add email link in admin list

.browserslistrc

@@ -0,0 +1,7 @@
+[production]
+defaults
+not IE 11
+not dead
+
+[development]
+supports es6-module

.circleci/config.yml

@@ -133,6 +133,12 @@ jobs:
       - run:
           command: ./bin/rails tests:migrations:populate_v2_4
           name: Populate database with test data
+      - run:
+          command: ./bin/rails db:migrate VERSION=20180707154237
+          name: Run migrations up to v2.4.3
+      - run:
+          command: ./bin/rails tests:migrations:populate_v2_4_3
+          name: Populate database with test data
       - run:
           command: ./bin/rails db:migrate
           name: Run all remaining migrations
@@ -167,14 +173,22 @@ jobs:
       - run:
           command: ./bin/rails tests:migrations:populate_v2_4
           name: Populate database with test data
+      - run:
+          command: ./bin/rails db:migrate VERSION=20180707154237
+          name: Run migrations up to v2.4.3
+          environment:
+            SKIP_POST_DEPLOYMENT_MIGRATIONS: true
+      - run:
+          command: ./bin/rails tests:migrations:populate_v2_4_3
+          name: Populate database with test data
       - run:
           command: ./bin/rails db:migrate
-          name: Run all pre-deployment migrations
+          name: Run all remaining pre-deployment migrations
           environment:
             SKIP_POST_DEPLOYMENT_MIGRATIONS: true
       - run:
           command: ./bin/rails db:migrate
-          name: Run all post-deployment remaining migrations
+          name: Run all post-deployment migrations
       - run:
           command: ./bin/rails tests:migrations:check_database
           name: Check migration result

.codeclimate.yml

@@ -26,13 +26,11 @@ plugins:
   bundler-audit:
     enabled: true
   eslint:
-    enabled: true
+    enabled: false
-    channel: eslint-7
   rubocop:
-    enabled: true
+    enabled: false
-    channel: rubocop-1-9-1
   sass-lint:
-    enabled: true
+    enabled: false
 exclude_patterns:
   - spec/
   - vendor/asset/

.devcontainer/devcontainer.json

@@ -11,7 +11,8 @@
   "extensions": [
     "EditorConfig.EditorConfig",
     "dbaeumer.vscode-eslint",
-    "rebornix.Ruby"
+    "rebornix.Ruby",
+    "webben.browserslist"
   ],
 
   // Use 'forwardPorts' to make a list of ports inside the container available locally.
@@ -19,7 +20,7 @@
   "forwardPorts": [3000, 4000],
 
   // Use 'postCreateCommand' to run commands after the container is created.
-  "postCreateCommand": "bundle install --path vendor/bundle && yarn install && ./bin/rails db:setup",
+  "postCreateCommand": "bundle install --path vendor/bundle && yarn install && git checkout -- Gemfile.lock && ./bin/rails db:setup",
 
   // Comment out to connect as root instead. More info: https://aka.ms/vscode-remote/containers/non-root.
   "remoteUser": "vscode"

.devcontainer/docker-compose.yml

@@ -27,6 +27,7 @@ services:
       ES_ENABLED: 'true'
       ES_HOST: es
       ES_PORT: '9200'
+      LIBRE_TRANSLATE_ENDPOINT: http://libretranslate:5000
     # Overrides default command so things don't shut down after the process ends.
     command: sleep infinity
     networks:
@@ -72,6 +73,12 @@ services:
         soft: -1
         hard: -1
 
+  libretranslate:
+    image: libretranslate/libretranslate:v1.2.9
+    restart: unless-stopped
+    networks:
+      - internal_network
+
 volumes:
   postgres-data:
   redis-data:

.env.nanobox

@@ -1,254 +0,0 @@
-# Service dependencies
-# You may set REDIS_URL instead for more advanced options
-REDIS_HOST=$DATA_REDIS_HOST
-REDIS_PORT=6379
-# REDIS_DB=0
-
-# You may set DATABASE_URL instead for more advanced options
-DB_HOST=$DATA_DB_HOST
-DB_USER=$DATA_DB_USER
-DB_NAME=gonano
-DB_PASS=$DATA_DB_PASS
-DB_PORT=5432
-
-# DATABASE_URL=postgresql://$DATA_DB_USER:$DATA_DB_PASS@$DATA_DB_HOST/gonano
-
-# Optional Elasticsearch configuration
-ES_ENABLED=true
-ES_HOST=$DATA_ELASTIC_HOST
-ES_PORT=9200
-
-BIND=0.0.0.0
-
-# Federation
-# Note: Changing LOCAL_DOMAIN at a later time will cause unwanted side effects, including breaking all existing federation.
-# LOCAL_DOMAIN should *NOT* contain the protocol part of the domain e.g https://example.com.
-LOCAL_DOMAIN=${APP_NAME}.nanoapp.io
-
-# Changing LOCAL_HTTPS in production is no longer supported. (Mastodon will always serve https:// links)
-
-# Use this only if you need to run mastodon on a different domain than the one used for federation.
-# You can read more about this option on https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Serving_a_different_domain.md
-# DO *NOT* USE THIS UNLESS YOU KNOW *EXACTLY* WHAT YOU ARE DOING.
-# WEB_DOMAIN=mastodon.example.com
-
-# Use this if you want to have several aliases handler@example1.com
-# handler@example2.com etc. for the same user. LOCAL_DOMAIN should not
-# be added. Comma separated values
-# ALTERNATE_DOMAINS=example1.com,example2.com
-
-# Application secrets
-# Generate each with the `rake secret` task (`nanobox run bundle exec rake secret`)
-SECRET_KEY_BASE=$SECRET_KEY_BASE
-OTP_SECRET=$OTP_SECRET
-
-# VAPID keys (used for push notifications)
-# You can generate the keys using the following command (first is the private key, second is the public one)
-# You should only generate this once per instance. If you later decide to change it, all push subscription will
-# be invalidated, requiring the users to access the website again to resubscribe.
-#
-# Generate with `rake mastodon:webpush:generate_vapid_key` task (`nanobox run bundle exec rake mastodon:webpush:generate_vapid_key`)
-#
-# For more information visit https://rossta.net/blog/using-the-web-push-api-with-vapid.html
-VAPID_PRIVATE_KEY=$VAPID_PRIVATE_KEY
-VAPID_PUBLIC_KEY=$VAPID_PUBLIC_KEY
-
-# Registrations
-# Single user mode will disable registrations and redirect frontpage to the first profile
-# SINGLE_USER_MODE=true
-# Prevent registrations with following e-mail domains
-# EMAIL_DOMAIN_BLACKLIST=example1.com|example2.de|etc
-# Only allow registrations with the following e-mail domains
-# EMAIL_DOMAIN_WHITELIST=example1.com|example2.de|etc
-
-# Optionally change default language
-# DEFAULT_LOCALE=de
-
-# E-mail configuration
-# Note: Mailgun and SparkPost (https://sparkpo.st/smtp) each have good free tiers
-# If you want to use an SMTP server without authentication (e.g local Postfix relay)
-# then set SMTP_AUTH_METHOD and SMTP_OPENSSL_VERIFY_MODE to 'none' and
-# *comment* SMTP_LOGIN and SMTP_PASSWORD (leaving them blank is not enough).
-SMTP_SERVER=$SMTP_SERVER
-SMTP_PORT=587
-SMTP_LOGIN=$SMTP_LOGIN
-SMTP_PASSWORD=$SMTP_PASSWORD
-SMTP_FROM_ADDRESS=notifications@${APP_NAME}.nanoapp.io
-#SMTP_REPLY_TO=
-#SMTP_DOMAIN= # defaults to LOCAL_DOMAIN
-#SMTP_DELIVERY_METHOD=smtp # delivery method can also be sendmail
-#SMTP_AUTH_METHOD=plain
-#SMTP_CA_FILE=/etc/ssl/certs/ca-certificates.crt
-#SMTP_OPENSSL_VERIFY_MODE=peer
-#SMTP_ENABLE_STARTTLS_AUTO=true
-#SMTP_TLS=true
-
-# Optional user upload path and URL (images, avatars). Default is :rails_root/public/system. If you set this variable, you are responsible for making your HTTP server (eg. nginx) serve these files.
-# PAPERCLIP_ROOT_PATH=/var/lib/mastodon/public-system
-# PAPERCLIP_ROOT_URL=/system
-
-# Optional asset host for multi-server setups
-# The asset host must allow cross origin request from WEB_DOMAIN or LOCAL_DOMAIN
-# if WEB_DOMAIN is not set. For example, the server may have the
-# following header field:
-# Access-Control-Allow-Origin: https://example.com/
-# CDN_HOST=https://assets.example.com
-
-# S3 (optional)
-# The attachment host must allow cross origin request from WEB_DOMAIN or
-# LOCAL_DOMAIN if WEB_DOMAIN is not set. For example, the server may have the
-# following header field:
-# Access-Control-Allow-Origin: https://192.168.1.123:9000/
-# S3_ENABLED=true
-# S3_BUCKET=
-# AWS_ACCESS_KEY_ID=
-# AWS_SECRET_ACCESS_KEY=
-# S3_REGION=
-# S3_PROTOCOL=http
-# S3_HOSTNAME=192.168.1.123:9000
-
-# S3 (Minio Config (optional) Please check Minio instance for details)
-# The attachment host must allow cross origin request - see the description
-# above.
-# S3_ENABLED=true
-# S3_BUCKET=
-# AWS_ACCESS_KEY_ID=
-# AWS_SECRET_ACCESS_KEY=
-# S3_REGION=
-# S3_PROTOCOL=https
-# S3_HOSTNAME=
-# S3_ENDPOINT=
-# S3_SIGNATURE_VERSION=
-
-# Google Cloud Storage (optional)
-# Use S3 compatible API. Since GCS does not support Multipart Upload,
-# increase the value of S3_MULTIPART_THRESHOLD to disable Multipart Upload.
-# The attachment host must allow cross origin request - see the description
-# above.
-# S3_ENABLED=true
-# AWS_ACCESS_KEY_ID=
-# AWS_SECRET_ACCESS_KEY=
-# S3_REGION=
-# S3_PROTOCOL=https
-# S3_HOSTNAME=storage.googleapis.com
-# S3_ENDPOINT=https://storage.googleapis.com
-# S3_MULTIPART_THRESHOLD=52428801 # 50.megabytes
-
-# Swift (optional)
-# The attachment host must allow cross origin request - see the description
-# above.
-# SWIFT_ENABLED=true
-# SWIFT_USERNAME=
-# For Keystone V3, the value for SWIFT_TENANT should be the project name
-# SWIFT_TENANT=
-# SWIFT_PASSWORD=
-# Some OpenStack V3 providers require PROJECT_ID (optional)
-# SWIFT_PROJECT_ID=
-# Keystone V2 and V3 URLs are supported. Use a V3 URL if possible to avoid
-# issues with token rate-limiting during high load.
-# SWIFT_AUTH_URL=
-# SWIFT_CONTAINER=
-# SWIFT_OBJECT_URL=
-# SWIFT_REGION=
-# Defaults to 'default'
-# SWIFT_DOMAIN_NAME=
-# Defaults to 60 seconds. Set to 0 to disable
-# SWIFT_CACHE_TTL=
-
-# Optional alias for S3 (e.g. to serve files on a custom domain, possibly using Cloudfront or Cloudflare)
-# S3_ALIAS_HOST=
-
-# Streaming API integration
-# STREAMING_API_BASE_URL=
-
-# Advanced settings
-# If you need to use pgBouncer, you need to disable prepared statements:
-# PREPARED_STATEMENTS=false
-
-# Cluster number setting for streaming API server.
-# If you comment out following line, cluster number will be `numOfCpuCores - 1`.
-# STREAMING_CLUSTER_NUM=1
-
-# Docker mastodon user
-# If you use Docker, you may want to assign UID/GID manually.
-# UID=1000
-# GID=1000
-
-# LDAP authentication (optional)
-# LDAP_ENABLED=true
-# LDAP_HOST=localhost
-# LDAP_PORT=389
-# LDAP_METHOD=simple_tls
-# LDAP_BASE=
-# LDAP_BIND_DN=
-# LDAP_PASSWORD=
-# LDAP_UID=cn
-# LDAP_MAIL=mail
-# LDAP_SEARCH_FILTER=(|(%{uid}=%{email})(%{mail}=%{email}))
-# LDAP_UID_CONVERSION_ENABLED=true
-# LDAP_UID_CONVERSION_SEARCH=., -
-# LDAP_UID_CONVERSION_REPLACE=_
-
-# PAM authentication (optional)
-# PAM authentication uses for the email generation the "email" pam variable
-# and optional as fallback PAM_DEFAULT_SUFFIX
-# The pam environment variable "email" is provided by:
-# https://github.com/devkral/pam_email_extractor
-# PAM_ENABLED=true
-# Fallback email domain for email address generation (LOCAL_DOMAIN by default)
-# PAM_EMAIL_DOMAIN=example.com
-# Name of the pam service (pam "auth" section is evaluated)
-# PAM_DEFAULT_SERVICE=rpam
-# Name of the pam service used for checking if an user can register (pam "account" section is evaluated) (nil (disabled) by default)
-# PAM_CONTROLLED_SERVICE=rpam
-
-# Optional CAS authentication (cf. omniauth-cas) :
-# CAS_ENABLED=true
-# CAS_URL=https://sso.myserver.com/
-# CAS_HOST=sso.myserver.com/
-# CAS_PORT=443
-# CAS_SSL=true
-# CAS_VALIDATE_URL=
-# CAS_CALLBACK_URL=
-# CAS_LOGOUT_URL=
-# CAS_LOGIN_URL=
-# CAS_UID_FIELD='user'
-# CAS_CA_PATH=
-# CAS_DISABLE_SSL_VERIFICATION=false
-# CAS_UID_KEY='user'
-# CAS_NAME_KEY='name'
-# CAS_EMAIL_KEY='email'
-# CAS_NICKNAME_KEY='nickname'
-# CAS_FIRST_NAME_KEY='firstname'
-# CAS_LAST_NAME_KEY='lastname'
-# CAS_LOCATION_KEY='location'
-# CAS_IMAGE_KEY='image'
-# CAS_PHONE_KEY='phone'
-# CAS_SECURITY_ASSUME_EMAIL_IS_VERIFIED=true
-
-# Optional SAML authentication (cf. omniauth-saml)
-# SAML_ENABLED=true
-# SAML_ACS_URL=http://localhost:3000/auth/auth/saml/callback
-# SAML_ISSUER=https://example.com
-# SAML_IDP_SSO_TARGET_URL=https://idp.testshib.org/idp/profile/SAML2/Redirect/SSO
-# SAML_IDP_CERT=
-# SAML_IDP_CERT_FINGERPRINT=
-# SAML_NAME_IDENTIFIER_FORMAT=
-# SAML_CERT=
-# SAML_PRIVATE_KEY=
-# SAML_SECURITY_WANT_ASSERTION_SIGNED=true
-# SAML_SECURITY_WANT_ASSERTION_ENCRYPTED=true
-# SAML_SECURITY_ASSUME_EMAIL_IS_VERIFIED=true
-# SAML_ATTRIBUTES_STATEMENTS_UID="urn:oid:0.9.2342.19200300.100.1.1"
-# SAML_ATTRIBUTES_STATEMENTS_EMAIL="urn:oid:1.3.6.1.4.1.5923.1.1.1.6"
-# SAML_ATTRIBUTES_STATEMENTS_FULL_NAME="urn:oid:2.16.840.1.113730.3.1.241"
-# SAML_ATTRIBUTES_STATEMENTS_FIRST_NAME="urn:oid:2.5.4.42"
-# SAML_ATTRIBUTES_STATEMENTS_LAST_NAME="urn:oid:2.5.4.4"
-# SAML_UID_ATTRIBUTE="urn:oid:0.9.2342.19200300.100.1.1"
-# SAML_ATTRIBUTES_STATEMENTS_VERIFIED=
-# SAML_ATTRIBUTES_STATEMENTS_VERIFIED_EMAIL=
-
-# Use HTTP proxy for outgoing request (optional)
-# http_proxy=http://gateway.local:8118
-# Access control for hidden service.
-# ALLOW_ACCESS_TO_HIDDEN_SERVICE=true

.env.production.sample

@@ -17,7 +17,7 @@
 LOCAL_DOMAIN=example.com
 
 # Use this only if you need to run mastodon on a different domain than the one used for federation.
-# You can read more about this option on https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Serving_a_different_domain.md
+# You can read more about this option on https://docs.joinmastodon.org/admin/config/#web-domain
 # DO *NOT* USE THIS UNLESS YOU KNOW *EXACTLY* WHAT YOU ARE DOING.
 # WEB_DOMAIN=mastodon.example.com
 
@@ -247,7 +247,7 @@ SMTP_FROM_ADDRESS=notifications@example.com
 # ---------------
 # Various ways to customize Mastodon's behavior
 # ---------------
- 
+
 # Maximum allowed character count
 MAX_TOOT_CHARS=500
 
@@ -279,13 +279,25 @@ MAX_POLL_OPTION_CHARS=100
 # Only relevant when elasticsearch is installed
 # MAX_SEARCH_RESULTS=20
 
+# Maximum hashtags to display
+# Customize the number of hashtags shown in 'Explore'
+# MAX_TRENDING_TAGS=10
+
 # Maximum custom emoji file sizes
 # If undefined or smaller than MAX_EMOJI_SIZE, the value
 # of MAX_EMOJI_SIZE will be used for MAX_REMOTE_EMOJI_SIZE
 # Units are in bytes
-MAX_EMOJI_SIZE=51200
+# MAX_EMOJI_SIZE=262144
-MAX_REMOTE_EMOJI_SIZE=204800
+# MAX_REMOTE_EMOJI_SIZE=262144
 
 # Optional hCaptcha support
 # HCAPTCHA_SECRET_KEY=
 # HCAPTCHA_SITE_KEY=
+
+# IP and session retention
+# -----------------------
+# Make sure to modify the scheduling of ip_cleanup_scheduler in config/sidekiq.yml
+# to be less than daily if you lower IP_RETENTION_PERIOD below two days (172800).
+# -----------------------
+IP_RETENTION_PERIOD=31556952
+SESSION_RETENTION_PERIOD=31556952

.eslintrc.js

@@ -12,7 +12,7 @@ module.exports = {
     ATTACHMENT_HOST: false,
   },
 
-  parser: 'babel-eslint',
+  parser: '@babel/eslint-parser',
 
   plugins: [
     'react',
@@ -27,7 +27,7 @@ module.exports = {
       experimentalObjectRestSpread: true,
       jsx: true,
     },
-    ecmaVersion: 2018,
+    ecmaVersion: 2021,
   },
 
   settings: {

.github/ISSUE_TEMPLATE/1.bug_report.yml

@@ -31,6 +31,11 @@ body:
       description: What happened?
     validations:
       required: true
+  - type: textarea
+    attributes:
+      label: Detailed description
+    validations:
+      required: false
   - type: textarea
     attributes:
       label: Specifications
@@ -38,5 +43,14 @@ body:
         What version or commit hash of Mastodon did you find this bug in?
 
         If a front-end issue, what browser and operating systems were you using?
+      placeholder: |
+        Mastodon 3.5.3 (or Edge)
+        Ruby 2.7.6 (or v3.1.2)
+        Node.js 16.18.0
+
+        Google Chrome 106.0.5249.119
+        Firefox 105.0.3
+        
+        etc...
     validations:
       required: true

.github/ISSUE_TEMPLATE/config.yml

@@ -2,7 +2,4 @@ blank_issues_enabled: false
 contact_links:
   - name: GitHub Discussions
     url: https://github.com/mastodon/mastodon/discussions
-    about: Please ask and answer questions here.
+    about: Please ask and answer questions here.
-  - name: Bug Bounty Program
-    url: https://app.intigriti.com/programs/mastodon/mastodonio/detail
-    about: Please report security vulnerabilities here.

.github/stylelint-matcher.json

@@ -0,0 +1,21 @@
+{
+  "problemMatcher": [
+    {
+      "owner": "stylelint",
+      "pattern": [
+        {
+          "regexp": "^([^\\s].*)$",
+          "file": 1
+        },
+        {
+          "regexp": "^\\s+((\\d+):(\\d+))?\\s+(✖|×)\\s+(.*)\\s{2,}(.*)$",
+          "line": 2,
+          "column": 3,
+          "message": 5,
+          "code": 6,
+          "loop": true
+        }
+      ]
+    }
+  ]
+}

.github/workflows/build-image.yml

@@ -10,34 +10,39 @@ on:
     paths:
       - .github/workflows/build-image.yml
       - Dockerfile
+permissions:
+  contents: read
+  packages: write
+
 jobs:
   build-image:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
-      - uses: docker/setup-qemu-action@v1
+      - uses: docker/setup-qemu-action@v2
-      - uses: docker/setup-buildx-action@v1
+      - uses: docker/setup-buildx-action@v2
-      - uses: docker/login-action@v1
+      - uses: docker/login-action@v2
         with:
           registry: ghcr.io
           username: ${{ github.repository_owner }}
           password: ${{ secrets.GITHUB_TOKEN }}
         if: github.event_name != 'pull_request'
-      - uses: docker/metadata-action@v3
+      - uses: docker/metadata-action@v4
         id: meta
         with:
           images: ghcr.io/${{ github.repository_owner }}/mastodon
           flavor: |
-            latest=true
+            latest=auto
           tags: |
             type=edge,branch=main
-            type=match,pattern=v(.*),group=0
+            type=pep440,pattern={{raw}}
+            type=pep440,pattern=v{{major}}.{{minor}}
             type=ref,event=pr
-      - uses: docker/build-push-action@v2
+      - uses: docker/build-push-action@v3
         with:
           context: .
           platforms: linux/amd64,linux/arm64
           push: ${{ github.event_name != 'pull_request' }}
           tags: ${{ steps.meta.outputs.tags }}
-          cache-from: type=registry,ref=ghcr.io/${{ github.repository_owner }}/mastodon:latest
+          cache-from: type=registry,ref=ghcr.io/${{ github.repository_owner }}/mastodon:edge
           cache-to: type=inline

.github/workflows/check-i18n.yml

@@ -9,12 +9,15 @@ on:
 env:
   RAILS_ENV: test
 
+permissions:
+  contents: read
+
 jobs:
   check-i18n:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v2
+      - uses: actions/checkout@v3
       - name: Install system dependencies
         run: |
           sudo apt-get update

.github/workflows/linter.yml

@@ -0,0 +1,83 @@
+---
+#################################
+#################################
+## Super Linter GitHub Actions ##
+#################################
+#################################
+name: Lint Code Base
+
+#
+# Documentation:
+# https://docs.github.com/en/actions/learn-github-actions/workflow-syntax-for-github-actions
+#
+
+#############################
+# Start the job on all push #
+#############################
+on:
+  push:
+    branches-ignore: [main]
+    # Remove the line above to run when pushing to master
+  pull_request:
+    branches: [main]
+
+###############
+# Set the Job #
+###############
+permissions:
+  checks: write
+  contents: read
+  pull-requests: write
+  statuses: write
+
+jobs:
+  build:
+    # Name the Job
+    name: Lint Code Base
+    # Set the agent to run on
+    runs-on: ubuntu-latest
+
+    ##################
+    # Load all steps #
+    ##################
+    steps:
+      ##########################
+      # Checkout the code base #
+      ##########################
+      - name: Checkout Code
+        uses: actions/checkout@v3
+        with:
+          # Full git history is needed to get a proper list of changed files within `super-linter`
+          fetch-depth: 0
+
+      - name: Set-up Node.js
+        uses: actions/setup-node@v3
+        with:
+          node-version: 16.x
+          cache: yarn
+      - name: Install dependencies
+        run: yarn install --frozen-lockfile
+      - name: Set-up RuboCop Problem Mathcher
+        uses: r7kamura/rubocop-problem-matchers-action@v1
+      - name: Set-up Stylelint Problem Matcher
+        uses: xt0rted/stylelint-problem-matcher@v1
+      # https://github.com/xt0rted/stylelint-problem-matcher/issues/360
+      - run: echo "::add-matcher::.github/stylelint-matcher.json" 
+
+      ################################
+      # Run Linter against code base #
+      ################################
+      - name: Lint Code Base
+        uses: github/super-linter@v4
+        env:
+          CSS_FILE_NAME: stylelint.config.js
+          DEFAULT_BRANCH: main
+          NO_COLOR: 1 # https://github.com/xt0rted/stylelint-problem-matcher/issues/360
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+          JAVASCRIPT_ES_CONFIG_FILE: .eslintrc.js
+          LINTER_RULES_PATH: .
+          RUBY_CONFIG_FILE: .rubocop.yml
+          VALIDATE_ALL_CODEBASE: false
+          VALIDATE_CSS: true
+          VALIDATE_JAVASCRIPT_ES: true
+          VALIDATE_RUBY: true

.github/workflows/test-chart.yml

@@ -0,0 +1,138 @@
+# This is a GitHub workflow defining a set of jobs with a set of steps.
+# ref: https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions
+#
+name: Test chart
+
+on:
+  pull_request:
+    paths:
+      - "chart/**"
+      - "!**.md"
+      - ".github/workflows/test-chart.yml"
+  push:
+    paths:
+      - "chart/**"
+      - "!**.md"
+      - ".github/workflows/test-chart.yml"
+    branches-ignore:
+      - "dependabot/**"
+  workflow_dispatch:
+
+permissions:
+  contents: read
+
+defaults:
+  run:
+    working-directory: chart
+
+jobs:
+  lint-templates:
+    runs-on: ubuntu-22.04
+
+    steps:
+      - uses: actions/checkout@v3
+      - uses: actions/setup-python@v4
+        with:
+          python-version: "3.x"
+
+      - name: Install dependencies (yamllint)
+        run: pip install yamllint
+
+      - run: helm dependency update
+
+      - name: helm lint
+        run: |
+          helm lint . \
+              --values dev-values.yaml
+
+      - name: helm template
+        run: |
+          helm template . \
+              --values dev-values.yaml \
+              --output-dir rendered-templates
+
+      - name: yamllint (only on templates we manage)
+        run: |
+          rm -rf rendered-templates/mastodon/charts
+
+          yamllint rendered-templates \
+            --config-data "{rules: {indentation: {spaces: 2}, line-length: disable}}"
+
+  # This job helps us validate that rendered templates are valid k8s resources
+  # against a k8s api-server, via "helm template --validate", but also that a
+  # basic configuration can be used to successfully startup mastodon.
+  #
+  test-install:
+    runs-on: ubuntu-22.04
+    timeout-minutes: 15
+
+    strategy:
+      fail-fast: false
+      matrix:
+        include:
+          # k3s-channel reference: https://update.k3s.io/v1-release/channels
+          - k3s-channel: latest
+          - k3s-channel: stable
+
+          # This represents the oldest configuration we test against.
+          #
+          # The k8s version chosen is based on the oldest still supported k8s
+          # version among two managed k8s services, GKE, EKS.
+          # - GKE: https://endoflife.date/google-kubernetes-engine
+          # - EKS: https://endoflife.date/amazon-eks
+          #
+          # The helm client's version can influence what helper functions is
+          # available for use in the templates, currently we need v3.6.0 or
+          # higher.
+          #
+          - k3s-channel: v1.21
+            helm-version: v3.6.0
+
+    steps:
+      - uses: actions/checkout@v3
+
+      # This action starts a k8s cluster with NetworkPolicy enforcement and
+      # installs both kubectl and helm.
+      #
+      # ref: https://github.com/jupyterhub/action-k3s-helm#readme
+      #
+      - uses: jupyterhub/action-k3s-helm@v3
+        with:
+          k3s-channel: ${{ matrix.k3s-channel }}
+          helm-version: ${{ matrix.helm-version }}
+          metrics-enabled: false
+          traefik-enabled: false
+          docker-enabled: false
+
+      - run: helm dependency update
+
+      # Validate rendered helm templates against the k8s api-server
+      - name: helm template --validate
+        run: |
+          helm template --validate mastodon . \
+              --values dev-values.yaml
+
+      - name: helm install
+        run: |
+          helm install mastodon . \
+              --values dev-values.yaml \
+              --timeout 10m
+
+      # This actions provides a report about the state of the k8s cluster,
+      # providing logs etc on anything that has failed and workloads marked as
+      # important.
+      #
+      # ref: https://github.com/jupyterhub/action-k8s-namespace-report#readme
+      #
+      - name: Kubernetes namespace report
+        uses: jupyterhub/action-k8s-namespace-report@v1
+        if: always()
+        with:
+          important-workloads: >-
+            deploy/mastodon-sidekiq
+            deploy/mastodon-streaming
+            deploy/mastodon-web
+            job/mastodon-assets-precompile
+            job/mastodon-chewy-upgrade
+            job/mastodon-create-admin
+            job/mastodon-db-migrate

.gitignore

@@ -44,6 +44,9 @@
 /redis
 /elasticsearch
 
+# ignore Helm charts
+/chart/*.tgz
+
 # ignore Helm dependency charts
 /chart/charts/*.tgz
 

.rubocop.yml

@@ -67,7 +67,7 @@ Lint/UselessAccessModifier:
     - class_methods
 
 Metrics/AbcSize:
-  Max: 100
+  Max: 115
   Exclude:
     - 'lib/mastodon/*_cli.rb'
 
@@ -84,7 +84,7 @@ Metrics/BlockNesting:
 
 Metrics/ClassLength:
   CountComments: false
-  Max: 400
+  Max: 500
   Exclude:
     - 'lib/mastodon/*_cli.rb'
 
@@ -281,6 +281,9 @@ Style/RedundantRegexpEscape:
 Style/RedundantReturn:
   Enabled: true
 
+Style/RedundantBegin:
+  Enabled: false
+
 Style/RegexpLiteral:
   Enabled: false
 

.ruby-gemset

@@ -0,0 +1 @@
+mastodon

.sass-lint.yml

@@ -1,37 +0,0 @@
-# Linter Documentation:
-# https://github.com/sasstools/sass-lint/tree/v1.13.1/docs/options
-
-files:
-  include: app/javascript/styles/**/*.scss
-  ignore:
-    - app/javascript/styles/mastodon/reset.scss
-
-rules:
-  # Disallows
-  no-color-literals: 0
-  no-css-comments: 0
-  no-duplicate-properties: 0
-  no-ids: 0
-  no-important: 0
-  no-mergeable-selectors: 0
-  no-misspelled-properties: 0
-  no-qualifying-elements: 0
-  no-transition-all: 0
-  no-vendor-prefixes: 0
-
-  # Nesting
-  force-element-nesting: 0
-  force-attribute-nesting: 0
-  force-pseudo-nesting: 0
-
-  # Name Formats
-  class-name-format: 0
-  leading-zero: 0
-
-  # Style Guide
-  attribute-quotes: 0
-  hex-length: 0
-  indentation: 0
-  nesting-depth: 0
-  property-sort-order: 0
-  quotes: 0