cleanup: remove useless files
This commit is contained in:
David JULIEN
parent
7565ea3ae0
commit
4ab01e6c5b
|
|
@ -1,513 +0,0 @@
|
|||
##########################################################
|
||||
## this is example bindings configuration file, copy it ##
|
||||
## to ~/.ncmpcpp/bindings and set up your preferences ##
|
||||
##########################################################
|
||||
##
|
||||
##### General rules #####
|
||||
##
|
||||
## 1) Because each action has runtime checks whether it's
|
||||
## ok to run it, a few actions can be bound to one key.
|
||||
## Actions will be bound in order given in configuration
|
||||
## file. When a key is pressed, first action in order
|
||||
## will test itself whether it's possible to run it. If
|
||||
## test succeeds, action is executed and other actions
|
||||
## bound to this key are ignored. If it doesn't, next
|
||||
## action in order tests itself etc.
|
||||
##
|
||||
## 2) It's possible to bind more that one action at once
|
||||
## to a key. It can be done using the following syntax:
|
||||
##
|
||||
## def_key "key"
|
||||
## action1
|
||||
## action2
|
||||
## ...
|
||||
##
|
||||
## This creates a chain of actions. When such chain is
|
||||
## executed, each action in chain is run until the end of
|
||||
## chain is reached or one of its actions fails to execute
|
||||
## due to its requirements not being met. If multiple actions
|
||||
## and/or chains are bound to the same key, they will be
|
||||
## consecutively run until one of them gets fully executed.
|
||||
##
|
||||
## 3) When ncmpcpp starts, bindings configuration file is
|
||||
## parsed and then ncmpcpp provides "missing pieces"
|
||||
## of default keybindings. If you want to disable some
|
||||
## bindings, there is a special action called 'dummy'
|
||||
## for that purpose. Eg. if you want to disable ability
|
||||
## to crop playlists, you need to put the following
|
||||
## into configuration file:
|
||||
##
|
||||
## def_key "C"
|
||||
## dummy
|
||||
##
|
||||
## After that ncmpcpp will not bind any default action
|
||||
## to this key.
|
||||
##
|
||||
## 4) To let you write simple macros, the following special
|
||||
## actions are provided:
|
||||
##
|
||||
## - push_character "character" - pushes given special
|
||||
## character into input queue, so it will be immediately
|
||||
## picked by ncmpcpp upon next call to readKey function.
|
||||
## Accepted values: mouse, up, down, page_up, page_down,
|
||||
## home, end, space, enter, insert, delete, left, right,
|
||||
## tab, shift_tab, ctrl_a, ctrl_b, ..., ctrl_z, f1, f2,
|
||||
## ..., f12, backspace, backspace_2.
|
||||
##
|
||||
## - push_characters "string" - pushes given string into
|
||||
## input queue.
|
||||
##
|
||||
## - require_runnable "action" - checks whether given action
|
||||
## is runnable and fails if it isn't. This is especially
|
||||
## useful when mixed with previous two functions. Consider
|
||||
## the following macro definition:
|
||||
##
|
||||
## def_key "key"
|
||||
## push_characters "custom_filter"
|
||||
## apply_filter
|
||||
##
|
||||
## If apply_filter can't be currently run, we end up with
|
||||
## sequence of characters in input queue which will be
|
||||
## treated just as we typed them. This may lead to unexpected
|
||||
## results (in this case 'c' will most likely clear current
|
||||
## playlist, 'u' will trigger database update, 's' will stop
|
||||
## playback etc.). To prevent such thing from happening, we
|
||||
## need to change above definition to this one:
|
||||
##
|
||||
## def_key "key"
|
||||
## require_runnable "apply_filter"
|
||||
## push_characters "custom_filter"
|
||||
## apply_filter
|
||||
##
|
||||
## Here, first we test whether apply_filter can be actually run
|
||||
## before we stuff characters into input queue, so if condition
|
||||
## is not met, whole chain is aborted and we're fine.
|
||||
##
|
||||
## - require_screen "screen" - checks whether given screen is
|
||||
## currently active. accepted values: browser, clock, help,
|
||||
## media_library, outputs, playlist, playlist_editor,
|
||||
## search_engine, tag_editor, visualizer, last_fm, lyrics,
|
||||
## selected_items_adder, server_info, song_info,
|
||||
## sort_playlist_dialog, tiny_tag_editor.
|
||||
##
|
||||
## - run_external_command "command" - runs given command using
|
||||
## system() function.
|
||||
##
|
||||
## 5) In addition to binding to a key, you can also bind actions
|
||||
## or chains of actions to a command. If it comes to commands,
|
||||
## syntax is very similar to defining keys. Here goes example
|
||||
## definition of a command:
|
||||
##
|
||||
## def_command "quit" [deferred]
|
||||
## stop
|
||||
## quit
|
||||
##
|
||||
## If you execute the above command (which can be done by
|
||||
## invoking action execute_command, typing 'quit' and pressing
|
||||
## enter), ncmpcpp will stop the player and then quit. Note the
|
||||
## presence of word 'deferred' enclosed in square brackets. It
|
||||
## tells ncmpcpp to wait for confirmation (ie. pressing enter)
|
||||
## after you typed quit. Instead of 'deferred', 'immediate'
|
||||
## could be used. Then ncmpcpp will not wait for confirmation
|
||||
## (enter) and will execute the command the moment it sees it.
|
||||
##
|
||||
## Note: Both 'backspace' and 'backspace_2' are used because some
|
||||
## terminals interpret backspace using keycode of 'backspace'
|
||||
## and some the one of 'backspace_2'. You can get away with
|
||||
## binding once if all your terminal emulators use the same
|
||||
## value.
|
||||
##
|
||||
## Note: There is a difference between:
|
||||
##
|
||||
## def_key "key"
|
||||
## action1
|
||||
##
|
||||
## def_key "key"
|
||||
## action2
|
||||
##
|
||||
## and
|
||||
##
|
||||
## def_key "key"
|
||||
## action1
|
||||
## action2
|
||||
##
|
||||
## First one binds two single actions to the same key whilst
|
||||
## second one defines a chain of actions. The behavior of
|
||||
## these two is different and is described in (1) and (2).
|
||||
##
|
||||
## Note: Function def_key accepts non-ascii characters.
|
||||
##
|
||||
##### List of unbound actions #####
|
||||
##
|
||||
## The following actions are not bound to any key/command:
|
||||
##
|
||||
## - set_volume
|
||||
## - filter_playlist_on_priorities
|
||||
##
|
||||
#
|
||||
#def_key "mouse"
|
||||
# mouse_event
|
||||
#
|
||||
def_key "k"
|
||||
scroll_up
|
||||
|
||||
def_key "j"
|
||||
scroll_down
|
||||
|
||||
#def_key "["
|
||||
# scroll_up_album
|
||||
#
|
||||
#def_key "]"
|
||||
# scroll_down_album
|
||||
#
|
||||
#def_key "{"
|
||||
# scroll_up_artist
|
||||
#
|
||||
#def_key "}"
|
||||
# scroll_down_artist
|
||||
#
|
||||
def_key "g"
|
||||
page_up
|
||||
|
||||
def_key "G"
|
||||
page_down
|
||||
#
|
||||
#def_key "home"
|
||||
# move_home
|
||||
#
|
||||
#def_key "end"
|
||||
# move_end
|
||||
#
|
||||
#def_key "space"
|
||||
# press_space
|
||||
#
|
||||
#def_key "enter"
|
||||
# press_enter
|
||||
#
|
||||
def_key "d"
|
||||
delete_playlist_items
|
||||
|
||||
#def_key "delete"
|
||||
# delete_stored_playlist
|
||||
#
|
||||
def_key "l"
|
||||
next_column
|
||||
#
|
||||
#def_key "right"
|
||||
# slave_screen
|
||||
#
|
||||
#def_key "right"
|
||||
# volume_up
|
||||
#
|
||||
def_key "="
|
||||
volume_up
|
||||
|
||||
def_key "h"
|
||||
previous_column
|
||||
#
|
||||
#def_key "left"
|
||||
# master_screen
|
||||
#
|
||||
#def_key "left"
|
||||
# volume_down
|
||||
#
|
||||
def_key "-"
|
||||
volume_down
|
||||
#
|
||||
#def_key ":"
|
||||
# execute_command
|
||||
#
|
||||
#def_key "tab"
|
||||
# next_screen
|
||||
#
|
||||
#def_key "shift_tab"
|
||||
# previous_screen
|
||||
#
|
||||
def_key "1"
|
||||
show_help
|
||||
|
||||
def_key "2"
|
||||
show_playlist
|
||||
|
||||
def_key "3"
|
||||
show_browser
|
||||
|
||||
def_key "3"
|
||||
change_browse_mode
|
||||
|
||||
def_key "4"
|
||||
show_search_engine
|
||||
|
||||
def_key "4"
|
||||
reset_search_engine
|
||||
|
||||
def_key "5"
|
||||
show_media_library
|
||||
|
||||
def_key "5"
|
||||
toggle_media_library_columns_mode
|
||||
|
||||
def_key "6"
|
||||
show_playlist_editor
|
||||
|
||||
def_key "7"
|
||||
show_tag_editor
|
||||
|
||||
def_key "8"
|
||||
show_outputs
|
||||
|
||||
def_key "9"
|
||||
show_visualizer
|
||||
|
||||
#def_key "="
|
||||
# show_clock
|
||||
#
|
||||
#def_key "@"
|
||||
# show_server_info
|
||||
#
|
||||
#def_key "s"
|
||||
# stop
|
||||
#
|
||||
#def_key "p"
|
||||
# pause
|
||||
#
|
||||
#def_key ">"
|
||||
# next
|
||||
#
|
||||
#def_key "<"
|
||||
# previous
|
||||
#
|
||||
#def_key "ctrl_h"
|
||||
# jump_to_parent_directory
|
||||
#
|
||||
#def_key "ctrl_h"
|
||||
# replay_song
|
||||
#
|
||||
#def_key "backspace"
|
||||
# jump_to_parent_directory
|
||||
#
|
||||
#def_key "backspace"
|
||||
# replay_song
|
||||
#
|
||||
#def_key "backspace_2"
|
||||
# jump_to_parent_directory
|
||||
#
|
||||
#def_key "backspace_2"
|
||||
# replay_song
|
||||
#
|
||||
#def_key "f"
|
||||
# seek_forward
|
||||
#
|
||||
#def_key "b"
|
||||
# seek_backward
|
||||
#
|
||||
#def_key "r"
|
||||
# toggle_repeat
|
||||
#
|
||||
#def_key "z"
|
||||
# toggle_random
|
||||
#
|
||||
#def_key "y"
|
||||
# save_tag_changes
|
||||
#
|
||||
#def_key "y"
|
||||
# start_searching
|
||||
#
|
||||
#def_key "y"
|
||||
# toggle_single
|
||||
#
|
||||
#def_key "R"
|
||||
# toggle_consume
|
||||
#
|
||||
#def_key "Y"
|
||||
# toggle_replay_gain_mode
|
||||
#
|
||||
#def_key "t"
|
||||
# toggle_space_mode
|
||||
#
|
||||
#def_key "T"
|
||||
# toggle_add_mode
|
||||
#
|
||||
#def_key "|"
|
||||
# toggle_mouse
|
||||
#
|
||||
#def_key "#"
|
||||
# toggle_bitrate_visibility
|
||||
#
|
||||
#def_key "Z"
|
||||
# shuffle
|
||||
#
|
||||
#def_key "x"
|
||||
# toggle_crossfade
|
||||
#
|
||||
#def_key "X"
|
||||
# set_crossfade
|
||||
#
|
||||
#def_key "u"
|
||||
# update_database
|
||||
#
|
||||
#def_key "ctrl_v"
|
||||
# sort_playlist
|
||||
#
|
||||
#def_key "ctrl_r"
|
||||
# reverse_playlist
|
||||
#
|
||||
#def_key "ctrl_f"
|
||||
# apply_filter
|
||||
#
|
||||
#def_key "/"
|
||||
# find
|
||||
#
|
||||
#def_key "/"
|
||||
# find_item_forward
|
||||
#
|
||||
#def_key "?"
|
||||
# find
|
||||
#
|
||||
#def_key "?"
|
||||
# find_item_backward
|
||||
#
|
||||
#def_key "."
|
||||
# next_found_item
|
||||
#
|
||||
#def_key ","
|
||||
# previous_found_item
|
||||
#
|
||||
#def_key "w"
|
||||
# toggle_find_mode
|
||||
#
|
||||
#def_key "e"
|
||||
# edit_song
|
||||
#
|
||||
#def_key "e"
|
||||
# edit_library_tag
|
||||
#
|
||||
#def_key "e"
|
||||
# edit_library_album
|
||||
#
|
||||
#def_key "e"
|
||||
# edit_directory_name
|
||||
#
|
||||
#def_key "e"
|
||||
# edit_playlist_name
|
||||
#
|
||||
#def_key "e"
|
||||
# edit_lyrics
|
||||
#
|
||||
#def_key "i"
|
||||
# show_song_info
|
||||
#
|
||||
#def_key "I"
|
||||
# show_artist_info
|
||||
#
|
||||
#def_key "g"
|
||||
# jump_to_position_in_song
|
||||
#
|
||||
def_key "l"
|
||||
show_lyrics
|
||||
|
||||
#def_key "v"
|
||||
# reverse_selection
|
||||
#
|
||||
#def_key "V"
|
||||
# remove_selection
|
||||
#
|
||||
#def_key "B"
|
||||
# select_album
|
||||
#
|
||||
#def_key "a"
|
||||
# add_selected_items
|
||||
#
|
||||
#def_key "c"
|
||||
# clear_playlist
|
||||
#
|
||||
#def_key "c"
|
||||
# clear_main_playlist
|
||||
#
|
||||
#def_key "C"
|
||||
# crop_playlist
|
||||
#
|
||||
#def_key "C"
|
||||
# crop_main_playlist
|
||||
#
|
||||
#def_key "m"
|
||||
# move_sort_order_up
|
||||
#
|
||||
#def_key "m"
|
||||
# move_selected_items_up
|
||||
#
|
||||
#def_key "m"
|
||||
# toggle_media_library_sort_mode
|
||||
#
|
||||
#def_key "m"
|
||||
# set_visualizer_sample_multiplier
|
||||
#
|
||||
#def_key "n"
|
||||
# move_sort_order_down
|
||||
#
|
||||
#def_key "n"
|
||||
# move_selected_items_down
|
||||
#
|
||||
#def_key "M"
|
||||
# move_selected_items_to
|
||||
#
|
||||
#def_key "A"
|
||||
# add
|
||||
#
|
||||
#def_key "S"
|
||||
# save_playlist
|
||||
#
|
||||
#def_key "o"
|
||||
# jump_to_playing_song
|
||||
#
|
||||
#def_key "G"
|
||||
# jump_to_browser
|
||||
#
|
||||
#def_key "G"
|
||||
# jump_to_playlist_editor
|
||||
#
|
||||
#def_key "~"
|
||||
# jump_to_media_library
|
||||
#
|
||||
#def_key "E"
|
||||
# jump_to_tag_editor
|
||||
#
|
||||
#def_key "U"
|
||||
# toggle_playing_song_centering
|
||||
#
|
||||
#def_key "P"
|
||||
# toggle_display_mode
|
||||
#
|
||||
#def_key "\\"
|
||||
# toggle_interface
|
||||
#
|
||||
#def_key "!"
|
||||
# toggle_separators_between_albums
|
||||
#
|
||||
#def_key "L"
|
||||
# toggle_lyrics_fetcher
|
||||
#
|
||||
#def_key "F"
|
||||
# toggle_fetching_lyrics_in_background
|
||||
#
|
||||
#def_key "ctrl_l"
|
||||
# toggle_screen_lock
|
||||
#
|
||||
#def_key "`"
|
||||
# toggle_browser_sort_mode
|
||||
#
|
||||
#def_key "`"
|
||||
# toggle_library_tag_type
|
||||
#
|
||||
#def_key "`"
|
||||
# refetch_lyrics
|
||||
#
|
||||
#def_key "`"
|
||||
# add_random_items
|
||||
#
|
||||
#def_key "ctrl_p"
|
||||
# set_selected_items_priority
|
||||
#
|
||||
def_key "q"
|
||||
quit
|
||||
|
||||
|
|
@ -1,534 +0,0 @@
|
|||
##############################################################################
|
||||
## This is the example configuration file. Copy it to $HOME/.ncmpcpp/config ##
|
||||
## or $XDG_CONFIG_HOME/ncmpcpp/config and set up your preferences. ##
|
||||
##############################################################################
|
||||
#
|
||||
##### directories ######
|
||||
##
|
||||
## Directory for storing ncmpcpp related files. Changing it is useful if you
|
||||
## want to store everything somewhere else and provide command line setting for
|
||||
## alternative location to config file which defines that while launching
|
||||
## ncmpcpp.
|
||||
##
|
||||
#
|
||||
ncmpcpp_directory = ~/.config/ncmpcpp
|
||||
#
|
||||
##
|
||||
## Directory for storing downloaded lyrics. It defaults to ~/.lyrics since other
|
||||
## MPD clients (eg. ncmpc) also use that location.
|
||||
##
|
||||
#
|
||||
lyrics_directory = ~/music/.lyrics
|
||||
#
|
||||
##### connection settings #####
|
||||
#
|
||||
mpd_host = localhost
|
||||
#
|
||||
mpd_port = 6600
|
||||
#
|
||||
mpd_connection_timeout = 5
|
||||
#
|
||||
## Needed for tag editor and file operations to work.
|
||||
##
|
||||
mpd_music_dir = ~/music
|
||||
#
|
||||
mpd_crossfade_time = 5
|
||||
#
|
||||
##### music visualizer #####
|
||||
##
|
||||
## Note: In order to make music visualizer work you'll need to use mpd fifo
|
||||
## output, whose format parameter has to be set to 44100:16:1 for mono
|
||||
## visualization or 44100:16:2 for stereo visualization. Example configuration
|
||||
## (it has to be put into mpd.conf):
|
||||
##
|
||||
## audio_output {
|
||||
## type "fifo"
|
||||
## name "Visualizer feed"
|
||||
## path "/tmp/mpd.fifo"
|
||||
## format "44100:16:2"
|
||||
## }
|
||||
##
|
||||
#
|
||||
visualizer_data_source = /tmp/mpd.fifo
|
||||
#
|
||||
##
|
||||
## Note: Below parameter is needed for ncmpcpp to determine which output
|
||||
## provides data for visualizer and thus allow syncing between visualization and
|
||||
## sound as currently there are some problems with it.
|
||||
##
|
||||
#
|
||||
visualizer_output_name = Visualizer feed
|
||||
#
|
||||
##
|
||||
## If you set format to 44100:16:2, make it 'yes'.
|
||||
##
|
||||
visualizer_in_stereo = yes
|
||||
#
|
||||
##
|
||||
## Note: To enable spectrum frequency visualization you need to compile ncmpcpp
|
||||
## with fftw3 support.
|
||||
##
|
||||
#
|
||||
## Available values: spectrum, wave, wave_filled, ellipse.
|
||||
##
|
||||
visualizer_type = spectrum
|
||||
#
|
||||
visualizer_look = ●▮
|
||||
#
|
||||
visualizer_color = blue, cyan, green, yellow, magenta, red
|
||||
#
|
||||
## Alternative subset of 256 colors for terminals that support it.
|
||||
##
|
||||
#visualizer_color = 41, 83, 119, 155, 185, 215, 209, 203, 197, 161
|
||||
#
|
||||
##### system encoding #####
|
||||
##
|
||||
## ncmpcpp should detect your charset encoding but if it failed to do so, you
|
||||
## can specify charset encoding you are using here.
|
||||
##
|
||||
## Note: You can see whether your ncmpcpp build supports charset detection by
|
||||
## checking output of `ncmpcpp --version`.
|
||||
##
|
||||
## Note: Since MPD uses UTF-8 by default, setting this option makes sense only
|
||||
## if your encoding is different.
|
||||
##
|
||||
#
|
||||
#system_encoding = ""
|
||||
#
|
||||
##### delays #####
|
||||
#
|
||||
## Time of inactivity (in seconds) after playlist highlighting will be disabled
|
||||
## (0 = always on).
|
||||
##
|
||||
#playlist_disable_highlight_delay = 5
|
||||
#
|
||||
## Defines how long messages are supposed to be visible.
|
||||
##
|
||||
#message_delay_time = 5
|
||||
#
|
||||
##### song format #####
|
||||
##
|
||||
## For a song format you can use:
|
||||
##
|
||||
## %l - length
|
||||
## %f - filename
|
||||
## %D - directory
|
||||
## %a - artist
|
||||
## %A - album artist
|
||||
## %t - title
|
||||
## %b - album
|
||||
## %y - date
|
||||
## %n - track number (01/12 -> 01)
|
||||
## %N - full track info (01/12 -> 01/12)
|
||||
## %g - genre
|
||||
## %c - composer
|
||||
## %p - performer
|
||||
## %d - disc
|
||||
## %C - comment
|
||||
## %P - priority
|
||||
## $R - begin right alignment
|
||||
##
|
||||
## If you want to make sure that a part of the format is displayed only when
|
||||
## certain tags are present, you can archieve it by grouping them with brackets,
|
||||
## e.g. '{%a - %t}' will be evaluated to 'ARTIST - TITLE' if both tags are
|
||||
## present or '' otherwise. It is also possible to define a list of
|
||||
## alternatives by providing several groups and separating them with '|',
|
||||
## e.g. '{%t}|{%f}' will be evaluated to 'TITLE' or 'FILENAME' if the former is
|
||||
## not present.
|
||||
##
|
||||
## Note: If you want to set limit on maximal length of a tag, just put the
|
||||
## appropriate number between % and character that defines tag type, e.g. to
|
||||
## make album take max. 20 terminal cells, use '%20b'.
|
||||
##
|
||||
## In addition, formats support markers used for text attributes. They are
|
||||
## followed by character '$'. After that you can put:
|
||||
##
|
||||
## - 0 - default window color (discards all other colors)
|
||||
## - 1 - black
|
||||
## - 2 - red
|
||||
## - 3 - green
|
||||
## - 4 - yellow
|
||||
## - 5 - blue
|
||||
## - 6 - magenta
|
||||
## - 7 - cyan
|
||||
## - 8 - white
|
||||
## - 9 - end of current color
|
||||
## - b - bold text
|
||||
## - u - underline text
|
||||
## - r - reverse colors
|
||||
## - a - use alternative character set
|
||||
##
|
||||
## If you don't want to use a non-color attribute anymore, just put it again,
|
||||
## but this time insert character '/' between '$' and attribute character,
|
||||
## e.g. {$b%t$/b}|{$r%f$/r} will display bolded title tag or filename with
|
||||
## reversed colors.
|
||||
##
|
||||
## If you want to use 256 colors and/or background colors in formats (the naming
|
||||
## scheme is described below in section about color definitions), it can be done
|
||||
## with the syntax $(COLOR), e.g. to set the artist tag to one of the
|
||||
## non-standard colors and make it have yellow background, you need to write
|
||||
## $(197_yellow)%a$(end). Note that for standard colors this is interchangable
|
||||
## with attributes listed above.
|
||||
##
|
||||
## Note: colors can be nested.
|
||||
##
|
||||
song_list_format = "{$3[%l]$9} {$6%t$9}|{$6%30f$9} %n"
|
||||
#
|
||||
song_status_format = $b {$3%a$9 - $7{%t}}|{%f} {(%b)}
|
||||
#
|
||||
#song_library_format = {%n - }{%t}|{%f}
|
||||
#
|
||||
#alternative_header_first_line_format = $b$1$aqqu$/a$9 {%t}|{%f} $1$atqq$/a$9$/b
|
||||
#
|
||||
#alternative_header_second_line_format = {{$4$b%a$/b$9}{ - $7%b$9}{ ($4%y$9)}}|{%D}
|
||||
#
|
||||
#current_item_prefix = $(yellow)$r
|
||||
#
|
||||
#current_item_suffix = $/r$(end)
|
||||
#
|
||||
#current_item_inactive_column_prefix = $(white)$r
|
||||
#
|
||||
#current_item_inactive_column_suffix = $/r$(end)
|
||||
#
|
||||
#now_playing_prefix = $b
|
||||
#
|
||||
#now_playing_suffix = $/b
|
||||
#
|
||||
#browser_playlist_prefix = "$2playlist$9 "
|
||||
#
|
||||
#selected_item_prefix = $6
|
||||
#
|
||||
#selected_item_suffix = $9
|
||||
#
|
||||
#modified_item_prefix = $3> $9
|
||||
#
|
||||
##
|
||||
## Note: attributes are not supported for the following variables.
|
||||
##
|
||||
#song_window_title_format = {%a - }{%t}|{%f}
|
||||
##
|
||||
## Note: Below variables are used for sorting songs in browser. The sort mode
|
||||
## determines how songs are sorted, and can be used in combination with a sort
|
||||
## format to specify a custom sorting format. Available values for
|
||||
## browser_sort_mode are "name", "mtime", "format" and "noop".
|
||||
##
|
||||
#
|
||||
#browser_sort_mode = name
|
||||
#
|
||||
#browser_sort_format = {%a - }{%t}|{%f} {(%l)}
|
||||
#
|
||||
##### columns settings #####
|
||||
##
|
||||
## syntax of song columns list format is "column column etc."
|
||||
##
|
||||
## - syntax for each column is:
|
||||
##
|
||||
## (width of the column)[color of the column]{displayed tag}
|
||||
##
|
||||
## Note: Width is by default in %, if you want a column to have fixed size, add
|
||||
## 'f' after the value, e.g. (10)[white]{a} will be the column that take 10% of
|
||||
## screen (so the real width will depend on actual screen size), whereas
|
||||
## (10f)[white]{a} will take 10 terminal cells, no matter how wide the screen
|
||||
## is.
|
||||
##
|
||||
## - color is optional (if you want the default one, leave the field empty).
|
||||
##
|
||||
## Note: You can give a column additional attributes by putting appropriate
|
||||
## character after displayed tag character. Available attributes are:
|
||||
##
|
||||
## - r - column will be right aligned
|
||||
## - E - if tag is empty, empty tag marker won't be displayed
|
||||
##
|
||||
## You can also:
|
||||
##
|
||||
## - give a column custom name by putting it after attributes, separated with
|
||||
## character ':', e.g. {lr:Length} gives you right aligned column of lengths
|
||||
## named "Length".
|
||||
##
|
||||
## - define sequence of tags, that have to be displayed in case predecessor is
|
||||
## empty in a way similar to the one in classic song format, i.e. using '|'
|
||||
## character, e.g. {a|c|p:Owner} creates column named "Owner" that tries to
|
||||
## display artist tag and then composer and performer if previous ones are not
|
||||
## available.
|
||||
##
|
||||
#
|
||||
song_columns_list_format = (6f)[green]{NE} (30)[white]{30t|30f:Title} (7f)[green]{l} (30)[]{a} (30)[]{b}
|
||||
#
|
||||
##### various settings #####
|
||||
#
|
||||
##
|
||||
## Note: Custom command that will be executed each time song changes. Useful for
|
||||
## notifications etc.
|
||||
##
|
||||
#execute_on_song_change = ""
|
||||
#
|
||||
##
|
||||
## Note: Custom command that will be executed each time player state
|
||||
## changes. The environment variable MPD_PLAYER_STATE is set to the current
|
||||
## state (either unknown, play, pause, or stop) for its duration.
|
||||
##
|
||||
#
|
||||
#execute_on_player_state_change = ""
|
||||
#
|
||||
#playlist_show_mpd_host = no
|
||||
#
|
||||
#playlist_show_remaining_time = no
|
||||
#
|
||||
#playlist_shorten_total_times = no
|
||||
#
|
||||
#playlist_separate_albums = no
|
||||
#
|
||||
##
|
||||
## Note: Possible display modes: classic, columns.
|
||||
##
|
||||
#playlist_display_mode = columns
|
||||
#
|
||||
#browser_display_mode = classic
|
||||
#
|
||||
#search_engine_display_mode = classic
|
||||
#
|
||||
#playlist_editor_display_mode = classic
|
||||
#
|
||||
#discard_colors_if_item_is_selected = yes
|
||||
#
|
||||
#show_duplicate_tags = yes
|
||||
#
|
||||
#incremental_seeking = yes
|
||||
#
|
||||
#seek_time = 1
|
||||
#
|
||||
#volume_change_step = 2
|
||||
#
|
||||
#autocenter_mode = no
|
||||
#
|
||||
#centered_cursor = no
|
||||
#
|
||||
##
|
||||
## Note: You can specify third character which will be used to build 'empty'
|
||||
## part of progressbar.
|
||||
##
|
||||
#progressbar_look = =>
|
||||
#
|
||||
## Available values: database, playlist.
|
||||
##
|
||||
#default_place_to_search_in = database
|
||||
#
|
||||
## Available values: classic, alternative.
|
||||
##
|
||||
#user_interface = classic
|
||||
#
|
||||
#data_fetching_delay = yes
|
||||
#
|
||||
## Available values: artist, album_artist, date, genre, composer, performer.
|
||||
##
|
||||
#media_library_primary_tag = artist
|
||||
#
|
||||
#media_library_albums_split_by_date = yes
|
||||
#
|
||||
## Available values: wrapped, normal.
|
||||
##
|
||||
#default_find_mode = wrapped
|
||||
#
|
||||
#default_tag_editor_pattern = %n - %t
|
||||
#
|
||||
#header_visibility = yes
|
||||
#
|
||||
#statusbar_visibility = yes
|
||||
#
|
||||
#titles_visibility = yes
|
||||
#
|
||||
#header_text_scrolling = yes
|
||||
#
|
||||
#cyclic_scrolling = no
|
||||
#
|
||||
#lines_scrolled = 2
|
||||
#
|
||||
#lyrics_fetchers = lyricwiki, azlyrics, genius, sing365, lyricsmania, metrolyrics, justsomelyrics, jahlyrics, plyrics, tekstowo, internet
|
||||
#
|
||||
#follow_now_playing_lyrics = no
|
||||
#
|
||||
#fetch_lyrics_for_current_song_in_background = no
|
||||
#
|
||||
#store_lyrics_in_song_dir = no
|
||||
#
|
||||
#generate_win32_compatible_filenames = yes
|
||||
#
|
||||
#allow_for_physical_item_deletion = no
|
||||
#
|
||||
##
|
||||
## Note: If you set this variable, ncmpcpp will try to get info from last.fm in
|
||||
## language you set and if it fails, it will fall back to english. Otherwise it
|
||||
## will use english the first time.
|
||||
##
|
||||
## Note: Language has to be expressed as an ISO 639 alpha-2 code.
|
||||
##
|
||||
#lastfm_preferred_language = en
|
||||
#
|
||||
#space_add_mode = add_remove
|
||||
#
|
||||
#show_hidden_files_in_local_browser = no
|
||||
#
|
||||
##
|
||||
## How shall screen switcher work?
|
||||
##
|
||||
## - "previous" - switch between the current and previous screen.
|
||||
## - "screen1,...,screenN" - switch between given sequence of screens.
|
||||
##
|
||||
## Screens available for use: help, playlist, browser, search_engine,
|
||||
## media_library, playlist_editor, tag_editor, outputs, visualizer, clock,
|
||||
## lyrics, last_fm.
|
||||
##
|
||||
screen_switcher_mode = playlist, browser
|
||||
#
|
||||
##
|
||||
## Note: You can define startup screen by choosing screen from the list above.
|
||||
##
|
||||
startup_screen = browser
|
||||
#
|
||||
##
|
||||
## Note: You can define startup slave screen by choosing screen from the list
|
||||
## above or an empty value for no slave screen.
|
||||
##
|
||||
#startup_slave_screen = ""
|
||||
#
|
||||
#startup_slave_screen_focus = no
|
||||
#
|
||||
##
|
||||
## Default width of locked screen (in %). Acceptable values are from 20 to 80.
|
||||
##
|
||||
#
|
||||
#locked_screen_width_part = 50
|
||||
#
|
||||
#ask_for_locked_screen_width_part = yes
|
||||
#
|
||||
#jump_to_now_playing_song_at_start = yes
|
||||
#
|
||||
#ask_before_clearing_playlists = yes
|
||||
#
|
||||
#clock_display_seconds = no
|
||||
#
|
||||
#display_volume_level = yes
|
||||
#
|
||||
#display_bitrate = no
|
||||
#
|
||||
#display_remaining_time = no
|
||||
#
|
||||
## Available values: none, basic, extended, perl.
|
||||
##
|
||||
#regular_expressions = perl
|
||||
#
|
||||
##
|
||||
## Note: if below is enabled, ncmpcpp will ignore leading "The" word while
|
||||
## sorting items in browser, tags in media library, etc.
|
||||
##
|
||||
#ignore_leading_the = no
|
||||
#
|
||||
##
|
||||
## Note: if below is enabled, ncmpcpp will ignore diacritics while searching and
|
||||
## filtering lists. This takes an effect only if boost was compiled with ICU
|
||||
## support.
|
||||
##
|
||||
#ignore_diacritics = no
|
||||
#
|
||||
#block_search_constraints_change_if_items_found = yes
|
||||
#
|
||||
#mouse_support = yes
|
||||
#
|
||||
#mouse_list_scroll_whole_page = yes
|
||||
#
|
||||
#empty_tag_marker = <empty>
|
||||
#
|
||||
#tags_separator = " | "
|
||||
#
|
||||
#tag_editor_extended_numeration = no
|
||||
#
|
||||
#media_library_sort_by_mtime = no
|
||||
#
|
||||
#enable_window_title = yes
|
||||
#
|
||||
##
|
||||
## Note: You can choose default search mode for search engine. Available modes
|
||||
## are:
|
||||
##
|
||||
## - 1 - use mpd built-in searching (no regexes, pattern matching)
|
||||
##
|
||||
## - 2 - use ncmpcpp searching (pattern matching with support for regexes, but
|
||||
## if your mpd is on a remote machine, downloading big database to process
|
||||
## it can take a while
|
||||
##
|
||||
## - 3 - match only exact values (this mode uses mpd function for searching in
|
||||
## database and local one for searching in current playlist)
|
||||
##
|
||||
#
|
||||
#search_engine_default_search_mode = 1
|
||||
#
|
||||
#external_editor = nano
|
||||
#
|
||||
## Note: set to yes if external editor is a console application.
|
||||
##
|
||||
#use_console_editor = yes
|
||||
#
|
||||
##### colors definitions #####
|
||||
##
|
||||
## It is possible to set a background color by setting a color value
|
||||
## "<foreground>_<background>", e.g. red_black will set foregound color to red
|
||||
## and background color to black.
|
||||
##
|
||||
## In addition, for terminals that support 256 colors it is possible to set one
|
||||
## of them by using a number in range [1, 256] instead of color name,
|
||||
## e.g. numerical value corresponding to red_black is 2_1. To find out if the
|
||||
## terminal supports 256 colors, run ncmpcpp and check out the bottom of the
|
||||
## help screen for list of available colors and their numerical values.
|
||||
##
|
||||
## What is more, there are two special values for the background color:
|
||||
## "transparent" and "current". The first one explicitly sets the background to
|
||||
## be transparent, while the second one allows you to preserve current
|
||||
## background color and change only the foreground one. It's used implicitly
|
||||
## when background color is not specified.
|
||||
##
|
||||
## Moreover, it is possible to attach format information to selected color
|
||||
## variables by appending to their end a colon followed by one or more format
|
||||
## flags, e.g. black:b or red:ur. The following variables support this syntax:
|
||||
## visualizer_color, color1, color2, empty_tag_color, volume_color,
|
||||
## state_line_color, state_flags_color, progressbar_color,
|
||||
## progressbar_elapsed_color, player_state_color, statusbar_time_color,
|
||||
## alternative_ui_separator_color.
|
||||
##
|
||||
## Note: due to technical limitations of older ncurses version, if 256 colors
|
||||
## are used there is a possibility that you'll be able to use only colors with
|
||||
## transparent background.
|
||||
#
|
||||
#colors_enabled = yes
|
||||
#
|
||||
#empty_tag_color = cyan
|
||||
#
|
||||
#header_window_color = default
|
||||
#
|
||||
#volume_color = default
|
||||
#
|
||||
#state_line_color = default
|
||||
#
|
||||
#state_flags_color = default:b
|
||||
#
|
||||
#main_window_color = yellow
|
||||
#
|
||||
#color1 = white
|
||||
#
|
||||
#color2 = green
|
||||
#
|
||||
#progressbar_color = black:b
|
||||
#
|
||||
#progressbar_elapsed_color = green:b
|
||||
#
|
||||
#statusbar_color = default
|
||||
#
|
||||
#statusbar_time_color = default:b
|
||||
#
|
||||
#player_state_color = default:b
|
||||
#
|
||||
#alternative_ui_separator_color = black:b
|
||||
#
|
||||
#window_border_color = green
|
||||
#
|
||||
#active_window_border = red
|
||||
#
|
||||
|
|
@ -1,12 +0,0 @@
|
|||
[Trigger]
|
||||
Operation = Remove
|
||||
Operation = Install
|
||||
Operation = Upgrade
|
||||
Type = Package
|
||||
Target = *
|
||||
|
||||
[Action]
|
||||
Description = Keep the last cache and the currently installed...
|
||||
Depends = pacman-contrib
|
||||
When = PostTransaction
|
||||
Exec = /usr/bin/paccache -rvk2
|
||||
|
|
@ -1,11 +0,0 @@
|
|||
[Trigger]
|
||||
Type = Package
|
||||
Operation = Install
|
||||
Operation = Upgrade
|
||||
Target = bash
|
||||
|
||||
[Action]
|
||||
Description = Re-pointing /bin/sh symlink to dash...
|
||||
When = PostTransaction
|
||||
Exec = /usr/bin/ln -sfT dash /usr/bin/sh
|
||||
Depends = dash
|
||||
|
|
@ -1,10 +0,0 @@
|
|||
[Trigger]
|
||||
Operation = Remove
|
||||
Operation = Install
|
||||
Type = Package
|
||||
Target = *
|
||||
|
||||
[Action]
|
||||
Description = Update the pkglist...
|
||||
When = PostTransaction
|
||||
Exec = /bin/sh -c '/usr/bin/pacman -Qqe > /home/swytch/.config/paru/pkglist.txt'
|
||||
|
|
@ -1,29 +0,0 @@
|
|||
#
|
||||
# $PARU_CONF
|
||||
# /etc/paru.conf
|
||||
# ~/.config/paru/paru.conf
|
||||
#
|
||||
# See the paru.conf(5) manpage for options
|
||||
|
||||
#
|
||||
# GENERAL OPTIONS
|
||||
#
|
||||
[options]
|
||||
PgpFetch
|
||||
Devel
|
||||
Provides
|
||||
DevelSuffixes = -git -cvs -svn -bzr -darcs -always
|
||||
BottomUp
|
||||
RemoveMake
|
||||
SudoLoop
|
||||
#UseAsk
|
||||
#CombinedUpgrade
|
||||
#CleanAfter
|
||||
#UpgradeMenu
|
||||
NewsOnUpgrade
|
||||
|
||||
#
|
||||
# Binary OPTIONS
|
||||
#
|
||||
#[bin]
|
||||
#FileManager = vifm
|
||||
|
|
@ -1,110 +0,0 @@
|
|||
abcde
|
||||
abook
|
||||
adobe-source-han-sans-cn-fonts
|
||||
adobe-source-han-sans-jp-fonts
|
||||
alsa-plugins
|
||||
alsa-utils
|
||||
android-tools
|
||||
android-udev
|
||||
arandr
|
||||
autoconf
|
||||
automake
|
||||
autorandr
|
||||
base
|
||||
beets
|
||||
binutils
|
||||
bison
|
||||
capitaine-cursors
|
||||
cdparanoia
|
||||
clang
|
||||
cmake
|
||||
cronie
|
||||
dash
|
||||
dunst
|
||||
efibootmgr
|
||||
fakeroot
|
||||
file
|
||||
findutils
|
||||
firefox
|
||||
flex
|
||||
gawk
|
||||
gcc
|
||||
gettext
|
||||
git
|
||||
grep
|
||||
groff
|
||||
grub
|
||||
gsasl
|
||||
gzip
|
||||
htop
|
||||
imagemagick
|
||||
isync
|
||||
iwd
|
||||
jedi-language-server
|
||||
libnotify
|
||||
libtool
|
||||
linux
|
||||
linux-firmware
|
||||
linux-lts
|
||||
lynx
|
||||
m4
|
||||
make
|
||||
man-db
|
||||
mpc
|
||||
mpd
|
||||
mpv
|
||||
msmtp
|
||||
ncmpcpp
|
||||
neomutt
|
||||
ninja
|
||||
nnn
|
||||
notmuch
|
||||
pacman
|
||||
pacman-contrib
|
||||
pam-gnupg
|
||||
paru
|
||||
pass
|
||||
patch
|
||||
pkgconf
|
||||
pulseaudio-alsa
|
||||
pulsemixer
|
||||
python-eyed3
|
||||
python-requests
|
||||
redshift
|
||||
sed
|
||||
shotgun
|
||||
sox
|
||||
sudo
|
||||
sxhkd
|
||||
sxiv
|
||||
texinfo
|
||||
texlab
|
||||
texlive-bibtexextra
|
||||
texlive-core
|
||||
texlive-latexextra
|
||||
transmission-cli
|
||||
tree-sitter
|
||||
tremc
|
||||
ttf-dejavu
|
||||
ttf-fira-sans
|
||||
ttf-iosevka-fixed-slab
|
||||
ttf-nerd-fonts-symbols-mono
|
||||
unzip
|
||||
upower
|
||||
usbutils
|
||||
which
|
||||
xcape
|
||||
xclip
|
||||
xf86-video-intel
|
||||
xorg-server
|
||||
xorg-xinit
|
||||
xorg-xinput
|
||||
xorg-xsetroot
|
||||
xss-lock
|
||||
xwallpaper
|
||||
zathura
|
||||
zathura-pdf-mupdf
|
||||
zip
|
||||
zsh
|
||||
zsh-history-substring-search
|
||||
zsh-syntax-highlighting
|
||||
|
|
@ -1,55 +0,0 @@
|
|||
# GRUB boot loader configuration
|
||||
|
||||
GRUB_DEFAULT="2"
|
||||
GRUB_TIMEOUT=5
|
||||
GRUB_DISTRIBUTOR="Arch"
|
||||
GRUB_CMDLINE_LINUX_DEFAULT="quiet i915.enable_fbc=0"
|
||||
GRUB_CMDLINE_LINUX=""
|
||||
GRUB_DISABLE_SUBMENU=y
|
||||
|
||||
# Preload both GPT and MBR modules so that they are not missed
|
||||
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
|
||||
|
||||
# Uncomment to enable booting from LUKS encrypted devices
|
||||
#GRUB_ENABLE_CRYPTODISK=y
|
||||
|
||||
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
|
||||
#GRUB_HIDDEN_TIMEOUT=5
|
||||
#GRUB_HIDDEN_TIMEOUT_QUIET=true
|
||||
|
||||
# Uncomment to use basic console
|
||||
GRUB_TERMINAL_INPUT=console
|
||||
|
||||
# Uncomment to disable graphical terminal
|
||||
#GRUB_TERMINAL_OUTPUT=console
|
||||
|
||||
# The resolution used on graphical terminal
|
||||
# note that you can use only modes which your graphic card supports via VBE
|
||||
# you can see them in real GRUB with the command `vbeinfo'
|
||||
GRUB_GFXMODE=auto
|
||||
|
||||
# Uncomment to allow the kernel use the same resolution used by grub
|
||||
GRUB_GFXPAYLOAD_LINUX=keep
|
||||
|
||||
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
|
||||
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
|
||||
#GRUB_DISABLE_LINUX_UUID=true
|
||||
|
||||
# Uncomment to disable generation of recovery mode menu entries
|
||||
GRUB_DISABLE_RECOVERY=true
|
||||
|
||||
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
|
||||
# modes only. Entries specified as foreground/background.
|
||||
#GRUB_COLOR_NORMAL="light-blue/black"
|
||||
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
|
||||
|
||||
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
|
||||
#GRUB_BACKGROUND="/path/to/wallpaper"
|
||||
#GRUB_THEME="/path/to/gfxtheme"
|
||||
|
||||
# Uncomment to get a beep at GRUB start
|
||||
#GRUB_INIT_TUNE="480 440 1"
|
||||
|
||||
# Uncomment to make GRUB remember the last selection. This requires to
|
||||
# set 'GRUB_DEFAULT=saved' above.
|
||||
#GRUB_SAVEDEFAULT="true"
|
||||
|
|
@ -1,101 +0,0 @@
|
|||
#
|
||||
# /etc/pacman.conf
|
||||
#
|
||||
# See the pacman.conf(5) manpage for option and repository directives
|
||||
|
||||
#
|
||||
# GENERAL OPTIONS
|
||||
#
|
||||
[options]
|
||||
# The following paths are commented out with their default values listed.
|
||||
# If you wish to use different paths, uncomment and update the paths.
|
||||
#RootDir = /
|
||||
#DBPath = /var/lib/pacman/
|
||||
#CacheDir = /var/cache/pacman/pkg/
|
||||
#LogFile = /var/log/pacman.log
|
||||
#GPGDir = /etc/pacman.d/gnupg/
|
||||
HookDir = /home/swytch/.config/pacman/hooks
|
||||
HoldPkg = pacman glibc
|
||||
#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
|
||||
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
|
||||
#CleanMethod = KeepInstalled
|
||||
#UseDelta = 0.7
|
||||
Architecture = auto
|
||||
|
||||
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
|
||||
#IgnorePkg =
|
||||
#IgnoreGroup =
|
||||
|
||||
#NoUpgrade =
|
||||
#NoExtract =
|
||||
|
||||
# Misc options
|
||||
#UseSyslog
|
||||
Color
|
||||
TotalDownload
|
||||
CheckSpace
|
||||
VerbosePkgLists
|
||||
|
||||
# By default, pacman accepts packages signed by keys that its local keyring
|
||||
# trusts (see pacman-key and its man page), as well as unsigned packages.
|
||||
SigLevel = Required DatabaseOptional
|
||||
LocalFileSigLevel = Optional
|
||||
#RemoteFileSigLevel = Required
|
||||
|
||||
# NOTE: You must run `pacman-key --init` before first using pacman; the local
|
||||
# keyring can then be populated with the keys of all official Arch Linux
|
||||
# packagers with `pacman-key --populate archlinux`.
|
||||
|
||||
#
|
||||
# REPOSITORIES
|
||||
# - can be defined here or included from another file
|
||||
# - pacman will search repositories in the order defined here
|
||||
# - local/custom mirrors can be added here or in separate files
|
||||
# - repositories listed first will take precedence when packages
|
||||
# have identical names, regardless of version number
|
||||
# - URLs will have $repo replaced by the name of the current repo
|
||||
# - URLs will have $arch replaced by the name of the architecture
|
||||
#
|
||||
# Repository entries are of the format:
|
||||
# [repo-name]
|
||||
# Server = ServerName
|
||||
# Include = IncludePath
|
||||
#
|
||||
# The header [repo-name] is crucial - it must be present and
|
||||
# uncommented to enable the repo.
|
||||
#
|
||||
|
||||
# The testing repositories are disabled by default. To enable, uncomment the
|
||||
# repo name header and Include lines. You can add preferred servers immediately
|
||||
# after the header, and they will be used before the default mirrors.
|
||||
|
||||
#[testing]
|
||||
#Include = /etc/pacman.d/mirrorlist
|
||||
|
||||
[core]
|
||||
Include = /etc/pacman.d/mirrorlist
|
||||
|
||||
[extra]
|
||||
Include = /etc/pacman.d/mirrorlist
|
||||
|
||||
#[community-testing]
|
||||
#Include = /etc/pacman.d/mirrorlist
|
||||
|
||||
[community]
|
||||
Include = /etc/pacman.d/mirrorlist
|
||||
|
||||
# If you want to run 32 bit applications on your x86_64 system,
|
||||
# enable the multilib repositories as required here.
|
||||
|
||||
#[multilib-testing]
|
||||
#Include = /etc/pacman.d/mirrorlist
|
||||
|
||||
#[multilib]
|
||||
#Include = /etc/pacman.d/mirrorlist
|
||||
|
||||
# An example of a custom package repository. See the pacman manpage for
|
||||
# tips on creating your own repositories.
|
||||
#[custom]
|
||||
#SigLevel = Optional TrustAll
|
||||
#Server = file:///home/custompkgs
|
||||
|
||||
|
|
@ -1,473 +0,0 @@
|
|||
# ------------------------------------------------------------------------------
|
||||
# /etc/tlp.conf - TLP user configuration
|
||||
# See full explanation: https://linrunner.de/en/tlp/docs/tlp-configuration.html
|
||||
#
|
||||
# New configuration scheme (TLP 1.3). Settings are read in the following order:
|
||||
|
||||
# 1. Intrinsic defaults
|
||||
# 2. /etc/tlp.d/*.conf - Drop-in customization snippets
|
||||
# 3. /etc/tlp.conf - User configuration (this file)
|
||||
#
|
||||
# Notes:
|
||||
# - In case of identical parameters, the last occurence has precedence
|
||||
# - This also means, parameters enabled here will override anything else
|
||||
# - IMPORTANT: all parameters here are disabled, remove the leading '#'
|
||||
# to enable them; shown values may be suggestions rather than defaults
|
||||
# - Default *: intrinsic default that is effective when the parameter is missing
|
||||
# or disabled by a leading '#'; use PARAM="" to disable an intrinsic default
|
||||
# - Default <none>: do nothing or use kernel/hardware defaults
|
||||
|
||||
# ------------------------------------------------------------------------------
|
||||
# tlp - Parameters for power saving
|
||||
|
||||
# Set to 0 to disable, 1 to enable TLP.
|
||||
# Default: 1
|
||||
|
||||
#TLP_ENABLE=1
|
||||
|
||||
# Operation mode when no power supply can be detected: AC, BAT.
|
||||
# Concerns some desktop and embedded hardware only.
|
||||
# Default: <none>
|
||||
|
||||
#TLP_DEFAULT_MODE=AC
|
||||
|
||||
# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
|
||||
# Note: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
|
||||
# Default: 0
|
||||
|
||||
#TLP_PERSISTENT_DEFAULT=0
|
||||
|
||||
# Power supply class to ignore when determining operation mode: AC, BAT.
|
||||
# Note: try on laptops where operation mode AC/BAT is incorrectly detected.
|
||||
# Default: <none>
|
||||
|
||||
#TLP_PS_IGNORE=BAT
|
||||
|
||||
# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
|
||||
# Non-zero value enables, zero disables laptop mode.
|
||||
# Default: 0 (AC), 2 (BAT)
|
||||
|
||||
#DISK_IDLE_SECS_ON_AC=0
|
||||
#DISK_IDLE_SECS_ON_BAT=2
|
||||
|
||||
# Dirty page values (timeouts in secs).
|
||||
# Default: 15 (AC), 60 (BAT)
|
||||
|
||||
#MAX_LOST_WORK_SECS_ON_AC=15
|
||||
#MAX_LOST_WORK_SECS_ON_BAT=60
|
||||
|
||||
# Note: CPU parameters below are disabled by default, remove the leading #
|
||||
# to enable them, otherwise kernel defaults will be used.
|
||||
#
|
||||
# Select a CPU frequency scaling governor.
|
||||
# Intel Core i processor with intel_pstate driver:
|
||||
# powersave(*), performance.
|
||||
# Other hardware with acpi-cpufreq driver:
|
||||
# ondemand(*), powersave, performance, conservative, schedutil.
|
||||
# (*) is recommended.
|
||||
# Use tlp-stat -p to show the active driver and available governors.
|
||||
# Important:
|
||||
# powersave for intel_pstate and ondemand for acpi-cpufreq are power
|
||||
# efficient for *almost all* workloads and therefore kernel and most
|
||||
# distributions have chosen them as defaults. If you still want to change,
|
||||
# you should know what you're doing!
|
||||
# Default: <none>
|
||||
|
||||
#CPU_SCALING_GOVERNOR_ON_AC=powersave
|
||||
#CPU_SCALING_GOVERNOR_ON_BAT=powersave
|
||||
|
||||
# Set the min/max frequency available for the scaling governor.
|
||||
# Possible values depend on your CPU. For available frequencies see
|
||||
# the output of tlp-stat -p.
|
||||
# Default: <none>
|
||||
|
||||
#CPU_SCALING_MIN_FREQ_ON_AC=0
|
||||
#CPU_SCALING_MAX_FREQ_ON_AC=0
|
||||
#CPU_SCALING_MIN_FREQ_ON_BAT=0
|
||||
#CPU_SCALING_MAX_FREQ_ON_BAT=0
|
||||
|
||||
# Set Intel CPU energy/performance policies HWP.EPP and EPB:
|
||||
# performance, balance_performance, default, balance_power, power
|
||||
# Values are given in order of increasing power saving.
|
||||
# Notes:
|
||||
# - Requires an Intel Core i processor
|
||||
# - HWP.EPP requires kernel 4.10 and intel_pstate driver
|
||||
# - EPB requires kernel 5.2 or module msr and x86_energy_perf_policy
|
||||
# from linux-tools
|
||||
# - When HWP.EPP is available, EPB is not set
|
||||
# Default: balance_performance (AC), balance_power (BAT)
|
||||
|
||||
#CPU_ENERGY_PERF_POLICY_ON_AC=balance_performance
|
||||
#CPU_ENERGY_PERF_POLICY_ON_BAT=balance_power
|
||||
|
||||
# Set Intel CPU P-state performance: 0..100 (%).
|
||||
# Limit the max/min P-state to control the power dissipation of the CPU.
|
||||
# Values are stated as a percentage of the available performance.
|
||||
# Requires an Intel Core i processor with intel_pstate driver.
|
||||
# Default: <none>
|
||||
|
||||
#CPU_MIN_PERF_ON_AC=0
|
||||
#CPU_MAX_PERF_ON_AC=100
|
||||
#CPU_MIN_PERF_ON_BAT=0
|
||||
#CPU_MAX_PERF_ON_BAT=30
|
||||
|
||||
# Set the CPU "turbo boost" feature: 0=disable, 1=allow
|
||||
# Requires an Intel Core i processor.
|
||||
# Important:
|
||||
# - This may conflict with your distribution's governor settings
|
||||
# - A value of 1 does *not* activate boosting, it just allows it
|
||||
# Default: <none>
|
||||
|
||||
#CPU_BOOST_ON_AC=1
|
||||
#CPU_BOOST_ON_BAT=0
|
||||
|
||||
# Minimize number of used CPU cores/hyper-threads under light load conditions:
|
||||
# 0=disable, 1=enable.
|
||||
# Default: 0 (AC), 1 (BAT)
|
||||
|
||||
#SCHED_POWERSAVE_ON_AC=0
|
||||
#SCHED_POWERSAVE_ON_BAT=1
|
||||
|
||||
# Kernel NMI Watchdog:
|
||||
# 0=disable (default, saves power), 1=enable (for kernel debugging only).
|
||||
# Default: 0
|
||||
|
||||
#NMI_WATCHDOG=0
|
||||
|
||||
# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
|
||||
# Frequency voltage pairs are written to:
|
||||
# /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
|
||||
# CAUTION: only use this, if you thoroughly understand what you are doing!
|
||||
# Default: <none>.
|
||||
|
||||
#PHC_CONTROLS="F:V F:V F:V F:V"
|
||||
|
||||
# Disk devices; separate multiple devices with spaces.
|
||||
# Devices can be specified by disk ID also (lookup with: tlp diskid).
|
||||
# Note: DISK parameters below are effective only when this option is configured.
|
||||
# Default: "nvme0n1 sda"
|
||||
|
||||
#DISK_DEVICES="nvme0n1 sda"
|
||||
|
||||
# Disk advanced power management level: 1..254, 255 (max saving, min, off).
|
||||
# Levels 1..127 may spin down the disk; 255 allowable on most drives.
|
||||
# Separate values for multiple disks with spaces. Use the special value 'keep'
|
||||
# to keep the hardware default for the particular disk.
|
||||
# Default: 254 (AC), 128 (BAT)
|
||||
|
||||
#DISK_APM_LEVEL_ON_AC="254 254"
|
||||
#DISK_APM_LEVEL_ON_BAT="128 128"
|
||||
|
||||
# Hard disk spin down timeout:
|
||||
# 0: spin down disabled
|
||||
# 1..240: timeouts from 5s to 20min (in units of 5s)
|
||||
# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
|
||||
# See 'man hdparm' for details.
|
||||
# Separate values for multiple disks with spaces. Use the special value 'keep'
|
||||
# to keep the hardware default for the particular disk.
|
||||
# Default: <none>
|
||||
|
||||
#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
|
||||
#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
|
||||
|
||||
# Select I/O scheduler for the disk devices.
|
||||
# Multi queue (blk-mq) schedulers:
|
||||
# mq-deadline(*), none, kyber, bfq
|
||||
# Single queue schedulers:
|
||||
# deadline(*), cfq, bfq, noop
|
||||
# (*) recommended.
|
||||
# Separate values for multiple disks with spaces. Use the special value 'keep'
|
||||
# to keep the kernel default scheduler for the particular disk.
|
||||
# Notes:
|
||||
# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1'
|
||||
# and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0
|
||||
# - Single queue schedulers are legacy now and were removed together with
|
||||
# the old block layer in kernel 5.0
|
||||
# Default: keep
|
||||
|
||||
#DISK_IOSCHED="mq-deadline mq-deadline"
|
||||
|
||||
# AHCI link power management (ALPM) for disk devices:
|
||||
# min_power, med_power_with_dipm(*), medium_power, max_performance.
|
||||
# (*) Kernel >= 4.15 required, then recommended.
|
||||
# Multiple values separated with spaces are tried sequentially until success.
|
||||
# Default:
|
||||
# - "med_power_with_dipm max_performance" (AC)
|
||||
# - "med_power_with_dipm min_power" (BAT)
|
||||
|
||||
#SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
|
||||
#SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
|
||||
|
||||
# Exclude host devices from AHCI link power management.
|
||||
# Separate multiple hosts with spaces.
|
||||
# Default: <none>
|
||||
|
||||
#SATA_LINKPWR_BLACKLIST="host1"
|
||||
|
||||
# Runtime Power Management for AHCI host and disks devices:
|
||||
# on=disable, auto=enable.
|
||||
# EXPERIMENTAL ** WARNING: auto may cause system lockups/data loss.
|
||||
# Default: <none>
|
||||
|
||||
#AHCI_RUNTIME_PM_ON_AC=on
|
||||
#AHCI_RUNTIME_PM_ON_BAT=on
|
||||
|
||||
# Seconds of inactivity before disk is suspended.
|
||||
# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated.
|
||||
# Default: 15
|
||||
|
||||
#AHCI_RUNTIME_PM_TIMEOUT=15
|
||||
|
||||
# PCI Express Active State Power Management (PCIe ASPM):
|
||||
# default(*), performance, powersave, powersupersave.
|
||||
# (*) keeps BIOS ASPM defaults (recommended)
|
||||
# Default: <none>
|
||||
|
||||
#PCIE_ASPM_ON_AC=default
|
||||
#PCIE_ASPM_ON_BAT=default
|
||||
|
||||
# Set the min/max/turbo frequency for the Intel GPU.
|
||||
# Possible values depend on your hardware. For available frequencies see
|
||||
# the output of tlp-stat -g.
|
||||
# Default: <none>
|
||||
|
||||
#INTEL_GPU_MIN_FREQ_ON_AC=0
|
||||
#INTEL_GPU_MIN_FREQ_ON_BAT=0
|
||||
#INTEL_GPU_MAX_FREQ_ON_AC=0
|
||||
#INTEL_GPU_MAX_FREQ_ON_BAT=0
|
||||
#INTEL_GPU_BOOST_FREQ_ON_AC=0
|
||||
#INTEL_GPU_BOOST_FREQ_ON_BAT=0
|
||||
|
||||
# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
|
||||
# auto = mid on BAT, high on AC.
|
||||
# Default: default
|
||||
|
||||
#RADEON_POWER_PROFILE_ON_AC=default
|
||||
#RADEON_POWER_PROFILE_ON_BAT=default
|
||||
|
||||
# Radeon dynamic power management method (DPM): battery, performance.
|
||||
# Default: <none>
|
||||
|
||||
#RADEON_DPM_STATE_ON_AC=performance
|
||||
#RADEON_DPM_STATE_ON_BAT=battery
|
||||
|
||||
# Radeon DPM performance level: auto, low, high; auto is recommended.
|
||||
# Note: effective only when RADEON_DPM_STATE_ON_AC/BAT is activated.
|
||||
# Default: auto
|
||||
|
||||
#RADEON_DPM_PERF_LEVEL_ON_AC=auto
|
||||
#RADEON_DPM_PERF_LEVEL_ON_BAT=auto
|
||||
|
||||
# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
|
||||
# Default: off (AC), on (BAT)
|
||||
|
||||
#WIFI_PWR_ON_AC=off
|
||||
#WIFI_PWR_ON_BAT=on
|
||||
|
||||
# Disable wake on LAN: Y/N.
|
||||
# Default: Y
|
||||
|
||||
#WOL_DISABLE=Y
|
||||
|
||||
# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
|
||||
# A value of 0 disables, >=1 enables power saving (recommended: 1).
|
||||
# Default: 0 (AC), 1 (BAT)
|
||||
|
||||
#SOUND_POWER_SAVE_ON_AC=0
|
||||
#SOUND_POWER_SAVE_ON_BAT=1
|
||||
|
||||
# Disable controller too (HDA only): Y/N.
|
||||
# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated.
|
||||
# Default: Y
|
||||
|
||||
#SOUND_POWER_SAVE_CONTROLLER=Y
|
||||
|
||||
# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
|
||||
# Drive can be powered on again by releasing (and reinserting) the eject lever
|
||||
# or by pressing the disc eject button on newer models.
|
||||
# Note: an UltraBay/MediaBay hard disk is never powered off.
|
||||
# Default: 0
|
||||
|
||||
#BAY_POWEROFF_ON_AC=0
|
||||
#BAY_POWEROFF_ON_BAT=0
|
||||
|
||||
# Optical drive device to power off
|
||||
# Default: sr0
|
||||
|
||||
#BAY_DEVICE="sr0"
|
||||
|
||||
# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
|
||||
# Default: on (AC), auto (BAT)
|
||||
|
||||
#RUNTIME_PM_ON_AC=on
|
||||
#RUNTIME_PM_ON_BAT=auto
|
||||
|
||||
# Exclude PCI(e) device adresses the following list from Runtime PM
|
||||
# (separate with spaces). Use lspci to get the adresses (1st column).
|
||||
# Default: <none>
|
||||
|
||||
#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
|
||||
|
||||
# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
|
||||
# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
|
||||
# prevents accidential power-on of dGPU in hybrid graphics setups.
|
||||
# Separate multiple drivers with spaces.
|
||||
# Default: "amdgpu mei_me nouveau nvidia pcieport radeon", use "" to disable
|
||||
# completely.
|
||||
|
||||
#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon"
|
||||
|
||||
# Set to 0 to disable, 1 to enable USB autosuspend feature.
|
||||
# Default: 1
|
||||
|
||||
#USB_AUTOSUSPEND=1
|
||||
|
||||
# Exclude listed devices from USB autosuspend (separate with spaces).
|
||||
# Use lsusb to get the ids.
|
||||
# Note: input devices (usbhid) are excluded automatically
|
||||
# Default: <none>
|
||||
|
||||
#USB_BLACKLIST="1111:2222 3333:4444"
|
||||
|
||||
# Bluetooth devices are excluded from USB autosuspend:
|
||||
# 0=do not exclude, 1=exclude.
|
||||
# Default: 0
|
||||
|
||||
#USB_BLACKLIST_BTUSB=0
|
||||
|
||||
# Phone devices are excluded from USB autosuspend:
|
||||
# 0=do not exclude, 1=exclude (enable charging).
|
||||
# Default: 0
|
||||
|
||||
#USB_BLACKLIST_PHONE=0
|
||||
|
||||
# Printers are excluded from USB autosuspend:
|
||||
# 0=do not exclude, 1=exclude.
|
||||
# Default: 1
|
||||
|
||||
#USB_BLACKLIST_PRINTER=1
|
||||
|
||||
# WWAN devices are excluded from USB autosuspend:
|
||||
# 0=do not exclude, 1=exclude.
|
||||
# Default: 0
|
||||
|
||||
#USB_BLACKLIST_WWAN=0
|
||||
|
||||
# Include listed devices into USB autosuspend even if already excluded
|
||||
# by the blacklists above (separate with spaces). Use lsusb to get the ids.
|
||||
# Default: <none>
|
||||
|
||||
#USB_WHITELIST="1111:2222 3333:4444"
|
||||
|
||||
# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
|
||||
# Note: use as a workaround for USB devices that cause shutdown problems.
|
||||
# Default: 0
|
||||
|
||||
#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=0
|
||||
|
||||
# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
|
||||
# on system startup: 0=disable, 1=enable.
|
||||
# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
|
||||
# are ignored when this is enabled.
|
||||
# Default: 0
|
||||
|
||||
#RESTORE_DEVICE_STATE_ON_STARTUP=0
|
||||
|
||||
# Radio devices to disable on startup: bluetooth, wifi, wwan.
|
||||
# Separate multiple devices with spaces.
|
||||
# Default: <none>
|
||||
|
||||
#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
|
||||
|
||||
# Radio devices to enable on startup: bluetooth, wifi, wwan.
|
||||
# Separate multiple devices with spaces.
|
||||
# Default: <none>
|
||||
|
||||
#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
|
||||
|
||||
# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
|
||||
# Note: use as a workaround for devices that are blocking shutdown.
|
||||
# Default: <none>
|
||||
|
||||
#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
|
||||
|
||||
# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
|
||||
# (to prevent other operating systems from missing radios).
|
||||
# Default: <none>
|
||||
|
||||
#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
|
||||
|
||||
# Radio devices to enable on AC: bluetooth, wifi, wwan.
|
||||
# Default: <none>
|
||||
|
||||
#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
|
||||
|
||||
# Radio devices to disable on battery: bluetooth, wifi, wwan.
|
||||
# Default: <none>
|
||||
|
||||
#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
|
||||
|
||||
# Radio devices to disable on battery when not in use (not connected):
|
||||
# bluetooth, wifi, wwan.
|
||||
# Default: <none>
|
||||
|
||||
#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
|
||||
|
||||
# Battery charge thresholds (ThinkPad only).
|
||||
# May require external kernel module(s), refer to the output of tlp-stat -b.
|
||||
# Charging starts when the remaining capacity falls below the
|
||||
# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH
|
||||
# value.
|
||||
|
||||
# Main / Internal battery (values in %)
|
||||
# Default: <none>
|
||||
|
||||
#START_CHARGE_THRESH_BAT0=75
|
||||
#STOP_CHARGE_THRESH_BAT0=80
|
||||
|
||||
# Ultrabay / Slice / Replaceable battery (values in %)
|
||||
# Default: <none>
|
||||
|
||||
#START_CHARGE_THRESH_BAT1=75
|
||||
#STOP_CHARGE_THRESH_BAT1=80
|
||||
|
||||
# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
|
||||
# Default: 0
|
||||
|
||||
#RESTORE_THRESHOLDS_ON_BAT=1
|
||||
|
||||
# Battery feature drivers: 0=disable, 1=enable
|
||||
# Default: 1 (all)
|
||||
|
||||
#NATACPI_ENABLE=1
|
||||
#TPACPI_ENABLE=1
|
||||
#TPSMAPI_ENABLE=1
|
||||
|
||||
# ------------------------------------------------------------------------------
|
||||
# tlp-rdw - Parameters for the radio device wizard
|
||||
|
||||
# Possible devices: bluetooth, wifi, wwan.
|
||||
# Separate multiple radio devices with spaces.
|
||||
# Default: <none> (for all parameters below)
|
||||
|
||||
# Radio devices to disable on connect.
|
||||
|
||||
#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
|
||||
#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
|
||||
#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
|
||||
|
||||
# Radio devices to enable on disconnect.
|
||||
|
||||
#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
|
||||
#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
|
||||
#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
|
||||
|
||||
# Radio devices to enable/disable when docked.
|
||||
|
||||
#DEVICES_TO_ENABLE_ON_DOCK=""
|
||||
#DEVICES_TO_DISABLE_ON_DOCK=""
|
||||
|
||||
# Radio devices to enable/disable when undocked.
|
||||
|
||||
#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
|
||||
#DEVICES_TO_DISABLE_ON_UNDOCK=""
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
Section "InputClass"
|
||||
Identifier "Keyboard Layout"
|
||||
MatchIsKeyboard "yes"
|
||||
Option "XkbLayout" "fr"
|
||||
Option "XkbVariant" "oss" #acc}s aux caract}res sp{ciaux plus logique avec 'AltGr'
|
||||
EndSection
|
||||
Reference in New Issue