* Admin: Show unconfirmed email address on account page
* Admin: Allow staff to change user email addresses
* ActionLog: On change_email, log current email address and new unconfirmed email address
- Explicitly specify video codec.
When ffmpeg isn't compiled with libx264 but openh264, mpeg4 is selected as video codec.
- Swap avarage bitrate and max bitrate.
ancestor_statuses and descendant_statuses used to include the root status
itself, but the behavior is confusing because the root status is not
an ancestor nor descendant.
* Implement Assignment of Reports (#6967)
* Change translation of admin.report.comment.label to "Report Comment" for clarity
As we'll soon add the ability for reports to have comments on them, this clarification makes sense.
* Implement notes for Reports
This enables moderators to leave comments about a report whilst they work on it
* Fix display of report moderation notes
* Allow reports to be reopened / marked as unresolved
* Redirect to reports listing upon resolution of report
* Implement "resolve with note" functionality
* Add inverse relationship for report notes
* Remove additional database querying when loading report notes
* Fix tests for reports
* Fix localisations for report notes / reports
Comparison was downcasing only one side, therefore if previously
existing account had a non-lowercase spelling, it would be ignored
when checking for duplicates.
New rake task `mastodon:maintenance:find_duplicate_usernames` will
help find constraint violations that might have occured from the
presence of this bug.
Bump version to 2.3.3
to_s method of HTTP::Response keeps blocking while it receives the whole
content, no matter how it is big. This means it may waste time to receive
unacceptably large files. It may also consume memory and disk in the
process. This solves the inefficency by checking response length while
receiving.
HTTP connections must be explicitly closed in many cases, and letting
perform method close connections makes its callers less redundant and
prevent them from forgetting to close connections.
Usernames with dots in them do not work with routes, because the dot usually separates the desired page format (e.g. json). I don't want to mess with changing route constraints for this patch release.
* Permit dots in usernames with conditions
- Dot cannot be the start or end of username
- a.lice and al.ice are considered the same during sign-up
* Fix regex mixin flags
* update to new version of devise_pam_authenticatable2
* fix behaviour if suffix is nil, fix environment loading, fix user email creation
* code cleanup/fix linter warning
This will prevent, for example, `rake mastodon:redownload_avatars` from crashing when an instance is no longer responding to connection attempts, instead silently continuing as expected.
* Rescue when there's no extension in the remotable
Sometimes the remotable is pointing to a directory with no file
extension. Maybe it should not be expecting to identify based on
extensions to begin with, but since it's the case, it should be ready
for it.
* Fix codeclimate issue
* Check if filename is nil instead of rescueing exception
Suggestion made in the PR
* Avoid concatenation issue if filename is nil
If filename is nil, extname was undefined
* Invert condition
Address PR comments
* Fix prev/next links on public profile page
* Don't make pagination urls if no available statuses
* Fix empty check method
* Put left chevron before prev page link
* Add scope for pagination "starting at" a given id
* Status pagination try 2:
s/prev/older and s/next/newer
"older" on left, "newer" on right
Use new scope for "newer" link
Extract magic 20 page size to constant
Remove max_id from feed pagination as it's not respected
* Reinstate max_id for accounts atom stream
* normalize
* Ensure the app does not even start if OTP_SECRET is not set
* Remove PAPERCLIP_SECRET (it's not used by anything, actually)
Imports are for internal consumption and the url option isn't even
used correctly, so we can remove the hash stuff from them
* Add focus param to media API, center thumbnails on focus point
* Add UI for setting a focal point
* Improve focal point icon on upload item
* Use focal point in upload preview
* Add focalPoint property to ActivityPub
* Don't show focal point button for non-image attachments
* Fix#201: Account archive download
* Export actor and private key in the archive
* Optimize BackupService
- Add conversation to cached associations of status, because
somehow it was forgotten and is source of N+1 queries
- Explicitly call GC between batches of records being fetched
(Model class allocations are the worst offender)
- Stream media files into the tar in 1MB chunks
(Do not allocate media file (up to 8MB) as string into memory)
- Use #bytesize instead of #size to calculate file size for JSON
(Fix FileOverflow error)
- Segment media into subfolders by status ID because apparently
GIF-to-MP4 media are all named "media.mp4" for some reason
* Keep uniquely generated filename in Paperclip::GifTranscoder
* Ensure dumped files do not overwrite each other by maintaing directory partitions
* Give tar archives a good name
* Add scheduler to remove week-old backups
* Fix code style issue
* Fix avatar and header issues by using custom geometry detector
Revert a part of #6508. The file passed to dynamic styles method
was not actually a file, but an instance of Paperclip::Attachment,
which broke all styles by always returning {} from the method.
One problem with GIF avatars was that Paperclip::GeometryDetector
reported wrong dimensions for them, e.g. 120x120 GIF avatar would
for some reason be detected as 120x53. By writing our own geometry
parser, we can use FastImage, which also happens to be faster than
ImageMagick, to detect image dimensions, which are also correct.
Unfortunately, this PR does not implement skipping a `convert`
entirely if the dimensions are already correct, as I found no easy
way to write that behaviour into Paperclip without rewriting the
Paperclip::Thumbnail class.
* Only invoke convert if dimension or format needs to be changed
Also don't apply "-quality 80" option which is probably the reason
for slight color differences between original and remote image
(because it would apply it twice, once on original instance, and
again on the receiving instance)
* Add full-text search for authorized statuses
- Search API will return statuses that match the query
- Only for logged in users
- Only if you are author of the status,
- Or you were mentioned in it
- Or you favourited or reblogged it
- Configuration over `ES_ENABLED`, `ES_HOST`, `ES_PORT`, `ES_PREFIX`
- Run `rails chewy:deploy` to create & populate index
Fix#5880Fix#4293Fix#1152
* Add commented out docker-compose configuration for ES container
* Optimize index import, filter search results
* Add basic normalization to the index
* Add better stemming and normalization to the index
* Skip webfinger request if search query includes both @ and a space
* Fix code style
* Visually separate search result sections
* Fix code style issues
* Add option to show only local toots in timeline preview
Right know, toots from all the known fediverse are shown in the main
page of an instance. That however doesn't reflect the instance itself.
With this option the admin may choose to display only local toots so
that users checking the instance get a better idea of internal
conversations.
* Fix issues pointed by codeclimate and eslint
* Add default message for community timeline
* Update pl.yml
UserTrackingConcern is circumvented by SessionsController#create
because it calls warden, which calls the User#update_tracked_fields!
method directly. Move returning user logic to that method.
A change introduced in #6125 prevents
`Devise::Models::Confirmable#confirm` from being called for existing
users, which in turn leads to `email` not being set to
`unconfirmed_email`, breaking email updates. This also adds a test
that would've caught this issue.
* Add confirmation step for email changes
This adds a confirmation step for email changes of existing users.
Like the initial account confirmation, a confirmation link is sent
to the new address.
Additionally, a notification is sent to the existing address when
the change is initiated. This message includes instruction to reset
the password immediately or to contact the instance admin if the
change was not initiated by the account owner.
Fixes#3871
* Add review fixes
* Add GET /api/v1/instance/peers API to reveal known domains
* Add GET /api/v1/instance/activity API
* Make new APIs disableable, exclude private statuses from activity stats
* Fix code style issue
* Fix week timestamps
This commit also:
- exposes the local-only emoji so that it can be used in examples
- allows local_only to be set explicitly, i.e. for timeline filtering
specs
* Add list of lists component to web UI
* Add list adding
* Add list removing
* List editor modal
* Add API account search limited by following=true relation
* Rework list editor modal
* Remove mandatory pagination of GET /api/v1/lists/:id/accounts
* Adjust search input placeholder
* Fix rspec (#5890)
* i18n: (zh-CN) Add missing translations for #5811 (#5891)
* i18n: (zh-CN) yarn manage:translations -- zh-CN
* i18n: (zh-CN) Add missing translations for #5811
* Fix some issues
- Display loading/missing state for list timelines
- Order lists alphabetically in overview
- Fix async list editor reset
- Redirect to /lists after deleting unpinned list
- Redirect to / after pinning a list
* Remove dead list columns when a list is deleted or fetch returns 404
* Avoid sending explicit Undo->Announce when original deleted
* Do not forward a reply back to the server that sent it
* Deduplicate inboxes of rebloggers' followers for delete forwarding
* Adjust test
* Fix wrong class, bad SQL, wrong variable, outdated comment
* Allow hiding of reblogs from followed users
This adds a new entry to the account menu to allow users to hide
future reblogs from a user (and then if they've done that, to show
future reblogs instead).
This does not remove or add historical reblogs from/to the user's
timeline; it only affects new statuses.
The API for this operates by sending a "reblogs" key to the follow
endpoint. If this is sent when starting a new follow, it will be
respected from the beginning of the follow relationship (even if
the follow request must be approved by the followee). If this is
sent when a follow relationship already exists, it will simply
update the existing follow relationship. As with the notification
muting, this will now return an object ({reblogs: [true|false]}) or
false for each follow relationship when requesting relationship
information for an account. This should cause few issues due to an
object being truthy in many languages, but some modifications may
need to be made in pickier languages.
Database changes: adds a show_reblogs column (default true,
non-nullable) to the follows and follow_requests tables. Because
these are non-nullable, we use the existing MigrationHelpers to
perform this change without locking those tables, although the
tables are likely to be small anyway.
Tests included.
See also <https://github.com/glitch-soc/mastodon/pull/212>.
* Rubocop fixes
* Code review changes
* Test fixes
This patchset closes#648 and resolves#3271.
* Rubocop fix
* Revert reblogs defaulting in argument, fix tests
It turns out we needed this for the same reason we needed it in muting:
if nil gets passed in somehow (most usually by an API client not passing
any value), we need to detect and handle it.
We could specify a default in the parameter and then also catch nil, but
there's no great reason to duplicate the default value.
* Add consumable invites
* Add UI for generating invite codes
* Add tests
* Display max uses and expiration in invites table, delete invite
* Remove unused column and redundant validator
- Default follows not used, probably bad idea
- InviteCodeValidator is redundant because RegistrationsController
checks invite code validity
* Add admin setting to disable invites
* Add admin UI for invites, configurable role for invite creation
- Admin UI that lists everyone's invites, always available
- Admin setting min_invite_role to control who can invite people
- Non-admin invite UI only visible if users are allowed to
* Do not remove invites from database, expire them instantly
* Serialize moved accounts into REST and ActivityPub APIs
* Parse federated moved accounts from ActivityPub
* Add note about moved accounts to public profiles
* Add moved account message to web UI
* Fix code style issues
* Add structure for lists
* Add list timeline streaming API
* Add list APIs, bind list-account relation to follow relation
* Add API for adding/removing accounts from lists
* Add pagination to lists API
* Add pagination to list accounts API
* Adjust scopes for new APIs
- Creating and modifying lists merely requires "write" scope
- Fetching information about lists merely requires "read" scope
* Add test for wrong user context on list timeline
* Clean up tests
=~ made sense when we were passing it through to a regex, but we're no
longer doing that: TagMatcher looks at individual tags and returns a
value that *looks* like what you get out of #=~ but really isn't that
meaningful. Probably a good idea to not subvert convention like this
and instead use a name with guessable intent.
We already know about one regex limitation, which is that they cannot
segment words in e.g. Japanese, Chinese, or Thai. It may also end up
that regex matching is too slow compared to other methods.
However, the regex is an implementation detail. We still want the
ability to switch between "occurs anywhere" and "match whole word", and
caching the matcher result is likely to still be important (since the
matcher itself won't change nearly as often as status ingress rate).
Therefore, we ought to be able to change the cache keys to reflect a
change of data structure.
(Old cache keys expire within minutes, so they shouldn't be too big of
an issue. Old cache keys could also be explicitly removed by an
instance administrator.)
It is reasonable to expect someone to enter #foo to mute hashtag #foo.
However, tags are recorded on statuses without the preceding #.
To adjust for this, we build a separate tag matcher and use
Tag::HASHTAG_RE to extract a hashtag from the hashtag syntax.
* Add a hide_notifications column to mutes
* Add muting_notifications? and a notifications argument to mute!
* block notifications in notify_service from hard muted accounts
* Add specs for how mute! interacts with muting_notifications?
* specs testing that hide_notifications in mutes actually hides notifications
* Add support for muting notifications in MuteService
* API support for muting notifications (and specs)
* Less gross passing of notifications flag
* Break out a separate mute modal with a hide-notifications checkbox.
* Convert profile header mute to use mute modal
* Satisfy eslint.
* specs for MuteService notifications params
* add trailing newlines to files for Pork :)
* Put the label for the hide notifications checkbox in a label element.
* Add a /api/v1/mutes/details route that just returns the array of mutes.
* Define a serializer for /api/v1/mutes/details
* Add more specs for the /api/v1/mutes/details endpoint
* Expose whether a mute hides notifications in the api/v1/relationships endpoint
* Show whether muted users' notifications are muted in account lists
* Allow modifying the hide_notifications of a mute with the /api/v1/accounts/:id/mute endpoint
* make the hide/unhide notifications buttons work
* satisfy eslint
* In probably dead code, replace a dispatch of muteAccount that was skipping the modal with launching the mute modal.
* fix a missing import
* add an explanatory comment to AccountInteractions
* Refactor handling of default params for muting to make code cleaner
* minor code style fixes oops
* Fixed a typo that was breaking the account mute API endpoint
* Apply white-space: nowrap to account relationships icons
* Fix code style issues
* Remove superfluous blank line
* Rename /api/v1/mutes/details -> /api/v2/mutes
* Don't serialize "account" in MuteSerializer
Doing so is somewhat unnecessary since it's always the current user's account.
* Fix wrong variable name in api/v2/mutes
* Use Toggle in place of checkbox in the mute modal.
* Make the Toggle in the mute modal look better
* Code style changes in specs and removed an extra space
* Code review suggestions from akihikodaki
Also fixed a syntax error in tests for AccountInteractions.
* Make AddHideNotificationsToMute Concurrent
It's not clear how much this will benefit instances in practice, as the
number of mutes tends to be pretty small, but this should prevent any
blocking migrations nonetheless.
* Fix up migration things
* Remove /api/v2/mutes
When given two regexps, Regexp.union preserves the options set (or not
set) on each regex; this meant that none of the multiline (m),
case-insensitivity (i), or extended syntax (x) options were set. Our
regexps are written expecting the m, i, and x options were set on all of
them, so we need to make sure that we preserve that behavior.
All the migrations have been updated to use BIGINTs for ID fields in the DB, but ActiveRecord needs to be told to treat those values as BIGINT as well. This PR does that.
* Add moderator role and add pundit policies for admin actions
* Add rake task for turning user into mod and revoking it again
* Fix handling of unauthorized exception
* Deliver new report e-mails to staff, not just admins
* Add promote/demote to admin UI, hide some actions conditionally
* Fix unused i18n
Note that this will only hide/show *future* reblogs by a user, and does
nothing to remove/add reblogs that are already in the timeline. I don't
think that's a particularly confusing behavior, and it's a lot easier
to implement (similar to mutes, I believe).
* Add a test for FollowRequest#authorize!
* Remove tests
There is no need to test
ActiveModel::Validations::ClassMethods#validates.
* Make an alias of destroy! as reject!
Instead of defining the method,
make an alias of destroy! as reject! because of reducing test.
* Work around Twidere and Tootdon bug
Tootdon and Twidere construct @user@domain handles from mentions in toots based
solely on the mention text and account URI's domain without performing any
webfinger call or retrieving account info from the Mastodon server.
As a result, when a remote user has WEB_DOMAIN ≠ LOCAL_DOMAIN, Twidere and
Tootdon will construct the mention as @user@WEB_DOMAIN. Now, this will usually
resolve to the correct account (since the recommended configuration is to have
WEB_DOMAIN perform webfinger redirections to LOCAL_DOMAIN) when processing
mentions, but won't do so when displaying them (as it does not go through the
whole account resolution at that time).
This change rewrites mentions to the resolved account, so that displaying the
mentions will work.
* Use lookbehind instead of non-capturing group in MENTION_RE
Indeed, substitutions with the previous regexp would erroneously eat any
preceding whitespace, which would lead to concatenated mentions in the
previous commit.
Note that users will “lose” up to one character space per mention for their
toots, as that regexp is also used to remove the domain-part of mentioned
users for character counting purposes, and it also erroneously removed the
preceding character if it was a space.
* Show the local couterpart of emoji when it exists in admin/custom_emojis
* Fix indentation
* Fix error
* Add class table-action-link to Overwrite link
* Make it enable to overwrite emojis
* Make Code Climate happy
Also make the keyword-building methods private: they always probably
should have been private, but now I have encoded enough fun and games
into them that it now seems wrong for them to *not* be private.
It is possible to cache a Regexp object, but I'm not sure what happens
if e.g. that object remains in cache across two different Ruby versions.
Caching a string seems to raise fewer questions.
Ditto for ending with \b.
Consider muting the phrase "(hot take)". I stipulate it is reasonable
to enter this with the default "match whole word" behavior. Under the
old behavior, this would be encoded as
\b\(hot\ take\)\b
However, if \b is before the first character in the string and the first
character in the string is not a word character, then the match will
fail. Ditto for after. In our example, "(" is not a word character, so
this will not match statuses containing "(hot take)", and that's a very
surprising behavior.
To address this, we only add leading and trailing \b to keywords that
start or end with word characters.
There are two motivations for this:
1. It looks like we're going to add other features that require
server-side storage (e.g. user notes).
2. Namespacing glitchsoc modifications is a good idea anyway: even if we
do not end up doing (1), if upstream introduces a keyword-mute feature
that also uses a "KeywordMute" model, we can avoid some merge
conflicts this way and work on the more interesting task of
choosing which implementation to use.
Word-boundary matching only works as intended in English and languages
that use similar word-breaking characters; it doesn't work so well in
(say) Japanese, Chinese, or Thai. It's unacceptable to have a feature
that doesn't work as intended for some languages. (Moreso especially
considering that it's likely that the largest contingent on the Mastodon
bit of the fediverse speaks Japanese.)
There are rules specified in Unicode TR29[1] for word-breaking across
all languages supported by Unicode, but the rules deliberately do not
cover all cases. In fact, TR29 states
For example, reliable detection of word boundaries in languages such
as Thai, Lao, Chinese, or Japanese requires the use of dictionary
lookup, analogous to English hyphenation.
So we aren't going to be able to make word detection work with regexes
within Mastodon (or glitchsoc). However, for a first pass (even if it's
kind of punting) we can allow the user to choose whether they want word
or substring detection and warn about the limitations of this
implementation in, say, docs.
[1]: https://unicode.org/reports/tr29/https://web.archive.org/web/20171001005125/https://unicode.org/reports/tr29/
The intent of the previous concatenation was to minimize object
allocations, which can end up being a slow killer. However, it turns
out that under MRI 2.4.x, the shove-strings-in-an-array-and-join method
is not only arguably more common but (in this particular case) actually
allocates *fewer* objects than the string concatenation.
Or, at least, that's what I gather by running this:
words = %w(palmettoes nudged hibernation bullish stockade's tightened Hades
Dixie's formalize superego's commissaries Zappa's viceroy's apothecaries
tablespoonful's barons Chennai tollgate ticked expands)
a = Account.first
KeywordMute.transaction do
words.each { |w| KeywordMute.create!(keyword: w, account: a) }
GC.start
s1 = GC.stat
re = String.new.tap do |str|
scoped = KeywordMute.where(account: a)
keywords = scoped.select(:id, :keyword)
count = scoped.count
keywords.find_each.with_index do |kw, index|
str << Regexp.escape(kw.keyword.strip)
str << '|' if index < count - 1
end
end
s2 = GC.stat
puts s1.inspect, s2.inspect
raise ActiveRecord::Rollback
end
vs this:
words = %w( palmettoes nudged hibernation bullish stockade's tightened Hades Dixie's
formalize superego's commissaries Zappa's viceroy's apothecaries tablespoonful's
barons Chennai tollgate ticked expands
)
a = Account.first
KeywordMute.transaction do
words.each { |w| KeywordMute.create!(keyword: w, account: a) }
GC.start
s1 = GC.stat
re = [].tap do |arr|
KeywordMute.where(account: a).select(:keyword, :id).find_each do |m|
arr << Regexp.escape(m.keyword.strip)
end
end.join('|')
s2 = GC.stat
puts s1.inspect, s2.inspect
raise ActiveRecord::Rollback
end
Using rails r, here is a comparison of the total_allocated_objects and
malloc_increase_bytes GC stat data:
total_allocated_objects malloc_increase_bytes
string concat 3200241 -> 3201428 (+1187) 1176 -> 45216 (44040)
array join 3200380 -> 3201299 (+919) 1176 -> 36448 (35272)
It would also have been valid to get rid of the attr_reader, but I like
being able to reach inside KeywordMute::Matcher without resorting to
instance_variable_get tomfoolery.
A matcher object that builds a match from KeywordMute data and runs it
over text is, in my view, one of the easier ways to write examples for
this sort of thing.
Gist of the proposed keyword mute implementation:
Keyword mutes are represented server-side as one keyword per record.
For each account, there exists a keyword regex that is generated as one
big alternation of all keywords. This regex is cached (in Redis, I
guess) so we can quickly get it when filtering in FeedManager.
* Add option to reduce motion
* Use HOC to wrap all Motion calls
* fix case-sensitive issue
* Avoid updating too frequently
* Get rid of unnecessary change to _simple_status.html.haml
The main change of this PR is removing `order by visibility` hack.
This was introduced to force using of `index_statuses_on_account_id` instead of PK index, but it seems no longer needed probably due to `index_statuses_on_account_id_id`. Removing this avoids reading all rows, so really improves first fetching of the user who has lot of statuses.
I have also changed JOIN to IN + subquery, which slightly faster in most cases.
- For some reason, :if option on before_action did not work. It got
executed every time, returned false, and the action run anyway,
which led to the current_sign_in_at and sign_in_count being
updated on every request
- Return "do not filter" early in FeedManager#filter_from_home? if
the status is authored by receiver. Usually this method is not
called for own statuses at all, but it is called when Feed#get
uses the database
- Return early if #reload_stale_associations! has nothing to load
to save a database query with WHERE 1=0
* Retoot count increases without reason
-The store_uri method for Statuses was being called on after_create and causing reblogs to be incremented twice.
-This calls it when the transaction is finished by using after_create_commit.
-Fixes #4916.
* Added test case for after_create_commit callback for checking reblog count.
* Rewrote test to keep original, but added one for only the after_create_commit callback.
* Add foreign key constraint to column `account` in `account_moderation_notes`
* Change account_id and target_account_id to non-nullable in account_moderation_notes
* Add dependent: :destroy to account and target_account in account_moderation_notes
- Rename Mastodon::TimestampIds into Mastodon::Snowflake for clarity
- Skip for statuses coming from inbox, aka delivered in real-time
- Skip for statuses that claim to be from the future
* Use non-serial IDs
This change makes a number of nontrivial tweaks to the data model in
Mastodon:
* All IDs are now 8 byte integers (rather than mixed 4- and 8-byte)
* IDs are now assigned as:
* Top 6 bytes: millisecond-resolution time from epoch
* Bottom 2 bytes: serial (within the millisecond) sequence number
* See /lib/tasks/db.rake's `define_timestamp_id` for details, but
note that the purpose of these changes is to make it difficult to
determine the number of objects in a table from the ID of any
object.
* The Redis sorted set used for the feed will have values used to look
up toots, rather than scores. This is almost always the same as the
existing behavior, except in the case of boosted toots. This change
was made because Redis stores scores as double-precision floats,
which cannot store the new ID format exactly. Note that this doesn't
cause problems with sorting/pagination, because ZREVRANGEBYSCORE
sorts lexicographically when scores are tied. (This will still cause
sorting issues when the ID gains a new significant digit, but that's
extraordinarily uncommon.)
Note a couple of tradeoffs have been made in this commit:
* lib/tasks/db.rake is used to enforce many/most column constraints,
because this commit seems likely to take a while to bring upstream.
Enforcing a post-migrate hook is an easier way to maintain the code
in the interim.
* Boosted toots will appear in the timeline as many times as they have
been boosted. This is a tradeoff due to the way the feed is saved in
Redis at the moment, but will be handled by a future commit.
This would effectively close Mastodon's #1059, as it is a
snowflake-like system of generating IDs. However, given how involved
the changes were simply within Mastodon, it may have unexpected
interactions with some clients, if they store IDs as doubles
(or as 4-byte integers). This was a problem that Twitter ran into with
their "snowflake" transition, particularly in JavaScript clients that
treated IDs as JS integers, rather than strings. It therefore would be
useful to test these changes at least in the web interface and popular
clients before pushing them to all users.
* Fix JavaScript interface with long IDs
Somewhat predictably, the JS interface handled IDs as numbers, which in
JS are IEEE double-precision floats. This loses some precision when
working with numbers as large as those generated by the new ID scheme,
so we instead handle them here as strings. This is relatively simple,
and doesn't appear to have caused any problems, but should definitely
be tested more thoroughly than the built-in tests. Several days of use
appear to support this working properly.
BREAKING CHANGE:
The major(!) change here is that IDs are now returned as strings by the
REST endpoints, rather than as integers. In practice, relatively few
changes were required to make the existing JS UI work with this change,
but it will likely hit API clients pretty hard: it's an entirely
different type to consume. (The one API client I tested, Tusky, handles
this with no problems, however.)
Twitter ran into this issue when introducing Snowflake IDs, and decided
to instead introduce an `id_str` field in JSON responses. I have opted
to *not* do that, and instead force all IDs to 64-bit integers
represented by strings in one go. (I believe Twitter exacerbated their
problem by rolling out the changes three times: once for statuses, once
for DMs, and once for user IDs, as well as by leaving an integer ID
value in JSON. As they said, "If you’re using the `id` field with JSON
in a Javascript-related language, there is a very high likelihood that
the integers will be silently munged by Javascript interpreters. In most
cases, this will result in behavior such as being unable to load or
delete a specific direct message, because the ID you're sending to the
API is different than the actual identifier associated with the
message." [1]) However, given that this is a significant change for API
users, alternatives or a transition time may be appropriate.
1: https://blog.twitter.com/developer/en_us/a/2011/direct-messages-going-snowflake-on-sep-30-2011.html
* Restructure feed pushes/unpushes
This was necessary because the previous behavior used Redis zset scores
to identify statuses, but those are IEEE double-precision floats, so we
can't actually use them to identify all 64-bit IDs. However, it leaves
the code in a much better state for refactoring reblog handling /
coalescing.
Feed-management code has been consolidated in FeedManager, including:
* BatchedRemoveStatusService no longer directly manipulates feed zsets
* RemoveStatusService no longer directly manipulates feed zsets
* PrecomputeFeedService has moved its logic to FeedManager#populate_feed
(PrecomputeFeedService largely made lots of calls to FeedManager, but
didn't follow the normal adding-to-feed process.)
This has the effect of unifying all of the feed push/unpush logic in
FeedManager, making it much more tractable to update it in the future.
Due to some additional checks that must be made during, for example,
batch status removals, some Redis pipelining has been removed. It does
not appear that this should cause significantly increased load, but if
necessary, some optimizations are possible in batch cases. These were
omitted in the pursuit of simplicity, but a batch_push and batch_unpush
would be possible in the future.
Tests were added to verify that pushes happen under expected conditions,
and to verify reblog behavior (both on pushing and unpushing). In the
case of unpushing, this includes testing behavior that currently leads
to confusion such as Mastodon's #2817, but this codifies that the
behavior is currently expected.
* Rubocop fixes
I could swear I made these changes already, but I must have lost them
somewhere along the line.
* Address review comments
This addresses the first two comments from review of this feature:
https://github.com/tootsuite/mastodon/pull/4801#discussion_r139336735https://github.com/tootsuite/mastodon/pull/4801#discussion_r139336931
This adds an optional argument to FeedManager#key, the subtype of feed
key to generate. It also tests to ensure that FeedManager's settings are
such that reblogs won't be tracked forever.
* Hardcode IdToBigints migration columns
This addresses a comment during review:
https://github.com/tootsuite/mastodon/pull/4801#discussion_r139337452
This means we'll need to make sure that all _id columns going forward
are bigints, but that should happen automatically in most cases.
* Additional fixes for stringified IDs in JSON
These should be the last two. These were identified using eslint to try
to identify any plain casts to JavaScript numbers. (Some such casts are
legitimate, but these were not.)
Adding the following to .eslintrc.yml will identify casts to numbers:
~~~
no-restricted-syntax:
- warn
- selector: UnaryExpression[operator='+'] > :not(Literal)
message: Avoid the use of unary +
- selector: CallExpression[callee.name='Number']
message: Casting with Number() may coerce string IDs to numbers
~~~
The remaining three casts appear legitimate: two casts to array indices,
one in a server to turn an environment variable into a number.
* Only implement timestamp IDs for Status IDs
Per discussion in #4801, this is only being merged in for Status IDs at
this point. We do this in a migration, as there is no longer use for
a post-migration hook. We keep the initialization of the timestamp_id
function as a Rake task, as it is also needed after db:schema:load (as
db/schema.rb doesn't store Postgres functions).
* Change internal streaming payloads to stringified IDs as well
This is equivalent to 591a9af356faf2d5c7e66e3ec715502796c875cd from
#5019, with an extra change for the addition to FeedManager#unpush.
* Ensure we have a status_id_seq sequence
Apparently this is not a given when specifying a custom ID function,
so now we ensure it gets created. This uses the generic version of this
function to more easily support adding additional tables with timestamp
IDs in the future, although it would be possible to cut this down to a
less generic version if necessary. It is only run during db:schema:load
or the relevant migration, so the overhead is extraordinarily minimal.
* Transition reblogs to new Redis format
This provides a one-way migration to transition old Redis reblog entries
into the new format, with a separate tracking entry for reblogs.
It is not invertible because doing so could (if timestamp IDs are used)
require a database query for each status in each users' feed, which is
likely to be a significant toll on major instances.
* Address review comments from @akihikodaki
No functional changes.
* Additional review changes
* Heredoc cleanup
* Run db:schema:load hooks for test in development
This matches the behavior in Rails'
ActiveRecord::Tasks::DatabaseTasks.each_current_configuration, which
would otherwise break `rake db:setup` in development.
It also moves some functionality out to a library, which will be a good
place to put additional related functionality in the near future.
* Make IdsToBigints (mostly!) non-blocking
This pulls in GitLab's MigrationHelpers, which include code to make
column changes in ways that Postgres can do without locking. In general,
this involves creating a new column, adding an index and any foreign
keys as appropriate, adding a trigger to keep it populated alongside
the old column, and then progressively copying data over to the new
column, before removing the old column and replacing it with the new
one.
A few changes to GitLab's MigrationHelpers were necessary:
* Some changes were made to remove dependencies on other GitLab code.
* We explicitly wait for index creation before forging ahead on column
replacements.
* We use different temporary column names, to avoid running into index
name length limits.
* We rename the generated indices back to what they "should" be after
replacing columns.
* We rename the generated foreign keys to use the new column names when
we had to create them. (This allows the migration to be rolled back
without incident.)
# Big Scary Warning
There are two things here that may trip up large instances:
1. The change for tables' "id" columns is not concurrent. In
particular, the stream_entries table may be big, and does not
concurrently migrate its id column. (On the other hand, x_id type
columns are all concurrent.)
2. This migration will take a long time to run, *but it should not
lock tables during that time* (with the exception of the "id"
columns as described above). That means this should probably be run
in `screen` or some other session that can be run for a long time.
Notably, the migration will take *longer* than it would without
these changes, but the website will still be responsive during that
time.
These changes were tested on a relatively large statuses table (256k
entries), and the service remained responsive during the migration.
Migrations both forward and backward were tested.
* Rubocop fixes
* MigrationHelpers: Support ID columns in some cases
This doesn't work in cases where the ID column is referred to as a
foreign key by another table.
* MigrationHelpers: support foreign keys for ID cols
Note that this does not yet support foreign keys on non-primary-key
columns, but Mastodon also doesn't yet have any that we've needed to
migrate.
This means we can perform fully "concurrent" migrations to change ID
column types, and the IdsToBigints migration can happen with effectively
no downtime. (A few operations require a transaction, such as renaming
columns or deleting them, but these transactions should not block for
noticeable amounts of time.)
The algorithm for generating foreign key names has changed with this,
and therefore all of those changed in schema.rb.
* Provide status, allow for interruptions
The MigrationHelpers now allow restarting the rename of a column if it
was interrupted, by removing the old "new column" and re-starting the
process.
Along with this, they now provide status updates on the changes which
are happening, as well as indications about when the changes can be
safely interrupted (when there are at least 10 seconds estimated to be
left before copying data is complete).
The IdsToBigints migration now also sorts the columns it migrates by
size, starting with the largest tables. This should provide
administrators a worst-case scenario estimate for the length of
migrations: each successive change will get faster, giving admins a
chance to abort early on if they need to run the migration later. The
idea is that this does not force them to try to time interruptions
between smaller migrations.
* Fix column sorting in IdsToBigints
Not a significant change, but it impacts the order of columns in the
database and db/schema.rb.
* Actually pause before IdsToBigints
If the signature could not be verified and the webfinger of the account
was last retrieved longer than the cache period, try re-resolving the
account and then attempting to verify the signature again
* Fix#117 - Add ability to specify alternative text for media attachments
- POST /api/v1/media accepts `description` straight away
- PUT /api/v1/media/:id to update `description` (only for unattached ones)
- Serialized as `name` of Document object in ActivityPub
- Uploads form adjusted for better performance and description input
* Add tests
* Change undo button blend mode to difference
We added horizontal layout to preview card for wide image. However, max height of the thumbnail is still limited to 120px and it makes nearly square images to too small for that layout.
This PR increases max height as well as max width.
* Add emoji autosuggest
Some credit goes to glitch-soc/mastodon#149
* Remove server-side shortcode->unicode conversion
* Insert shortcode when suggestion is custom emoji
* Remove remnant of server-side emojis
* Update style of autosuggestions
* Fix wrong emoji filenames generated in autosuggest item
* Do not lazy load emoji picker, as that no longer works
* Fix custom emoji autosuggest
* Fix multiple "Custom" categories getting added to emoji index, only add once
Currently we're using a list of MIME types for `accept` attribute on `input[type="file"]` for filter options of file picker, and actual file extensions will be infered by browsers. However, infered extensions may not include our expected items. For example, "image/jpeg" seems to be infered to
only ".jfif" extension in Firefox.
To ensure common file extensions are in the list, this PR adds file extensions in addition to MIME types. Also having items in both format is encouraged by HTML5 spec.
https://www.w3.org/TR/html5/forms.html#file-upload-state-(type=file)
* Add support for selecting a theme
* Fix codeclimate issues
* Look up site default style if current user is not available due to e.g. not being logged in
* Remove outdated comment in common.js
* Address requested changes in themes PR
* Fix codeclimate issues
* Explicitly check current_account in application controller and only check theme availability if non-nil
* codeclimate
* explicit precedence with &&
* Fix code style in application_controller according to @nightpool's suggestion, use default style in embedded.html.haml
* codeclimate: indentation + return
* Custom emoji
- In OStatus: `<link rel="emoji" name="coolcat" href="http://..." />`
- In ActivityPub: `{ type: "Emoji", name: ":coolcat:", href: "http://..." }`
- In REST API: Status object includes `emojis` array (`shortcode`, `url`)
- Domain blocks with reject media stop emojis
- Emoji file up to 50KB
- Web UI handles custom emojis
- Static pages render custom emojis as `<img />` tags
Side effects:
- Undo #4500 optimization, as I needed to modify it to restore
shortcode handling in emojify()
- Formatter#plaintext should now make sure stripped out line-breaks
and paragraphs are replaced with newlines
* Fix emoji at the start not being converted
They are marked as read-only by Rails, but we know what we are doing,
so we are un-marking them as such.
The mastodon:maintenance:update_counter_caches task is not really
supposed to be run anymore (it was a one-time thing during an upgrade)
however, just in case, I have modified it to not touch ActivityPub
accounts.
Also, no point writing to logger from these rake tasks, since they
are not to be run from cron. Better to give stdout feedback.
When a new user confirms their e-mail, bootstrap their home timeline
by automatically following a set of accounts. By default, all local
admin accounts (that are unlocked). Can be customized by new admin
setting (comma-separated usernames, local and unlocked only)
* Decouple Status#local? from uri being nil
* Replace on-the-fly URI generation with stored URIs
- Generate URI in after_save hook for local statuses
- Use static value in TagManager when available, fallback to tag format
- Make TagManager use ActivityPub::TagManager to understand new format
- Adjust tests
* Use other heuristic for locality of old statuses, do not perform long query
* Exclude tombstone stream entries from Atom feed
* Prevent nil statuses from landing in Pubsubhubbub::DistributionWorker
* Fix URI not being saved (#4818)
* Add more specs for Status
* Save generated uri immediately
and also fix method order to minimize diff.
* Fix alternate HTML URL in Atom
* Fix tests
* Remove not-null constraint from statuses migration to speed it up
* Make PreviewCard records reuseable between statuses
**Warning!** Migration truncates preview_cards tablec
* Allow a wider thumbnail for link preview, display it in horizontal layout (#4648)
* Delete preview cards files before truncating
* Rename old table instead of truncating it
* Add mastodon:maintenance:remove_deprecated_preview_cards
* Ignore deprecated_preview_cards in schema definition
* Fix null behaviour
* Refactor Web::PushSubscription, remove welcome message
* Add missing helper
* Use locale of the receiver on push notifications (#4519)
* Remove unused translations
* Fix dir on notifications
Requires moving Atom rendering from DistributionWorker (where
`stream_entry.status` is already nil) to inline (where
`stream_entry.status.destroyed?` is true) and distributing that.
Unfortunately, such XML renderings can no longer be easily chained
together into one payload of n items.
* Allow multiple pinned statuses to be shown and make them be ordered by pinned date
* Set timestamps NOT NULL
* Make single-line pinned_statuses
* Spec for pinned_statuses
* Remove redundant empty line
* Add code for creating/managing apps to settings section
* Add specs for app changes
* Fix controller spec
* Fix view file I pasted over by mistake
* Add locale strings. Add 'my apps' to nav
* Add Client ID/Secret to App page. Add some visual separation
* Fix rubocop warnings
* Fix embarrassing typo
I lost an `end` statement while fixing a merge conflict.
* Add code for creating/managing apps to settings section
- Add specs for app changes
- Add locale strings. Add 'my apps' to nav
- Add Client ID/Secret to App page. Add some visual separation
- Fix some bugs/warnings
* Update to match code standards
* Trigger notification
* Add warning about not sharing API secrets
* Tweak spec a bit
* Cleanup fixture creation by using let!
* Remove unused key
* Add foreign key for application<->user
* Add ActivityPub inbox
* Handle ActivityPub deletes
* Handle ActivityPub creates
* Handle ActivityPub announces
* Stubs for handling all activities that need to be handled
* Add ActivityPub actor resolving
* Handle conversation URI passing in ActivityPub
* Handle content language in ActivityPub
* Send accept header when fetching actor, handle JSON parse errors
* Test for ActivityPub::FetchRemoteAccountService
* Handle public key and icon/image when embedded/as array/as resolvable URI
* Implement ActivityPub::FetchRemoteStatusService
* Add stubs for more interactions
* Undo activities implemented
* Handle out of order activities
* Hook up ActivityPub to ResolveRemoteAccountService, handle
Update Account activities
* Add fragment IDs to all transient activity serializers
* Add tests and fixes
* Add stubs for missing tests
* Add more tests
* Add more tests
* Revert "Adjust tags and accounts page (#4534)"
This reverts commit a3e53bd442.
* Revert "feat: Cache status height to avoid expensive renders (#4439)"
This reverts commit 8eb6d171e6.
* Revert "Refactor Avatar and AvatarOverlay to have 'account' as prop instead of src and staticSrc (#4526)"
This reverts commit 5942347407.
* Revert "Update dependencies for Ruby (#4543)"
This reverts commit 22db947225.
* Revert "[Docker] Add multicore support to "make" and "bundler" (#4544)"
This reverts commit 5d408fd9aa.
* Revert "It makes no sense to try using invalid or expired link again (#4521)"
This reverts commit 47579ec58c.
* Revert "i18n: Update Polish translation (#4545)"
This reverts commit 3363a05539.
* Revert "Set false to animated options for thumbnail processor (#4547)"
This reverts commit 87f10d476c.
* Allow domain blocks to reject media without silencing or suspending
* Fix typo
* Hide 'Reject media' button when superfluous, instead of disabling it
* Properly hide 'reject media' checkbox on page load if needed
This may happen when resubmitting the domain block form after an error.
* Don't ask whether undoing a media-only block should be retroactive
* Rename :media_only block to :noop
* Display :noop block as None in frontend, allow blocks that do nothing
* Remove 'coding' line auto-added by emacs
* Add Request class with HTTP signature generator
Spec: https://tools.ietf.org/html/draft-cavage-http-signatures-06
* Add HTTP signature verification concern
* Add test for SignatureVerification concern
* Add basic test for Request class
* Make PuSH subscribe/unsubscribe requests use new Request class
Accidentally fix lease_seconds not being set and sent properly, and
change the new minimum subscription duration to 1 day
* Make all PuSH workers use new Request class
* Make Salmon sender use new Request class
* Make FetchLinkService use new Request class
* Make FetchAtomService use the new Request class
* Make Remotable use the new Request class
* Make ResolveRemoteAccountService use the new Request class
* Add more tests
* Allow +-30 seconds window for signed request to remain valid
* Disable time window validation for signed requests, restore 7 days
as PuSH subscription duration (which was previous default due to a bug)
- Use unicode when selecting emoji through picker
- Convert shortcodes to unicode when storing text input server-side
- Do not convert shortcodes in JS anymore
* add a system_font_ui setting on the server
* Plug the system_font_ui on the front-end
* add EN/FR locales for the new setting
* put Roboto after all other fonts
* remove trailing whitespace so CodeClimate is happy
* fix user_spec.rb
* correctly write user_spect this time
* slightly better way of adding the classes
* add comments to the system-font stack for clarification
* use .system-font for the class instead
* don't use multiple lines for comments
* remove trailing whitespace
* use the classnames module for consistency
* use `mastodon-font-sans-serif` instead of Roboto directly
In from_redis method, statuses retrieved from the database was mapped to
the IDs retrieved from Redis. It was equivalent to order from high to low
because those IDs are sorted in the same order.
Statuses are ordered with the ID by default, so we do not have to reorder.
Sorting statuses in the database is even faster since the IDs are indexed
with B-tree.
* Add overview of active sessions
* Better display of browser/platform name
* Improve how browser information is stored and displayed for sessions overview
* Fix test
* Fix#2347 - Bind web UI access token to session
When you logout, session also destroys the access token, so it's no longer
valid. If access token is destroyed some other way, the session is also
destroyed, requiring a re-login.
Fix#1681 - Add scheduler to remove revoked access tokens and grants
* Fix test
* Add overview of active sessions
* Better display of browser/platform name
* Improve how browser information is stored and displayed for sessions overview
* Fix test
* Introduce domains method to Account relation
Account had followers_domains method, which was excessively specific.
Let relation of Account have domains method instead.
* Move follow_mapping in Account to AccountInteractions
* Introduce shared examples for AccountAvatar inclusion
* Cover Account more
* Fix regression from #3842
Simplify the query by omitting all direct statuses. Private statuses
are allowed because they are from accounts we are following (so
by definition)
Resolves#3887 (alternative)
* Adjust test
The classes using Status.as_home_timeline, namely Feed and
PrecomputeFeedService are expected to filter direct statuses as
FanOutWriteService does, but their filtering were incomplete or missing.
This commit solves the problem by filtering direct statuses in
as_home_timeline as the other similar methods such as as_public_timeline
does.
* Add form for account deletion
* If avatar or header are gone from source, remove them
* Add option to have SuspendAccountService remove user record, add tests
* Exclude suspended accounts from search
* Fix#2619 - When redis feed is empty, fall back to database
* Use redis value to return feed from database only while RegenerationWorker
hasn't finished running
* Fix specs
* Replace usage of reject!
```
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:60)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:60)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:60)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:61)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:62)
DEPRECATION WARNING: The behavior of `attribute_changed?` inside of after callbacks will be changing in the next version of Rails. The new return value will reflect the behavior of calling the method after `save` returned (e.g. the opposite of what it returns now). To maintain the current behavior, use `saved_change_to_attribute?` instead. (called from block in <class:Account> at /Users/rene/Workspace/personal/ruby/mastodon/app/models/account.rb:63)
```
Here's PR describing changes to Dirty API https://github.com/rails/rails/pull/25337
* Sort results by the name
* Switch search method to simple `LIKE` matching instead of tsvector/tsquery
Previously we used scores from ts_rank_cd() to sort results, but it didn't work
because the function returns same score for all results. It's not for calculate
similarity of single words. Sometimes this bug even push out exact matching tag
from results.
Additionally, PostgreSQL supports prefix searching with standard btree index.
Using it offers simpler code, but also less index size and some speed.
* Add a StatusFilter class to identify visibility of statuses by accounts
* Extract StatusThreadingConcern from Status
* Clarify purpose of checking for nil account
* Update rails to version 5.1.1
* Run `rails app:update`
* Remove the override of polymorphic activity relationship
* Silence warning about otp_secret attribute being unknown to rails
* We will only introduce form_with where we want to use remote data
* Remove trailing whitespace in i18n mailers
* Use query methods instead of #present? on AR attributes
* Delegate Status#account_domain method
* Delegate Mention #account_username and #account_acct methods
* Move specs for account finder methods to concern spec
* Move account finder methods to concern
* Improve spec wording
* Use more explicit comparison to ensure correct return value
* Add coverage for .find_local! and .find_remote!
* Add some methods to the finder
* Use arel on matching_username method
* Avoid ternary in matching domain method
* Simplify finder methods
* Use an AccountFinder class to simplify lookup
* Set delete_modal preference to true by default
* Does not show confirmation modal if delete_modal is false
* Add ja translation for preference setting page
* @object is not needed
* Remove unneeded dependencies
* Do not call private method
* Prefer #respond_to_missing? over #respond_to?
`#respond_to?` doesn't support `User.settings.method(:method_name)`
* Use find_or_initialize_by instead of
* Introduce recent scope to Status and StreamEntry
Introduce recent scope to Status and StreamEntry as Account has.
* Cover AccountsController more in AccountsController
* Add buttons to block and unblock domain
* Relationship API now returns "domain_blocking" status for accounts,
rename "block entire domain" to "hide entire domain", fix unblocking domain,
do not block notifications from domain-blocked-but-followed people, do
not send Salmons to domain blocked users
* Add test
* Personal domain blocks shouldn't affect Salmon after all, since in this
direction of communication the control is very thin when it comes to
public stuff. Best stay consistent and not affect federation in this way
* Ignore followers and follow request from domain blocked folks,
ensure account domain blocks are not created for empty domain,
and avoid duplicates in validation
* Purge followers when blocking domain (without soft-blocks, since they
are useless here)
* Add tests, fix local timeline being empty when having any domain blocks
* Add <ostatus:conversation /> tag to Atom input/output
Only uses ref attribute (not href) because href would be
the alternate link that's always included also.
Creates new conversation for every non-reply status. Carries
over conversation for every reply. Keeps remote URIs verbatim,
generates local URIs on the fly like the rest of them.
* Conversation muting - prevents notifications that reference a conversation
(including replies, favourites, reblogs) from being created. API endpoints
/api/v1/statuses/:id/mute and /api/v1/statuses/:id/unmute
Currently no way to tell when a status/conversation is muted, so the web UI
only has a "disable notifications" button, doesn't work as a toggle
* Display "Dismiss notifications" on all statuses in notifications column, not just own
* Add "muted" as a boolean attribute on statuses JSON
For now always false on contained reblogs, since it's only relevant for
statuses returned from the notifications endpoint, which are not nested
Remove "Disable notifications" from detailed status view, since it's
only relevant in the notifications column
* Up max class length
* Remove pending test for conversation mute
* Add tests, clean up
* Rename to "mute conversation" and "unmute conversation"
* Raise validation error when trying to mute/unmute status without conversation
* Adding account domain blocks that filter notifications and public timelines
* Add tests for domain blocks in notifications, public timelines
Filter reblogs of blocked domains from home
* Add API for listing and creating account domain blocks
* API for creating/deleting domain blocks, tests for Status#ancestors
and Status#descendants, filter domain blocks from them
* Filter domains in streaming API
* Update account_domain_block_spec.rb
* Add <ostatus:conversation /> tag to Atom input/output
Only uses ref attribute (not href) because href would be
the alternate link that's always included also.
Creates new conversation for every non-reply status. Carries
over conversation for every reply. Keeps remote URIs verbatim,
generates local URIs on the fly like the rest of them.
* Conversation muting - prevents notifications that reference a conversation
(including replies, favourites, reblogs) from being created. API endpoints
/api/v1/statuses/:id/mute and /api/v1/statuses/:id/unmute
Currently no way to tell when a status/conversation is muted, so the web UI
only has a "disable notifications" button, doesn't work as a toggle
* Display "Dismiss notifications" on all statuses in notifications column, not just own
* Add "muted" as a boolean attribute on statuses JSON
For now always false on contained reblogs, since it's only relevant for
statuses returned from the notifications endpoint, which are not nested
Remove "Disable notifications" from detailed status view, since it's
only relevant in the notifications column
* Up max class length
* Remove pending test for conversation mute
* Add tests, clean up
* Rename to "mute conversation" and "unmute conversation"
* Raise validation error when trying to mute/unmute status without conversation
* Add <ostatus:conversation /> tag to Atom input/output
Only uses ref attribute (not href) because href would be
the alternate link that's always included also.
Creates new conversation for every non-reply status. Carries
over conversation for every reply. Keeps remote URIs verbatim,
generates local URIs on the fly like the rest of them.
* Fix conversation migration
* More spec coverage for status before_create
* Prevent n+1 query when generating Atom with the new conversations
* Improve code style
* Remove redundant local variable
* Fix#2027 - Accept own ID for remote follow with and without preceding @
Fix#2177 - Omit leading "acct:" in remote follow redirect template expansion
* Fix test
* Call simple query
* Refactor Account#keypair
* Replace escaped single quote
* Extract similar behavior to method
* Gather the same condition to one block
* Remove not needed receiver
* Dont use raise_error by itself (avoids warning)
* Add coverage for AccountFilter
* Improve coverage and refactor for Subscription#lease_seconds
* Improve coverage and refactor for NotificationMailer
* Simplify assignment of min/max threshold on subscription
* Fix#2473 - Use sidekiq scheduler to refresh PuSH subscriptions instead of cron
Fix an issue where / in domain would raise exception in TagManager#normalize_domain
PuSH subscriptions refresh done in a round-robin way to avoid hammering a single
server's hub in sequence. Correct handling of failures/retries through Sidekiq (see
also #2613). Optimize Account#with_followers scope. Also, since subscriptions
are now delegated to Sidekiq jobs, an uncaught exception will not stop the entire
refreshing operation halfway through
Fix#2702 - Correct user agent header on outgoing http requests
* Add test for SubscribeService
* Extract #expiring_accounts into method
* Make mastodon:push:refresh no-op
* Queues are now defined in sidekiq.yml
* Queues are now in sidekiq.yml
* add annotate to Gemfile
* rails g annotate:install
* configure annotate_models
* add schema info to models
* fix rubocop to add frozen_string_literal
* Add coverage for create with empty acct value
* Add coverage for create with webfinger failure
* Add coverage for create with webfinger providing bad values
* Add coverage for create when webfinger is good
* Add coverage for session[:remote_follow] having data
* Simplify how remote follow pulls acct from session
* Remote follow behaves more like model
* Move the discovery portions of remote follow out of controller
* Check for suspended accounts
* Naive approached to timeline filtering
* Convert allowed_languages into a db column
* Allow users to choose languages to see statuses in
* Style list items as two columns
* Add a hint to explain language filtering preference
In #2110, a new attachment type "unknown" was introduced for
attachments that were rejected due to a domain being blocked using
reject_media. However, the "type" field was never set to "unknown"
because a default value of "0" (image) is set for that column,
causing the `type.blank?` expression to always equal false.
This version uses type_changed? instead, causing the type to be set
to "unknown" unless a type has been explicitly set. This introduces
a small change in behaviour causing the type to be set to unknown
before paperclip calls `before_post_process`. Presumably this
behaviour is more appropriate than the current one because the
attachment type has not been determined by that point.
Included are new tests for `ProcessFeedService` and
`UpdateRemoteProfileService` which now check that remote media is
downloaded for non-blocked domains and is rejected for others.
* Add render_views in more places
* Delegate methods from account to user with allow nil true, so that admin accounts show view renders when missing a user
* Use actual account instances in authorize follow controller spec
* Add rough outline of coverage needed for public timeline
* Specs for visibility, replies, boosts
* Specs for silenced account
* Specs for local_only option
* Specs for blocks and mutes
* Add tentative spec around including other silenced account statuses
* Add with_public_visibility scope
* Add simple coverage for tag_timeline
* Tag timeline includes replies
* Replace tag.statuses with a tagged_with scope in tag timeline method
* Use with_public_visibility in tag timeline
* Extract common scope between public and tag timelines to method
* Extract local domain check to local_only scope
* Extract local_only check to starting scope method
* Move list of excluded from timeline account ids to account model
* Simplify excluded accounts list on account model
* Only join accounts when needed
* Rename method for account specific filtering
* Extract method for account exclusions
* Fix bug where silenced accounts were not including statuses from other silenced accounts
* DRY up filter application from account or no account
* timeline_scope can be private
* Add spec showing that account can find its excluded accounts ids
* Add spec which fails if local_only does not have a left outer join
* rubocop
* OEmbed support for PreviewCard
* Improve ProviderDiscovery code failure treatment
* Do not crawl links if there is a content warning, since those
don't display a link card anyway
* Reset db schema
* Fresh migrate
* Fix rubocop style issues
Fix#1681 - return existing access token when applicable instead of creating new
* Fix test
* Extract http client to helper
* Improve oembed controller
* Fixes#1985
- add migration AddMediaAttachmentMeta, which add meta field to media_attachments
- before saving attachment, set file meta if needed
- add meta in api
* add spec
* align the “size” format for image and video
* fix code climate
* fixes media_attachment_spec.rb
* Fix#2119 - Whenever about to send a HTTP request, normalize the URI
* Add test for IDN request in FetchLinkCardService
* Perform IDN normalization on domains before they are stored in the DB
* Expose media attachments on reported statuses directly
* Comment out unused bulk report checkbox. Add title to report comment for viewing full comment. Add 'contents' column, with icons and numerical indicators to show the number of referenced statuses and media attachments in the report
* Link account name on authorize_follow card back to account
* Add localisation string for report_contents
* Show new admin accounts card partial on report view. Apply simple_format to report comment so newlines are preserved.
* Add new admin accounts card partial, for display quick useful admin stats (e.g. report history, moderation status).
* Fix localized variable
* Make private toots get PuSHed to subscription URLs that belong to domains where you have approved followers
* Authorized followers controller, stub for bulk action
* Soft block in the background
* Add simple test for new controller
* Rename Settings::FollowersController to Settings::FollowerDomainsController, paginate results,
rename "private" post setting to "followers-only", fix pagination style, improve post privacy
preferences style, improve warning style
* Extract compose form warnings into own container, show warning when posting to followers-only with unlocked account
* Clean up collapsible components
* Expose user Outboxes and AS2 representations of statuses
* Save work thus far.
* Fix bad merge.
* Save my work
* Clean up pagination.
* First test working.
* Add tests.
* Add Forbidden error template.
* Revert yarn.lock changes.
* Fix code style deviations and use localized instead of hardcoded English text.
* Shows confirmed status in list.
* Adds ability to confirm users in admin UI.
* Added new english translations.
* Addresses feedback from #2245.
* More feedback.
* Fix#2108 - Fix gif uploads
Add specs for media attachment gifv conversion
* Add ffmpeg to travis
* Make travis install ffmpeg, not libav
* Switch travis to trusty
* Add a ReportFilter class
* Add reports and targeted_reports relationships to Account
* Use ReportFilter from admin/reports controller
* Link to admin/reports filtered views from admin account show view
* Add indexes to reports.account_id and reports.target_account_id
* Remove unused method #set_counters_maps from api controller
* Remove unused method #set_account_counters_maps from api controller
* Remove unused method Account#followers_domains
* Remove unused User.prolific scope
* Add mastodon:users:admins task to list all admin emails
* Use interpolated query style in Account.triadic_closures
* Coverage for Account.triadic_closures
This introduces a new per-user preference called
"Auto-play animated GIFs", which is enabled by default. When a
user disables this setting, gifs in toots become click-to-play.
Previews of animated gifs were changed to display the video play
button so that users can distinguish them from regular images.
This setting also affects account avatars in the detailed account
view, which was changed to use the same hover-to-play mechanism
that is used for animated avatars in timelines.
Fixes#1652
* Rename admin.domain_block to admin.domain_blocks in prep for i18n improvement
* Use implicit controller/action path for i18n in admin/domain_blocks
* Add DomainBlock#accounts has_many
* Avoid i18n health warning for `en` locale by using symbol scope with :count
* Remove unused i18n key: plaintext_secret_html
* Remove unused i18n key two_factor_auth.warning
* Remove final will_paginate i18n keys
* Remove unused key two_factor_auth.recovery_codes
* Remove unused key: admin.reports.comment.none
* Remove unused reports. i18n namespace (moved to admin.reports)
* Ignore keys from locales which override activemodel and activerecord errors
* Revert "Remove unused key: admin.reports.comment.none"
This reverts commit 350ef2685fadc069e619bb6d1066190de195d942.
* Update i18n key reference to match moved location
* Add missing `en` keys to i18n
* Tell i18n-tasks to ignore missing attributes that dont need overwriting
* Add i18n-tasks unused to travis
Create MediaAttachment but without actual file download when domain is blocked with reject_media set to true
Clean up old media files when creating a new domain block with reject_media set to true
Return remote_url in media attachments API if local file is not present
Undo domain block action in admin UI
Ability to enable reject_media from admin UI
* Add recovery code support for two-factor auth
When users enable two-factor auth, the app now generates ten
single-use recovery codes. Users are encouraged to print the codes
and store them in a safe place.
The two-factor prompt during login now accepts both OTP codes and
recovery codes.
The two-factor settings UI allows users to regenerated lost
recovery codes. Users who have set up two-factor auth prior to
this feature being added can use it to generate recovery codes
for the first time.
Fixes#563 and fixes#987
* Set OTP_SECRET in test enviroment
* add missing .html to view file names
* Simplify admin/reports controller filtering for index
* Rename parameter to resolved
* Fix issue where reports view could not access filter_link_to
* Add coverage for admin/reports controller
* DRY up resolution of related reports for target account
* Clean up admin/reports routes
* Add Report#statuses method
* DRY up current account action taken params
* Rubocop styles
* Remove unused account_params method in admin/accounts controller
* Introduce AccountFilter to find accounts
* Use AccountFilter in admin/accounts controller
* Use more restful routes admin silence and suspension area
* Add admin/silences and admin/suspensions controllers
* Add basic coverage for settings/exports controller
* Remove unused @account variable from settings/exports controller
* Add coverage for download export actions
* Remove deprecated `render :text` in favor of `send_data` for csv downloads
* Add model to handle exports
* Use Export class in settings/exports controller
* Simplify settings/exports controller methods
* Move settings/export to more restful routes
* When avatar/header are GIF, generate static versions.
Account API returns "avatar"/"avatar_static", "header"/"header_static"
Static version is the same as original for other cases
Web UI de-animates avatars in toots, lists of users
Fix#441, fix#596, prerequisite for #1064
* Fix JS test
* Add rake task to generate static avatars/headers from GIF ones, add test
* Clean up SQL output in Tag and Account search methods
* Add basic coverage for Tag.search_for
* Add coverage for Account.search_for
* Add coverage for Account.advanced_search_for
Checking reblog vs original status was happening in multiple places
across the app. For views, this logic was encapsulated in a helper
method named `proper_status` but in the other layers of the app, the
logic was duplicated.
Because the logic is used at all layers of the app, we extracted it into
a `Status#proper` method on the model and changed all uses of the logic
to use this method. There is now a single source of truth for this
condition.
We added test coverage to untested methods that got refactored.
* Rewrite Atom generation from stream entries to use Ox instead of Nokogiri::Builder
StreamEntry is now limited to only statuses, which allows some optimization. Removed
extra queries on AccountsController#show. AtomSerializer instead of AtomBuilderHelper
used in AccountsController#show, StreamEntriesController#show, StreamEntryRenderer
and PubSubHubbub::DistributionWorker
PubSubHubbub::DistributionWorker moves n+1 DomainBlock query to PubSubHubbub::DeliveryWorker
instead.
All Salmon slaps that aren't based on StreamEntry still use AtomBuilderHelper and Nokogiri
* All Salmon slaps now use Ox instead of Nokogiri. No touch from status on account
before. In the API, attachments now can be either image, video or gifv. Gifv
is to be treated like images in terms of behaviour, but are videos by file
type.
"whole known network" which is what public timeline used to be
Only domain blocks with suspend severity will block PuSH subscriptions
Silenced accounts should not appear in conversations unless followed
to only those from local users; Add link to "extended information" to
getting started in the UI; Add defaults for posting privacy; Change
how publish button looks depending on posting privacy chosen
fix ProcessFeedService pushing status into distribution if called a second time
while the first is still running (i.e. when a PuSH comes after a Salmon slap),
fix not running escape on spoiler text before emojify
Federate spoiler_text using warning attribute on <content /> instead of a <category term="spoiler" />
Clean up schema file from accidental development migrations
application website validation, don't link to app website if website isn't set,
also comment out animated boost icon from #464 until it's consistent with non-animated version
Filters out hidden stream entries from Atom feed
Blocks now generate hidden stream entries, can be used to federate blocks
Private statuses cannot be reblogged (generates generic 422 error for now)
POST /api/v1/statuses now takes visibility=(public|unlisted|private) param instead of unlisted boolean
Statuses JSON now contains visibility=(public|unlisted|private) field
for avatars/headers, resize avatars down to 120x120 instead of 300x300. Set cache headers on S3 stuff, also
make it private (aka only accessible via expiring links to prevent hotlinking)
resources that require a user context vs those that don't (such as public timeline)
/api/v1/statuses/public -> /api/v1/timelines/public
/api/v1/statuses/home -> /api/v1/timelines/home
/api/v1/statuses/mentions -> /api/v1/timelines/mentions
/api/v1/statuses/tag/:tag -> /api/v1/timelines/tag/:tag
POST /api/statuses Params: status (text contents), in_reply_to_id (optional)
GET /api/statuses/:id
POST /api/statuses/:id/reblog
GET /api/accounts/:id
GET /api/accounts/:id/following
GET /api/accounts/:id/followers
POST /api/accounts/:id/follow
POST /api/accounts/:id/unfollow
POST /api/follows Params: uri (e.g. user@domain)
OAuth authentication is currently disabled, but the API can be used with HTTP Auth.
