Merge branch 'dev' into gentoo

mail: enhance scan for new mail

.config/X11/xprofile

@@ -5,22 +5,19 @@
 # session launch
 eval $(dbus-launch --sh-syntax --exit-with-session)
 
-xss-lock -- slock &
 redshift &
 dunst &> /dev/null & #temp fix
 # MPD daemon start (if no other user instance exists)
-[ ! -s "$XDG_CONFIG_HOME/mpd/pid" ] && mpd
+[ -z "$(pidof mpd)" ] && mpd
+[ -z "$(pgrep -f sb-mpdup)" ] && sb-mpdup &
 pulsemixer --set-volume 50
 sbacklight set 3 &
 setbg &
 dwmblocks &
 xrdb "$XDG_CONFIG_HOME/X11/xresources"
 xrdb -merge "$XDG_STATE_HOME/xcolors"
-xautolock -locker slock -time 5 -corners 000- &
+xautolock -locker slock -time 5 -corners ---- &
 
-xinput set-prop 'Synaptics TM3072-003' 'libinput Tapping Enabled' 1 &
-xinput set-prop 'Synaptics TM3072-003' 'libinput Natural Scrolling Enabled' 1 &
-xinput set-prop 'Synaptics TM3072-003' 'libinput Accel Speed' 0.4 &
 setxkbmap 'fr(oss)'
 remaps &
 sxhkd &

.config/X11/xresources

@@ -1,13 +1,13 @@
 !! Set a default font and font size as below:
-*.font: Iosevka Fixed Slab:size=12
-*.symbols: Symbols Nerd Font:size=11
+*.font: Fira Code:size=12
+*.symbols: Font Awesome 5 Free:size=11
 
 /* dwm config */
 dwm.borderpx: 2
 dwm.gappx: 15
 
 /* st config */
-st.font: Iosevka Fixed Slab:size=14
-st.symbols: Symbols Nerd Font:size=14
+st.font: Fira Code:size=12
+st.symbols: Font Awesome 5 Free:size=12
 st.termname: st-256color
 st.borderpx: 5

.config/dunst/dunstrc

@@ -1,5 +1,3 @@
-# See dunst(5) for all configuration options
-
 [global]
     ### Display ###
 
@@ -19,32 +17,21 @@
     # will be ignored.
     follow = keyboard
 
-    ### Geometry ###
-
-    # dynamic width from 0 to 300
-    # width = (0, 300)
-    # constant width of 300
-    width = 450
-
-    # The maximum height of a single notification, excluding the frame.
-    height = 300
-
-    # Position the notification in the top right corner
-    origin = top-right
-
-    # Offset from the origin
-    offset = 25x47
-
-    # Scale factor. It is auto-detected if value is 0.
-    scale = 0
-
-    # Maximum number of notification (0 means no limit)
-    notification_limit = 0
-
-    ### Progress bar ###
-
-    # Turn on the progess bar. It appears when a progress hint is passed with
-    # for example dunstify -h int:value:12
+    # The geometry of the window:
+    #   [{width}]x{height}[+/-{x}+/-{y}]
+    # The geometry of the message window.
+    # The height is measured in number of notifications everything else
+    # in pixels.  If the width is omitted but the height is given
+    # ("-geometry x2"), the message window expands over the whole screen
+    # (dmenu-like).  If width is 0, the window expands to the longest
+    # message displayed.  A positive x is measured from the left, a
+    # negative from the right side of the screen.  Y is measured from
+    # the top and down respectively.
+    # The width can be negative.  In this case the actual width is the
+    # screen width minus the width defined in within the geometry option.
+    geometry = "450x300-25+47"
+
+    # Turn on the progess bar
     progress_bar = true
 
     # Set the progress bar height. This includes the frame, so make sure
@@ -61,15 +48,23 @@
     progress_bar_max_width = 300
 
 
-    # Show how many messages are currently hidden (because of
-    # notification_limit).
+    # Show how many messages are currently hidden (because of geometry).
     indicate_hidden = yes
 
+    # Shrink window if it's smaller than the width.  Will be ignored if
+    # width is 0.
+    shrink = no
+
     # The transparency of the window.  Range: [0; 100].
     # This option will only work if a compositing window manager is
-    # present (e.g. xcompmgr, compiz, etc.). (X11 only)
+    # present (e.g. xcompmgr, compiz, etc.).
     transparency = 0
 
+    # The height of the entire notification.  If the height is smaller
+    # than the font height and padding combined, it will be raised
+    # to the font height and padding.
+    notification_height = 0
+
     # Draw a line of "separator_height" pixel height between two
     # notifications.
     # Set to 0 to disable.
@@ -107,11 +102,11 @@
     # Set to 0 to disable.
     # A client can set the 'transient' hint to bypass this. See the rules
     # section for how to disable this if necessary
-    # idle_threshold = 120
+    idle_threshold = 120
 
     ### Text ###
 
-    font = Iosevka Fixed Slab 14
+    font = Fira Code 12
 
     # The spacing between lines.  If the height is smaller than the
     # font height, it will get raised to the font height.
@@ -166,7 +161,11 @@
     # Set to -1 to disable.
     show_age_threshold = -1
 
-    # Specify where to make an ellipsis in long lines.
+    # Split notifications into multiple lines if they don't fit into
+    # geometry.
+    word_wrap = yes
+
+    # When word_wrap is set to no, specify where to make an ellipsis in long lines.
     # Possible values are "start", "middle" and "end".
     ellipsize = middle
 
@@ -213,7 +212,7 @@
     dmenu = /usr/bin/dmenu -p dunst:
 
     # Browser for opening urls in context menu.
-    browser = /usr/bin/xdg-open
+    browser = /usr/bin/firefox -new-tab
 
     # Always run rule-defined scripts, even if the notification is suppressed
     always_run_script = true
@@ -224,6 +223,20 @@
     # Define the class of the windows spawned by dunst
     class = Dunst
 
+    # Print a notification on startup.
+    # This is mainly for error detection, since dbus (re-)starts dunst
+    # automatically after a crash.
+    startup_notification = false
+
+    # Manage dunst's desire for talking
+    # Can be one of the following values:
+    #  crit: Critical features. Dunst aborts
+    #  warn: Only non-fatal warnings
+    #  mesg: Important Messages
+    #  info: all unimportant stuff
+    # debug: all less than unimportant stuff
+    verbosity = mesg
+
     # Define the corner radius of the notification window
     # in pixel size. If the radius is 0, you have no rounded
     # corners.
@@ -264,14 +277,10 @@
     # Defines list of actions for each mouse event
     # Possible values are:
     # * none: Don't do anything.
-    # * do_action: Invoke the action determined by the action_name rule. If there is no
-    #              such action, open the context menu.
-    # * open_url: If the notification has exactly one url, open it. If there are multiple
-    #             ones, open the context menu.
+    # * do_action: If the notification has exactly one action, or one is marked as default,
+    #              invoke it. If there are multiple and no default, open the context menu.
     # * close_current: Close current notification.
     # * close_all: Close all notifications.
-    # * context: Open context menu for the notification.
-    # * context_all: Open context menu for all notifications.
     # These values can be strung together for each mouse event, and
     # will be executed in sequence.
     mouse_left_click = close_current
@@ -288,6 +297,32 @@
     # where there are multiple screens with very different dpi values.
     per_monitor_dpi = false
 
+# The internal keyboard shortcut support in dunst is now considered deprecated
+# and should be replaced by dunstctl calls. You can use the configuration of your
+# WM or DE to bind these to shortcuts of your choice.
+# Check the dunstctl manual page for more info.
+[shortcuts]
+
+    # Shortcuts are specified as [modifier+][modifier+]...key
+    # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
+    # "mod3" and "mod4" (windows-key).
+    # Xev might be helpful to find names for keys.
+
+    # Close notification. Equivalent dunstctl command:
+    # dunstctl close
+    # close = ctrl+space
+
+    # Close all notifications. Equivalent dunstctl command:
+    # dunstctl close-all
+    # close_all = ctrl+shift+space
+
+    # Redisplay last message(s). Equivalent dunstctl command:
+    # dunstctl history-pop
+    # history = ctrl+grave
+
+    # Context menu. Equivalent dunstctl command:
+    # dunstctl context
+    # context = ctrl+shift+period
 
 [urgency_low]
     # IMPORTANT: colors have to be defined in quotation marks.
@@ -340,7 +375,6 @@
 #    set_transient
 #    timeout
 #    urgency
-#    action_name
 #
 # Shell-like globbing will get expanded.
 #
@@ -355,6 +389,8 @@
 #   script appname summary body icon urgency
 # where urgency can be "LOW", "NORMAL" or "CRITICAL".
 #
+# NOTE: if you don't want a notification to be displayed, set the format
+# to "".
 # NOTE: It might be helpful to run dunst -print in a terminal in order
 # to find fitting options for rules.
 
@@ -393,7 +429,7 @@
 #[ignore]
 #    # This notification will not be displayed
 #    summary = "foobar"
-#    skip_display = true
+#    format = ""
 
 #[history-ignore]
 #    # This notification will not be saved in history

.config/nvim/lua/plugin/treesitter.lua

@@ -4,7 +4,7 @@
 -- Description   : treesitter config file
 
 require("nvim-treesitter.configs").setup {
-        ensure_installed = { "c", "lua", "python", "bash" },
+        ensure_installed = { "c", "lua", "python", "bash", "latex", "verilog" },
         ignore_install = { "javascript" },
         highlight = {
                 enable = true,

.config/pacman/hooks/cache_cleanup.hook

@@ -1,12 +0,0 @@
-[Trigger]
-Operation = Remove
-Operation = Install
-Operation = Upgrade
-Type = Package
-Target = *
-
-[Action]
-Description = Keep the last cache and the currently installed...
-Depends = pacman-contrib
-When = PostTransaction
-Exec = /usr/bin/paccache -rvk2

.config/pacman/hooks/dashbinsh.hook

@@ -1,11 +0,0 @@
-[Trigger]
-Type = Package
-Operation = Install
-Operation = Upgrade
-Target = bash
-
-[Action]
-Description = Re-pointing /bin/sh symlink to dash...
-When = PostTransaction
-Exec = /usr/bin/ln -sfT dash /usr/bin/sh
-Depends = dash

.config/pacman/hooks/pkglist.hook

@@ -1,10 +0,0 @@
-[Trigger]
-Operation = Remove
-Operation = Install
-Type = Package
-Target = *
-
-[Action]
-Description = Update the pkglist...
-When = PostTransaction
-Exec = /bin/sh -c '/usr/bin/pacman -Qqe > /home/swytch/.config/paru/pkglist.txt'

.config/paru/paru.conf

@@ -1,29 +0,0 @@
-#
-# $PARU_CONF
-# /etc/paru.conf
-# ~/.config/paru/paru.conf
-#
-# See the paru.conf(5) manpage for options
-
-#
-# GENERAL OPTIONS
-#
-[options]
-PgpFetch
-Devel
-Provides
-DevelSuffixes = -git -cvs -svn -bzr -darcs -always
-BottomUp
-RemoveMake
-SudoLoop
-#UseAsk
-#CombinedUpgrade
-#CleanAfter
-#UpgradeMenu
-NewsOnUpgrade
-
-#
-# Binary OPTIONS
-#
-#[bin]
-#FileManager = vifm

.config/paru/pkglist.txt

@@ -1,110 +0,0 @@
-abcde
-abook
-adobe-source-han-sans-cn-fonts
-adobe-source-han-sans-jp-fonts
-alsa-plugins
-alsa-utils
-android-tools
-android-udev
-arandr
-autoconf
-automake
-autorandr
-base
-beets
-binutils
-bison
-capitaine-cursors
-cdparanoia
-clang
-cmake
-cronie
-dash
-dunst
-efibootmgr
-fakeroot
-file
-findutils
-firefox
-flex
-gawk
-gcc
-gettext
-git
-grep
-groff
-grub
-gsasl
-gzip
-htop
-imagemagick
-isync
-iwd
-jedi-language-server
-libnotify
-libtool
-linux
-linux-firmware
-linux-lts
-lynx
-m4
-make
-man-db
-mpc
-mpd
-mpv
-msmtp
-ncmpcpp
-neomutt
-ninja
-nnn
-notmuch
-pacman
-pacman-contrib
-pam-gnupg
-paru
-pass
-patch
-pkgconf
-pulseaudio-alsa
-pulsemixer
-python-eyed3
-python-requests
-redshift
-sed
-shotgun
-sox
-sudo
-sxhkd
-sxiv
-texinfo
-texlab
-texlive-bibtexextra
-texlive-core
-texlive-latexextra
-transmission-cli
-tree-sitter
-tremc
-ttf-dejavu
-ttf-fira-sans
-ttf-iosevka-fixed-slab
-ttf-nerd-fonts-symbols-mono
-unzip
-upower
-usbutils
-which
-xcape
-xclip
-xf86-video-intel
-xorg-server
-xorg-xinit
-xorg-xinput
-xorg-xsetroot
-xss-lock
-xwallpaper
-zathura
-zathura-pdf-mupdf
-zip
-zsh
-zsh-history-substring-search
-zsh-syntax-highlighting

.config/root/etc_default_grub

@@ -1,55 +0,0 @@
-# GRUB boot loader configuration
-
-GRUB_DEFAULT="2"
-GRUB_TIMEOUT=5
-GRUB_DISTRIBUTOR="Arch"
-GRUB_CMDLINE_LINUX_DEFAULT="quiet i915.enable_fbc=0"
-GRUB_CMDLINE_LINUX=""
-GRUB_DISABLE_SUBMENU=y
-
-# Preload both GPT and MBR modules so that they are not missed
-GRUB_PRELOAD_MODULES="part_gpt part_msdos"
-
-# Uncomment to enable booting from LUKS encrypted devices
-#GRUB_ENABLE_CRYPTODISK=y
-
-# Uncomment to enable Hidden Menu, and optionally hide the timeout count
-#GRUB_HIDDEN_TIMEOUT=5
-#GRUB_HIDDEN_TIMEOUT_QUIET=true
-
-# Uncomment to use basic console
-GRUB_TERMINAL_INPUT=console
-
-# Uncomment to disable graphical terminal
-#GRUB_TERMINAL_OUTPUT=console
-
-# The resolution used on graphical terminal
-# note that you can use only modes which your graphic card supports via VBE
-# you can see them in real GRUB with the command `vbeinfo'
-GRUB_GFXMODE=auto
-
-# Uncomment to allow the kernel use the same resolution used by grub
-GRUB_GFXPAYLOAD_LINUX=keep
-
-# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
-# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
-#GRUB_DISABLE_LINUX_UUID=true
-
-# Uncomment to disable generation of recovery mode menu entries
-GRUB_DISABLE_RECOVERY=true
-
-# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
-# modes only.  Entries specified as foreground/background.
-#GRUB_COLOR_NORMAL="light-blue/black"
-#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
-
-# Uncomment one of them for the gfx desired, a image background or a gfxtheme
-#GRUB_BACKGROUND="/path/to/wallpaper"
-#GRUB_THEME="/path/to/gfxtheme"
-
-# Uncomment to get a beep at GRUB start
-#GRUB_INIT_TUNE="480 440 1"
-
-# Uncomment to make GRUB remember the last selection. This requires to
-# set 'GRUB_DEFAULT=saved' above.
-#GRUB_SAVEDEFAULT="true"

.config/root/etc_pacman.conf

@@ -1,101 +0,0 @@
-#
-# /etc/pacman.conf
-#
-# See the pacman.conf(5) manpage for option and repository directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-# The following paths are commented out with their default values listed.
-# If you wish to use different paths, uncomment and update the paths.
-#RootDir     = /
-#DBPath      = /var/lib/pacman/
-#CacheDir    = /var/cache/pacman/pkg/
-#LogFile     = /var/log/pacman.log
-#GPGDir      = /etc/pacman.d/gnupg/
-HookDir     = /home/swytch/.config/pacman/hooks
-HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-#CleanMethod = KeepInstalled
-#UseDelta    = 0.7
-Architecture = auto
-
-# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
-#IgnorePkg   =
-#IgnoreGroup =
-
-#NoUpgrade   =
-#NoExtract   =
-
-# Misc options
-#UseSyslog
-Color
-TotalDownload
-CheckSpace
-VerbosePkgLists
-
-# By default, pacman accepts packages signed by keys that its local keyring
-# trusts (see pacman-key and its man page), as well as unsigned packages.
-SigLevel    = Required DatabaseOptional
-LocalFileSigLevel = Optional
-#RemoteFileSigLevel = Required
-
-# NOTE: You must run `pacman-key --init` before first using pacman; the local
-# keyring can then be populated with the keys of all official Arch Linux
-# packagers with `pacman-key --populate archlinux`.
-
-#
-# REPOSITORIES
-#   - can be defined here or included from another file
-#   - pacman will search repositories in the order defined here
-#   - local/custom mirrors can be added here or in separate files
-#   - repositories listed first will take precedence when packages
-#     have identical names, regardless of version number
-#   - URLs will have $repo replaced by the name of the current repo
-#   - URLs will have $arch replaced by the name of the architecture
-#
-# Repository entries are of the format:
-#       [repo-name]
-#       Server = ServerName
-#       Include = IncludePath
-#
-# The header [repo-name] is crucial - it must be present and
-# uncommented to enable the repo.
-#
-
-# The testing repositories are disabled by default. To enable, uncomment the
-# repo name header and Include lines. You can add preferred servers immediately
-# after the header, and they will be used before the default mirrors.
-
-#[testing]
-#Include = /etc/pacman.d/mirrorlist
-
-[core]
-Include = /etc/pacman.d/mirrorlist
-
-[extra]
-Include = /etc/pacman.d/mirrorlist
-
-#[community-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-[community]
-Include = /etc/pacman.d/mirrorlist
-
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the multilib repositories as required here.
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist
-
-# An example of a custom package repository.  See the pacman manpage for
-# tips on creating your own repositories.
-#[custom]
-#SigLevel = Optional TrustAll
-#Server = file:///home/custompkgs
-

.config/root/etc_tlp.conf

@@ -1,473 +0,0 @@
-# ------------------------------------------------------------------------------
-# /etc/tlp.conf - TLP user configuration
-# See full explanation: https://linrunner.de/en/tlp/docs/tlp-configuration.html
-#
-# New configuration scheme (TLP 1.3). Settings are read in the following order:
-
-# 1. Intrinsic defaults
-# 2. /etc/tlp.d/*.conf - Drop-in customization snippets
-# 3. /etc/tlp.conf     - User configuration (this file)
-#
-# Notes:
-# - In case of identical parameters, the last occurence has precedence
-# - This also means, parameters enabled here will override anything else
-# - IMPORTANT: all parameters here are disabled, remove the leading '#'
-#   to enable them; shown values may be suggestions rather than defaults
-# - Default *: intrinsic default that is effective when the parameter is missing
-#     or disabled by a leading '#'; use PARAM="" to disable an intrinsic default
-# - Default <none>: do nothing or use kernel/hardware defaults
-
-# ------------------------------------------------------------------------------
-# tlp - Parameters for power saving
-
-# Set to 0 to disable, 1 to enable TLP.
-# Default: 1
-
-#TLP_ENABLE=1
-
-# Operation mode when no power supply can be detected: AC, BAT.
-# Concerns some desktop and embedded hardware only.
-# Default: <none>
-
-#TLP_DEFAULT_MODE=AC
-
-# Operation mode select: 0=depend on power source, 1=always use TLP_DEFAULT_MODE
-# Note: use in conjunction with TLP_DEFAULT_MODE=BAT for BAT settings on AC.
-# Default: 0
-
-#TLP_PERSISTENT_DEFAULT=0
-
-# Power supply class to ignore when determining operation mode: AC, BAT.
-# Note: try on laptops where operation mode AC/BAT is incorrectly detected.
-# Default: <none>
-
-#TLP_PS_IGNORE=BAT
-
-# Seconds laptop mode has to wait after the disk goes idle before doing a sync.
-# Non-zero value enables, zero disables laptop mode.
-# Default: 0 (AC), 2 (BAT)
-
-#DISK_IDLE_SECS_ON_AC=0
-#DISK_IDLE_SECS_ON_BAT=2
-
-# Dirty page values (timeouts in secs).
-# Default: 15 (AC), 60 (BAT)
-
-#MAX_LOST_WORK_SECS_ON_AC=15
-#MAX_LOST_WORK_SECS_ON_BAT=60
-
-# Note: CPU parameters below are disabled by default, remove the leading #
-# to enable them, otherwise kernel defaults will be used.
-#
-# Select a CPU frequency scaling governor.
-# Intel Core i processor with intel_pstate driver:
-#   powersave(*), performance.
-# Other hardware with acpi-cpufreq driver:
-#   ondemand(*), powersave, performance, conservative, schedutil.
-# (*) is recommended.
-# Use tlp-stat -p to show the active driver and available governors.
-# Important:
-#   powersave for intel_pstate and ondemand for acpi-cpufreq are power
-#   efficient for *almost all* workloads and therefore kernel and most
-#   distributions have chosen them as defaults. If you still want to change,
-#   you should know what you're doing!
-# Default: <none>
-
-#CPU_SCALING_GOVERNOR_ON_AC=powersave
-#CPU_SCALING_GOVERNOR_ON_BAT=powersave
-
-# Set the min/max frequency available for the scaling governor.
-# Possible values depend on your CPU. For available frequencies see
-# the output of tlp-stat -p.
-# Default: <none>
-
-#CPU_SCALING_MIN_FREQ_ON_AC=0
-#CPU_SCALING_MAX_FREQ_ON_AC=0
-#CPU_SCALING_MIN_FREQ_ON_BAT=0
-#CPU_SCALING_MAX_FREQ_ON_BAT=0
-
-# Set Intel CPU energy/performance policies HWP.EPP and EPB:
-#   performance, balance_performance, default, balance_power, power
-# Values are given in order of increasing power saving.
-# Notes:
-# - Requires an Intel Core i processor
-# - HWP.EPP requires kernel 4.10 and intel_pstate driver
-# - EPB requires kernel 5.2 or module msr and x86_energy_perf_policy
-#   from linux-tools
-# - When HWP.EPP is available, EPB is not set
-# Default: balance_performance (AC), balance_power (BAT)
-
-#CPU_ENERGY_PERF_POLICY_ON_AC=balance_performance
-#CPU_ENERGY_PERF_POLICY_ON_BAT=balance_power
-
-# Set Intel CPU P-state performance: 0..100 (%).
-# Limit the max/min P-state to control the power dissipation of the CPU.
-# Values are stated as a percentage of the available performance.
-# Requires an Intel Core i processor with intel_pstate driver.
-# Default: <none>
-
-#CPU_MIN_PERF_ON_AC=0
-#CPU_MAX_PERF_ON_AC=100
-#CPU_MIN_PERF_ON_BAT=0
-#CPU_MAX_PERF_ON_BAT=30
-
-# Set the CPU "turbo boost" feature: 0=disable, 1=allow
-# Requires an Intel Core i processor.
-# Important:
-# - This may conflict with your distribution's governor settings
-# - A value of 1 does *not* activate boosting, it just allows it
-# Default: <none>
-
-#CPU_BOOST_ON_AC=1
-#CPU_BOOST_ON_BAT=0
-
-# Minimize number of used CPU cores/hyper-threads under light load conditions:
-#   0=disable, 1=enable.
-# Default: 0 (AC), 1 (BAT)
-
-#SCHED_POWERSAVE_ON_AC=0
-#SCHED_POWERSAVE_ON_BAT=1
-
-# Kernel NMI Watchdog:
-#   0=disable (default, saves power), 1=enable (for kernel debugging only).
-# Default: 0
-
-#NMI_WATCHDOG=0
-
-# Change CPU voltages aka "undervolting" - Kernel with PHC patch required.
-# Frequency voltage pairs are written to:
-#   /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
-# CAUTION: only use this, if you thoroughly understand what you are doing!
-# Default: <none>.
-
-#PHC_CONTROLS="F:V F:V F:V F:V"
-
-# Disk devices; separate multiple devices with spaces.
-# Devices can be specified by disk ID also (lookup with: tlp diskid).
-# Note: DISK parameters below are effective only when this option is configured.
-# Default: "nvme0n1 sda"
-
-#DISK_DEVICES="nvme0n1 sda"
-
-# Disk advanced power management level: 1..254, 255 (max saving, min, off).
-# Levels 1..127 may spin down the disk; 255 allowable on most drives.
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the hardware default for the particular disk.
-# Default: 254 (AC), 128 (BAT)
-
-#DISK_APM_LEVEL_ON_AC="254 254"
-#DISK_APM_LEVEL_ON_BAT="128 128"
-
-# Hard disk spin down timeout:
-#   0:        spin down disabled
-#   1..240:   timeouts from 5s to 20min (in units of 5s)
-#   241..251: timeouts from 30min to 5.5 hours (in units of 30min)
-# See 'man hdparm' for details.
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the hardware default for the particular disk.
-# Default: <none>
-
-#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
-#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
-
-# Select I/O scheduler for the disk devices.
-# Multi queue (blk-mq) schedulers:
-#   mq-deadline(*), none, kyber, bfq
-# Single queue schedulers:
-#   deadline(*), cfq, bfq, noop
-# (*) recommended.
-# Separate values for multiple disks with spaces. Use the special value 'keep'
-# to keep the kernel default scheduler for the particular disk.
-# Notes:
-# - Multi queue (blk-mq) may need kernel boot option 'scsi_mod.use_blk_mq=1'
-#   and 'modprobe mq-deadline-iosched|kyber|bfq' on kernels < 5.0
-# - Single queue schedulers are legacy now and were removed together with
-#   the old block layer in kernel 5.0
-# Default: keep
-
-#DISK_IOSCHED="mq-deadline mq-deadline"
-
-# AHCI link power management (ALPM) for disk devices:
-#   min_power, med_power_with_dipm(*), medium_power, max_performance.
-# (*) Kernel >= 4.15 required, then recommended.
-# Multiple values separated with spaces are tried sequentially until success.
-# Default:
-#  - "med_power_with_dipm max_performance" (AC)
-#  - "med_power_with_dipm min_power" (BAT)
-
-#SATA_LINKPWR_ON_AC="med_power_with_dipm max_performance"
-#SATA_LINKPWR_ON_BAT="med_power_with_dipm min_power"
-
-# Exclude host devices from AHCI link power management.
-# Separate multiple hosts with spaces.
-# Default: <none>
-
-#SATA_LINKPWR_BLACKLIST="host1"
-
-# Runtime Power Management for AHCI host and disks devices:
-#   on=disable, auto=enable.
-# EXPERIMENTAL ** WARNING: auto may cause system lockups/data loss.
-# Default: <none>
-
-#AHCI_RUNTIME_PM_ON_AC=on
-#AHCI_RUNTIME_PM_ON_BAT=on
-
-# Seconds of inactivity before disk is suspended.
-# Note: effective only when AHCI_RUNTIME_PM_ON_AC/BAT is activated.
-# Default: 15
-
-#AHCI_RUNTIME_PM_TIMEOUT=15
-
-# PCI Express Active State Power Management (PCIe ASPM):
-#   default(*), performance, powersave, powersupersave.
-# (*) keeps BIOS ASPM defaults (recommended)
-# Default: <none>
-
-#PCIE_ASPM_ON_AC=default
-#PCIE_ASPM_ON_BAT=default
-
-# Set the min/max/turbo frequency for the Intel GPU.
-# Possible values depend on your hardware. For available frequencies see
-# the output of tlp-stat -g.
-# Default: <none>
-
-#INTEL_GPU_MIN_FREQ_ON_AC=0
-#INTEL_GPU_MIN_FREQ_ON_BAT=0
-#INTEL_GPU_MAX_FREQ_ON_AC=0
-#INTEL_GPU_MAX_FREQ_ON_BAT=0
-#INTEL_GPU_BOOST_FREQ_ON_AC=0
-#INTEL_GPU_BOOST_FREQ_ON_BAT=0
-
-# Radeon graphics clock speed (profile method): low, mid, high, auto, default;
-# auto = mid on BAT, high on AC.
-# Default: default
-
-#RADEON_POWER_PROFILE_ON_AC=default
-#RADEON_POWER_PROFILE_ON_BAT=default
-
-# Radeon dynamic power management method (DPM): battery, performance.
-# Default: <none>
-
-#RADEON_DPM_STATE_ON_AC=performance
-#RADEON_DPM_STATE_ON_BAT=battery
-
-# Radeon DPM performance level: auto, low, high; auto is recommended.
-# Note: effective only when RADEON_DPM_STATE_ON_AC/BAT is activated.
-# Default: auto
-
-#RADEON_DPM_PERF_LEVEL_ON_AC=auto
-#RADEON_DPM_PERF_LEVEL_ON_BAT=auto
-
-# WiFi power saving mode: on=enable, off=disable; not supported by all adapters.
-# Default: off (AC), on (BAT)
-
-#WIFI_PWR_ON_AC=off
-#WIFI_PWR_ON_BAT=on
-
-# Disable wake on LAN: Y/N.
-# Default: Y
-
-#WOL_DISABLE=Y
-
-# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
-# A value of 0 disables, >=1 enables power saving (recommended: 1).
-# Default: 0 (AC), 1 (BAT)
-
-#SOUND_POWER_SAVE_ON_AC=0
-#SOUND_POWER_SAVE_ON_BAT=1
-
-# Disable controller too (HDA only): Y/N.
-# Note: effective only when SOUND_POWER_SAVE_ON_AC/BAT is activated.
-# Default: Y
-
-#SOUND_POWER_SAVE_CONTROLLER=Y
-
-# Power off optical drive in UltraBay/MediaBay: 0=disable, 1=enable.
-# Drive can be powered on again by releasing (and reinserting) the eject lever
-# or by pressing the disc eject button on newer models.
-# Note: an UltraBay/MediaBay hard disk is never powered off.
-# Default: 0
-
-#BAY_POWEROFF_ON_AC=0
-#BAY_POWEROFF_ON_BAT=0
-
-# Optical drive device to power off
-# Default: sr0
-
-#BAY_DEVICE="sr0"
-
-# Runtime Power Management for PCI(e) bus devices: on=disable, auto=enable.
-# Default: on (AC), auto (BAT)
-
-#RUNTIME_PM_ON_AC=on
-#RUNTIME_PM_ON_BAT=auto
-
-# Exclude PCI(e) device adresses the following list from Runtime PM
-# (separate with spaces). Use lspci to get the adresses (1st column).
-# Default: <none>
-
-#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
-
-# Exclude PCI(e) devices assigned to the listed drivers from Runtime PM.
-# Default when unconfigured is "amdgpu nouveau nvidia radeon" which
-# prevents accidential power-on of dGPU in hybrid graphics setups.
-# Separate multiple drivers with spaces.
-# Default: "amdgpu mei_me nouveau nvidia pcieport radeon", use "" to disable
-# completely.
-
-#RUNTIME_PM_DRIVER_BLACKLIST="amdgpu mei_me nouveau nvidia pcieport radeon"
-
-# Set to 0 to disable, 1 to enable USB autosuspend feature.
-# Default: 1
-
-#USB_AUTOSUSPEND=1
-
-# Exclude listed devices from USB autosuspend (separate with spaces).
-# Use lsusb to get the ids.
-# Note: input devices (usbhid) are excluded automatically
-# Default: <none>
-
-#USB_BLACKLIST="1111:2222 3333:4444"
-
-# Bluetooth devices are excluded from USB autosuspend:
-#   0=do not exclude, 1=exclude.
-# Default: 0
-
-#USB_BLACKLIST_BTUSB=0
-
-# Phone devices are excluded from USB autosuspend:
-#   0=do not exclude, 1=exclude (enable charging).
-# Default: 0
-
-#USB_BLACKLIST_PHONE=0
-
-# Printers are excluded from USB autosuspend:
-#   0=do not exclude, 1=exclude.
-# Default: 1
-
-#USB_BLACKLIST_PRINTER=1
-
-# WWAN devices are excluded from USB autosuspend:
-#   0=do not exclude, 1=exclude.
-# Default: 0
-
-#USB_BLACKLIST_WWAN=0
-
-# Include listed devices into USB autosuspend even if already excluded
-# by the blacklists above (separate with spaces). Use lsusb to get the ids.
-# Default: <none>
-
-#USB_WHITELIST="1111:2222 3333:4444"
-
-# Set to 1 to disable autosuspend before shutdown, 0 to do nothing
-# Note: use as a workaround for USB devices that cause shutdown problems.
-# Default: 0
-
-#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=0
-
-# Restore radio device state (Bluetooth, WiFi, WWAN) from previous shutdown
-# on system startup: 0=disable, 1=enable.
-# Note: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
-#   are ignored when this is enabled.
-# Default: 0
-
-#RESTORE_DEVICE_STATE_ON_STARTUP=0
-
-# Radio devices to disable on startup: bluetooth, wifi, wwan.
-# Separate multiple devices with spaces.
-# Default: <none>
-
-#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
-
-# Radio devices to enable on startup: bluetooth, wifi, wwan.
-# Separate multiple devices with spaces.
-# Default: <none>
-
-#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
-
-# Radio devices to disable on shutdown: bluetooth, wifi, wwan.
-# Note: use as a workaround for devices that are blocking shutdown.
-# Default: <none>
-
-#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
-
-# Radio devices to enable on shutdown: bluetooth, wifi, wwan.
-# (to prevent other operating systems from missing radios).
-# Default: <none>
-
-#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
-
-# Radio devices to enable on AC: bluetooth, wifi, wwan.
-# Default: <none>
-
-#DEVICES_TO_ENABLE_ON_AC="bluetooth wifi wwan"
-
-# Radio devices to disable on battery: bluetooth, wifi, wwan.
-# Default: <none>
-
-#DEVICES_TO_DISABLE_ON_BAT="bluetooth wifi wwan"
-
-# Radio devices to disable on battery when not in use (not connected):
-#   bluetooth, wifi, wwan.
-# Default: <none>
-
-#DEVICES_TO_DISABLE_ON_BAT_NOT_IN_USE="bluetooth wifi wwan"
-
-# Battery charge thresholds (ThinkPad only).
-# May require external kernel module(s), refer to the output of tlp-stat -b.
-# Charging starts when the remaining capacity falls below the
-# START_CHARGE_THRESH value and stops when exceeding the STOP_CHARGE_THRESH
-# value.
-
-# Main / Internal battery (values in %)
-# Default: <none>
-
-#START_CHARGE_THRESH_BAT0=75
-#STOP_CHARGE_THRESH_BAT0=80
-
-# Ultrabay / Slice / Replaceable battery (values in %)
-# Default: <none>
-
-#START_CHARGE_THRESH_BAT1=75
-#STOP_CHARGE_THRESH_BAT1=80
-
-# Restore charge thresholds when AC is unplugged: 0=disable, 1=enable.
-# Default: 0
-
-#RESTORE_THRESHOLDS_ON_BAT=1
-
-# Battery feature drivers: 0=disable, 1=enable
-# Default: 1 (all)
-
-#NATACPI_ENABLE=1
-#TPACPI_ENABLE=1
-#TPSMAPI_ENABLE=1
-
-# ------------------------------------------------------------------------------
-# tlp-rdw - Parameters for the radio device wizard
-
-# Possible devices: bluetooth, wifi, wwan.
-# Separate multiple radio devices with spaces.
-# Default: <none> (for all parameters below)
-
-# Radio devices to disable on connect.
-
-#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
-#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
-#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
-
-# Radio devices to enable on disconnect.
-
-#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
-#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
-#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
-
-# Radio devices to enable/disable when docked.
-
-#DEVICES_TO_ENABLE_ON_DOCK=""
-#DEVICES_TO_DISABLE_ON_DOCK=""
-
-# Radio devices to enable/disable when undocked.
-
-#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
-#DEVICES_TO_DISABLE_ON_UNDOCK=""

.config/root/etc_x11_xorg.conf.d/00-keyboard.conf

@@ -1,6 +0,0 @@
-Section "InputClass"
-	Identifier	"Keyboard Layout"
-	MatchIsKeyboard	"yes"
-	Option		"XkbLayout"	"fr"
-	Option		"XkbVariant"	"oss" #acc}s aux caract}res sp{ciaux plus logique avec 'AltGr'
-EndSection

.config/sxhkd/sxhkdrc

@@ -2,12 +2,13 @@
 
 # System stuff
 
-super + F1
+XF86AudioMute
 		pulsemixer --toggle-mute; audio-notify
-super + {F2, F3}
+
+{XF86AudioLowerVolume, XF86AudioRaiseVolume}
 		pulsemixer --change-volume {-5, +5}; audio-notify
 
-super + {F5, F6}
+{XF86MonBrightnessDown, XF86MonBrightnessUp}
 		sbacklight {dec,inc}
 
 super + u
@@ -17,20 +18,17 @@ super + shift + u
 		dmenuumount
 
 super + s
-		dmenuprompt "suspend?" "systemctl suspend"
+		dmenuprompt "suspend?" "loginctl suspend"
 
 super + shift + s
-		dmenuprompt "shutdown?" "shutdown -h now"
+		dmenuprompt "shutdown?" "loginctl poweroff"
 
 super + shift + r
-		dmenuprompt "reboot?" "reboot"
+		dmenuprompt "reboot?" "loginctl reboot"
 
 super + shift + d
 		displayselect
 
-super + F9
-		kbacklight
-
 super + shift + o
 		dmenuopen
 

.config/zsh/.zprofile

@@ -3,6 +3,9 @@
 # This file is sourced when launching a DM from startx/xinit
 
 # environment variables
+## path
+export PATH="$(find $HOME/.local/bin -type d | tr '\n' ':' | sed 's/:$//'):$PATH"
+
 ## custom paths
 export DOTFILES="$HOME/.dotfiles.git"
 export LATEX_RESOURCES="$HOME/documents/latex"
@@ -25,13 +28,11 @@ export COQBIN="$OPAMROOT/default/bin/"
 export NPM_CONFIG_USERCONFIG="$XDG_CONFIG_HOME/npm/npmrc"
 
 ## default programs
-export SUDO_ASKPASS="$HOME/.local/bin/dmenupass"
 export GPG_ASKPASS="/usr/bin/pinentry-curses"
-export SUDO_EDITOR="nvim"
 export EDITOR="nvim"
 export TERMINAL="st"
 export READER="zathura"
-export BROWSER="firefox"
+export BROWSER="firefox-bin"
 export IRC_CLIENT="irssi"
 export MAIL_CLIENT="neomutt"
 export MUSIC_CLIENT="ncmpcpp"

.config/zsh/.zshrc

@@ -71,10 +71,10 @@ precmd_dunctions() { zle-line-init ;} # Use beam shape cursor for each new promp
 [ -f "$HOME/.config/aliasrc" ] && source "$HOME/.config/aliasrc"
 
 # Load zsh-history-search
-source /usr/share/zsh/plugins/zsh-history-substring-search/zsh-history-substring-search.zsh 2>/dev/null
+source $HOME/.local/src/zsh-history-substring-search/zsh-history-substring-search.zsh 2> /dev/null
 
 # Load zsh-syntax-highlighting
-source /usr/share/zsh/plugins/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh 2>/dev/null
+source $HOME/.local/src/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh 2>/dev/null
 typeset -A ZSH_HIGHLIGHT_STYLES
 ZSH_HIGHLIGHT_STYLES[alias]='fg=green,bold'
 ZSH_HIGHLIGHT_STYLES[path]='fg=magenta,bold'

.local/bin/fetch

@@ -13,11 +13,12 @@
 ## INFO
 
 # $USER is already defined
-host="$(cat /etc/hostname)"
-os='Arch Linux'
+host="$(cat /etc/conf.d/hostname | awk -F'"' '{ printf $2 }')"
+machine="$(cat /sys/devices/virtual/dmi/id/product_version)"
+os='Gentoo'
 kernel="$(uname -sr)"
 uptime="$(uptime -p | sed 's/up //')"
-packages="$(pacman -Q | wc -l)"
+packages="$(printf '%s\n' /var/db/pkg/*/* | wc -l)"
 shell="$($SHELL --version | sed -e 's/(.*)//')"
 wm="$(tail -n 1 "$XDG_CONFIG_HOME/X11/xinitrc" | rev | cut -d ' ' -f 1 | rev)"
 
@@ -61,20 +62,21 @@ if [ -x "$(command -v tput)" ]; then
 fi
 
 # you can change these
-lc="${bold}${green}"                # labels
-nc="${bold}${red}"                  # user and hostname
-ic="${white}"                       # info
-a0="${blue}"                        # first arch color
-a1="${cyan}"                        # second arch color
+lc="${reset}${magenta}"                  # labels
+nc="${bold}${magenta}"                  # user and hostname
+ic="${reset}${white}"                   # info
+a0="${bold}${magenta}"                  # first arch color
+a1="${bold}${white}"                    # second arch color
 
 cat <<EOF
-${a0}                   ${nc}${USER}${ic}@${nc}${host}
-${a0}         /\\        ${lc}OS:        ${ic}${os}
-${a0}        /  \\       ${lc}KERNEL:    ${ic}${kernel}
-${a0}       /\\   \\      ${lc}SHELL:     ${ic}${shell}
-${a1}      /      \\     ${lc}WM:        ${ic}${wm}
-${a1}     /   ,,   \\    ${lc}UPTIME:    ${ic}${uptime}
-${a1}    /   |  |  -\\   ${lc}PACKAGES:  ${ic}${packages}
-${a1}   /_-''    ''-_\\  ${lc}MEMORY:    ${ic}${mem_used}MiB/${mem_total}MiB
+${a0}                 ${nc}${USER}${ic}@${nc}${host}
+${a0}    _-----_      ${lc}machine:   ${ic}${machine}
+${a0}   (       \\     ${lc}os:        ${ic}${os}
+${a0}   \\    0   \\    ${lc}kernel:    ${ic}${kernel}
+${a1}    \\        )   ${lc}shell:     ${ic}${shell}
+${a1}    /      _/    ${lc}wm:        ${ic}${wm}
+${a1}   (     _-      ${lc}uptime:    ${ic}${uptime}
+${a1}   \\____-        ${lc}packages:  ${ic}${packages} (portage)
+                 ${lc}memory:    ${ic}${mem_used}MiB/${mem_total}MiB
 
 EOF

.local/bin/mailsync

@@ -30,17 +30,17 @@ export GPG_TTY=$TTY
 [ -n "$MBSYNCRC" ] && alias mbsync="mbsync -c $MBSYNCRC" || MBSYNCRC="$HOME/.mbsyncrc"
 
 notify() {
-	notify-send "neomutt" " $2 new mail(s) in \`$1\` account."
+	notify-send "neomutt" " $2 new mail(s) in \`$1\` account."
 }
 messageinfo() {
-	notify-send " $from:" "$subject"
+	notify-send "$from:" "$subject"
 }
 
 # Check account for new mail. Notify if there is new content.
 syncandnotify() {
     acc="$(echo "$account" | sed "s/.*\///")"
     mbsync "$acc"
-	new="$(find "${XDG_DATA_HOME:-$HOME/.local/share}"/mail/$acc/[Ii][Nn][Bb][Oo][Xx]/new/* -type f -newer "${XDG_CONFIG_HOME:-$HOME/.config}/mutt/.mailsynclastrun" 2>/dev/null)"
+	new="$(find "${XDG_DATA_HOME:-$HOME/.local/share}"/mail/$acc/*/new/ -type f -newer "${XDG_CONFIG_HOME:-$HOME/.config}/mutt/.mailsynclastrun" | grep -iv "trash" 2>/dev/null)"
     newcount=$(echo "$new" | sed '/^\s*$/d' | wc -l)
     if [ "$newcount" -gt "0" ]; then
         for file in $new; do

.local/bin/statusbar/sb-battery

@@ -32,6 +32,7 @@ notify() { \
 	esac
 	}
 
+total=0
 for bat in /sys/class/power_supply/BAT?/
 do
 	status="$(cat "$bat/status")"

.local/bin/statusbar/sb-internet

@@ -16,9 +16,9 @@ state="$(wpa_cli status | grep -i ^wpa_state | sed -e 's/.*=//')"
 [ "COMPLETED" = $state ] && str="$(printf " %s" $ssid)" || str="$(printf "  ---")"
 eth="$(cat /sys/class/net/enp0s31f6/operstate)"
 if [ "up" = "$eth" ]; then
-	str="$(printf "%s /  " "$str")"
+	str="$(printf "%s /  " "$str")"
 fi
 vpn="$(pidof openvpn)"
-[ -n "$vpn" ] && str="$(printf "() %s" "$str")"
+[ -n "$vpn" ] && str="$(printf "%s ()" "$str")"
 
 printf " %s " "$str"

.local/bin/statusbar/sb-mailbox

@@ -13,9 +13,9 @@
 unread=""
 for acc in $(ls "${XDG_DATA_HOME:-$HOME/.local/share}"/mail/)
 do
-	new="$(find "${XDG_DATA_HOME:-$HOME/.local/share}"/mail/$acc/[Ii][Nn][Bb][Oo][Xx]/new/* -type f | wc -l 2>/dev/null)"
+	new="$(find "${XDG_DATA_HOME:-$HOME/.local/share}"/mail/$acc/*/new/ -type f | grep -iv "trash" | wc -l 2>/dev/null)"
 	if [ $new -gt 0 ]; then
-		[ -n "$(echo "$acc" | sed -n '/@etu/p')" ] && box=""
+		[ -n "$(echo "$acc" | sed -n '/@ens/p')" ] && box=""
 		[ -n "$(echo "$acc" | sed -n '/@mailo/p')" ] && box=""
 		[ -n "$(echo "$acc" | sed -n '/@posteo/p')" ] && box=""
 		unread="$unread/$box$new"
@@ -23,4 +23,4 @@ do
 done