1
0
mirror of https://gitlab.os-k.eu/os-k-team/os-k.git synced 2023-08-25 14:03:10 +02:00

libbuf stuff & bugs

This commit is contained in:
Julian Barathieu 2019-04-23 11:32:45 +02:00
parent 66a4db7610
commit 1211dc7b2e
13 changed files with 265 additions and 93 deletions

View File

@ -85,7 +85,7 @@ LibCSources = libc/atoi.c libc/itoa.c \
KernObj=$(patsubst %.c,$(KOBJDIR)/%.o,$(KernSources))
# Kernel sources
KernSources = libbuf/buf.c libbuf/bput.c \
KernSources = libbuf/buf.c libbuf/bputc.c libbuf/bscroll.c \
libbuf/bprint.c kernel/cpu/cpuid.c \
kernel/cpu/idt.c kernel/init/init.c \
kernel/init/table.c kernel/io/cursor.c \

View File

@ -78,6 +78,9 @@
// Alignment error
#define EALIGN 257
// End of file/stream
#define EENDF 258
//------------------------------------------//
#endif

View File

@ -34,10 +34,15 @@
//
enum
{
BF_LINE = 1, // Line-buffered
BF_FILE = 2, // Linked to a file
BF_ALLOC = 4, // Buffer was malloc'd
BF_FONCLOSE = 8, // Don't flush on close
BF_LINE = 1, // Line-buffered
BF_FILE = 1<<1, // Linked to a file
BF_BALLOC = 1<<2, // Buffer structure was malloc'd
BF_SALLOC = 1<<3, // Internal buffer was malloc'd
BF_FONCLOSE = 1<<4, // Flush on close
BF_AUTOSCROLL = 1<<5, // Scroll-down automatically
BF_EOF = 1<<6, // End of file reached
BF_ERR = 1<<7, // An error happened
};
//
@ -46,8 +51,6 @@ enum
enum
{
BS_CLOSED = 0, // Buffer closed (need allocation)
BS_EOF, // Buffer closed, or end of file reached
BS_ERR, // Buffer not ready, an error happened
// Buffer ready for...
BS_RDWR, // Both reading and writing
@ -56,6 +59,19 @@ enum
};
typedef struct Buffer_t Buffer_t;
//
// For line buffers, the flusher by bputc() is called every '\n'
// For pure buffers, the flusher is called by bputc() after it fills
// the buffer (unless flush-on-close is enabled)
//
// When a buffer is full, if the flusher doesn'tchange buf->wp and bputc()
// is called again, it will produce a EENDF error and set the BF_EOF flag
//
// Unless line buffering with auto-scrolldown enabled, nothing is
// removed from the buffer by the libbuf functions themselves, if you want
// the buffer to be emptied on flush then do that in the flusher
//
typedef error_t (*BFlusher_t)(Buffer_t *);
struct Buffer_t
@ -72,7 +88,7 @@ struct Buffer_t
uchar *rp; // Read pointer
uchar *wp; // Write pointer
BFlusher_t flusher; // Called for flushing
BFlusher_t flusher; // See above
// The following parameters are only used in line buf mode
@ -84,16 +100,34 @@ struct Buffer_t
extern Buffer_t *BStdOut, *BStdDbg;
error_t BCloseBuf(Buffer_t *buf);
void BFlushOnClose(Buffer_t *buf);
error_t BCloseBuf(Buffer_t *);
void BFlushOnClose(Buffer_t *);
Buffer_t *BOpenPureBuf(char *source, size_t size);
void BEnableAutoScroll(Buffer_t *);
void BDisableAutoScroll(Buffer_t *);
//
// Buffer creation functions
//
// 'source' is the internal buffer, if you want
// to give it yourself
//
// If *pbuf==NULL, malloc's the structure
// If source==NULL, malloc's the buffer
// BCloseBuf() handles the de-allocations
//
// Creates a pure buffer of a given size
error_t BOpenPureBuf(Buffer_t **pbuf, int mode, size_t size);
error_t BOpenPureBufEx(Buffer_t **, char *source, int mode, size_t,
BFlusher_t);
// Creates a lined buffer of pbCount*nLines lines each
// of lineLen length (pb = playback buffer, for scrolling up)
// If source==NULL, malloc the buffer
Buffer_t *BOpenLineBuf(char *source, int mode, int lineLen,
int nLines, int pbCount, BFlusher_t flusher);
error_t BOpenLineBuf(Buffer_t **pbuf, int mode,
int lineLen, int nLines, int pbCount);
error_t BOpenLineBufEx(Buffer_t **pbuf, char *source, int mode,
int lineLen, int nLines, int pbCount, BFlusher_t);
int BGetFlags(Buffer_t *);
int BGetState(Buffer_t *);
@ -105,6 +139,7 @@ void BUnlockBuf(Buffer_t *);
bool BTrylockBuf(Buffer_t *);
error_t BFlushBuf(Buffer_t *);
error_t BScrollDownBuf(Buffer_t *);
error_t BPutOnBuf(Buffer_t *, uchar);
error_t BPrintOnBuf(Buffer_t *, const char *fmt, ...);
error_t BPrintOnBufV(Buffer_t *, const char *fmt, va_list);
@ -112,5 +147,6 @@ error_t BPrintOnBufV(Buffer_t *, const char *fmt, va_list);
error_t bputc(Buffer_t *buf, uchar ch);
error_t bprintf(Buffer_t *buf, const char *fmt, ...);
error_t vbprintf(Buffer_t *buf, const char *fmt, va_list ap);
error_t bscrolldown(Buffer_t *buf);
#endif

View File

@ -131,5 +131,16 @@ noreturn void KeStartPanic(const char *, ...);
//------------------------------------------//
#define XBUG(c) do { \
volatile ushort *_vga \
=(volatile ushort*)0xB8000; \
while(_vga<(volatile ushort*)(0xB8000+(80*25*2)) ) \
*_vga++=(c|(0xf<<8)); \
asm volatile("cli\nhlt"); \
}while(0)
#define BUG() XBUG('B')
#define BUGON(x) if(x)BUG()
//------------------------------------------//
#endif

View File

@ -63,7 +63,9 @@ noreturn void BtStartKern(multiboot_info_t *mbInfo, uint mbMagic)
MmInitMemoryMap();
MmInitHeap();
PsInitSched();
int i=1;
for(;i<=25;i++)BUGON(KernLog("%4d%4d%4d%4d%4d%4d%4d%4d%4d%4d%4d%4d%4d%4d%4d%4d%4d%4d%4d%3d\n",i,i,i,i,i,i,i,i,i,i,i,i,i,i,i,i,i,i,i,i));
KernLog("Cursor test:");
// End this machine's suffering

View File

@ -49,7 +49,7 @@ error_t bvgaflusher(Buffer_t *buf)
uchar *currentLine = buf->wp - buf->lineLen - buf->lastLF;
uchar *bufStart = (uchar *)lmax((size_t)buf->buf,
(size_t)currentLine
- (buf->nLines - 1) * buf->lineLen);
- (buf->nLines - 2) * buf->lineLen);
uchar *ptr = bufStart;
@ -76,7 +76,6 @@ error_t bvgaflusher(Buffer_t *buf)
const ushort filler = VGA_ComputeEntry(' ', color);
while (fbp < fbe) *fbp++ = filler;
}
return EOK;
}
@ -86,12 +85,18 @@ error_t bvgaflusher(Buffer_t *buf)
//
error_t IoInitVGABuffer(void)
{
static char bvgabuffer[1 * MB];
static char bvgabufsrc[1 * MB];
static Buffer_t bvgabufstruct;
BStdOut = &bvgabufstruct;
BStdOut = BOpenLineBuf(bvgabuffer, BS_WRONLY,
BOpenLineBufEx(&BStdOut,
bvgabufsrc, BS_WRONLY,
BtVideoInfo.framebufferWidth,
BtVideoInfo.framebufferHeight,
8, bvgaflusher);
1, bvgaflusher);
BEnableAutoScroll(BStdOut);
BStdDbg = BStdOut;

View File

@ -77,6 +77,8 @@ noreturn void KeStartPanic(const char *fmt, ...)
vbprintf(BStdOut, fmt, ap);
va_end(ap);
bputc(BStdOut, '\n');
BStdOut->flusher(BStdOut);
KeHaltCPU();

View File

@ -28,6 +28,7 @@
GdtEntry_t gdtEntries[5];
GdtPtr_t gdtPtr;
#if 0
static void SetGdtEntry(int index, uint base, uint limit, uchar access,
uchar granularity)
{
@ -41,7 +42,7 @@ static void SetGdtEntry(int index, uint base, uint limit, uchar access,
gdtEntries[index].granularity |= granularity & 0xF0;
gdtEntries[index].access = access;
}
#endif
void MmInitGdt(void)

View File

@ -134,6 +134,7 @@ error_t vbprintf(Buffer_t *buf, const char *fmt, va_list ap)
assert(buf && buf->initDone == INITOK);
if (!buf || !fmt) return EINVAL;
if (buf->flags & (BF_EOF|BF_ERR)) return EENDF;
if (buf->state != BS_RDWR && buf->state != BS_WRONLY) {
return EBADF;
}

View File

@ -34,6 +34,7 @@ error_t BPutOnBuf(Buffer_t *buf, uchar ch)
assert(buf && buf->initDone == INITOK);
if (!buf) return EINVAL;
if (buf->flags & (BF_EOF|BF_ERR)) return EENDF;
if (buf->state != BS_RDWR && buf->state != BS_WRONLY) {
return EBADF;
}
@ -50,7 +51,6 @@ error_t BPutOnBuf(Buffer_t *buf, uchar ch)
error_t bputc(Buffer_t *buf, uchar ch)
{
error_t rc = EOK;
size_t bufSize, pbCount;
// Implements playback / scrolling up when line buffering
// Note that '\n', '\r' and '\t' can never occur in the buffer
@ -62,11 +62,6 @@ error_t bputc(Buffer_t *buf, uchar ch)
if (ch == '\n') {
assert(buf->lastLF < buf->lineLen);
// Make sure double \n's have effect
//if (buf->lastLF == 0) {
// buf->lastLF = buf->lineLen;
//}
int off = buf->lineLen - buf->lastLF;
while (off > 0) {
*buf->wp++ = ' ';
@ -74,7 +69,13 @@ error_t bputc(Buffer_t *buf, uchar ch)
}
buf->lastLF = 0;
if (buf->flusher) buf->flusher(buf);
// Auto-scrolling
if (buf->wp == buf->buf + buf->size && buf->flags&BF_AUTOSCROLL) {
bscrolldown(buf);
}
if (buf->flusher) buf->flusher(buf);
}
// Deal with carriage returns
@ -97,32 +98,9 @@ error_t bputc(Buffer_t *buf, uchar ch)
// Just a regular character
else {
// Do we have to scroll up?
if (buf->wp == buf->buf + buf->size) {
// Yes, so we give up a whole playback buffer worth
// of lines so we don't have to do this too often
// (basically we make the current buffer a pb one)
bufSize = buf->nLines * buf->lineLen;
pbCount = (buf->size / bufSize) - 1;
// Paranoia check
assert(buf->size >= (size_t)(buf->nLines * buf->lineLen));
// If we only have one playback buffer we just give up a line
if (pbCount == 0) {
// Use of memcpy() is safe because the source occur
// after the destination
memcpy(buf->buf, buf->buf + buf->lineLen,
buf->size - buf->lineLen);
buf->wp -= buf->lineLen;
}
// We do have a playback buffer worth of lines to give up
else {
memcpy(buf->buf, buf->buf + bufSize,
buf->size - bufSize);
buf->wp -= bufSize;
}
buf->flags |= BF_EOF;
return EENDF;
}
// Write it
@ -132,18 +110,28 @@ error_t bputc(Buffer_t *buf, uchar ch)
if (++buf->lastLF == buf->lineLen) {
buf->lastLF = 0;
}
}
return EOK;
// Auto-scrolling
if (buf->wp == buf->buf + buf->size && buf->flags&BF_AUTOSCROLL) {
bscrolldown(buf);
}
}
}
// No scrolling up when not line-buffering
// Not line-buffering
else {
if (buf->wp == buf->buf + buf->size) {
buf->state = BS_EOF;
buf->flags |= BF_EOF;
return EENDF;
}
return ENOSYS;
*buf->wp++ = ch;
if (buf->wp == buf->buf + buf->size && !(buf->flags&BF_FONCLOSE)) {
buf->flusher(buf);
}
}
return EOK;
}

81
kaleid/libbuf/bscroll.c Normal file
View File

@ -0,0 +1,81 @@
//----------------------------------------------------------------------------//
// GNU GPL OS/K //
// //
// Desc: Buffer library //
// //
// //
// Copyright © 2018-2019 The OS/K Team //
// //
// This file is part of OS/K. //
// //
// OS/K is free software: you can redistribute it and/or modify //
// it under the terms of the GNU General Public License as published by //
// the Free Software Foundation, either version 3 of the License, or //
// any later version. //
// //
// OS/K is distributed in the hope that it will be useful, //
// but WITHOUT ANY WARRANTY//without even the implied warranty of //
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the //
// GNU General Public License for more details. //
// //
// You should have received a copy of the GNU General Public License //
// along with OS/K. If not, see <https://www.gnu.org/licenses/>. //
//----------------------------------------------------------------------------//
#include <extras/buf.h>
#include <extras/locks.h>
void BEnableAutoScroll(Buffer_t *buf) { buf->flags |= BF_AUTOSCROLL; }
void BDisableAutoScroll(Buffer_t *buf) { buf->flags &= ~BF_AUTOSCROLL; }
error_t BScrollDownBuf(Buffer_t *buf)
{
error_t rc;
assert(buf && buf->initDone == INITOK);
if (!buf) return EINVAL;
if (buf->flags & (BF_EOF|BF_ERR)) return EENDF;
if (buf->state != BS_RDWR && buf->state != BS_WRONLY) {
return EBADF;
}
ExAcquireLock(&buf->lock);
rc = bscrolldown(buf);
ExReleaseLock(&buf->lock);
return rc;
}
error_t bscrolldown(Buffer_t *buf)
{
size_t bufSize, pbCount;
assert(buf->wp == buf->buf + buf->size);
// We give up a whole playback buffer worth
// of lines so we don't have to do this too often
// (we make the current buffer a pb one)
bufSize = buf->nLines * buf->lineLen;
pbCount = (buf->size / bufSize) - 1;
// Paranoia check
assert(buf->size >= (size_t)(buf->nLines * buf->lineLen));
// If we only have one playback buffer we just give up a line
if (pbCount == 0) {
// Use of memcpy() is safe because the source occur
// after the destination
memmove(buf->buf, buf->buf + buf->lineLen,
buf->size - buf->lineLen);
buf->wp -= buf->lineLen;
}
// We do have a playback buffer worth of lines to give up
else {
memmove(buf->buf, buf->buf + bufSize,
buf->size - bufSize);
buf->wp -= bufSize;
}
return EOK;
}

View File

@ -57,7 +57,7 @@ error_t BCloseBuf(Buffer_t *buf)
BFlushBuf(buf);
}
if (buf->flags & BF_ALLOC) {
if (buf->flags & BF_SALLOC && buf->buf) {
KalFreeMemory(buf->buf);
}
@ -65,53 +65,49 @@ error_t BCloseBuf(Buffer_t *buf)
buf->initDone = buf->flags = buf->state = buf->size = 0;
ExReleaseLock(&buf->lock);
KalFreeMemory(buf);
if (buf->flags & BF_BALLOC) {
KalFreeMemory(buf);
}
return EOK;
}
//
// Opens a pure text buffer (for WRITING only)
// If source==NULL, malloc's the internal buffer
// Creates an actual buffer
//
#if 0
Buffer_t *BOpenPureBuf(char *source, size_t size)
error_t BOpenPureBuf(Buffer_t **pbuf, int mode, size_t size)
{
/*Buffer_t *buf = malloc(sizeof *buf);
buf->flags = 0;
ExInitLock(&buf->lock);*/
return NULL;
return BOpenPureBufEx(pbuf, NULL, mode, size, NULL);
}
#endif
//
// Creates a lined buffer of (nLines + pbCount*nLines) lines each
// of lineLen length (pb = playback buffer, for scrolling up)
//
Buffer_t *BOpenLineBuf(char *source, int mode,
int lineLen, int nLines, int pbCount, BFlusher_t flusher)
error_t BOpenPureBufEx(Buffer_t **pbuf, char *source, int mode, size_t size,
BFlusher_t flusher)
{
assert(lineLen > 0 && nLines > 0 && pbCount >= 0);
Buffer_t *buf;
assert(mode == BS_RDWR || mode == BS_RDONLY || mode == BS_WRONLY);
//Buffer_t *buf = malloc(sizeof *buf);
static Buffer_t __buf;
Buffer_t *buf = &__buf;
if (!pbuf) return EINVAL;
if (!*pbuf) {
buf = malloc(sizeof *buf);
if (!buf) return ENOMEM;
buf->flags |= BF_BALLOC;
}
else {
buf = *pbuf;
buf->flags = 0;
}
ExInitLock(&buf->lock, KLOCK_MUTEX);
ExAcquireLock(&buf->lock);
buf->lastLF = 0;
buf->size = size;
buf->state = mode;
buf->flags = BF_LINE;
buf->nLines = nLines;
buf->lineLen = lineLen;
buf->size = lineLen * nLines * (pbCount + 1);
if (source == NULL) {
KalAllocMemoryEx((void **)&buf->buf, buf->size, M_ZEROED, 0);
buf->flags |= BF_SALLOC;
} else {
buf->buf = (uchar *)source;
}
@ -121,7 +117,45 @@ Buffer_t *BOpenLineBuf(char *source, int mode,
buf->initDone = INITOK;
ExReleaseLock(&buf->lock);
return buf;
// Second allocation failed
if (buf->buf == NULL) {
BCloseBuf(buf);
return ENOMEM;
}
*pbuf = buf;
return EOK;
}
//
// Creates a line buffer of (nLines + pbCount*nLines) lines each
// of lineLen length (pb = playback buffer, for scrolling up)
//
error_t BOpenLineBuf(Buffer_t **pbuf, int mode,
int lineLen, int nLines, int pbCount)
{
return BOpenLineBufEx(pbuf, NULL, mode, lineLen, nLines, pbCount, NULL);
}
error_t BOpenLineBufEx(Buffer_t **pbuf, char *source, int mode,
int lineLen, int nLines, int pbCount, BFlusher_t flusher)
{
error_t rc;
size_t size = lineLen * nLines * (pbCount + 1);
assert(lineLen > 0 && nLines > 0 && pbCount >= 0);
rc = BOpenPureBufEx(pbuf, source, mode, size, flusher);
if (!rc) {
(*pbuf)->lastLF = 0;
(*pbuf)->nLines = nLines;
(*pbuf)->lineLen = lineLen;
(*pbuf)->flags |= BF_LINE;
}
return rc;
}
//
@ -134,7 +168,10 @@ error_t BFlushBuf(Buffer_t *buf)
assert(buf && buf->initDone == INITOK);
if (!buf) return EINVAL;
if (!buf->flusher || buf->state == BS_EOF || buf->state == BS_ERR) {
if (buf->flags & (BF_EOF|BF_ERR)) {
return EENDF;
}
if (!buf->flusher) {
return EBADF;
}

View File

@ -178,6 +178,9 @@ void *memcpy(void *restrict dst, const void *restrict src, size_t bytes)
const ulong *usrc = (const ulong *)src;
ulong *udst = (ulong *)dst;
assert("Don't use this, use memmove()");
assert((dst + bytes < src || src + bytes < dst) && "memcpy() overlap; use memmove()");
if unlikely (bytes == 0) return dst;
// Can align both src and dst at once at once?
@ -232,15 +235,17 @@ void *memmove(void *dst, const void *src, size_t bytes)
const uchar *usrc = src;
uchar *udst = dst;
// Can we use memcpy() safely?
// Can we safely go forward?
if (udst < usrc) {
return memcpy(dst, src, bytes);
while (bytes--) *udst++ = *usrc++;
}
// No, so we go backwards
uchar *usrc_end = (uchar *)usrc + bytes - 1;
uchar *udst_end = udst + bytes - 1;
while (bytes--) *udst_end-- = *usrc_end--;
else {
const uchar *usrc_end = usrc + bytes - 1;
uchar *udst_end = udst + bytes - 1;
while (bytes--) *udst_end-- = *usrc_end--;
}
return dst;
}