view of joe's home directory using reverse mode:

mkdir /home/joe.crypt
gocryptfs -init -reverse /home/joe
gocryptfs -reverse /home/joe /home/joe.crypt

EXIT CODES

0: success
6: CIPHERDIR is not an empty directory (on "-init")
10: MOUNTPOINT is not an empty directory
12: password incorrect
22: password is empty (on "-init")
23: could not read gocryptfs.conf
24: could not write gocryptfs.conf (on "-init" or "-password")
26: fsck found errors
other: please check the error message

20 KiB Raw Blame History