.browserslistrc

@@ -1,7 +0,0 @@
-[production]
-defaults
-not IE 11
-not dead
-
-[development]
-supports es6-module

.circleci/config.yml

@@ -133,12 +133,6 @@ jobs:
       - run:
           command: ./bin/rails tests:migrations:populate_v2_4
           name: Populate database with test data
-      - run:
-          command: ./bin/rails db:migrate VERSION=20180707154237
-          name: Run migrations up to v2.4.3
-      - run:
-          command: ./bin/rails tests:migrations:populate_v2_4_3
-          name: Populate database with test data
       - run:
           command: ./bin/rails db:migrate
           name: Run all remaining migrations
@@ -173,22 +167,14 @@ jobs:
       - run:
           command: ./bin/rails tests:migrations:populate_v2_4
           name: Populate database with test data
-      - run:
-          command: ./bin/rails db:migrate VERSION=20180707154237
-          name: Run migrations up to v2.4.3
-          environment:
-            SKIP_POST_DEPLOYMENT_MIGRATIONS: true
-      - run:
-          command: ./bin/rails tests:migrations:populate_v2_4_3
-          name: Populate database with test data
       - run:
           command: ./bin/rails db:migrate
-          name: Run all remaining pre-deployment migrations
+          name: Run all pre-deployment migrations
           environment:
             SKIP_POST_DEPLOYMENT_MIGRATIONS: true
       - run:
           command: ./bin/rails db:migrate
-          name: Run all post-deployment migrations
+          name: Run all post-deployment remaining migrations
       - run:
           command: ./bin/rails tests:migrations:check_database
           name: Check migration result

.codeclimate.yml

@@ -26,11 +26,13 @@ plugins:
   bundler-audit:
     enabled: true
   eslint:
-    enabled: false
+    enabled: true
+    channel: eslint-7
   rubocop:
-    enabled: false
+    enabled: true
+    channel: rubocop-1-9-1
   sass-lint:
-    enabled: false
+    enabled: true
 exclude_patterns:
   - spec/
   - vendor/asset/

.devcontainer/devcontainer.json

@@ -11,8 +11,7 @@
   "extensions": [
     "EditorConfig.EditorConfig",
     "dbaeumer.vscode-eslint",
-    "rebornix.Ruby",
-    "webben.browserslist"
+    "rebornix.Ruby"
   ],
 
   // Use 'forwardPorts' to make a list of ports inside the container available locally.
@@ -20,7 +19,7 @@
   "forwardPorts": [3000, 4000],
 
   // Use 'postCreateCommand' to run commands after the container is created.
-  "postCreateCommand": "bundle install --path vendor/bundle && yarn install && git checkout -- Gemfile.lock && ./bin/rails db:setup",
+  "postCreateCommand": "bundle install --path vendor/bundle && yarn install && ./bin/rails db:setup",
 
   // Comment out to connect as root instead. More info: https://aka.ms/vscode-remote/containers/non-root.
   "remoteUser": "vscode"

.devcontainer/docker-compose.yml

@@ -27,7 +27,6 @@ services:
       ES_ENABLED: 'true'
       ES_HOST: es
       ES_PORT: '9200'
-      LIBRE_TRANSLATE_ENDPOINT: http://libretranslate:5000
     # Overrides default command so things don't shut down after the process ends.
     command: sleep infinity
     networks:
@@ -73,12 +72,6 @@ services:
         soft: -1
         hard: -1
 
-  libretranslate:
-    image: libretranslate/libretranslate:v1.2.9
-    restart: unless-stopped
-    networks:
-      - internal_network
-
 volumes:
   postgres-data:
   redis-data:

.env.nanobox

@@ -0,0 +1,254 @@
+# Service dependencies
+# You may set REDIS_URL instead for more advanced options
+REDIS_HOST=$DATA_REDIS_HOST
+REDIS_PORT=6379
+# REDIS_DB=0
+
+# You may set DATABASE_URL instead for more advanced options
+DB_HOST=$DATA_DB_HOST
+DB_USER=$DATA_DB_USER
+DB_NAME=gonano
+DB_PASS=$DATA_DB_PASS
+DB_PORT=5432
+
+# DATABASE_URL=postgresql://$DATA_DB_USER:$DATA_DB_PASS@$DATA_DB_HOST/gonano
+
+# Optional Elasticsearch configuration
+ES_ENABLED=true
+ES_HOST=$DATA_ELASTIC_HOST
+ES_PORT=9200
+
+BIND=0.0.0.0
+
+# Federation
+# Note: Changing LOCAL_DOMAIN at a later time will cause unwanted side effects, including breaking all existing federation.
+# LOCAL_DOMAIN should *NOT* contain the protocol part of the domain e.g https://example.com.
+LOCAL_DOMAIN=${APP_NAME}.nanoapp.io
+
+# Changing LOCAL_HTTPS in production is no longer supported. (Mastodon will always serve https:// links)
+
+# Use this only if you need to run mastodon on a different domain than the one used for federation.
+# You can read more about this option on https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Serving_a_different_domain.md
+# DO *NOT* USE THIS UNLESS YOU KNOW *EXACTLY* WHAT YOU ARE DOING.
+# WEB_DOMAIN=mastodon.example.com
+
+# Use this if you want to have several aliases handler@example1.com
+# handler@example2.com etc. for the same user. LOCAL_DOMAIN should not
+# be added. Comma separated values
+# ALTERNATE_DOMAINS=example1.com,example2.com
+
+# Application secrets
+# Generate each with the `rake secret` task (`nanobox run bundle exec rake secret`)
+SECRET_KEY_BASE=$SECRET_KEY_BASE
+OTP_SECRET=$OTP_SECRET
+
+# VAPID keys (used for push notifications)
+# You can generate the keys using the following command (first is the private key, second is the public one)
+# You should only generate this once per instance. If you later decide to change it, all push subscription will
+# be invalidated, requiring the users to access the website again to resubscribe.
+#
+# Generate with `rake mastodon:webpush:generate_vapid_key` task (`nanobox run bundle exec rake mastodon:webpush:generate_vapid_key`)
+#
+# For more information visit https://rossta.net/blog/using-the-web-push-api-with-vapid.html
+VAPID_PRIVATE_KEY=$VAPID_PRIVATE_KEY
+VAPID_PUBLIC_KEY=$VAPID_PUBLIC_KEY
+
+# Registrations
+# Single user mode will disable registrations and redirect frontpage to the first profile
+# SINGLE_USER_MODE=true
+# Prevent registrations with following e-mail domains
+# EMAIL_DOMAIN_BLACKLIST=example1.com|example2.de|etc
+# Only allow registrations with the following e-mail domains
+# EMAIL_DOMAIN_WHITELIST=example1.com|example2.de|etc
+
+# Optionally change default language
+# DEFAULT_LOCALE=de
+
+# E-mail configuration
+# Note: Mailgun and SparkPost (https://sparkpo.st/smtp) each have good free tiers
+# If you want to use an SMTP server without authentication (e.g local Postfix relay)
+# then set SMTP_AUTH_METHOD and SMTP_OPENSSL_VERIFY_MODE to 'none' and
+# *comment* SMTP_LOGIN and SMTP_PASSWORD (leaving them blank is not enough).
+SMTP_SERVER=$SMTP_SERVER
+SMTP_PORT=587
+SMTP_LOGIN=$SMTP_LOGIN
+SMTP_PASSWORD=$SMTP_PASSWORD
+SMTP_FROM_ADDRESS=notifications@${APP_NAME}.nanoapp.io
+#SMTP_REPLY_TO=
+#SMTP_DOMAIN= # defaults to LOCAL_DOMAIN
+#SMTP_DELIVERY_METHOD=smtp # delivery method can also be sendmail
+#SMTP_AUTH_METHOD=plain
+#SMTP_CA_FILE=/etc/ssl/certs/ca-certificates.crt
+#SMTP_OPENSSL_VERIFY_MODE=peer
+#SMTP_ENABLE_STARTTLS_AUTO=true
+#SMTP_TLS=true
+
+# Optional user upload path and URL (images, avatars). Default is :rails_root/public/system. If you set this variable, you are responsible for making your HTTP server (eg. nginx) serve these files.
+# PAPERCLIP_ROOT_PATH=/var/lib/mastodon/public-system
+# PAPERCLIP_ROOT_URL=/system
+
+# Optional asset host for multi-server setups
+# The asset host must allow cross origin request from WEB_DOMAIN or LOCAL_DOMAIN
+# if WEB_DOMAIN is not set. For example, the server may have the
+# following header field:
+# Access-Control-Allow-Origin: https://example.com/
+# CDN_HOST=https://assets.example.com
+
+# S3 (optional)
+# The attachment host must allow cross origin request from WEB_DOMAIN or
+# LOCAL_DOMAIN if WEB_DOMAIN is not set. For example, the server may have the
+# following header field:
+# Access-Control-Allow-Origin: https://192.168.1.123:9000/
+# S3_ENABLED=true
+# S3_BUCKET=
+# AWS_ACCESS_KEY_ID=
+# AWS_SECRET_ACCESS_KEY=
+# S3_REGION=
+# S3_PROTOCOL=http
+# S3_HOSTNAME=192.168.1.123:9000
+
+# S3 (Minio Config (optional) Please check Minio instance for details)
+# The attachment host must allow cross origin request - see the description
+# above.
+# S3_ENABLED=true
+# S3_BUCKET=
+# AWS_ACCESS_KEY_ID=
+# AWS_SECRET_ACCESS_KEY=
+# S3_REGION=
+# S3_PROTOCOL=https
+# S3_HOSTNAME=
+# S3_ENDPOINT=
+# S3_SIGNATURE_VERSION=
+
+# Google Cloud Storage (optional)
+# Use S3 compatible API. Since GCS does not support Multipart Upload,
+# increase the value of S3_MULTIPART_THRESHOLD to disable Multipart Upload.
+# The attachment host must allow cross origin request - see the description
+# above.
+# S3_ENABLED=true
+# AWS_ACCESS_KEY_ID=
+# AWS_SECRET_ACCESS_KEY=
+# S3_REGION=
+# S3_PROTOCOL=https
+# S3_HOSTNAME=storage.googleapis.com
+# S3_ENDPOINT=https://storage.googleapis.com
+# S3_MULTIPART_THRESHOLD=52428801 # 50.megabytes
+
+# Swift (optional)
+# The attachment host must allow cross origin request - see the description
+# above.
+# SWIFT_ENABLED=true
+# SWIFT_USERNAME=
+# For Keystone V3, the value for SWIFT_TENANT should be the project name
+# SWIFT_TENANT=
+# SWIFT_PASSWORD=
+# Some OpenStack V3 providers require PROJECT_ID (optional)
+# SWIFT_PROJECT_ID=
+# Keystone V2 and V3 URLs are supported. Use a V3 URL if possible to avoid
+# issues with token rate-limiting during high load.
+# SWIFT_AUTH_URL=
+# SWIFT_CONTAINER=
+# SWIFT_OBJECT_URL=
+# SWIFT_REGION=
+# Defaults to 'default'
+# SWIFT_DOMAIN_NAME=
+# Defaults to 60 seconds. Set to 0 to disable
+# SWIFT_CACHE_TTL=
+
+# Optional alias for S3 (e.g. to serve files on a custom domain, possibly using Cloudfront or Cloudflare)
+# S3_ALIAS_HOST=
+
+# Streaming API integration
+# STREAMING_API_BASE_URL=
+
+# Advanced settings
+# If you need to use pgBouncer, you need to disable prepared statements:
+# PREPARED_STATEMENTS=false
+
+# Cluster number setting for streaming API server.
+# If you comment out following line, cluster number will be `numOfCpuCores - 1`.
+# STREAMING_CLUSTER_NUM=1
+
+# Docker mastodon user
+# If you use Docker, you may want to assign UID/GID manually.
+# UID=1000
+# GID=1000
+
+# LDAP authentication (optional)
+# LDAP_ENABLED=true
+# LDAP_HOST=localhost
+# LDAP_PORT=389
+# LDAP_METHOD=simple_tls
+# LDAP_BASE=
+# LDAP_BIND_DN=
+# LDAP_PASSWORD=
+# LDAP_UID=cn
+# LDAP_MAIL=mail
+# LDAP_SEARCH_FILTER=(|(%{uid}=%{email})(%{mail}=%{email}))
+# LDAP_UID_CONVERSION_ENABLED=true
+# LDAP_UID_CONVERSION_SEARCH=., -
+# LDAP_UID_CONVERSION_REPLACE=_
+
+# PAM authentication (optional)
+# PAM authentication uses for the email generation the "email" pam variable
+# and optional as fallback PAM_DEFAULT_SUFFIX
+# The pam environment variable "email" is provided by:
+# https://github.com/devkral/pam_email_extractor
+# PAM_ENABLED=true
+# Fallback email domain for email address generation (LOCAL_DOMAIN by default)
+# PAM_EMAIL_DOMAIN=example.com
+# Name of the pam service (pam "auth" section is evaluated)
+# PAM_DEFAULT_SERVICE=rpam
+# Name of the pam service used for checking if an user can register (pam "account" section is evaluated) (nil (disabled) by default)
+# PAM_CONTROLLED_SERVICE=rpam
+
+# Optional CAS authentication (cf. omniauth-cas) :
+# CAS_ENABLED=true
+# CAS_URL=https://sso.myserver.com/
+# CAS_HOST=sso.myserver.com/
+# CAS_PORT=443
+# CAS_SSL=true
+# CAS_VALIDATE_URL=
+# CAS_CALLBACK_URL=
+# CAS_LOGOUT_URL=
+# CAS_LOGIN_URL=
+# CAS_UID_FIELD='user'
+# CAS_CA_PATH=
+# CAS_DISABLE_SSL_VERIFICATION=false
+# CAS_UID_KEY='user'
+# CAS_NAME_KEY='name'
+# CAS_EMAIL_KEY='email'
+# CAS_NICKNAME_KEY='nickname'
+# CAS_FIRST_NAME_KEY='firstname'
+# CAS_LAST_NAME_KEY='lastname'
+# CAS_LOCATION_KEY='location'
+# CAS_IMAGE_KEY='image'
+# CAS_PHONE_KEY='phone'
+# CAS_SECURITY_ASSUME_EMAIL_IS_VERIFIED=true
+
+# Optional SAML authentication (cf. omniauth-saml)
+# SAML_ENABLED=true
+# SAML_ACS_URL=http://localhost:3000/auth/auth/saml/callback
+# SAML_ISSUER=https://example.com
+# SAML_IDP_SSO_TARGET_URL=https://idp.testshib.org/idp/profile/SAML2/Redirect/SSO
+# SAML_IDP_CERT=
+# SAML_IDP_CERT_FINGERPRINT=
+# SAML_NAME_IDENTIFIER_FORMAT=
+# SAML_CERT=
+# SAML_PRIVATE_KEY=
+# SAML_SECURITY_WANT_ASSERTION_SIGNED=true
+# SAML_SECURITY_WANT_ASSERTION_ENCRYPTED=true
+# SAML_SECURITY_ASSUME_EMAIL_IS_VERIFIED=true
+# SAML_ATTRIBUTES_STATEMENTS_UID="urn:oid:0.9.2342.19200300.100.1.1"
+# SAML_ATTRIBUTES_STATEMENTS_EMAIL="urn:oid:1.3.6.1.4.1.5923.1.1.1.6"
+# SAML_ATTRIBUTES_STATEMENTS_FULL_NAME="urn:oid:2.16.840.1.113730.3.1.241"
+# SAML_ATTRIBUTES_STATEMENTS_FIRST_NAME="urn:oid:2.5.4.42"
+# SAML_ATTRIBUTES_STATEMENTS_LAST_NAME="urn:oid:2.5.4.4"
+# SAML_UID_ATTRIBUTE="urn:oid:0.9.2342.19200300.100.1.1"
+# SAML_ATTRIBUTES_STATEMENTS_VERIFIED=
+# SAML_ATTRIBUTES_STATEMENTS_VERIFIED_EMAIL=
+
+# Use HTTP proxy for outgoing request (optional)
+# http_proxy=http://gateway.local:8118
+# Access control for hidden service.
+# ALLOW_ACCESS_TO_HIDDEN_SERVICE=true

.env.production.sample

@@ -17,7 +17,7 @@
 LOCAL_DOMAIN=example.com
 
 # Use this only if you need to run mastodon on a different domain than the one used for federation.
-# You can read more about this option on https://docs.joinmastodon.org/admin/config/#web-domain
+# You can read more about this option on https://github.com/tootsuite/documentation/blob/master/Running-Mastodon/Serving_a_different_domain.md
 # DO *NOT* USE THIS UNLESS YOU KNOW *EXACTLY* WHAT YOU ARE DOING.
 # WEB_DOMAIN=mastodon.example.com
 
@@ -247,7 +247,7 @@ SMTP_FROM_ADDRESS=notifications@example.com
 # ---------------
 # Various ways to customize Mastodon's behavior
 # ---------------
-
+ 
 # Maximum allowed character count
 MAX_TOOT_CHARS=500
 
@@ -279,25 +279,13 @@ MAX_POLL_OPTION_CHARS=100
 # Only relevant when elasticsearch is installed
 # MAX_SEARCH_RESULTS=20
 
-# Maximum hashtags to display
-# Customize the number of hashtags shown in 'Explore'
-# MAX_TRENDING_TAGS=10
-
 # Maximum custom emoji file sizes
 # If undefined or smaller than MAX_EMOJI_SIZE, the value
 # of MAX_EMOJI_SIZE will be used for MAX_REMOTE_EMOJI_SIZE
 # Units are in bytes
-# MAX_EMOJI_SIZE=262144
-# MAX_REMOTE_EMOJI_SIZE=262144
+MAX_EMOJI_SIZE=51200
+MAX_REMOTE_EMOJI_SIZE=204800
 
 # Optional hCaptcha support
 # HCAPTCHA_SECRET_KEY=
 # HCAPTCHA_SITE_KEY=
-
-# IP and session retention
-# -----------------------
-# Make sure to modify the scheduling of ip_cleanup_scheduler in config/sidekiq.yml
-# to be less than daily if you lower IP_RETENTION_PERIOD below two days (172800).
-# -----------------------
-IP_RETENTION_PERIOD=31556952
-SESSION_RETENTION_PERIOD=31556952

.eslintrc.js

@@ -12,7 +12,7 @@ module.exports = {
     ATTACHMENT_HOST: false,
   },
 
-  parser: '@babel/eslint-parser',
+  parser: 'babel-eslint',
 
   plugins: [
     'react',
@@ -27,7 +27,7 @@ module.exports = {
       experimentalObjectRestSpread: true,
       jsx: true,
     },
-    ecmaVersion: 2021,
+    ecmaVersion: 2018,
   },
 
   settings: {

.github/ISSUE_TEMPLATE/1.bug_report.yml

@@ -31,11 +31,6 @@ body:
       description: What happened?
     validations:
       required: true
-  - type: textarea
-    attributes:
-      label: Detailed description
-    validations:
-      required: false
   - type: textarea
     attributes:
       label: Specifications
@@ -43,14 +38,5 @@ body:
         What version or commit hash of Mastodon did you find this bug in?
 
         If a front-end issue, what browser and operating systems were you using?
-      placeholder: |
-        Mastodon 3.5.3 (or Edge)
-        Ruby 2.7.6 (or v3.1.2)
-        Node.js 16.18.0
-
-        Google Chrome 106.0.5249.119
-        Firefox 105.0.3
-        
-        etc...
     validations:
       required: true

.github/ISSUE_TEMPLATE/config.yml

@@ -2,4 +2,7 @@ blank_issues_enabled: false
 contact_links:
   - name: GitHub Discussions
     url: https://github.com/mastodon/mastodon/discussions
-    about: Please ask and answer questions here.
+    about: Please ask and answer questions here.
+  - name: Bug Bounty Program
+    url: https://app.intigriti.com/programs/mastodon/mastodonio/detail
+    about: Please report security vulnerabilities here.

.github/stylelint-matcher.json

@@ -1,21 +0,0 @@
-{
-  "problemMatcher": [
-    {
-      "owner": "stylelint",
-      "pattern": [
-        {
-          "regexp": "^([^\\s].*)$",
-          "file": 1
-        },
-        {
-          "regexp": "^\\s+((\\d+):(\\d+))?\\s+(✖|×)\\s+(.*)\\s{2,}(.*)$",
-          "line": 2,
-          "column": 3,
-          "message": 5,
-          "code": 6,
-          "loop": true
-        }
-      ]
-    }
-  ]
-}

.github/workflows/build-image.yml

@@ -10,39 +10,34 @@ on:
     paths:
       - .github/workflows/build-image.yml
       - Dockerfile
-permissions:
-  contents: read
-  packages: write
-
 jobs:
   build-image:
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v3
-      - uses: docker/setup-qemu-action@v2
-      - uses: docker/setup-buildx-action@v2
-      - uses: docker/login-action@v2
+      - uses: actions/checkout@v2
+      - uses: docker/setup-qemu-action@v1
+      - uses: docker/setup-buildx-action@v1
+      - uses: docker/login-action@v1
         with:
           registry: ghcr.io
           username: ${{ github.repository_owner }}
           password: ${{ secrets.GITHUB_TOKEN }}
         if: github.event_name != 'pull_request'
-      - uses: docker/metadata-action@v4
+      - uses: docker/metadata-action@v3
         id: meta
         with:
           images: ghcr.io/${{ github.repository_owner }}/mastodon
           flavor: |
-            latest=auto
+            latest=true
           tags: |
             type=edge,branch=main
-            type=pep440,pattern={{raw}}
-            type=pep440,pattern=v{{major}}.{{minor}}
+            type=match,pattern=v(.*),group=0
             type=ref,event=pr
-      - uses: docker/build-push-action@v3
+      - uses: docker/build-push-action@v2
         with:
           context: .
           platforms: linux/amd64,linux/arm64
           push: ${{ github.event_name != 'pull_request' }}
           tags: ${{ steps.meta.outputs.tags }}
-          cache-from: type=registry,ref=ghcr.io/${{ github.repository_owner }}/mastodon:edge
+          cache-from: type=registry,ref=ghcr.io/${{ github.repository_owner }}/mastodon:latest
           cache-to: type=inline

.github/workflows/check-i18n.yml

@@ -9,15 +9,12 @@ on:
 env:
   RAILS_ENV: test
 
-permissions:
-  contents: read
-
 jobs:
   check-i18n:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v2
       - name: Install system dependencies
         run: |
           sudo apt-get update

.github/workflows/linter.yml

@@ -1,83 +0,0 @@
----
-#################################
-#################################
-## Super Linter GitHub Actions ##
-#################################
-#################################
-name: Lint Code Base
-
-#
-# Documentation:
-# https://docs.github.com/en/actions/learn-github-actions/workflow-syntax-for-github-actions
-#
-
-#############################
-# Start the job on all push #
-#############################
-on:
-  push:
-    branches-ignore: [main]
-    # Remove the line above to run when pushing to master
-  pull_request:
-    branches: [main]
-
-###############
-# Set the Job #
-###############
-permissions:
-  checks: write
-  contents: read
-  pull-requests: write
-  statuses: write
-
-jobs:
-  build:
-    # Name the Job
-    name: Lint Code Base
-    # Set the agent to run on
-    runs-on: ubuntu-latest
-
-    ##################
-    # Load all steps #
-    ##################
-    steps:
-      ##########################
-      # Checkout the code base #
-      ##########################
-      - name: Checkout Code
-        uses: actions/checkout@v3
-        with:
-          # Full git history is needed to get a proper list of changed files within `super-linter`
-          fetch-depth: 0
-
-      - name: Set-up Node.js
-        uses: actions/setup-node@v3
-        with:
-          node-version: 16.x
-          cache: yarn
-      - name: Install dependencies
-        run: yarn install --frozen-lockfile
-      - name: Set-up RuboCop Problem Mathcher
-        uses: r7kamura/rubocop-problem-matchers-action@v1
-      - name: Set-up Stylelint Problem Matcher
-        uses: xt0rted/stylelint-problem-matcher@v1
-      # https://github.com/xt0rted/stylelint-problem-matcher/issues/360
-      - run: echo "::add-matcher::.github/stylelint-matcher.json" 
-
-      ################################
-      # Run Linter against code base #
-      ################################
-      - name: Lint Code Base
-        uses: github/super-linter@v4
-        env:
-          CSS_FILE_NAME: stylelint.config.js
-          DEFAULT_BRANCH: main
-          NO_COLOR: 1 # https://github.com/xt0rted/stylelint-problem-matcher/issues/360
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-          JAVASCRIPT_ES_CONFIG_FILE: .eslintrc.js
-          LINTER_RULES_PATH: .
-          RUBY_CONFIG_FILE: .rubocop.yml
-          VALIDATE_ALL_CODEBASE: false
-          VALIDATE_CSS: true
-          VALIDATE_JAVASCRIPT_ES: true
-          VALIDATE_RUBY: true

.github/workflows/test-chart.yml

@@ -1,138 +0,0 @@
-# This is a GitHub workflow defining a set of jobs with a set of steps.
-# ref: https://docs.github.com/en/actions/using-workflows/workflow-syntax-for-github-actions
-#
-name: Test chart
-
-on:
-  pull_request:
-    paths:
-      - "chart/**"
-      - "!**.md"
-      - ".github/workflows/test-chart.yml"
-  push:
-    paths:
-      - "chart/**"
-      - "!**.md"
-      - ".github/workflows/test-chart.yml"
-    branches-ignore:
-      - "dependabot/**"
-  workflow_dispatch:
-
-permissions:
-  contents: read
-
-defaults:
-  run:
-    working-directory: chart
-
-jobs:
-  lint-templates:
-    runs-on: ubuntu-22.04
-
-    steps:
-      - uses: actions/checkout@v3
-      - uses: actions/setup-python@v4
-        with:
-          python-version: "3.x"
-
-      - name: Install dependencies (yamllint)
-        run: pip install yamllint
-
-      - run: helm dependency update
-
-      - name: helm lint
-        run: |
-          helm lint . \
-              --values dev-values.yaml
-
-      - name: helm template
-        run: |
-          helm template . \
-              --values dev-values.yaml \
-              --output-dir rendered-templates
-
-      - name: yamllint (only on templates we manage)
-        run: |
-          rm -rf rendered-templates/mastodon/charts
-
-          yamllint rendered-templates \
-            --config-data "{rules: {indentation: {spaces: 2}, line-length: disable}}"
-
-  # This job helps us validate that rendered templates are valid k8s resources
-  # against a k8s api-server, via "helm template --validate", but also that a
-  # basic configuration can be used to successfully startup mastodon.
-  #
-  test-install:
-    runs-on: ubuntu-22.04
-    timeout-minutes: 15
-
-    strategy:
-      fail-fast: false
-      matrix:
-        include:
-          # k3s-channel reference: https://update.k3s.io/v1-release/channels
-          - k3s-channel: latest
-          - k3s-channel: stable
-
-          # This represents the oldest configuration we test against.
-          #
-          # The k8s version chosen is based on the oldest still supported k8s
-          # version among two managed k8s services, GKE, EKS.
-          # - GKE: https://endoflife.date/google-kubernetes-engine
-          # - EKS: https://endoflife.date/amazon-eks
-          #
-          # The helm client's version can influence what helper functions is
-          # available for use in the templates, currently we need v3.6.0 or
-          # higher.
-          #
-          - k3s-channel: v1.21
-            helm-version: v3.6.0
-
-    steps:
-      - uses: actions/checkout@v3
-
-      # This action starts a k8s cluster with NetworkPolicy enforcement and
-      # installs both kubectl and helm.
-      #
-      # ref: https://github.com/jupyterhub/action-k3s-helm#readme
-      #
-      - uses: jupyterhub/action-k3s-helm@v3
-        with:
-          k3s-channel: ${{ matrix.k3s-channel }}
-          helm-version: ${{ matrix.helm-version }}
-          metrics-enabled: false
-          traefik-enabled: false
-          docker-enabled: false
-
-      - run: helm dependency update
-
-      # Validate rendered helm templates against the k8s api-server
-      - name: helm template --validate
-        run: |
-          helm template --validate mastodon . \
-              --values dev-values.yaml
-
-      - name: helm install
-        run: |
-          helm install mastodon . \
-              --values dev-values.yaml \
-              --timeout 10m
-
-      # This actions provides a report about the state of the k8s cluster,
-      # providing logs etc on anything that has failed and workloads marked as
-      # important.
-      #
-      # ref: https://github.com/jupyterhub/action-k8s-namespace-report#readme
-      #
-      - name: Kubernetes namespace report
-        uses: jupyterhub/action-k8s-namespace-report@v1
-        if: always()
-        with:
-          important-workloads: >-
-            deploy/mastodon-sidekiq
-            deploy/mastodon-streaming
-            deploy/mastodon-web
-            job/mastodon-assets-precompile
-            job/mastodon-chewy-upgrade
-            job/mastodon-create-admin
-            job/mastodon-db-migrate

.gitignore

@@ -44,9 +44,6 @@
 /redis
 /elasticsearch
 
-# ignore Helm charts
-/chart/*.tgz
-
 # ignore Helm dependency charts
 /chart/charts/*.tgz
 

.rubocop.yml

@@ -67,7 +67,7 @@ Lint/UselessAccessModifier:
     - class_methods
 
 Metrics/AbcSize:
-  Max: 115
+  Max: 100
   Exclude:
     - 'lib/mastodon/*_cli.rb'
 
@@ -84,7 +84,7 @@ Metrics/BlockNesting:
 
 Metrics/ClassLength:
   CountComments: false
-  Max: 500
+  Max: 400
   Exclude:
     - 'lib/mastodon/*_cli.rb'
 
@@ -281,9 +281,6 @@ Style/RedundantRegexpEscape:
 Style/RedundantReturn:
   Enabled: true
 
-Style/RedundantBegin:
-  Enabled: false
-
 Style/RegexpLiteral:
   Enabled: false
 

.ruby-gemset

@@ -1 +0,0 @@
-mastodon

.sass-lint.yml

@@ -0,0 +1,37 @@
+# Linter Documentation:
+# https://github.com/sasstools/sass-lint/tree/v1.13.1/docs/options
+
+files:
+  include: app/javascript/styles/**/*.scss
+  ignore:
+    - app/javascript/styles/mastodon/reset.scss
+
+rules:
+  # Disallows
+  no-color-literals: 0
+  no-css-comments: 0
+  no-duplicate-properties: 0
+  no-ids: 0
+  no-important: 0
+  no-mergeable-selectors: 0
+  no-misspelled-properties: 0
+  no-qualifying-elements: 0
+  no-transition-all: 0
+  no-vendor-prefixes: 0
+
+  # Nesting
+  force-element-nesting: 0
+  force-attribute-nesting: 0
+  force-pseudo-nesting: 0
+
+  # Name Formats
+  class-name-format: 0
+  leading-zero: 0
+
+  # Style Guide
+  attribute-quotes: 0
+  hex-length: 0
+  indentation: 0
+  nesting-depth: 0
+  property-sort-order: 0
+  quotes: 0