2020-07-23 20:49:17 +02:00
|
|
|
# Kernel (BIOS)
|
|
|
|
|
[BIOS Overview](kernelbios.md#bios-overview)<br/>
|
|
|
|
|
[BIOS Memory Map](kernelbios.md#bios-memory-map)<br/>
|
|
|
|
|
[BIOS Function Summary](kernelbios.md#bios-function-summary)<br/>
|
|
|
|
|
[BIOS File Functions](kernelbios.md#bios-file-functions)<br/>
|
|
|
|
|
[BIOS File Execute and Flush Cache](kernelbios.md#bios-file-execute-and-flush-cache)<br/>
|
|
|
|
|
[BIOS CDROM Functions](kernelbios.md#bios-cdrom-functions)<br/>
|
|
|
|
|
[BIOS Memory Card Functions](kernelbios.md#bios-memory-card-functions)<br/>
|
|
|
|
|
[BIOS Interrupt/Exception Handling](kernelbios.md#bios-interruptexception-handling)<br/>
|
|
|
|
|
[BIOS Event Functions](kernelbios.md#bios-event-functions)<br/>
|
|
|
|
|
[BIOS Event Summary](kernelbios.md#bios-event-summary)<br/>
|
|
|
|
|
[BIOS Thread Functions](kernelbios.md#bios-thread-functions)<br/>
|
|
|
|
|
[BIOS Timer Functions](kernelbios.md#bios-timer-functions)<br/>
|
|
|
|
|
[BIOS Joypad Functions](kernelbios.md#bios-joypad-functions)<br/>
|
|
|
|
|
[BIOS GPU Functions](kernelbios.md#bios-gpu-functions)<br/>
|
|
|
|
|
[BIOS Memory Allocation](kernelbios.md#bios-memory-allocation)<br/>
|
|
|
|
|
[BIOS Memory Fill/Copy/Compare (SLOW)](kernelbios.md#bios-memory-fillcopycompare-slow)<br/>
|
|
|
|
|
[BIOS String Functions](kernelbios.md#bios-string-functions)<br/>
|
|
|
|
|
[BIOS Number/String/Character Conversion](kernelbios.md#bios-numberstringcharacter-conversion)<br/>
|
|
|
|
|
[BIOS Misc Functions](kernelbios.md#bios-misc-functions)<br/>
|
|
|
|
|
[BIOS Internal Boot Functions](kernelbios.md#bios-internal-boot-functions)<br/>
|
|
|
|
|
[BIOS More Internal Functions](kernelbios.md#bios-more-internal-functions)<br/>
|
|
|
|
|
[BIOS PC File Server](kernelbios.md#bios-pc-file-server)<br/>
|
|
|
|
|
[BIOS TTY Console (std_io)](kernelbios.md#bios-tty-console-stdio)<br/>
|
|
|
|
|
[BIOS Character Sets](kernelbios.md#bios-character-sets)<br/>
|
|
|
|
|
[BIOS Control Blocks](kernelbios.md#bios-control-blocks)<br/>
|
|
|
|
|
[BIOS Versions](kernelbios.md#bios-versions)<br/>
|
|
|
|
|
[BIOS Patches](kernelbios.md#bios-patches)<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Overview
|
|
|
|
|
#### BIOS CDROM Boot
|
|
|
|
|
The main purpose of the BIOS is to boot games from CDROM, unfortunately, before
|
|
|
|
|
doing that, it displays the Sony intro. It's also doing some copy protection
|
|
|
|
|
and region checks, and refuses to boot unlicensed games, or illegal copies, or
|
|
|
|
|
games for other regions.<br/>
|
|
|
|
|
|
|
|
|
|
#### BIOS Bootmenu
|
|
|
|
|
The bootmenu shows up when starting the Playstation without CDROM inserted. The
|
|
|
|
|
menu allows to play Audio CDs, and to erase or copy game positions on Memory
|
|
|
|
|
Cards.<br/>
|
|
|
|
|
|
|
|
|
|
#### BIOS Functions
|
|
|
|
|
The BIOS contains a number of more or less useful, and probably more or less
|
|
|
|
|
inefficient functions that can be used by software.<br/>
|
|
|
|
|
No idea if it's easy to take full control of the CPU, ie. to do all hardware
|
|
|
|
|
access and interrupt handling by software, without using the BIOS at all?<br/>
|
|
|
|
|
Eventually the BIOS functions for accessing the CDROM drive are important, not
|
|
|
|
|
sure how complicated/compatible it'd be to access the CDROM drive directly via
|
|
|
|
|
I/O ports... among others, there might be different drives used in different
|
|
|
|
|
versions of the Playstation, which aren't fully compatible with each other?<br/>
|
|
|
|
|
|
|
|
|
|
#### BIOS Memory
|
|
|
|
|
The BIOS occupies 512Kbyte ROM with 8bit address bus (so the BIOS ROM is rather
|
|
|
|
|
slow, for faster execution, portions of it are relocated to the first 64K of
|
|
|
|
|
RAM). For some very strange reason, the original PSX BIOS executes all ROM
|
|
|
|
|
functions in uncached ROM, which is incredible slow (nocash BIOS uses cached
|
|
|
|
|
ROM, which does work without problems).<br/>
|
|
|
|
|
The first 64Kbyte of the 2Mbyte Main RAM are reserved for the BIOS (containing
|
|
|
|
|
exception handlers, jump tables, other data, and relocated code). That reserved
|
|
|
|
|
region does unfortunately include the "valuable" first 32Kbytes (valuable
|
|
|
|
|
because that memory could be accessed directly via [R0+immediate], without
|
|
|
|
|
needing to use R1..R31 as base register).<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Memory Map
|
|
|
|
|
#### BIOS ROM Map (512Kbytes)
|
|
|
|
|
```
|
|
|
|
|
BFC00000h Kernel Part 1 (code/data executed in uncached ROM)
|
|
|
|
|
BFC10000h Kernel Part 2 (code/data relocated to cached RAM)
|
|
|
|
|
BFC18000h Intro/Bootmenu (code/data decompressed and relocated to RAM)
|
|
|
|
|
BFC64000h Character Sets
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### BIOS ROM Header/Footer
|
|
|
|
|
```
|
|
|
|
|
BFC00100h Kernel BCD date (YYYYMMDDh)
|
|
|
|
|
BFC00104h Console Type (see Port 1F802030h, Secondary IRQ10 Controller)
|
|
|
|
|
BFC00108h Kernel Maker/Version Strings (separated by one or more 00h bytes)
|
|
|
|
|
BFC7FF32h GUI Version/Copyright Strings (if any) (separated by one 00h byte)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### BIOS RAM Map (1st 64Kbytes of RAM) (fixed addresses mainly in 1st 500h bytes)
|
|
|
|
|
```
|
|
|
|
|
00000000h 10h Garbage Area (see notes below)
|
|
|
|
|
00000010h 30h Unused/reserved
|
|
|
|
|
00000040h 20h COP0 debug-break vector (not used by Kernel) (in KSEG0)
|
|
|
|
|
00000060h 4 RAM Size (in megabytes) (2 or 8)
|
|
|
|
|
00000064h 4 Unknown (set to 00000000h)
|
|
|
|
|
00000068h 4 Unknown (set to 000000FFh)
|
|
|
|
|
0000006Ch 14h Unused/reserved
|
|
|
|
|
00000080h 10h Exception vector (actually in KSEG0, ie. at 80000080h)
|
|
|
|
|
00000090h 10h Unused/reserved
|
|
|
|
|
000000A0h 10h A(nnh) Function Vector
|
|
|
|
|
000000B0h 10h B(nnh) Function Vector
|
|
|
|
|
000000C0h 10h C(nnh) Function Vector
|
|
|
|
|
000000D0h 30h Unused/reserved
|
|
|
|
|
00000100h 58h Table of Tables (BIOS Control Blocks) (see below)
|
|
|
|
|
00000158h 28h Unused/reserved
|
|
|
|
|
00000180h 80h Command line argument from SYSTEM.CNF; BOOT = fname argument
|
|
|
|
|
00000200h 300h A(nnh) Jump Table
|
|
|
|
|
00000500h ... Kernel Code/Data (relocated from ROM)
|
|
|
|
|
0000Cxxxh ... Unused/reserved
|
|
|
|
|
0000DF80h 80h Used for BIOS Patches (ie. used by games, not used by BIOS)
|
|
|
|
|
0000DFFCh 4 Response value from Intro/Bootmenu
|
|
|
|
|
0000E000h 2000h Kernel Memory; ExCBs, EvCBs, and TCBs allocated via B(00h)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### User Memory (not used by Kernel)
|
|
|
|
|
```
|
|
|
|
|
00010000h ... Begin of User RAM (Exefile, Data, Heap, Stack, etc.)
|
|
|
|
|
001FFF00h ... Default Stacktop (usually in KSEG0)
|
|
|
|
|
1F800000h 400h Scratchpad (Data-Cache mis-used as Fast RAM)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Table of Tables (see BIOS Control Blocks for details)
|
|
|
|
|
Each table entry consists of two 32bit values; containing the base address, and
|
|
|
|
|
total size (in bytes) of the corresponding control blocks.<br/>
|
|
|
|
|
```
|
|
|
|
|
00000100h ExCB Exception Chain Entrypoints (addr=var, size=4*08h)
|
|
|
|
|
00000108h PCB Process Control Block (addr=var, size=1*04h)
|
|
|
|
|
00000110h TCB Thread Control Blocks (addr=var, size=N*C0h)
|
|
|
|
|
00000118h - Unused/reserved
|
|
|
|
|
00000120h EvCB Event Control Blocks (addr=var, size=N*1Ch)
|
|
|
|
|
00000128h - Unused/reserved
|
|
|
|
|
00000130h - Unused/reserved
|
|
|
|
|
00000138h - Unused/reserved
|
|
|
|
|
00000140h FCB File Control Blocks (addr=fixed, size=10h*2Ch)
|
|
|
|
|
00000148h - Unused/reserved
|
|
|
|
|
00000150h DCB Device Control Blocks (addr=fixed, size=0Ah*50h)
|
|
|
|
|
```
|
2020-07-23 22:41:06 +02:00
|
|
|
File handles (fd=00h..0Fh) can be simply converted as fcb=[140h]+fd\*2Ch.<br/>
|
|
|
|
|
Event handles (event=F10000xxh) as evcb=[120h]+(event AND FFFFh)\*1Ch.<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
|
|
|
|
|
#### Garbage Area at Address 00000000h
|
|
|
|
|
The first some bytes of memory address 00000000h aren't actually used by the
|
|
|
|
|
Kernel, except for storing some garbage at that locations. However, this
|
|
|
|
|
garbage is actually important for bugged games like R-Types and Fade to Black
|
|
|
|
|
(ie. games that do read from address 00000000h due to using uninitialized
|
|
|
|
|
pointers).<br/>
|
|
|
|
|
Initially, the garbage area is containing a copy of the 16-byte exception
|
|
|
|
|
handler at address 80h, but the first 4-bytes are typically smashed (set to
|
|
|
|
|
00000003h from some useless dummy writes in some useless CDROM delays). Ie. the
|
|
|
|
|
16-bytes should have these values:<br/>
|
|
|
|
|
```
|
|
|
|
|
[00000000h]=3C1A0000h ;<-- but overwritten by 00000003h after soon
|
|
|
|
|
[00000004h]=275A0C80h ;<-- or 275A0C50h (in older BIOS)
|
|
|
|
|
[00000008h]=03400008h
|
|
|
|
|
[0000000Ch]=00000000h
|
|
|
|
|
```
|
|
|
|
|
For R-Types, the halfword at [0] must non-zero (else the game will do a DMA to
|
|
|
|
|
address 0, and thereby destroy kernel memory). Fade to Black does several
|
|
|
|
|
garbage reads from [0..9], a wrong byte value at [5] can cause the game to
|
|
|
|
|
crash with an invalid memory access exception upon memory card access.<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Function Summary
|
|
|
|
|
#### Parameters, Registers, Stack
|
|
|
|
|
Argument(s) are passed in R4,R5,R6,R7,[SP+10h],[SP+14h],etc.<br/>
|
|
|
|
|
Caution: When calling a sub-function with N parameters, the caller MUST always
|
|
|
|
|
allocate N words on the stack, and, although the first four parameters are
|
|
|
|
|
passed in registers rather than on stack, the sub-function is allowed to
|
2020-07-23 22:41:06 +02:00
|
|
|
use/destroy these words at [SP+0..N\*4-1].<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
BIOS Functions (and custom callback functions) are allowed to destroy registers
|
|
|
|
|
R1-R15, R24-R25, R31 (RA), and HI/LO. Registers R16-R23, R29 (SP), and R30 (FP)
|
|
|
|
|
must be left unchanged (if the function uses that registers, then it must
|
|
|
|
|
push/pop them). R26 (K0) is reserved for exception handler and should be
|
|
|
|
|
usually not used by other functions. R27 (K1) and R28 (GP) are left more or
|
|
|
|
|
less unused by the BIOS, so one can more or less freely use them for whatever
|
|
|
|
|
purpose.<br/>
|
|
|
|
|
The return value (if any) is stored in R2 register.<br/>
|
|
|
|
|
|
|
|
|
|
#### A-Functions (Call 00A0h with function number in R9 Register)
|
|
|
|
|
```
|
|
|
|
|
A(00h) or B(32h) FileOpen(filename,accessmode)
|
|
|
|
|
A(01h) or B(33h) FileSeek(fd,offset,seektype)
|
|
|
|
|
A(02h) or B(34h) FileRead(fd,dst,length)
|
|
|
|
|
A(03h) or B(35h) FileWrite(fd,src,length)
|
|
|
|
|
A(04h) or B(36h) FileClose(fd)
|
|
|
|
|
A(05h) or B(37h) FileIoctl(fd,cmd,arg)
|
|
|
|
|
A(06h) or B(38h) exit(exitcode)
|
|
|
|
|
A(07h) or B(39h) FileGetDeviceFlag(fd)
|
|
|
|
|
A(08h) or B(3Ah) FileGetc(fd)
|
|
|
|
|
A(09h) or B(3Bh) FilePutc(char,fd)
|
|
|
|
|
A(0Ah) todigit(char)
|
|
|
|
|
A(0Bh) atof(src) ;Does NOT work - uses (ABSENT) cop1 !!!
|
|
|
|
|
A(0Ch) strtoul(src,src_end,base)
|
|
|
|
|
A(0Dh) strtol(src,src_end,base)
|
|
|
|
|
A(0Eh) abs(val)
|
|
|
|
|
A(0Fh) labs(val)
|
|
|
|
|
A(10h) atoi(src)
|
|
|
|
|
A(11h) atol(src)
|
|
|
|
|
A(12h) atob(src,num_dst)
|
|
|
|
|
A(13h) SaveState(buf)
|
|
|
|
|
A(14h) RestoreState(buf,param)
|
|
|
|
|
A(15h) strcat(dst,src)
|
|
|
|
|
A(16h) strncat(dst,src,maxlen)
|
|
|
|
|
A(17h) strcmp(str1,str2)
|
|
|
|
|
A(18h) strncmp(str1,str2,maxlen)
|
|
|
|
|
A(19h) strcpy(dst,src)
|
|
|
|
|
A(1Ah) strncpy(dst,src,maxlen)
|
|
|
|
|
A(1Bh) strlen(src)
|
|
|
|
|
A(1Ch) index(src,char)
|
|
|
|
|
A(1Dh) rindex(src,char)
|
|
|
|
|
A(1Eh) strchr(src,char) ;exactly the same as "index"
|
|
|
|
|
A(1Fh) strrchr(src,char) ;exactly the same as "rindex"
|
|
|
|
|
A(20h) strpbrk(src,list)
|
|
|
|
|
A(21h) strspn(src,list)
|
|
|
|
|
A(22h) strcspn(src,list)
|
|
|
|
|
A(23h) strtok(src,list) ;use strtok(0,list) in further calls
|
|
|
|
|
A(24h) strstr(str,substr) - buggy
|
|
|
|
|
A(25h) toupper(char)
|
|
|
|
|
A(26h) tolower(char)
|
|
|
|
|
A(27h) bcopy(src,dst,len)
|
|
|
|
|
A(28h) bzero(dst,len)
|
|
|
|
|
A(29h) bcmp(ptr1,ptr2,len) ;Bugged
|
|
|
|
|
A(2Ah) memcpy(dst,src,len)
|
|
|
|
|
A(2Bh) memset(dst,fillbyte,len)
|
|
|
|
|
A(2Ch) memmove(dst,src,len) ;Bugged
|
|
|
|
|
A(2Dh) memcmp(src1,src2,len) ;Bugged
|
|
|
|
|
A(2Eh) memchr(src,scanbyte,len)
|
|
|
|
|
A(2Fh) rand()
|
|
|
|
|
A(30h) srand(seed)
|
|
|
|
|
A(31h) qsort(base,nel,width,callback)
|
|
|
|
|
A(32h) strtod(src,src_end) ;Does NOT work - uses (ABSENT) cop1 !!!
|
|
|
|
|
A(33h) malloc(size)
|
|
|
|
|
A(34h) free(buf)
|
|
|
|
|
A(35h) lsearch(key,base,nel,width,callback)
|
|
|
|
|
A(36h) bsearch(key,base,nel,width,callback)
|
|
|
|
|
A(37h) calloc(sizx,sizy) ;SLOW!
|
|
|
|
|
A(38h) realloc(old_buf,new_siz) ;SLOW!
|
|
|
|
|
A(39h) InitHeap(addr,size)
|
|
|
|
|
A(3Ah) SystemErrorExit(exitcode)
|
|
|
|
|
A(3Bh) or B(3Ch) std_in_getchar()
|
|
|
|
|
A(3Ch) or B(3Dh) std_out_putchar(char)
|
|
|
|
|
A(3Dh) or B(3Eh) std_in_gets(dst)
|
|
|
|
|
A(3Eh) or B(3Fh) std_out_puts(src)
|
|
|
|
|
A(3Fh) printf(txt,param1,param2,etc.)
|
|
|
|
|
A(40h) SystemErrorUnresolvedException()
|
|
|
|
|
A(41h) LoadExeHeader(filename,headerbuf)
|
|
|
|
|
A(42h) LoadExeFile(filename,headerbuf)
|
|
|
|
|
A(43h) DoExecute(headerbuf,param1,param2)
|
|
|
|
|
A(44h) FlushCache()
|
|
|
|
|
A(45h) init_a0_b0_c0_vectors
|
|
|
|
|
A(46h) GPU_dw(Xdst,Ydst,Xsiz,Ysiz,src)
|
|
|
|
|
A(47h) gpu_send_dma(Xdst,Ydst,Xsiz,Ysiz,src)
|
|
|
|
|
A(48h) SendGP1Command(gp1cmd)
|
|
|
|
|
A(49h) GPU_cw(gp0cmd) ;send GP0 command word
|
|
|
|
|
A(4Ah) GPU_cwp(src,num) ;send GP0 command word and parameter words
|
|
|
|
|
A(4Bh) send_gpu_linked_list(src)
|
|
|
|
|
A(4Ch) gpu_abort_dma()
|
|
|
|
|
A(4Dh) GetGPUStatus()
|
|
|
|
|
A(4Eh) gpu_sync()
|
|
|
|
|
A(4Fh) SystemError
|
|
|
|
|
A(50h) SystemError
|
|
|
|
|
A(51h) LoadAndExecute(filename,stackbase,stackoffset)
|
|
|
|
|
A(52h) SystemError ----OR---- "GetSysSp()" ?
|
|
|
|
|
A(53h) SystemError ;PS2: set_ioabort_handler(src)
|
|
|
|
|
A(54h) or A(71h) CdInit()
|
|
|
|
|
A(55h) or A(70h) _bu_init()
|
|
|
|
|
A(56h) or A(72h) CdRemove() ;does NOT work due to SysDeqIntRP bug
|
|
|
|
|
A(57h) return 0
|
|
|
|
|
A(58h) return 0
|
|
|
|
|
A(59h) return 0
|
|
|
|
|
A(5Ah) return 0
|
|
|
|
|
A(5Bh) dev_tty_init() ;PS2: SystemError
|
|
|
|
|
A(5Ch) dev_tty_open(fcb,and unused:"path\name",accessmode) ;PS2: SystemError
|
|
|
|
|
A(5Dh) dev_tty_in_out(fcb,cmd) ;PS2: SystemError
|
|
|
|
|
A(5Eh) dev_tty_ioctl(fcb,cmd,arg) ;PS2: SystemError
|
|
|
|
|
A(5Fh) dev_cd_open(fcb,"path\name",accessmode)
|
|
|
|
|
A(60h) dev_cd_read(fcb,dst,len)
|
|
|
|
|
A(61h) dev_cd_close(fcb)
|
|
|
|
|
A(62h) dev_cd_firstfile(fcb,"path\name",direntry)
|
|
|
|
|
A(63h) dev_cd_nextfile(fcb,direntry)
|
|
|
|
|
A(64h) dev_cd_chdir(fcb,"path")
|
|
|
|
|
A(65h) dev_card_open(fcb,"path\name",accessmode)
|
|
|
|
|
A(66h) dev_card_read(fcb,dst,len)
|
|
|
|
|
A(67h) dev_card_write(fcb,src,len)
|
|
|
|
|
A(68h) dev_card_close(fcb)
|
|
|
|
|
A(69h) dev_card_firstfile(fcb,"path\name",direntry)
|
|
|
|
|
A(6Ah) dev_card_nextfile(fcb,direntry)
|
|
|
|
|
A(6Bh) dev_card_erase(fcb,"path\name")
|
|
|
|
|
A(6Ch) dev_card_undelete(fcb,"path\name")
|
|
|
|
|
A(6Dh) dev_card_format(fcb)
|
|
|
|
|
A(6Eh) dev_card_rename(fcb1,"path\name1",fcb2,"path\name2")
|
|
|
|
|
A(6Fh) ? ;card ;[r4+18h]=00000000h ;card_clear_error(fcb) or so
|
|
|
|
|
A(70h) or A(55h) _bu_init()
|
|
|
|
|
A(71h) or A(54h) CdInit()
|
|
|
|
|
A(72h) or A(56h) CdRemove() ;does NOT work due to SysDeqIntRP bug
|
|
|
|
|
A(73h) return 0
|
|
|
|
|
A(74h) return 0
|
|
|
|
|
A(75h) return 0
|
|
|
|
|
A(76h) return 0
|
|
|
|
|
A(77h) return 0
|
|
|
|
|
A(78h) CdAsyncSeekL(src)
|
|
|
|
|
A(79h) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(7Ah) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(7Bh) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(7Ch) CdAsyncGetStatus(dst)
|
|
|
|
|
A(7Dh) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(7Eh) CdAsyncReadSector(count,dst,mode)
|
|
|
|
|
A(7Fh) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(80h) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(81h) CdAsyncSetMode(mode)
|
|
|
|
|
A(82h) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(83h) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(84h) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(85h) return 0 ;DTL-H: Unknown?, or reportedly, CdStop (?)
|
|
|
|
|
A(86h) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(87h) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(88h) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(89h) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(8Ah) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(8Bh) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(8Ch) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(8Dh) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(8Eh) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(8Fh) return 0 ;DTL-H: Unknown?
|
|
|
|
|
A(90h) CdromIoIrqFunc1()
|
|
|
|
|
A(91h) CdromDmaIrqFunc1()
|
|
|
|
|
A(92h) CdromIoIrqFunc2()
|
|
|
|
|
A(93h) CdromDmaIrqFunc2()
|
|
|
|
|
A(94h) CdromGetInt5errCode(dst1,dst2)
|
|
|
|
|
A(95h) CdInitSubFunc()
|
|
|
|
|
A(96h) AddCDROMDevice()
|
|
|
|
|
A(97h) AddMemCardDevice() ;DTL-H: SystemError
|
|
|
|
|
A(98h) AddDuartTtyDevice() ;DTL-H: AddAdconsTtyDevice ;PS2: SystemError
|
|
|
|
|
A(99h) AddDummyTtyDevice()
|
|
|
|
|
A(9Ah) SystemError ;DTL-H: AddMessageWindowDevice
|
|
|
|
|
A(9Bh) SystemError ;DTL-H: AddCdromSimDevice
|
|
|
|
|
A(9Ch) SetConf(num_EvCB,num_TCB,stacktop)
|
|
|
|
|
A(9Dh) GetConf(num_EvCB_dst,num_TCB_dst,stacktop_dst)
|
|
|
|
|
A(9Eh) SetCdromIrqAutoAbort(type,flag)
|
|
|
|
|
A(9Fh) SetMemSize(megabytes)
|
|
|
|
|
```
|
|
|
|
|
Below functions A(A0h..B4h) not supported on pre-retail DTL-H2000 devboard:<br/>
|
|
|
|
|
```
|
|
|
|
|
A(A0h) WarmBoot()
|
|
|
|
|
A(A1h) SystemErrorBootOrDiskFailure(type,errorcode)
|
|
|
|
|
A(A2h) EnqueueCdIntr() ;with prio=0 (fixed)
|
|
|
|
|
A(A3h) DequeueCdIntr() ;does NOT work due to SysDeqIntRP bug
|
|
|
|
|
A(A4h) CdGetLbn(filename) ;get 1st sector number (or garbage when not found)
|
|
|
|
|
A(A5h) CdReadSector(count,sector,buffer)
|
|
|
|
|
A(A6h) CdGetStatus()
|
|
|
|
|
A(A7h) bu_callback_okay()
|
|
|
|
|
A(A8h) bu_callback_err_write()
|
|
|
|
|
A(A9h) bu_callback_err_busy()
|
|
|
|
|
A(AAh) bu_callback_err_eject()
|
|
|
|
|
A(ABh) _card_info(port)
|
|
|
|
|
A(ACh) _card_async_load_directory(port)
|
|
|
|
|
A(ADh) set_card_auto_format(flag)
|
|
|
|
|
A(AEh) bu_callback_err_prev_write()
|
|
|
|
|
A(AFh) card_write_test(port) ;CEX-1000: jump_to_00000000h
|
|
|
|
|
A(B0h) return 0 ;CEX-1000: jump_to_00000000h
|
|
|
|
|
A(B1h) return 0 ;CEX-1000: jump_to_00000000h
|
|
|
|
|
A(B2h) ioabort_raw(param) ;CEX-1000: jump_to_00000000h
|
|
|
|
|
A(B3h) return 0 ;CEX-1000: jump_to_00000000h
|
|
|
|
|
A(B4h) GetSystemInfo(index) ;CEX-1000: jump_to_00000000h
|
|
|
|
|
A(B5h..BFh) N/A ;jump_to_00000000h
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### B-Functions (Call 00B0h with function number in R9 Register)
|
|
|
|
|
```
|
|
|
|
|
B(00h) alloc_kernel_memory(size)
|
|
|
|
|
B(01h) free_kernel_memory(buf)
|
|
|
|
|
B(02h) init_timer(t,reload,flags)
|
|
|
|
|
B(03h) get_timer(t)
|
|
|
|
|
B(04h) enable_timer_irq(t)
|
|
|
|
|
B(05h) disable_timer_irq(t)
|
|
|
|
|
B(06h) restart_timer(t)
|
|
|
|
|
B(07h) DeliverEvent(class, spec)
|
|
|
|
|
B(08h) OpenEvent(class,spec,mode,func)
|
|
|
|
|
B(09h) CloseEvent(event)
|
|
|
|
|
B(0Ah) WaitEvent(event)
|
|
|
|
|
B(0Bh) TestEvent(event)
|
|
|
|
|
B(0Ch) EnableEvent(event)
|
|
|
|
|
B(0Dh) DisableEvent(event)
|
|
|
|
|
B(0Eh) OpenThread(reg_PC,reg_SP_FP,reg_GP)
|
|
|
|
|
B(0Fh) CloseThread(handle)
|
|
|
|
|
B(10h) ChangeThread(handle)
|
|
|
|
|
B(11h) jump_to_00000000h
|
|
|
|
|
B(12h) InitPad(buf1,siz1,buf2,siz2)
|
|
|
|
|
B(13h) StartPad()
|
|
|
|
|
B(14h) StopPad()
|
|
|
|
|
B(15h) OutdatedPadInitAndStart(type,button_dest,unused,unused)
|
|
|
|
|
B(16h) OutdatedPadGetButtons()
|
|
|
|
|
B(17h) ReturnFromException()
|
|
|
|
|
B(18h) SetDefaultExitFromException()
|
|
|
|
|
B(19h) SetCustomExitFromException(addr)
|
|
|
|
|
B(1Ah) SystemError ;PS2: return 0
|
|
|
|
|
B(1Bh) SystemError ;PS2: return 0
|
|
|
|
|
B(1Ch) SystemError ;PS2: return 0
|
|
|
|
|
B(1Dh) SystemError ;PS2: return 0
|
|
|
|
|
B(1Eh) SystemError ;PS2: return 0
|
|
|
|
|
B(1Fh) SystemError ;PS2: return 0
|
|
|
|
|
B(20h) UnDeliverEvent(class,spec)
|
|
|
|
|
B(21h) SystemError ;PS2: return 0
|
|
|
|
|
B(22h) SystemError ;PS2: return 0
|
|
|
|
|
B(23h) SystemError ;PS2: return 0
|
|
|
|
|
B(24h) jump_to_00000000h
|
|
|
|
|
B(25h) jump_to_00000000h
|
|
|
|
|
B(26h) jump_to_00000000h
|
|
|
|
|
B(27h) jump_to_00000000h
|
|
|
|
|
B(28h) jump_to_00000000h
|
|
|
|
|
B(29h) jump_to_00000000h
|
|
|
|
|
B(2Ah) SystemError ;PS2: return 0
|
|
|
|
|
B(2Bh) SystemError ;PS2: return 0
|
|
|
|
|
B(2Ch) jump_to_00000000h
|
|
|
|
|
B(2Dh) jump_to_00000000h
|
|
|
|
|
B(2Eh) jump_to_00000000h
|
|
|
|
|
B(2Fh) jump_to_00000000h
|
|
|
|
|
B(30h) jump_to_00000000h
|
|
|
|
|
B(31h) jump_to_00000000h
|
|
|
|
|
B(32h) or A(00h) FileOpen(filename,accessmode)
|
|
|
|
|
B(33h) or A(01h) FileSeek(fd,offset,seektype)
|
|
|
|
|
B(34h) or A(02h) FileRead(fd,dst,length)
|
|
|
|
|
B(35h) or A(03h) FileWrite(fd,src,length)
|
|
|
|
|
B(36h) or A(04h) FileClose(fd)
|
|
|
|
|
B(37h) or A(05h) FileIoctl(fd,cmd,arg)
|
|
|
|
|
B(38h) or A(06h) exit(exitcode)
|
|
|
|
|
B(39h) or A(07h) FileGetDeviceFlag(fd)
|
|
|
|
|
B(3Ah) or A(08h) FileGetc(fd)
|
|
|
|
|
B(3Bh) or A(09h) FilePutc(char,fd)
|
|
|
|
|
B(3Ch) or A(3Bh) std_in_getchar()
|
|
|
|
|
B(3Dh) or A(3Ch) std_out_putchar(char)
|
|
|
|
|
B(3Eh) or A(3Dh) std_in_gets(dst)
|
|
|
|
|
B(3Fh) or A(3Eh) std_out_puts(src)
|
|
|
|
|
B(40h) chdir(name)
|
|
|
|
|
B(41h) FormatDevice(devicename)
|
|
|
|
|
B(42h) firstfile(filename,direntry)
|
|
|
|
|
B(43h) nextfile(direntry)
|
|
|
|
|
B(44h) FileRename(old_filename,new_filename)
|
|
|
|
|
B(45h) FileDelete(filename)
|
|
|
|
|
B(46h) FileUndelete(filename)
|
|
|
|
|
B(47h) AddDevice(device_info) ;subfunction for AddXxxDevice functions
|
|
|
|
|
B(48h) RemoveDevice(device_name_lowercase)
|
|
|
|
|
B(49h) PrintInstalledDevices()
|
|
|
|
|
```
|
|
|
|
|
Below functions B(4Ah..5Dh) not supported on pre-retail DTL-H2000 devboard:<br/>
|
|
|
|
|
```
|
|
|
|
|
B(4Ah) InitCard(pad_enable) ;uses/destroys k0/k1 !!!
|
|
|
|
|
B(4Bh) StartCard()
|
|
|
|
|
B(4Ch) StopCard()
|
|
|
|
|
B(4Dh) _card_info_subfunc(port) ;subfunction for "_card_info"
|
|
|
|
|
B(4Eh) write_card_sector(port,sector,src)
|
|
|
|
|
B(4Fh) read_card_sector(port,sector,dst)
|
|
|
|
|
B(50h) allow_new_card()
|
|
|
|
|
B(51h) Krom2RawAdd(shiftjis_code)
|
|
|
|
|
B(52h) SystemError ;PS2: return 0
|
|
|
|
|
B(53h) Krom2Offset(shiftjis_code)
|
|
|
|
|
B(54h) GetLastError()
|
|
|
|
|
B(55h) GetLastFileError(fd)
|
|
|
|
|
B(56h) GetC0Table
|
|
|
|
|
B(57h) GetB0Table
|
|
|
|
|
B(58h) get_bu_callback_port()
|
|
|
|
|
B(59h) testdevice(devicename)
|
|
|
|
|
B(5Ah) SystemError ;PS2: return 0
|
|
|
|
|
B(5Bh) ChangeClearPad(int)
|
|
|
|
|
B(5Ch) get_card_status(slot)
|
|
|
|
|
B(5Dh) wait_card_status(slot)
|
|
|
|
|
B(5Eh..FFh) N/A ;jump_to_00000000h ;CEX-1000: B(5Eh..F6h) only
|
|
|
|
|
B(100h....) N/A ;garbage ;CEX-1000: B(F7h.....) and up
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### C-Functions (Call 00C0h with function number in R9 Register)
|
|
|
|
|
```
|
|
|
|
|
C(00h) EnqueueTimerAndVblankIrqs(priority) ;used with prio=1
|
|
|
|
|
C(01h) EnqueueSyscallHandler(priority) ;used with prio=0
|
|
|
|
|
C(02h) SysEnqIntRP(priority,struc) ;bugged, use with care
|
|
|
|
|
C(03h) SysDeqIntRP(priority,struc) ;bugged, use with care
|
|
|
|
|
C(04h) get_free_EvCB_slot()
|
|
|
|
|
C(05h) get_free_TCB_slot()
|
|
|
|
|
C(06h) ExceptionHandler()
|
|
|
|
|
C(07h) InstallExceptionHandlers() ;destroys/uses k0/k1
|
|
|
|
|
C(08h) SysInitMemory(addr,size)
|
|
|
|
|
C(09h) SysInitKernelVariables()
|
|
|
|
|
C(0Ah) ChangeClearRCnt(t,flag)
|
|
|
|
|
C(0Bh) SystemError ;PS2: return 0
|
|
|
|
|
C(0Ch) InitDefInt(priority) ;used with prio=3
|
|
|
|
|
C(0Dh) SetIrqAutoAck(irq,flag)
|
|
|
|
|
C(0Eh) return 0 ;DTL-H2000: dev_sio_init
|
|
|
|
|
C(0Fh) return 0 ;DTL-H2000: dev_sio_open
|
|
|
|
|
C(10h) return 0 ;DTL-H2000: dev_sio_in_out
|
|
|
|
|
C(11h) return 0 ;DTL-H2000: dev_sio_ioctl
|
|
|
|
|
C(12h) InstallDevices(ttyflag)
|
|
|
|
|
C(13h) FlushStdInOutPut()
|
|
|
|
|
C(14h) return 0 ;DTL-H2000: SystemError
|
|
|
|
|
C(15h) tty_cdevinput(circ,char)
|
|
|
|
|
C(16h) tty_cdevscan()
|
|
|
|
|
C(17h) tty_circgetc(circ) ;uses r5 as garbage txt for ioabort
|
|
|
|
|
C(18h) tty_circputc(char,circ)
|
|
|
|
|
C(19h) ioabort(txt1,txt2)
|
|
|
|
|
C(1Ah) set_card_find_mode(mode) ;0=normal, 1=find deleted files
|
|
|
|
|
C(1Bh) KernelRedirect(ttyflag) ;PS2: ttyflag=1 causes SystemError
|
|
|
|
|
C(1Ch) AdjustA0Table()
|
|
|
|
|
C(1Dh) get_card_find_mode()
|
|
|
|
|
C(1Eh..7Fh) N/A ;jump_to_00000000h
|
|
|
|
|
C(80h.....) N/A ;mirrors to B(00h.....)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### SYS-Functions (Syscall opcode with function number in R4 aka A0 Register)
|
|
|
|
|
```
|
|
|
|
|
SYS(00h) NoFunction()
|
|
|
|
|
SYS(01h) EnterCriticalSection()
|
|
|
|
|
SYS(02h) ExitCriticalSection()
|
|
|
|
|
SYS(03h) ChangeThreadSubFunction(addr) ;syscall with r4=03h, r5=addr
|
|
|
|
|
SYS(04h..FFFFFFFFh) calls DeliverEvent(F0000010h,4000h)
|
|
|
|
|
```
|
|
|
|
|
The 20bit immediate in the "syscall imm" opcode is unused (should be zero).<br/>
|
|
|
|
|
|
|
|
|
|
#### BREAK-Functions (Break opcode with function number in opcode's immediate)
|
|
|
|
|
BRK opcodes may be used within devkits, however, the standard BIOS simply calls
|
2020-07-23 22:41:06 +02:00
|
|
|
DeliverEvent(F0000010h,1000h) and SystemError\_A\_40h upon any BRK opcodes (as
|
2020-07-23 20:49:17 +02:00
|
|
|
well as on any other unresolved exceptions).<br/>
|
|
|
|
|
```
|
|
|
|
|
BRK(1C00h) Division by zero (commonly checked/invoked by software)
|
|
|
|
|
BRK(1800h) Division overflow (-80000000h/-1, sometimes checked by software)
|
|
|
|
|
```
|
|
|
|
|
Below breaks are used in DTL-H2000 BIOS:<br/>
|
|
|
|
|
```
|
|
|
|
|
BRK(1h) Whatever lockup or so?
|
|
|
|
|
BRK(101h) PCInit() Inits the fileserver.
|
|
|
|
|
BRK(102h) PCCreat(filename, fileattributes)
|
|
|
|
|
BRK(103h) PCOpen(filename, accessmode)
|
|
|
|
|
BRK(104h) PCClose(filehandle)
|
|
|
|
|
BRK(105h) PCRead(filehandle, length, memory_destination_address)
|
|
|
|
|
BRK(106h) PCWrite(filehandle, length, memory_source_address)
|
|
|
|
|
BRK(107h) PClSeek(filehandle, file_offset, seekmode)
|
|
|
|
|
BRK(3C400h) User has typed "break" command in debug console
|
|
|
|
|
```
|
|
|
|
|
The break functions have argument(s) in A1,A2,A3 (ie. unlike normal BIOS
|
|
|
|
|
functions not in A0,A1,A2), and TWO return values (in R2, and R3). These
|
|
|
|
|
functions require a commercial/homebrew devkit... consisting of a Data Cable
|
|
|
|
|
(for accessing the PC's harddisk)... and an Expansion ROM (for handling the
|
|
|
|
|
BREAK opcodes)... or so?<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS File Functions
|
|
|
|
|
#### A(00h) or B(32h) - FileOpen(filename, accessmode) - Opens a file for IO
|
|
|
|
|
```
|
|
|
|
|
out: V0 File handle (00h..0Fh), or -1 if error.
|
|
|
|
|
```
|
|
|
|
|
Opens a file on the target device for io. Accessmode is set like this:<br/>
|
|
|
|
|
```
|
|
|
|
|
bit0 1=Read ;\These bits aren't actually used by the BIOS, however, at
|
|
|
|
|
bit1 1=Write ;/least 1 should be set; won't work when all 32bits are zero
|
|
|
|
|
bit2 1=Exit without waiting for incoming data (when TTY buffer empty)
|
|
|
|
|
bit9 0=Open Existing File, 1=Create New file (memory card only)
|
|
|
|
|
bit15 1=Asynchronous mode (memory card only; don't wait for completion)
|
|
|
|
|
bit16-31 Number of memory card blocks for a new file on the memory card
|
|
|
|
|
```
|
|
|
|
|
The PSX can have a maximum of 16 files open at any time, of which, 2 handles
|
2020-07-23 22:41:06 +02:00
|
|
|
are always reserved for std\_io, so only 14 handles are available for actual
|
2020-07-23 20:49:17 +02:00
|
|
|
files. Some functions (chdir, testdevice, FileDelete, FileUndelete,
|
|
|
|
|
FormatDevice, firstfile, FileRename) are temporarily allocating 1 filehandle
|
|
|
|
|
(FileRename tries to use 2 filehandles, but, it does accidently use only 1
|
|
|
|
|
handle, too). So, for example, FileDelete would fail if more than 13 file
|
|
|
|
|
handles are opened by the game.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(01h) or B(33h) - FileSeek(fd, offset, seektype) - Move the file pointer
|
|
|
|
|
```
|
|
|
|
|
seektype 0 = from start of file (with positive offset)
|
|
|
|
|
1 = from current file pointer (with positive/negative offset)
|
|
|
|
|
2 = Bugs. Should be from end of file.
|
|
|
|
|
```
|
|
|
|
|
Moves the file pointer the number of bytes in A1, relative to the location
|
|
|
|
|
specified by A2. Movement from the eof is incorrect. Also, movement beyond the
|
|
|
|
|
end of the file is not checked.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(02h) or B(34h) - FileRead(fd, dst, length) - Read data from an open file
|
|
|
|
|
```
|
|
|
|
|
out: V0 Number of bytes actually read, -1 if failed.
|
|
|
|
|
```
|
|
|
|
|
Reads the number of bytes from the specified open file. If length is not
|
|
|
|
|
specified an error is returned. Read per $0080 bytes from memory card (bu:) and
|
|
|
|
|
per $0800 from cdrom (cdrom:).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(03h) or B(35h) - FileWrite(fd, src, length) - Write data to an open file
|
|
|
|
|
```
|
|
|
|
|
out: V0 Number of bytes written.
|
|
|
|
|
```
|
|
|
|
|
Writes the number of bytes to the specified open file. Write to the memory card
|
|
|
|
|
per $0080 bytes. Writing to the cdrom returns 0.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(04h) or B(36h) - FileClose(fd) - Close an open file
|
|
|
|
|
Returns r2=fd (or r2=-1 if failed).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(08h) or B(3Ah) - FileGetc(fd) - read one byte from file
|
|
|
|
|
```
|
|
|
|
|
out: R2=character (sign-expanded) or FFFFFFFFh=error
|
|
|
|
|
```
|
|
|
|
|
Internally redirects to "FileRead(fd,tempbuf,1)". For some strange reason, the
|
|
|
|
|
returned character is sign-expanded; so, a return value of FFFFFFFFh could mean
|
|
|
|
|
either character FFh, or error.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(09h) or B(3Bh) - FilePutc(char,fd) - write one byte to file
|
|
|
|
|
Observe that "fd" is the 2nd paramter (not the 1st paramter as usually).<br/>
|
|
|
|
|
```
|
|
|
|
|
out: R2=Number of bytes actually written, -1 if failed
|
|
|
|
|
```
|
|
|
|
|
Internally redirects to "FileWrite(fd,tempbuf,1)".<br/>
|
|
|
|
|
|
|
|
|
|
#### B(40h) - chdir(name) - Change the current directory on target device
|
|
|
|
|
Changes the current directory on the specified device, which should be "cdrom:"
|
|
|
|
|
(memory cards don't support directories). The PSX supports only a current
|
|
|
|
|
directory, but NOT a current device (ie. after chdir, the directory name may be
|
|
|
|
|
ommited from filenames, but the device name must be still included in all
|
|
|
|
|
filenames).<br/>
|
|
|
|
|
```
|
|
|
|
|
in: A0 Pointer to new directory path (eg. "cdrom:\path")
|
|
|
|
|
```
|
|
|
|
|
Returns 1=okay, or 0=failed.<br/>
|
|
|
|
|
The function doesn't verify if the directory exists. Caution: For cdrom, the
|
|
|
|
|
function does always load the path table from the disk (even if it was already
|
|
|
|
|
stored in RAM, so chdir is causing useless SLOW read/seek delays).<br/>
|
|
|
|
|
|
|
|
|
|
#### B(42h) - firstfile(filename,direntry) - Find first file to match the name
|
|
|
|
|
Returns r2=direntry (or r2=0 if no matching files).<br/>
|
|
|
|
|
Searches for the first file to match the specified filename; the filename may
|
2020-07-23 22:41:06 +02:00
|
|
|
contain "?" and "\*" wildcards. "\*" means to ignore ALL following characters;
|
|
|
|
|
accordingly one cannot specify any further characters after the "\*" (eg.
|
|
|
|
|
"DATA\*" would work, but "\*.DAT" won't work). "?" is meant to ignore a single
|
|
|
|
|
character cell. Note: The "?" wildcards (but not "\*") can be used also in all
|
2020-07-23 20:49:17 +02:00
|
|
|
other file functions; causing the function to use the first matching name (eg.
|
|
|
|
|
FileDelete "????" would erase the first matching file, not all matching files).<br/>
|
|
|
|
|
Start the name with the device you want to address. (ie. pcdrv:) Different
|
|
|
|
|
drives can be accessed as normally by their drive names (a:, c:, huh?) if path
|
|
|
|
|
is omitted after the device, the current directory will be used.<br/>
|
|
|
|
|
A direntry structure looks like this:<br/>
|
|
|
|
|
```
|
|
|
|
|
00h 14h Filename, terminated with 00h
|
|
|
|
|
14h 4 File attribute (always 0 for cdrom) (50h=norm or A0h=del for card)
|
|
|
|
|
18h 4 File size
|
|
|
|
|
1Ch 4 Pointer to next direntry? (not used?)
|
|
|
|
|
20h 4 First Sector Number
|
|
|
|
|
24h 4 Reserved (not used)
|
|
|
|
|
```
|
|
|
|
|
BUG: If "?" matches the ending 00h byte of a name, then any further characters
|
|
|
|
|
in the search expression are ignored (eg. "FILE?.DAT" would match to
|
|
|
|
|
"FILE2.DAT", but accidently also to "FILE").<br/>
|
|
|
|
|
BUG: For CDROM, the BIOS includes some code that is intended to realize disk
|
|
|
|
|
changes during firstfile/nextfile operations, however, that code is so bugged
|
|
|
|
|
that it does rather ensure that the BIOS does NOT realize new disks being
|
|
|
|
|
inserted during firstfile/nextfile.<br/>
|
|
|
|
|
BUG: firstfile/nextfile is internally using a FCB. On the first call to
|
|
|
|
|
firstfile, the BIOS is searching a free FCB, and does apply that as "search
|
|
|
|
|
fcb", but it doesn't mark that FCB as allocated, so other file functions may
|
|
|
|
|
accidently use the same FCB. Moreover, the BIOS does memorize that "search
|
|
|
|
|
fcb", and, even when starting a new search via another call to firstfile, it
|
|
|
|
|
keeps using that FCB for search (without checking if the FCB is still free). A
|
|
|
|
|
possible workaround is not to have any files opened during firstfile/nextfile
|
|
|
|
|
operations.<br/>
|
|
|
|
|
|
|
|
|
|
#### B(43h) - nextfile(direntry) - Searches for the next file to match the name
|
|
|
|
|
Returns r2=direntry (or r2=0 if no more matching files).<br/>
|
|
|
|
|
Uses the settings of a previous firstfile/nextfile command.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(44h) - FileRename(old\_filename, new\_filename)
|
2020-07-23 20:49:17 +02:00
|
|
|
Returns 1=okay, or 0=failed.<br/>
|
|
|
|
|
|
|
|
|
|
#### B(45h) - FileDelete(filename) - Delete a file on target device
|
|
|
|
|
Returns 1=okay, or 0=failed.<br/>
|
|
|
|
|
|
|
|
|
|
#### B(46h) - FileUndelete(filename)
|
|
|
|
|
Returns 1=okay, or 0=failed.<br/>
|
|
|
|
|
|
|
|
|
|
#### B(41h) - FormatDevice(devicename)
|
|
|
|
|
Erases all files on the device (ie. for formatting memory cards).<br/>
|
|
|
|
|
Returns 1=okay, or 0=failed.<br/>
|
|
|
|
|
|
|
|
|
|
#### B(54h) - GetLastError()
|
|
|
|
|
Indicates the reason of the most recent file function error (FileOpen,
|
|
|
|
|
FileSeek, FileRead, FileWrite, FileClose, GetLastFileError, FileIoctl, chdir,
|
|
|
|
|
testdevice, FileDelete, FileUndelete, FormatDevice, FileRename). Use
|
|
|
|
|
GetLastError() ONLY if an error has occured (the error code isn't reset to zero
|
|
|
|
|
by functions that are passing okay). firstfile/nextfile do NOT affect
|
|
|
|
|
GetLastError(). See below list of File Error Numbers for more info.<br/>
|
|
|
|
|
|
|
|
|
|
#### B(55h) - GetLastFileError(fd)
|
|
|
|
|
Basically same as B(54h), but allowing to specify a file handle for which error
|
|
|
|
|
information is to be received; accordingly it doesn't work for functions that
|
|
|
|
|
do use 'hidden' internal file handles (eg. FileDelete, or unsuccessful
|
|
|
|
|
FileOpen). Returns FCB[18h], or FFFFFFFFh if the handle is invalid/unused.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(05h) or B(37h) FileIoctl(fd,cmd,arg)
|
|
|
|
|
Used only for TTY.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(07h) or B(39h) FileGetDeviceFlag(fd)
|
|
|
|
|
Returns bit1 of the file's DCB flags. That bit is set only for Duart/TTY, and
|
|
|
|
|
is cleared for Dummy/TTY, Memory Card, and CDROM.<br/>
|
|
|
|
|
|
|
|
|
|
#### B(59h) - testdevice(devicename)
|
|
|
|
|
Whatever. Checks the devicename, and if it's accepted, calls a device specific
|
|
|
|
|
function. For the existing devices (cdrom,bu,tty) that specific function simply
|
|
|
|
|
returns without doing anything. Maybe other devices (like printers or modems)
|
|
|
|
|
would do something more interesting.<br/>
|
|
|
|
|
|
|
|
|
|
#### File Error Numbers for B(54h) and B(55h)
|
|
|
|
|
```
|
|
|
|
|
00h okay (though many successful functions leave old error code unchanged)
|
|
|
|
|
02h file not found
|
|
|
|
|
06h bad device port number (tty2 and up)
|
|
|
|
|
09h invalid or unused file handle
|
|
|
|
|
10h general error (physical I/O error, unformatted, disk changed for old fcb)
|
|
|
|
|
11h file already exists error (create/undelete/rename)
|
|
|
|
|
12h tried to rename a file from one device to another device
|
|
|
|
|
13h unknown device name
|
|
|
|
|
16h sector alignment error, or fpos>=filesize, unknown seektype or ioctl cmd
|
|
|
|
|
18h not enough free file handles
|
|
|
|
|
1Ch not enough free memory card blocks
|
|
|
|
|
FFFFFFFFh invalid or unused file handle passed to B(55h) function
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS File Execute and Flush Cache
|
|
|
|
|
#### A(41h) - LoadExeHeader(filename, headerbuf)
|
|
|
|
|
Loads the 800h-byte exe file header to an internal sector buffer, and does then
|
|
|
|
|
copy bytes [10h..4Bh] of that header to headerbuf[00h..3Bh].<br/>
|
|
|
|
|
|
|
|
|
|
#### A(42h) - LoadExeFile(filename, headerbuf)
|
|
|
|
|
Same as LoadExeHeader (see there for details), but additionally loads the body
|
|
|
|
|
of the executable (using the size and destination address in the file header),
|
|
|
|
|
and does call FlushCache. The exe can be then started via DoExecute (this isn't
|
|
|
|
|
done automatically by LoadExeFile). Unlike "LoadAndExecute", the
|
|
|
|
|
"LoadExeFile/DoExecute" combination allows to return the new exe file to return
|
|
|
|
|
to the old exe file (instead of restarting the boot executable).<br/>
|
|
|
|
|
BUG: Uses the unstable FlushCache function (see there for details).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(43h) - DoExecute(headerbuf, param1, param2)
|
|
|
|
|
Can be used to start a previously loaded executable. The function saves
|
|
|
|
|
R16,R28,R30,SP,RA in the reserved region of headerbuf (rather than on stack),
|
|
|
|
|
more or less slowly zerofills the memfill region specified in headerbuf, reads
|
|
|
|
|
the stack base and offset values and sets SP and FP to base+offset (or leaves
|
|
|
|
|
them unchanged if base=0), reads the GP value from headerbuf and sets GP to
|
|
|
|
|
that value. Then calls the excecutables entrypoint, with param1 and param2
|
|
|
|
|
passed in r4,r5.<br/>
|
|
|
|
|
If the executable (should) return, then R16,R28,R30,SP,RA are restored from
|
|
|
|
|
headerbuf, and the function returns with r2=1.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(51h) - LoadAndExecute(filename, stackbase, stackoffset)
|
|
|
|
|
This is a rather bizarre function. In short, it does load and execute the
|
|
|
|
|
specified file, and thereafter, it (tries to) reload and restart to boot
|
|
|
|
|
executable.<br/>
|
|
|
|
|
Part1: Takes a copy of the filename, with some adjustments: Everything up to
|
|
|
|
|
the first ":" or 00h byte is copied as is (ie. the device name, if it does
|
|
|
|
|
exist, or otherwise the whole path\filename.ext;ver), the remaining characters
|
|
|
|
|
are copied and converted to uppercase (ie. the path\filename.ext;ver part, or
|
|
|
|
|
none if the device name didn't exist), finally, checks if a ";" exists (ie. the
|
|
|
|
|
version suffix), if there's none, then it appends ";1" as default version.
|
|
|
|
|
CAUTION: The BIOS allocates ONLY 28 bytes on stack for the copy of the
|
|
|
|
|
filename, that region is followed by 4 unused bytes, so the maximum length
|
|
|
|
|
would be 32 bytes (31 characters plus EOL) (eg.
|
|
|
|
|
"device:\pathname\filename.ext;1",00h).<br/>
|
|
|
|
|
Part2: Enables IRQs via ExitCriticalSection, memorizes the stack base/offset
|
|
|
|
|
values from the previously loaded executable (which should have been the boot
|
|
|
|
|
executable, unless LoadAndExecute should have been used in nested fashion),
|
|
|
|
|
does then use LoadExeFile to load the desired file, replaces the stack
|
|
|
|
|
base/offset values in its headerbuf by the LoadAndExecute parameter values, and
|
|
|
|
|
does then execute it via DoExecute(headerbuf,1,0).<br/>
|
|
|
|
|
Part3: If the exefile returns, or if it couldn't be loaded, then the boot file
|
|
|
|
|
is (unsuccessfully) attempted to be reloaded: Enables IRQs via
|
|
|
|
|
ExitCriticalSection, loads the boot file via LoadExeFile, replaces the stack
|
|
|
|
|
base/offset values in its headerbuf by the values memorized in Part2 (which
|
|
|
|
|
\<should\> be the boot executable's values from SYSTEM.CNF, unless the
|
|
|
|
|
nesting stuff occurred), and does then execute the boot file via
|
|
|
|
|
DoExecute(headerbuf,1,0).<br/>
|
|
|
|
|
Part4: If the boot file returns, or if it couldn't be loaded, then the function
|
|
|
|
|
looks up in a "JMP $" endless loop (normally, returning from the boot exe
|
|
|
|
|
causes SystemErrorBootOrDiskFailure("B",38Ch), however, after using
|
|
|
|
|
LoadAndExecute, this functionality is replaced by the "JMP $" lockup.<br/>
|
|
|
|
|
BUG: Uses the unstable FlushCache function (see there for details).<br/>
|
|
|
|
|
BUG: Part3 accidently treats the first 4 characters of the exename as memory
|
|
|
|
|
address (causing an invalid memory address exception on address 6F726463h, for
|
|
|
|
|
"cdrom:filename.exe").<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(9Ch) - SetConf(num\_EvCB, num\_TCB, stacktop)
|
2020-07-23 20:49:17 +02:00
|
|
|
Changes the number of EvCBs and TCBs, and the stacktop. That values are usually
|
|
|
|
|
initialized from the settings in the SYSTEM.CNF file, so using this function
|
|
|
|
|
usually shouldn't ever be required.<br/>
|
|
|
|
|
The function deallocates all old ExCBs, EvCBs, TCBs (so all Exception handlers,
|
|
|
|
|
Events, and Threads (except the current one) are lost, and all other memory
|
2020-07-23 22:41:06 +02:00
|
|
|
that may have been allocated via alloc\_kernel\_memory(size) is deallocated, too.
|
2020-07-23 20:49:17 +02:00
|
|
|
It does then allocate the new control blocks, and enqueue the default handlers.
|
|
|
|
|
Despite of the changed stacktop, the current stack pointer is kept intact, and
|
|
|
|
|
the function returns to the caller.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(9Dh) - GetConf(num\_EvCB\_dst, num\_TCB\_dst, stacktop\_dst)
|
2020-07-23 20:49:17 +02:00
|
|
|
Returns the number of EvCBs, TCBs, and the initial stacktop. There's no return
|
|
|
|
|
value in the R2 register, instead, the three 32bit return values are stored at
|
|
|
|
|
the specified "dst" addresses.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(44h) - FlushCache()
|
|
|
|
|
Flushes the Code Cache, so opcodes are ensured to be loaded from RAM. This is
|
|
|
|
|
required when loading program code via DMA (ie. from CDROM) (the cache
|
|
|
|
|
controller apparently doesn't realize changes to RAM that are caused by DMA).
|
|
|
|
|
The LoadExeFile and LoadAndExecute functions are automatically calling
|
|
|
|
|
FlushCache (so FlushCache is required only when loading program code via
|
|
|
|
|
"FileRead" or via "CdReadSector").<br/>
|
|
|
|
|
FlushCache may be also required when relocating or modifying program code by
|
|
|
|
|
software (the cache controller doesn't seem to realize modifications to memory
|
|
|
|
|
mirrors, eg. patching the exception handler at 80000080h seems to be work
|
|
|
|
|
without FlushCache, but patching the same bytes at 00000080h doesn't).<br/>
|
|
|
|
|
Note: The PSX doesn't have a Data Cache (or actually, it has, but it's misused
|
|
|
|
|
as Fast RAM, mapped to a fixed memory region, and which isn't accessable by
|
|
|
|
|
DMA), so FlushCache isn't required for regions that contain data.<br/>
|
|
|
|
|
BUG: The FlushCache function contains a handful of opcodes that do use the k0
|
|
|
|
|
register without having IRQs disabled at that time, if an IRQ occurs during
|
|
|
|
|
those opcodes, then the k0 value gets destroyed by the exception handler,
|
|
|
|
|
causing FlushCache to get trapped in an endless loop.<br/>
|
|
|
|
|
One workaround would be to disable all IRQs before calling FlushCache, however,
|
|
|
|
|
the BIOS does internally call the function without IRQs disabled, that applies
|
|
|
|
|
to:<br/>
|
|
|
|
|
```
|
|
|
|
|
load_file A(42h)
|
|
|
|
|
load_exec A(51h)
|
|
|
|
|
add_device B(47h) (and all "add_xxx_device" functions)
|
|
|
|
|
init_card B(4Ah)
|
|
|
|
|
and by intro/boot code
|
|
|
|
|
```
|
2020-07-23 22:41:06 +02:00
|
|
|
for load\_file/load\_exec, IRQ2 (cdrom) and IRQ3 (dma) need to be enabled, so the
|
2020-07-23 20:49:17 +02:00
|
|
|
"disable all IRQs" workaround cannot be used for that functions, however, one
|
|
|
|
|
can/should disable as many IRQs as possible, ie. everything except IRQ2/IRQ3,
|
|
|
|
|
and all DMA interrupts except DMA3 (cdrom).<br/>
|
|
|
|
|
|
|
|
|
|
#### Executable Memory Allocation
|
|
|
|
|
LoadExeFile and LoadAndExecute are simply loading the file to the address
|
|
|
|
|
specified in the exe file header. There's absolutely no verification whether
|
|
|
|
|
that memory is (or isn't) allocated via malloc, or if it is used by the boot
|
|
|
|
|
executable, or by the kernel, or if it does contain RAM at all.<br/>
|
|
|
|
|
When using the "malloc" function combined with loading exe files, it may be
|
|
|
|
|
recommended not to pass all memory to InitHeap (ie. to keep a memory region
|
|
|
|
|
being reserved for loading executables).<br/>
|
|
|
|
|
|
|
|
|
|
#### Note
|
|
|
|
|
For more info about EXE files and their headers, see<br/>
|
|
|
|
|
[CDROM File Formats](cdromdrive.md#cdrom-file-formats)<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS CDROM Functions
|
|
|
|
|
#### General File Functions
|
|
|
|
|
CDROMs are basically accessed via normal file functions, with device name
|
|
|
|
|
"cdrom:" (which is an abbreviation for "cdrom0:", anyways, the port number is
|
|
|
|
|
ignored).<br/>
|
|
|
|
|
[BIOS File Functions](kernelbios.md#bios-file-functions)<br/>
|
|
|
|
|
[BIOS File Execute and Flush Cache](kernelbios.md#bios-file-execute-and-flush-cache)<br/>
|
|
|
|
|
Before starting the boot executable, the BIOS automatically calls CdInit(), so
|
|
|
|
|
the game doesn't need to do any initializations before using CDROM file
|
|
|
|
|
functions.<br/>
|
|
|
|
|
|
|
|
|
|
#### Absent CD-Audio Support
|
|
|
|
|
The Kernel doesn't include any functions for playing Audio tracks. Also,
|
|
|
|
|
there's no BIOS function for setting the XA-ADPCM file/channel filter values.
|
|
|
|
|
So CD Audio can be used only by directly programming the CDROM I/O ports.<br/>
|
|
|
|
|
|
|
|
|
|
#### Asynchronous CDROM Access
|
|
|
|
|
The normal File functions are always using synchroneous access for CDROM (ie.
|
|
|
|
|
the functions do wait until all data is transferred) (unlike as for memory
|
|
|
|
|
cards, accessmode.bit15 cannot be used to activate asynchronous cdrom access).<br/>
|
|
|
|
|
However, one can read files in asynchrouneous fashion via CdGetLbn,
|
|
|
|
|
CdAsyncSeekL, and CdAsyncReadSector. CDROM files are non-fragmented, so they
|
|
|
|
|
can be read simply from incrementing sector numbers.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(A4h) - CdGetLbn(filename)
|
|
|
|
|
Returns the first sector number used by the file, or -1 in case of error.<br/>
|
|
|
|
|
BUG: The function accidently returns -1 for the first file in the directory
|
|
|
|
|
(the first file should be a dummy entry for the current or parent directory or
|
|
|
|
|
so, so that bug isn't much of a problem), if the file is not found, then the
|
|
|
|
|
function accidently returns garbage (rather than -1).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(A5h) - CdReadSector(count,sector,buffer)
|
|
|
|
|
Reads \<count\> sectors, starting at \<sector\>, and writes data to
|
|
|
|
|
\<buffer\>. The read is done in mode=80h (double speed, 800h-bytes per
|
|
|
|
|
sector). The function waits until all sectors are transferred, and does then
|
|
|
|
|
return the number of sectors (ie. count), or -1 in case of error.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(A6h) - CdGetStatus()
|
|
|
|
|
Retrieves the cdrom status via CdAsyncGetStatus(dst) (see there for details;
|
|
|
|
|
especially for cautions on door-open flag). The function waits until the event
|
|
|
|
|
indicates completion, and does then return the status byte (or -1 in case of
|
|
|
|
|
error).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(78h) - CdAsyncSeekL(src)
|
|
|
|
|
Issues Setloc and SeekL commands. The parameter (src) is a pointer to a 3-byte
|
|
|
|
|
sector number (MM,SS,FF) (in BCD format).<br/>
|
|
|
|
|
The function returns 0=failed, or 1=okay. Completion is indicated by events
|
|
|
|
|
(class=F0000003h, and spec=20h, or 8000h).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(7Ch) - CdAsyncGetStatus(dst)
|
|
|
|
|
Issues a GetStat command. The parameter (dst) is a pointer to a 1-byte location
|
|
|
|
|
that receives the status response byte.<br/>
|
|
|
|
|
The function returns 0=failed, or 1=okay. Completion is indicated by events
|
|
|
|
|
(class=F0000003h, and spec=20h, or 8000h).<br/>
|
|
|
|
|
Caution: The command acknowledges the door-open flag, but doesn't automatically
|
|
|
|
|
reload the path table (which is required if a new disk is inserted); if the
|
|
|
|
|
door-open flag was set, one should call a function that does forcefully load
|
|
|
|
|
the path table (like chdir).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(7Eh) - CdAsyncReadSector(count,dst,mode)
|
|
|
|
|
Issues SetMode and ReadN (when mode.bit8=0), or ReadS (when mode.bit8=1)
|
|
|
|
|
commands. count is the number of sectors to be read, dst is the destination
|
|
|
|
|
address in RAM, mode.bit0-7 are passed as parameter to the SetMode command,
|
|
|
|
|
mode.bit8 is the ReadN/ReadS flag (as described above). The sector size (for
|
|
|
|
|
DMA) depends on the mode value: 918h-bytes (bit4=1, bit5=X), 924h-bytes
|
|
|
|
|
(bit4=0, bit5=1), or 800h-bytes (bit4,5=0).<br/>
|
|
|
|
|
Before CdAsyncReadSector, the sector number should be set via
|
|
|
|
|
CdAsyncSeekL(src).<br/>
|
|
|
|
|
The function returns 0=failed, or 1=okay. Completion is indicated by events
|
|
|
|
|
(class=F0000003h, and spec=20h, 80h, or 8000h).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(81h) - CdAsyncSetMode(mode)
|
|
|
|
|
Similar to CdAsyncReadSector (see there for details), but issues only the
|
|
|
|
|
SetMode command, without any following ReadN/ReadS command.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(94h) - CdromGetInt5errCode(dst1,dst2)
|
|
|
|
|
Returns the first two response bytes from the most recent INT5 error:
|
|
|
|
|
[dst1]=status, [dst2]=errorcode. The BIOS doesn't reset these values in case of
|
|
|
|
|
successful completion, so the values are quite useless.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(54h) or A(71h) - CdInit()
|
|
|
|
|
#### A(56h) or A(72h) - CdRemove() ;does NOT work due to SysDeqIntRP bug
|
|
|
|
|
#### A(90h) - CdromIoIrqFunc1()
|
|
|
|
|
#### A(91h) - CdromDmaIrqFunc1()
|
|
|
|
|
#### A(92h) - CdromIoIrqFunc2()
|
|
|
|
|
#### A(93h) - CdromDmaIrqFunc2()
|
|
|
|
|
#### A(95h) - CdInitSubFunc() ;subfunction for CdInit()
|
|
|
|
|
#### A(9Eh) - SetCdromIrqAutoAbort(type,flag)
|
|
|
|
|
#### A(A2h) - EnqueueCdIntr() ;with prio=0 (fixed)
|
|
|
|
|
#### A(A3h) - DequeueCdIntr() ;does NOT work due to SysDeqIntRP bug
|
|
|
|
|
Internally used CDROM functions for initialization and IRQ handling.<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Memory Card Functions
|
|
|
|
|
#### General File Functions
|
|
|
|
|
Memory Cards aka Backup Units (bu) are basically accessed via normal file
|
|
|
|
|
functions, with device names "bu00:" (Slot 1) and "bu10:" (Slot 2),<br/>
|
|
|
|
|
[BIOS File Functions](kernelbios.md#bios-file-functions)<br/>
|
|
|
|
|
Before using the file functions for memory cards, first call
|
2020-07-23 22:41:06 +02:00
|
|
|
InitCard(pad\_enable), then StartCard(), and then \_bu\_init().<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
|
|
|
|
|
#### File Header, Filesize, and Sector Alignment
|
|
|
|
|
The first 100h..200h bytes (2..4 sectors) of the file must contain the title
|
|
|
|
|
and icon bitmap(s). For details, see:<br/>
|
|
|
|
|
[Memory Card Data Format](controllersandmemorycards.md#memory-card-data-format)<br/>
|
|
|
|
|
The filesize must be a multiple of 2000h bytes (one block), the maximum size
|
|
|
|
|
would be 1E000h bytes (when using all 15 blocks on the memory card). The
|
|
|
|
|
filesize must be specified when creating the file (ie. accessmode bit9=1, and
|
|
|
|
|
bit16-31=number of blocks). Once when the file is created, the BIOS does NOT
|
|
|
|
|
allow to change the filesize (unless by deleting and re-creating the file).<br/>
|
|
|
|
|
When reading/writing files, the amount of data must be a multiple of 80h bytes
|
|
|
|
|
(one sector), and the file position must be aligned to a 80h-byte boundary,
|
|
|
|
|
too. There's no restriction on fragmented files (ie. one may cross 2000h-byte
|
|
|
|
|
block boundaries within the file).<br/>
|
|
|
|
|
|
|
|
|
|
#### Poor Memcard Performance
|
|
|
|
|
PSX memory card accesses are typically super-slow. That, not so much because
|
|
|
|
|
the hardware would be slow, but rather because of improper inefficent code at
|
|
|
|
|
the BIOS side. The original BIOS tries to synchronize memory card accesses with
|
|
|
|
|
joypad accesses simply by accessing only one sector per frame (although it
|
|
|
|
|
could access circa two sectors). To the worst, the BIOS accesses Slot 1 only on
|
|
|
|
|
each second frame, and Slot 2 only each other frame (although in 99% of all
|
|
|
|
|
cases only one slot is accessed at once, so the access time drops to 0.5
|
|
|
|
|
sectors per frame).<br/>
|
|
|
|
|
Moreover, the memory card id, directory, and broken sector list do occupy 26
|
|
|
|
|
sectors (although the whole information would fit into 4 or 5 sectors) (a
|
|
|
|
|
workaround would be to read only the first some bytes, and to skip the
|
|
|
|
|
additional unused bytes - though that'd also mean to skip the checksums which
|
|
|
|
|
are unfortunately stored at the end of the sector).<br/>
|
|
|
|
|
And, anytime when opening a file (in synchronous mode), the BIOS does
|
|
|
|
|
additionally read sector 0 (which is totally useless, and gets especially slow
|
|
|
|
|
when opening a bunch of files; eg. when extracting the title/icon from all
|
|
|
|
|
available files on the card).<br/>
|
|
|
|
|
|
|
|
|
|
#### Asynchronous Access
|
|
|
|
|
The BIOS supports synchronous and asynchronous memory card access. Synchronous
|
|
|
|
|
means that the BIOS function doesn't return until the access has completed
|
|
|
|
|
(which means, due to the poor performance, that the function spends about 75%
|
|
|
|
|
of the time on inactivity) (except in nocash PSX bios, which has better
|
|
|
|
|
performance), whilst asynchronous access means that the BIOS function returns
|
|
|
|
|
immediately after invoking the access (which does then continue on interrupt
|
|
|
|
|
level, and does return an event when finished).<br/>
|
|
|
|
|
The file "FileRead" and "FileWrite" functions act asynchronous when accessmode
|
|
|
|
|
bit15 is set when opening the file. Additionally, the A(ACh)
|
2020-07-23 22:41:06 +02:00
|
|
|
\_card\_async\_load\_directory(port) function can be used to tell the BIOS to load
|
2020-07-23 20:49:17 +02:00
|
|
|
the directory entries and broken sector list to its internal RAM buffers (eg.
|
|
|
|
|
during the games title screen, so the BIOS doesn't need to load that data once
|
|
|
|
|
when the game enters its memory card menu). All other functions like FileDelete
|
|
|
|
|
or FormatDevice always act synchronous. The FileOpen/findfirst/findnext
|
|
|
|
|
functions do normally complete immediately without accessing the card at all
|
|
|
|
|
(unless the directory wasn't yet read; in that case the directory is loading in
|
|
|
|
|
synchronous fashion).<br/>
|
|
|
|
|
Unfortunately, the asynchronous response doesn't rely on a single callback
|
|
|
|
|
event, but rather on a bunch of different events which must be all allocated
|
|
|
|
|
and tested by the game (and of which, one event is delivered on completion)
|
|
|
|
|
(which one depends on whether function completed okay, or if an error
|
|
|
|
|
occurred).<br/>
|
|
|
|
|
|
|
|
|
|
#### Multitap Support (and Multitap Problems)
|
|
|
|
|
The BIOS does have some partial support for accessing more than two memory
|
|
|
|
|
cards (via Multitap adaptors). Device/port names "bu01:", "bu02:", "bu03:"
|
|
|
|
|
allow to access extra memory carts in slot1 (and "bu11:", "bu12:", "bu13:" in
|
|
|
|
|
slot2). Namely, those names will send values 82h, 83h, 84h to the memory card
|
|
|
|
|
slot (instead of the normal 81h value).<br/>
|
2020-07-23 22:41:06 +02:00
|
|
|
However, the BIOS directory\_buffer and broken\_sector\_list do support only two
|
2020-07-23 20:49:17 +02:00
|
|
|
memory cards (one in slot1 and one in slot2). So, trying to access more memory
|
|
|
|
|
cards may cause great data corruption (though there might be a way to get the
|
|
|
|
|
BIOS to reload those buffers before accessing a different memory card).<br/>
|
|
|
|
|
Aside from that problem, the BIOS functions are very-very-very slow even when
|
|
|
|
|
accessing only two memory cards. Trying to use the BIOS to access up to eight
|
|
|
|
|
memory cards would be very-extremly-very slow, which would be more annoying
|
|
|
|
|
than useful.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(4Ah) - InitCard(pad\_enable) ;uses/destroys k0/k1 !!!
|
2020-07-23 20:49:17 +02:00
|
|
|
#### B(4Bh) - StartCard()
|
|
|
|
|
#### B(4Ch) - StopCard()
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(55h) or A(70h) - \_bu\_init()
|
2020-07-23 20:49:17 +02:00
|
|
|
|
|
|
|
|
```
|
|
|
|
|
--- Below are some lower level memory card functions ---
|
|
|
|
|
```
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(ABh) - \_card\_info(port)
|
|
|
|
|
#### B(4Dh) - \_card\_info\_subfunc(port) ;subfunction for "\_card\_info"
|
|
|
|
|
Can be used to check if the most recent call to write\_card\_sector has completed
|
2020-07-23 20:49:17 +02:00
|
|
|
okay. Issues an incomplete dummy read command (similar to B(4Fh) -
|
2020-07-23 22:41:06 +02:00
|
|
|
read\_card\_sector). The read command is aborted once when receiving the status
|
2020-07-23 20:49:17 +02:00
|
|
|
byte from the memory card (the actual data transfer is skipped).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(AFh) - card\_write\_test(port) ;not supported by old CEX-1000 version
|
2020-07-23 20:49:17 +02:00
|
|
|
Resets the card changed flag. For some strange reason, this flag isn't
|
|
|
|
|
automatically reset after reading the flag, instead, the flag is reset upon
|
|
|
|
|
sector writes. To do that, this function issues a dummy write to sector 3Fh.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(50h) - allow\_new\_card()
|
2020-07-23 20:49:17 +02:00
|
|
|
Normally any memory card read/write functions fail if the BIOS senses the card
|
|
|
|
|
change flag to be set. Calling this function tells the BIOS to ignore the card
|
|
|
|
|
change flag on the next read/write operation (the function is internally used
|
2020-07-23 22:41:06 +02:00
|
|
|
when loading the "MC" ID from sector 0, and when calling the card\_write\_test
|
2020-07-23 20:49:17 +02:00
|
|
|
function to acknowledge the card change flag).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(4Eh) - write\_card\_sector(port,sector,src)
|
|
|
|
|
#### B(4Fh) - read\_card\_sector(port,sector,dst)
|
2020-07-23 20:49:17 +02:00
|
|
|
Invokes asynchronous reading/writing of a single sector. The function returns
|
|
|
|
|
1=okay, or 0=failed (on invalid sector numbers). The actual I/O is done on IRQ
|
|
|
|
|
level, completion of the I/O command transmission can be checked, among others,
|
2020-07-23 22:41:06 +02:00
|
|
|
via get/wait\_card\_status(slot) functions (with slot=port/10h).<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
In case of the write function, completion of the \<transmission\> does NOT
|
|
|
|
|
mean that the actual \<writing\> has completed, instead, write errors are
|
|
|
|
|
indicated upon completion of the \<next sector\> read/write transmission
|
2020-07-23 22:41:06 +02:00
|
|
|
(or, if there are no further sectors to be accessed; one can use \_card\_info to
|
2020-07-23 20:49:17 +02:00
|
|
|
verify completion of the last written sector).<br/>
|
|
|
|
|
The sector number should be in range of 0..3FFh, for some strange reason,
|
|
|
|
|
probably a BUG, the function also accepts sector 400h. The specified sector
|
|
|
|
|
number is directly accessed (it is NOT parsed through the broken sector
|
|
|
|
|
replacement list).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(5Ch) - get\_card\_status(slot)
|
|
|
|
|
#### B(5Dh) - wait\_card\_status(slot)
|
2020-07-23 20:49:17 +02:00
|
|
|
Returns the status of the most recent I/O command, possible values are:<br/>
|
|
|
|
|
```
|
|
|
|
|
01h=ready
|
|
|
|
|
02h=busy/read
|
|
|
|
|
04h=busy/write
|
|
|
|
|
08h=busy/info
|
|
|
|
|
11h=failed/timeout (eg. when no cartridge inserted)
|
|
|
|
|
21h=failed/general error
|
|
|
|
|
```
|
2020-07-23 22:41:06 +02:00
|
|
|
get\_card\_status returns immediately, wait\_card\_status waits until a non-busy
|
2020-07-23 20:49:17 +02:00
|
|
|
state occurs.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(A7h) - bu\_callback\_okay()
|
|
|
|
|
#### A(A8h) - bu\_callback\_err\_write()
|
|
|
|
|
#### A(A9h) - bu\_callback\_err\_busy()
|
|
|
|
|
#### A(AAh) - bu\_callback\_err\_eject()
|
|
|
|
|
#### A(AEh) - bu\_callback\_err\_prev\_write()
|
2020-07-23 20:49:17 +02:00
|
|
|
These five callback functions are internally used by the BIOS, notifying other
|
|
|
|
|
BIOS functions about (un-)successful completion of memory card I/O commands.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(58h) - get\_bu\_callback\_port()
|
|
|
|
|
This is a subfunction for the five bu\_callback\_xxx functions (indicating
|
2020-07-23 20:49:17 +02:00
|
|
|
whether the callback occured for a slot1 or slot2 access).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(ACh) - \_card\_async\_load\_directory(port)
|
2020-07-23 20:49:17 +02:00
|
|
|
Invokes asynchronous reading of the memory card directory. The function isn't
|
|
|
|
|
too useful because the BIOS tends to read the directory automatically in
|
|
|
|
|
various places in synchronous mode, so there isn't too much chance to replace
|
|
|
|
|
the automatic synchronous reading by asynchronous reading.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(ADh) - set\_card\_auto\_format(flag)
|
|
|
|
|
Can be used to enable/disable auto format (0=off, 1=on). The \_bu\_init function
|
2020-07-23 20:49:17 +02:00
|
|
|
initializes auto format as disabled. If auto format is enabled, then the BIOS
|
|
|
|
|
does automatically format memory cards if it has failed to read the "MC" ID
|
|
|
|
|
bytes on sector 0. Although potentially useful, activating this feature is
|
|
|
|
|
rather destructive (for example, read errors on sector 0 might occur accidently
|
|
|
|
|
due to improperly inserted cards with dirty contacts, so it'd be better to
|
|
|
|
|
prompt the user whether or not to format the card, rather than doing that
|
|
|
|
|
automatically).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### C(1Ah) - set\_card\_find\_mode(mode)
|
|
|
|
|
#### C(1Dh) - get\_card\_find\_mode()
|
2020-07-23 20:49:17 +02:00
|
|
|
Allows to get/set the card find mode (0=normal, 1=find deleted files), the mode
|
|
|
|
|
setting affects only the firstfile/nextfile functions. All other file functions
|
|
|
|
|
are used fixed mode settings (always mode=0 for FileOpen, FileRename,
|
|
|
|
|
FileDelete, and mode=1 for FileUndelete).<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Interrupt/Exception Handling
|
|
|
|
|
The Playstation's Kernel uses an uncredible inefficient and unstable exception
|
|
|
|
|
handler; which may have been believed to be very powerful and flexible.<br/>
|
|
|
|
|
|
|
|
|
|
#### Inefficiency
|
|
|
|
|
For a maximum of slowness, it does always save and restore all CPU registers
|
|
|
|
|
(including such that aren't used in the exception handler). It does then go
|
|
|
|
|
through a list of installed interrupt handlers - and executes ALL of them. For
|
|
|
|
|
example, a Timer0 IRQ is first passed to the Cdrom and Vblank handlers (which
|
|
|
|
|
must reject it, no thanks), before it does eventually reach the Timer0 handler.<br/>
|
|
|
|
|
|
|
|
|
|
#### Unstable IRQ Handling
|
|
|
|
|
A fundamental mistake in the exception handler is that it doesn't memorize the
|
|
|
|
|
incoming IRQ flags. So the various interrupt handlers must check Port 1F801070h
|
|
|
|
|
one after each other. That means, if a high priority handler has rejected IRQ
|
|
|
|
|
processing (because the desired IRQ flag wasn't set at that time), then a lower
|
|
|
|
|
priority handler may process it (assuming that the IRQ flag got set in the
|
|
|
|
|
meantime), and, in worst case it may even acknowledge it (so the high priority
|
|
|
|
|
handler does never receive it).<br/>
|
|
|
|
|
To avoid such problems, there should be only ONE handler installed for each IRQ
|
|
|
|
|
source. However, that isn't always possible because the Kernel automatically
|
|
|
|
|
installs some predefined handlers. Most noteworthy, the totally bugged
|
|
|
|
|
DefaultInterruptHandlers is always installed (and cannot be removed), so it
|
|
|
|
|
does randomly trigger Events. Fortunately, it does not acknowledge the IRQs
|
|
|
|
|
(unless SetIrqAutoAck was used to enable that fatal behaviour).<br/>
|
|
|
|
|
|
|
|
|
|
#### B(18h) - SetDefaultExitFromException()
|
|
|
|
|
Applies the default "Exit" structure (which consists of a pointer to
|
|
|
|
|
ReturnFromException, and the Kernel's exception stacktop (minus 4, for whatever
|
|
|
|
|
reason), and zeroes for the R16..R23,R28,R30 registers. Returns the address of
|
|
|
|
|
that structure.<br/>
|
|
|
|
|
See SetCustomExitFromException for details.<br/>
|
|
|
|
|
|
|
|
|
|
#### B(19h) - SetCustomExitFromException(addr)
|
|
|
|
|
addr points to a structure (with same format as for the SaveState function):<br/>
|
|
|
|
|
```
|
|
|
|
|
00h 4 r31/ra,pc ;usually ptr to ReturnFromException function
|
|
|
|
|
04h 4 r28/sp ;usually exception stacktop, minus 4, for whatever reason
|
|
|
|
|
08h 4 r30/fp ;usually 0
|
|
|
|
|
0Ch 4x8 r16..r23 ;usually 0
|
|
|
|
|
2Ch 4 r28/gp ;usually 0
|
|
|
|
|
```
|
|
|
|
|
The hook function is executed only if the ExceptionHandler has been fully
|
|
|
|
|
executed (after processing an IRQ, many interrupt handlers are calling
|
|
|
|
|
ReturnFromException to abort further exception handling, and thus do skip the
|
|
|
|
|
hook function). Once when the hook function has finished, it should execute
|
|
|
|
|
ReturnFromException. The hook function is called with r2=1 (that is important
|
|
|
|
|
if the hook address was recorded with SaveState, where it "returns" to the
|
|
|
|
|
SaveState caller, with r2 as "return value").<br/>
|
|
|
|
|
|
|
|
|
|
#### Priority Chains
|
|
|
|
|
The Kernel's exception handler has four priority chains, each may contain one
|
|
|
|
|
or more Interrupt or Exception handlers. The default handlers are:<br/>
|
|
|
|
|
```
|
|
|
|
|
Prio Chain Content
|
|
|
|
|
0 CdromDmaIrq, CdromIoIrq, SyscallException
|
|
|
|
|
1 CardSpecificIrq, VblankIrq, Timer2Irq, Timer1Irq, Timer0Irq
|
|
|
|
|
2 PadCardIrq
|
|
|
|
|
3 DefInt
|
|
|
|
|
```
|
|
|
|
|
The exception handler calls all handlers, starting with the first element in
|
|
|
|
|
the priority 0 chain (ie. usually CdromDmaIrq). The separate handlers must
|
|
|
|
|
check if they want to process the IRQ (eg. CdromDmaIrq would process only CDROM
|
|
|
|
|
DMA IRQs, but not joypad IRQs or so). If it has processed and acknowledged the
|
|
|
|
|
IRQ, then the handler may execute ReturnFromException, which causes the
|
|
|
|
|
handlers of lower priority to be skipped (if there are still other
|
|
|
|
|
unacknowledge IRQs pending, then the hardware will re-enter the exception
|
|
|
|
|
handler as soon as the RFE opcode in ReturnFromException does re-enable
|
|
|
|
|
interrupts).<br/>
|
|
|
|
|
|
|
|
|
|
#### C(02h) - SysEnqIntRP(priority,struc) ;bugged, use with care
|
|
|
|
|
Inserts a new element in the specified priority chain. The new element is
|
|
|
|
|
inserted at the begin of the chain, so (within that priority chain) the new
|
|
|
|
|
element has highest priority.<br/>
|
|
|
|
|
```
|
|
|
|
|
00h 4 pointer to next element (0=none) ;this pointer is inserted by BIOS
|
|
|
|
|
04h 4 pointer to SECOND function (0=none) ;executed if func1 returns r2<>0
|
|
|
|
|
08h 4 pointer to FIRST function (0=none) ;executed first
|
|
|
|
|
0Ch 4 Not used (usually zero)
|
|
|
|
|
```
|
|
|
|
|
BUG: SysDeqIntRP can remove only the first element in the chain (see there for
|
|
|
|
|
details), so adding new chain elements may cause OTHER functions to be unable
|
|
|
|
|
to remove their chain elements. The BIOS seems to be occassionally
|
|
|
|
|
adding/removing the "CardSpecificIrq" and "PadCardIrq" (with priority 1 and 2),
|
|
|
|
|
so using that priorities may cause the BIOS to be unable to remove that IRQ
|
|
|
|
|
handlers. Using priority 0 and 3 should work (as long as the software takes
|
|
|
|
|
care to remove only the newest elements) (but there should be no conflicts with
|
|
|
|
|
the BIOS which does never remove priority 0 and 3 elements) (leaving apart that
|
|
|
|
|
DequeueCdIntr and CdRemove try to remove priority 0 elements, but that
|
|
|
|
|
functions won't work anyways; due to the same bug).<br/>
|
|
|
|
|
|
|
|
|
|
#### C(03h) - SysDeqIntRP(priority,struc) ;bugged, use with care
|
|
|
|
|
Removes the specified element from the specified priority chain.<br/>
|
|
|
|
|
BUG: The function tries to search the whole chain (and to remove the element if
|
|
|
|
|
it finds it). However, it does only check the first element properly, and,
|
|
|
|
|
thereafter it reads a garbage value from an uninitialized stack location, and
|
|
|
|
|
acts more or less unpredictable. So, it can remove only the first element in
|
|
|
|
|
the chain, ie. it should be called only if you are SURE that there's no newer
|
|
|
|
|
element in the chain, and only if you are SURE that the element IS in the
|
|
|
|
|
chain.<br/>
|
|
|
|
|
|
|
|
|
|
#### SYS(01h) - EnterCriticalSection() ;syscall with r4=01h
|
|
|
|
|
Disables interrupts by clearing SR (cop0r12) Bit 2 and 10 (of which, Bit2 gets
|
|
|
|
|
copied to Bit0 once when returning from the syscall exception). Returns 1 if
|
|
|
|
|
both bits were set, returns 0 if one or both of the bits were already zero.<br/>
|
|
|
|
|
|
|
|
|
|
#### SYS(02h) - ExitCriticalSection() ;syscall with r4=02h
|
|
|
|
|
Enables interrupts by set SR (cop0r12) Bit 2 and 10 (of which, Bit2 gets copied
|
|
|
|
|
to Bit0 once when returning from the syscall exception). There's no return
|
|
|
|
|
value (all registers except SR and K0 are unchanged).<br/>
|
|
|
|
|
|
|
|
|
|
#### C(0Dh) - SetIrqAutoAck(irq,flag)
|
|
|
|
|
Specifies if the DefaultInterruptHandler shall automatically acknowledge IRQs.
|
|
|
|
|
The "irq" paramter is the number of the interrupt, ie. 00h..0Ah = IRQ0..IRQ10.
|
|
|
|
|
The "flag" value should be 0 to disable AutoAck, or non-zero to enable AutoAck.
|
|
|
|
|
By default, AutoAck is disabled for all IRQs.<br/>
|
|
|
|
|
Mind that the DefaultInterruptHandler is totally bugged. Especially the AutoAck
|
|
|
|
|
feature doesn't work very well: It may cause higher priority handlers to miss
|
|
|
|
|
their IRQ, and it may even cause the DefaultInterruptHandler to miss its own
|
|
|
|
|
IRQs.<br/>
|
|
|
|
|
|
|
|
|
|
#### C(06h) - ExceptionHandler()
|
|
|
|
|
The C(06h) vector points to the exception handler, ie. to the function that is
|
|
|
|
|
invoked from the 4 opcodes at address 80000080h, that opcodes jump directly to
|
|
|
|
|
the exception handler, so patching the C(06h) vector has no effect.<br/>
|
|
|
|
|
Reading the C(06h) entry can be used to let a custom 80000080h handler pass
|
|
|
|
|
control back to the default handler (that, by a "direct" jump, not by the usual
|
|
|
|
|
"MOV R9,06h / CALL 0C0h" method, which would destroy main programs R9
|
|
|
|
|
register).<br/>
|
|
|
|
|
Also, reading C(06h) may be useful for patching the exception handler (which
|
|
|
|
|
contains a bunch of NOP opcodes, which seem to be intended to insert additional
|
|
|
|
|
opcodes, such like debugger exception handling) (Note: some of that NOPs are
|
|
|
|
|
reserved for Memory Card IRQ handling).<br/>
|
|
|
|
|
BUG: Early BIOS versions did try to examine a copy of cop0r13 in r2 register,
|
|
|
|
|
but did forgot cop0r13 to r2 (so they examined garbage), this was fixed in
|
|
|
|
|
newer BIOS versions, additionally, most commercial games still include patches
|
|
|
|
|
for compatibility with the old BIOS.<br/>
|
|
|
|
|
|
|
|
|
|
#### B(17h) - ReturnFromException()
|
|
|
|
|
Restores the CPU registers (R1-R31,HI,LO,SR,PC) (except R26/K0) from the
|
|
|
|
|
current TCB. This function is usually executed automatically at the end of the
|
|
|
|
|
ExceptionHandler, however, functions in the exception chain may call
|
|
|
|
|
ReturnFromException to return immediately, without processing chain elements of
|
|
|
|
|
lower priority.<br/>
|
|
|
|
|
|
|
|
|
|
#### C(00h) - EnqueueTimerAndVblankIrqs(priority) ;used with prio=1
|
|
|
|
|
#### C(01h) - EnqueueSyscallHandler(priority) ;used with prio=0
|
|
|
|
|
#### C(0Ch) - InitDefInt(priority) ;used with prio=3
|
|
|
|
|
Internally used to add some default IRQ and Exception handlers.<br/>
|
|
|
|
|
|
|
|
|
|
#### No Nested Exceptions
|
|
|
|
|
The Kernel doesn't support nested exceptions, that would require a decreasing
|
|
|
|
|
exception stack, however, the kernel saves the incoming CPU registers in the
|
|
|
|
|
current TCB, and an exception stack with fixed start address for internal
|
|
|
|
|
push/pop during exception handling. So, nesting would overwrite these values.
|
|
|
|
|
Do not enable IRQs, and don't trap other exceptions (like break or syscall
|
|
|
|
|
opcodes, or memory or overlow errors) during exception handling.<br/>
|
|
|
|
|
Note: The execption stack has a fixed size of 1000h bytes (and is located
|
|
|
|
|
somewhere in the first 64Kbytes of memory).<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Event Functions
|
|
|
|
|
#### B(08h) - OpenEvent(class, spec, mode, func)
|
|
|
|
|
Adds an event structure to the event table.<br/>
|
|
|
|
|
```
|
|
|
|
|
class,spec - triggers if BOTH values match
|
|
|
|
|
mode - (1000h=execute function/stay busy, 2000h=no func/mark ready)
|
|
|
|
|
func - Address of callback function (0=None) (used only when mode=1000h)
|
|
|
|
|
out: R2 = Event descriptor (F1000000h and up), or FFFFFFFFh if failed
|
|
|
|
|
```
|
|
|
|
|
Opens an event, should be called within a critical section. The return value is
|
|
|
|
|
used to identify the event to the other event functions. A list of event
|
|
|
|
|
classes, specs and modes is at the end of this section. Initially, the event is
|
|
|
|
|
disabled.<br/>
|
|
|
|
|
Note: The desired max number of events can be specified in the SYSTEM.CNF boot
|
|
|
|
|
file (the default is "EVENT = 10" (which is a HEX number, ie. 16 decimal; of
|
|
|
|
|
which 5 events are internally used by the BIOS for CDROM functions, so, of the
|
|
|
|
|
16 events, only 11 events are available to the game). A bigger amount of events
|
|
|
|
|
will slowdown the DeliverEvent function (which always scans all EvCBs, even if
|
|
|
|
|
all events are disabled).<br/>
|
|
|
|
|
|
|
|
|
|
#### B(09h) - CloseEvent(event) - releases event from the event table
|
|
|
|
|
Always returns 1 (even if the event handle is unused or invalid).<br/>
|
|
|
|
|
|
|
|
|
|
#### B(0Ch) - EnableEvent(event) - Turns on event handling for specified event
|
|
|
|
|
Always returns 1 (even if the event handle is unused or invalid).<br/>
|
|
|
|
|
|
|
|
|
|
#### B(0Dh) - DisableEvent(event) - Turns off event handling for specified event
|
|
|
|
|
Always returns 1 (even if the event handle is unused or invalid).<br/>
|
|
|
|
|
|
|
|
|
|
#### B(0Ah) WaitEvent(event)
|
|
|
|
|
Returns 0 if the event is disabled. Otherwise hangs in a loop until the event
|
|
|
|
|
becomes ready, and returns 1 once when it is ready (and automatically switches
|
|
|
|
|
the event back to busy status). Callback events (mode=1000h) do never set the
|
|
|
|
|
ready flag (and thus WaitEvent would hang forever).<br/>
|
|
|
|
|
The main program simply hangs during the wait, so when using multiple threads,
|
|
|
|
|
it may be more recommended to create an own waitloop that checks TestEvent, and
|
|
|
|
|
to call ChangeThread when the event is busy.<br/>
|
|
|
|
|
BUG: The return value is unstable (sometimes accidently returns 0=disabled if
|
|
|
|
|
the event status changes from not-ready to ready shortly after the function
|
|
|
|
|
call).<br/>
|
|
|
|
|
|
|
|
|
|
#### B(0Bh) TestEvent(event)
|
|
|
|
|
Returns 0 if the event is busy or disabled. Otherwise, when it is ready,
|
|
|
|
|
returns 1 (and automatically switches the event back to busy status). Callback
|
|
|
|
|
events (mode=1000h) do never set the ready flag.<br/>
|
|
|
|
|
|
|
|
|
|
#### B(07h) DeliverEvent(class, spec)
|
|
|
|
|
This function is usually called by the kernel, it triggers all events that are
|
|
|
|
|
enabled/busy, and that have the specified class and spec values. Depending on
|
|
|
|
|
the mode, either the callback function is called (mode=1000h), or the event is
|
|
|
|
|
marked as enabled/ready (mode=2000h).<br/>
|
|
|
|
|
|
|
|
|
|
#### B(20h) UnDeliverEvent(class, spec)
|
|
|
|
|
This function is usually called by the kernel, undelivers all events that are
|
|
|
|
|
enabled/ready, and that have mode=2000h, and that have the specified class and
|
|
|
|
|
spec values. Undeliver means that the events are marked as enabled/busy.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### C(04h) get\_free\_EvCB\_slot()
|
2020-07-23 20:49:17 +02:00
|
|
|
A subfunction for OpenEvent.<br/>
|
|
|
|
|
|
|
|
|
|
#### Event Classes
|
|
|
|
|
File Events:<br/>
|
|
|
|
|
```
|
|
|
|
|
0000000xh memory card (for file handle fd=x)
|
|
|
|
|
```
|
|
|
|
|
Hardware Events:<br/>
|
|
|
|
|
```
|
|
|
|
|
F0000001h IRQ0 VBLANK
|
|
|
|
|
F0000002h IRQ1 GPU
|
|
|
|
|
F0000003h IRQ2 CDROM Decoder
|
|
|
|
|
F0000004h IRQ3 DMA controller
|
|
|
|
|
F0000005h IRQ4 RTC0 (timer0)
|
|
|
|
|
F0000006h IRQ5/IRQ6 RTC1 (timer1 or timer2)
|
|
|
|
|
F0000007h N/A Not used (this should be timer2)
|
|
|
|
|
F0000008h IRQ7 Controller (joypad/memcard)
|
|
|
|
|
F0000009h IRQ9 SPU
|
|
|
|
|
F000000Ah IRQ10 PIO ;uh, does the PIO have an IRQ signal? (IRQ10 is joypad)
|
|
|
|
|
F000000Bh IRQ8 SIO
|
|
|
|
|
F0000010h Exception ;CPU crashed (BRK,BadSyscall,Overflow,MemoryError, etc.)
|
|
|
|
|
F0000011h memory card (lower level BIOS functions)
|
|
|
|
|
F0000012h memory card (not used by BIOS; maybe used by Sony's devkit?)
|
|
|
|
|
F0000013h memory card (not used by BIOS; maybe used by Sony's devkit?)
|
|
|
|
|
```
|
|
|
|
|
Event Events:<br/>
|
|
|
|
|
```
|
|
|
|
|
F1xxxxxxh event (not used by BIOS; maybe used by Sony's devkit?)
|
|
|
|
|
```
|
|
|
|
|
Root Counter Events (Timers and Vblank):<br/>
|
|
|
|
|
```
|
|
|
|
|
F2000000h Root counter 0 (Dotclock) (hardware timer)
|
|
|
|
|
F2000001h Root counter 1 (horizontal retrace?) (hardware timer)
|
|
|
|
|
F2000002h Root counter 2 (one-eighth of system clock) (hardware timer)
|
|
|
|
|
F2000003h Root counter 3 (vertical retrace?) (this is a software timer)
|
|
|
|
|
```
|
|
|
|
|
User Events:<br/>
|
|
|
|
|
```
|
|
|
|
|
F3xxxxxxh user (not used by BIOS; maybe used by games and/or Sony's devkit?)
|
|
|
|
|
```
|
|
|
|
|
BIOS Events (including such that have nothing to do with BIOS):<br/>
|
|
|
|
|
```
|
|
|
|
|
F4000001h memory card (higher level BIOS functions)
|
|
|
|
|
F4000002h libmath (not used by BIOS; maybe used by Sony's devkit?)
|
|
|
|
|
```
|
|
|
|
|
Thread Events:<br/>
|
|
|
|
|
```
|
|
|
|
|
FFxxxxxxh thread (not used by BIOS; maybe used by Sony's devkit?)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Event Specs
|
|
|
|
|
```
|
|
|
|
|
0001h counter becomes zero
|
|
|
|
|
0002h interrupted
|
|
|
|
|
0004h end of i/o
|
|
|
|
|
0008h file was closed
|
|
|
|
|
0010h command acknowledged
|
|
|
|
|
0020h command completed
|
|
|
|
|
0040h data ready
|
|
|
|
|
0080h data end
|
|
|
|
|
0100h time out
|
|
|
|
|
0200h unknown command
|
|
|
|
|
0400h end of read buffer
|
|
|
|
|
0800h end of write buffer
|
|
|
|
|
1000h general interrupt
|
|
|
|
|
2000h new device
|
|
|
|
|
4000h system call instruction ;SYS(04h..FFFFFFFFh)
|
|
|
|
|
8000h error happened
|
|
|
|
|
8001h previous write error happened
|
|
|
|
|
0301h domain error in libmath
|
|
|
|
|
0302h range error in libmath
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Event modes
|
|
|
|
|
```
|
|
|
|
|
1000h Execute callback function, and stay busy (do NOT mark event as ready)
|
|
|
|
|
2000h Do NOT execute callback function, and mark event as ready
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Event Summary
|
|
|
|
|
Below is a list of all events (class,spec values) that are delivered and/or
|
|
|
|
|
undelivered by the BIOS in one way or another. The BIOS does internally open
|
|
|
|
|
five events for cdrom (class=F0000003h with spec=10h,20h,40h,80h,8000h). The
|
|
|
|
|
various other class/spec's are only delivered by the BIOS (but not received by
|
|
|
|
|
the BIOS) (ie. a game may open/enable memory card events to receive
|
|
|
|
|
notifications from the BIOS).<br/>
|
|
|
|
|
|
|
|
|
|
#### CDROM Events
|
|
|
|
|
```
|
|
|
|
|
F0000003h,10h cdrom DMA finished (all sectors finished)
|
|
|
|
|
F0000003h,20h cdrom ?
|
|
|
|
|
F0000003h,40h cdrom dead feature (delivered only by unused functions)
|
|
|
|
|
F0000003h,80h cdrom INT4 (reached end of disk)
|
|
|
|
|
F0000003h,100h n/a ? ;undelivered, but not opened, nor delivered
|
|
|
|
|
F0000003h,200h ;undelivered, but not opened
|
|
|
|
|
F0000003h,8000h
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Memory Card - Higher Level File/Device Events
|
|
|
|
|
```
|
|
|
|
|
0000000xh,4 card file handle (x=fd) done okay
|
|
|
|
|
F4000001h,4 card done okay (len=0)
|
|
|
|
|
F4000001h,100h card err busy ;A(A9h)
|
|
|
|
|
F4000001h,2000h card err eject ;A(AAh) or unformatted (bad "MC" id)
|
|
|
|
|
F4000001h,8000h card err write ;A(A8h) or A(AEh) or general error
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Memory Card - Lower Level Hardware I/O Events
|
|
|
|
|
```
|
|
|
|
|
F0000011h,4 finished okay
|
|
|
|
|
F0000011h,100h err busy
|
|
|
|
|
F0000011h,200h n/a ?
|
|
|
|
|
F0000011h,2000h err
|
|
|
|
|
F0000011h,8000h err
|
|
|
|
|
F0000011h,8001h err (this one is NOT undelivered!)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Timer/Vblank Events
|
|
|
|
|
```
|
|
|
|
|
F2000000h,2 Timer0 (IRQ4)
|
|
|
|
|
F2000001h,2 Timer1 (IRQ5)
|
|
|
|
|
F2000002h,2 Timer2 (IRQ6)
|
|
|
|
|
F2000003h,2 Vblank (IRQ0) (unstable since IRQ0 is also used for joypad)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Default IRQ Handler Events (very unstable, don't use)
|
|
|
|
|
```
|
|
|
|
|
F0000001h,1000h ;IRQ0 (VBLANK)
|
|
|
|
|
F0000002h,1000h ;IRQ1 (GPU)
|
|
|
|
|
F0000003h,1000h ;IRQ2 (CDROM)
|
|
|
|
|
F0000004h,1000h ;IRQ3 (DMA)
|
|
|
|
|
F0000005h,1000h ;IRQ4 (TMR0)
|
|
|
|
|
F0000006h,1000h ;IRQ5 (TMR1)
|
|
|
|
|
F0000006h,1000h ;IRQ6 (TMR2) (accidently uses same event as TMR1)
|
|
|
|
|
F0000008h,1000h ;IRQ7 (joypad/memcard)
|
|
|
|
|
F0000009h,1000h ;IRQ9 (SPU)
|
|
|
|
|
F000000Ah,1000h ;IRQ10 (Joypad and PIO)
|
|
|
|
|
F000000Bh,1000h ;IRQ8 (SIO)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Unresolved Exception Events
|
|
|
|
|
```
|
|
|
|
|
F0000010h,1000h unknown exception ;neither IRQ nor SYSCALL
|
|
|
|
|
F0000010h,4000h unknown syscall ;syscall(04h..FFFFFFFFh)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Thread Functions
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(0Eh) OpenThread(reg\_PC,reg\_SP\_FP,reg\_GP)
|
2020-07-23 20:49:17 +02:00
|
|
|
Searches a free TCB, marks it as used, and stores the inital program counter
|
|
|
|
|
(PC), global pointer (GP aka R28), stack pointer (SP aka R29), and frame
|
|
|
|
|
pointer (FP aka R30) (using the same value for SP and FP). All other registers
|
|
|
|
|
are left uninitialized (eg. may contain values from an older closed thread,
|
|
|
|
|
that includes the SR register, see note).<br/>
|
|
|
|
|
The return value is the new thread handle (in range FF000000h..FF000003h,
|
|
|
|
|
assuming that 4 TCBs are allocated) or FFFFFFFFh if there's no free TCB. The
|
|
|
|
|
function returns to the old current thread, use "ChangeThread" to switch to the
|
|
|
|
|
new thread.<br/>
|
|
|
|
|
Note: The desired max number of TCBs can be specified in the SYSTEM.CNF boot
|
|
|
|
|
file (the default is "TCB = 4", one initially used for the boot executable,
|
|
|
|
|
plus 3 free threads).<br/>
|
|
|
|
|
|
|
|
|
|
#### BUG - Unitialized SR Register
|
|
|
|
|
OpenThread does NOT initialize the SR register (cop0r12) of the new thread.
|
|
|
|
|
Upon powerup, the bootcode zerofills the TCB memory (so, the SR of new threads
|
|
|
|
|
will be initially zero; ie. Kernel Mode, IRQ's disabled, and COP2 disabled).
|
|
|
|
|
However, when closing/reopening threads, the SR register will have the value of
|
|
|
|
|
the old closed thread (so it may get started with IRQs enabled, and, in worst
|
|
|
|
|
case, if the old thread should have switched to User Mode, even without access
|
|
|
|
|
to KSEG0, KSEG1 memory).<br/>
|
|
|
|
|
Or, ACTUALLY, the memory is NOT zerofilled on powerup... so SR is total random?<br/>
|
|
|
|
|
|
|
|
|
|
#### B(0Fh) CloseThread(handle)
|
|
|
|
|
Marks the TCB for the specified thread as unused. The function can be used for
|
|
|
|
|
any threads, including for the current thread.<br/>
|
|
|
|
|
Closing the current thread doesn't terminate the current thread, so it may
|
|
|
|
|
cause problems once when opening a new thread, however, it should be stable to
|
|
|
|
|
execute the sequence "DisableInterrupts, CloseCurrentThread,
|
|
|
|
|
ChangeOtherThread".<br/>
|
|
|
|
|
The return value is always 1 (even if the handle was already closed).<br/>
|
|
|
|
|
|
|
|
|
|
#### B(10h) ChangeThread(handle)
|
|
|
|
|
Pauses the current thread, and activates the selected new thread (or crashes if
|
|
|
|
|
the specified handle was unused or invalid).<br/>
|
|
|
|
|
The return value is always 1 (stored in the R2 entry of the TCB of the old
|
|
|
|
|
thread, so the return value will be received once when changing back to the old
|
|
|
|
|
thread).<br/>
|
|
|
|
|
Note: The BIOS doesn't automatically switch from one thread to another. So, all
|
|
|
|
|
other threads remain paused until the current thread uses ChangeThread to pass
|
|
|
|
|
control to another thread.<br/>
|
|
|
|
|
Each thread is having it's own CPU registers (R1..R31,HI,LO,SR,PC), the
|
|
|
|
|
registers are stored in the TCB of the old thread, and restored when switching
|
|
|
|
|
back to that thread. Mind that other registers (I/O Ports or GTE registers
|
|
|
|
|
aren't stored automatically, so, when needed, they need to be pushed/popped by
|
|
|
|
|
software before/after ChangeThread).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### C(05h) get\_free\_TCB\_slot()
|
2020-07-23 20:49:17 +02:00
|
|
|
Subfunction for OpenThread, returns the number of the first free TCB (usually
|
|
|
|
|
in range 0..3) or FFFFFFFFh if there's no free TCB.<br/>
|
|
|
|
|
|
|
|
|
|
#### SYS(03h) ChangeThreadSubFunction(addr) ;syscall with r4=03h, r5=addr
|
|
|
|
|
Subfunction for ChangeThread, R5 contains the address of the new TCB, just like
|
|
|
|
|
all exceptions, the syscall exception is saving the CPU registers in the
|
|
|
|
|
current TCB, but does then apply the new TCB as current TCB, and so, it does
|
|
|
|
|
then enter the new thread when returning from the exception.<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Timer Functions
|
|
|
|
|
#### Timers (aka Root Counters)
|
|
|
|
|
The three hardware timers aren't internally used by any BIOS functions, so they
|
|
|
|
|
can be freely used by the game, either via below functions, or via direct I/O
|
|
|
|
|
access.<br/>
|
|
|
|
|
|
|
|
|
|
#### Vblank
|
|
|
|
|
Some of the below functions are allowing to use Vblank IRQs as a fourth
|
|
|
|
|
"timer". However, Vblank IRQs are internally used by the BIOS for handling
|
|
|
|
|
joypad and memory card accesses. One could theoretically use two separate
|
|
|
|
|
Vblank IRQ handlers, one for joypad, and one as "timer", but the BIOS is much
|
|
|
|
|
too unstable for such "shared" IRQ handling (it may occassionally miss one of
|
|
|
|
|
the two handlers).<br/>
|
|
|
|
|
So, although Vblank IRQs are most important for games, the PSX BIOS doesn't
|
|
|
|
|
actually allow to use them for purposes other than joypad access. A possible
|
|
|
|
|
workaround is to examine the status byte in one of the joypad buffers (ie. the
|
2020-07-23 22:41:06 +02:00
|
|
|
InitPad(buf1,22h,buf2,22h) buffers). Eg. a wait\_for\_vblank function could look
|
2020-07-23 20:49:17 +02:00
|
|
|
like so: set buf1[0]=55h, then wait until buf1[0]=00h or buf1[0]=FFh.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(02h) init\_timer(t,reload,flags)
|
|
|
|
|
When t=0..2, resets the old timer mode by setting [1F801104h+t\*16]=0000h,
|
|
|
|
|
applies the reload value by [1F801108h+t\*16]=reload, computes the new mode:<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
```
|
|
|
|
|
if flags.bit4=0 then mode=0048h else mode=0049h
|
|
|
|
|
if flags.bit0=0 then mode=mode OR 100h
|
|
|
|
|
if flags.bit12=1 then mode=mode OR 10h
|
|
|
|
|
```
|
2020-07-23 22:41:06 +02:00
|
|
|
and applies it by setting [1F801104h+t\*16]=mode, and returns 1. Does nothing
|
2020-07-23 20:49:17 +02:00
|
|
|
and returns zero for t\>2.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(03h) get\_timer(t)
|
|
|
|
|
Reads the current timer value: Returns halfword[1F801100h+t\*16] for t=0..2.
|
2020-07-23 20:49:17 +02:00
|
|
|
Does nothing and returns zero for t\>2.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(04h) enable\_timer\_irq(t)
|
|
|
|
|
#### B(05h) disable\_timer\_irq(t)
|
2020-07-23 20:49:17 +02:00
|
|
|
Enables/disables timer or vblank interrupt enable bits in [1F801074h], bit4,5,6
|
|
|
|
|
for t=0,1,2, or bit0 for t=3, or random/garbage bits for t\>3. The enable
|
|
|
|
|
function returns 1 for t=0..2, and 0 for t=3. The disable function returns
|
|
|
|
|
always 1.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(06h) restart\_timer(t)
|
|
|
|
|
Sets the current timer value to zero: Sets [1F801100h+t\*16]=0000h and returns 1
|
2020-07-23 20:49:17 +02:00
|
|
|
for t=0..2. Does nothing and returns zero for t\>2.<br/>
|
|
|
|
|
|
|
|
|
|
#### C(0Ah) - ChangeClearRCnt(t,flag) ;root counter (aka timer)
|
|
|
|
|
Selects what the kernel's timer/vblank IRQ handlers shall do after they have
|
|
|
|
|
processed an IRQ (t=0..2: timer 0..2, or t=3: vblank) (flag=0: do nothing; or
|
|
|
|
|
flag=1: automatically acknowledge the IRQ and immediately return from
|
|
|
|
|
exception). The function returns the old (previous) flag value.<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Joypad Functions
|
|
|
|
|
#### Pad Input
|
|
|
|
|
Joypads should be initialized via InitPad(buf1,22h,buf2,22h), and StartPad().
|
|
|
|
|
The main program can read the pad data from the buf1/buf2 addresses (including
|
|
|
|
|
Status, ID1, button states, and any kind of analogue inputs). For more info on
|
|
|
|
|
ID1, Buttons and analogue inputs, see<br/>
|
|
|
|
|
[Controllers and Memory Cards](controllersandmemorycards.md)<br/>
|
|
|
|
|
Note: The BIOS doesn't include any functions for sending custom data to the
|
|
|
|
|
pads (such like for controlling rumble motors).<br/>
|
|
|
|
|
|
|
|
|
|
#### B(12h) - InitPad(buf1, siz1, buf2, siz2)
|
|
|
|
|
Memorizes the desired buf1/buf2 addresses, zerofills the buffers by using the
|
|
|
|
|
siz1/siz2 buffer size values (which should be 22h bytes each). And does some
|
|
|
|
|
initialization on the PadCardIrq element (but doesn't enqueue it, that must be
|
2020-07-23 22:41:06 +02:00
|
|
|
done by a following call to StartPad), and does set the "pad\_enable\_flag", that
|
|
|
|
|
flag can be also set/cleared via InitCard(pad\_enable), where it selects if the
|
2020-07-23 20:49:17 +02:00
|
|
|
Pads are kept handled together with Memory Cards. buf1/buf2 are having the
|
|
|
|
|
following format:<br/>
|
|
|
|
|
```
|
|
|
|
|
00h Status (00h=okay, FFh=timeout/wrong ID2)
|
|
|
|
|
01h ID1 (eg. 41h=digital_pad, 73h=analogue_pad, 12h=mouse, etc.)
|
|
|
|
|
02h..21h Data (max 16 halfwords, depending on lower 4bit of ID1)
|
|
|
|
|
```
|
|
|
|
|
Note: InitPad does initially zerofill the buffers, so, until the first IRQ is
|
|
|
|
|
processed, the initial status is 00h=okay, with buttons=0000h (all buttons
|
|
|
|
|
pressed), to fix that situation, change the two status bytes to FFh after
|
|
|
|
|
calling InitPad (or alternately, reject ID1=00h).<br/>
|
2020-07-23 22:41:06 +02:00
|
|
|
Once when the PadCardIrq is enqueued via StartPad, and while "pad\_enable\_flag"
|
2020-07-23 20:49:17 +02:00
|
|
|
is set, the data for (both) Pad1 and Pad2 is read on Vblank interrupts, and
|
|
|
|
|
stored in the buffers, the IRQ handler stores up to 22h bytes in the buffer
|
|
|
|
|
(regardless of the siz1/siz2 values) (eg. a Multitap adaptor uses all 22h
|
|
|
|
|
bytes).<br/>
|
|
|
|
|
|
|
|
|
|
#### B(13h) - StartPad()
|
|
|
|
|
Should be used after InitPad. Enqueues the PadCardIrq handler, and does
|
|
|
|
|
additionally initialize some flags.<br/>
|
|
|
|
|
|
|
|
|
|
#### B(14h) - StopPad()
|
|
|
|
|
Dequeues the PadCardIrq handler. Note that this handler is also used for memory
|
|
|
|
|
cards, so it'll "stop" cards, too.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(15h) - OutdatedPadInitAndStart(type, button\_dest, unused, unused)
|
2020-07-23 20:49:17 +02:00
|
|
|
This is an extremely bizarre and restrictive function - don't use! The function
|
|
|
|
|
fails unless type is 20000000h or 20000001h (the type value has no other
|
|
|
|
|
function). The function uses "buf1/buf2" addresses that are located somewhere
|
|
|
|
|
"hidden" within the BIOS variables region, the only way to read from that
|
|
|
|
|
internal buffers is to use the ugly "OutdatedPadGetButtons()" function. For
|
|
|
|
|
some strange reason it FFh-fills buf1/buf2, and does then call
|
|
|
|
|
InitPad(buf1,22h,buf2,22) (which does immediately 00h-fill the previously
|
|
|
|
|
FFh-filled buffers), and does then call StartPad().<br/>
|
2020-07-23 22:41:06 +02:00
|
|
|
Finally, it does memorize the "button\_dest" address (see
|
2020-07-23 20:49:17 +02:00
|
|
|
OutdatedPadGetButtons() for details on that value). The two unused parameters
|
|
|
|
|
have no function, however, they are internally written back to the stack
|
|
|
|
|
locations reserved for parameter 2 and 3, ie. at [SP+08h] and [SP+0Ch] on the
|
|
|
|
|
caller's stack, so the function MUST be called with all four parameters
|
|
|
|
|
allocated on stack. Return value is 2 (or 0 if type was disliked).<br/>
|
|
|
|
|
|
|
|
|
|
#### B(16h) - OutdatedPadGetButtons()
|
|
|
|
|
This is a very ugly function, using the internal "buf1/buf2" values from
|
2020-07-23 22:41:06 +02:00
|
|
|
"OutdatedPadInitAndStart" and the "button\_dest" value that was passed to that
|
2020-07-23 20:49:17 +02:00
|
|
|
function.<br/>
|
2020-07-23 22:41:06 +02:00
|
|
|
If "button\_dest" is non-zero, then this function is automatically called by the
|
|
|
|
|
PadCardIrq handler, and stores it's return value at [button\_dest] (where it may
|
|
|
|
|
be read by the main program). If "button\_dest" is zero, then it isn't called
|
2020-07-23 20:49:17 +02:00
|
|
|
automatically, and it \<can\> be called manually (with return value in R2),
|
2020-07-23 22:41:06 +02:00
|
|
|
however, it does additionally write the return value to [button\_dest], ie. to
|
2020-07-23 20:49:17 +02:00
|
|
|
[00000000h] in this case, destroying that memory location.<br/>
|
|
|
|
|
The return value itself is useless garbage: The lower 16bit contain the pad1
|
|
|
|
|
buttons, the upper 16bit the pad2 buttons, of which, both values have reversed
|
|
|
|
|
byte-order (ie. the first button byte in upper 8bit). The function works only
|
|
|
|
|
with controller IDs 41h (digital joypad) and 23h (nonstandard device). For
|
|
|
|
|
ID=23h, the halfword is ORed with 07C7h, and bit6,7 are then cleared if the
|
|
|
|
|
analogue inputs are greater than 10h. For ID=41h the data is left intact. Any
|
|
|
|
|
other ID values, or disconnected joypads, cause the halfword to be set to FFFFh
|
|
|
|
|
(same as when no buttons are pressed), that includes newer analogue pads
|
|
|
|
|
(unless they are switched to "digital" mode).<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS GPU Functions
|
|
|
|
|
#### A(48h) - SendGP1Command(gp1cmd)
|
|
|
|
|
Writes [1F801814h]=gp1cmd. There's no return value (r2 is left unchanged).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(49h) - GPU\_cw(gp0cmd) ;send GP0 command word
|
|
|
|
|
Calls gpu\_sync(), and does then write [1F801810h]=gp0cmd. Returns the return
|
|
|
|
|
value from the gpu\_sync() call.<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(4Ah) - GPU\_cwp(src,num) ;send GP0 command word and parameter words
|
|
|
|
|
Calls gpu\_sync(), and does then copy "num" words from [src and up] to
|
2020-07-23 20:49:17 +02:00
|
|
|
[1F801810h], src should usually point to a command word, followed by num-1
|
|
|
|
|
parameter words. Transfer is done by software (without DMA). Always returns 0.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(4Bh) - send\_gpu\_linked\_list(src)
|
|
|
|
|
Transfer an OT via DMA. Calls gpu\_sync(), and does then write
|
2020-07-23 20:49:17 +02:00
|
|
|
[1F801814h]=4000002h, [1F8010F4h]=0, [1F8010F0h]=[1F8010F0h] OR 800h,
|
|
|
|
|
[1F8010A0h]=src, [1F8010A4h]=0, [1F8010A8h]=1000401h. The function does
|
|
|
|
|
additionally output a bunch of TTY status messages via printf. The function
|
|
|
|
|
doesn't wait until the DMA is completed. There's no return value.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(4Ch) - gpu\_abort\_dma()
|
2020-07-23 20:49:17 +02:00
|
|
|
Writes [1F8010A8h]=401h, [1F801814h]=4000000h, [1F801814h]=2000000h,
|
|
|
|
|
[1F801814h]=1000000h. Ie. stops GPU DMA, and issues GP1(4), GP1(2), GP1(1).
|
|
|
|
|
Returns 1F801814h, ie. the I/O address.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(4Dh) - GetGPUStatus()
|
|
|
|
|
Reads [1F801814h] and returns that value.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(46h) - GPU\_dw(Xdst,Ydst,Xsiz,Ysiz,src)
|
|
|
|
|
Waits until GPUSTAT.Bit26 is set (unlike gpu\_sync, which waits for Bit28), and
|
2020-07-23 20:49:17 +02:00
|
|
|
does then [1F801810h]=A0000000h, [1F801810h]=YdstXdst, [1F801810h]=YsizXsiz,
|
|
|
|
|
and finally transfers "N" words from [src and up] to [1F801810h], where "N" is
|
2020-07-23 22:41:06 +02:00
|
|
|
"Xsiz\*Ysiz/2". The data is transferred by software (without DMA) (by code
|
2020-07-23 20:49:17 +02:00
|
|
|
executed in the uncached BIOS region with high waitstates, so the data transfer
|
|
|
|
|
is very SLOW).<br/>
|
2020-07-23 22:41:06 +02:00
|
|
|
Caution: If "Xsiz\*Ysiz" is odd, then the last halfword is NOT transferred, so
|
2020-07-23 20:49:17 +02:00
|
|
|
the GPU stays waiting for the last data value.<br/>
|
2020-07-23 22:41:06 +02:00
|
|
|
Returns [SP+04h]=Ydst, [SP+08h]=Xsiz, [SP+0Ch]=Ysiz, [SP+10h]=src+N\*4, and
|
|
|
|
|
R2=src=N\*4.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(47h) - gpu\_send\_dma(Xdst,Ydst,Xsiz,Ysiz,src)
|
|
|
|
|
Calls gpu\_sync(), writes [1F801810h]=A0000000h, [1F801814h]=4000002h,
|
|
|
|
|
[1F8010F0h]=[1F8010F0h] OR 800h, [1F8010A0h]=src, [1F8010A4h]=N\*10000h+10h
|
|
|
|
|
(where N="Xsiz\*Ysiz/32"), [1F8010A8h]=1000201h.<br/>
|
|
|
|
|
Caution: If "Xsiz\*Ysiz" is not a multiple of 32, then the last halfword(s) are
|
2020-07-23 20:49:17 +02:00
|
|
|
NOT transferred, so the GPU stays waiting for that values.<br/>
|
|
|
|
|
Returns R2=1F801810h, and [SP+04h]=Ydst, [SP+08h]=Xsiz, [SP+0Ch]=Ysiz.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(4Eh) - gpu\_sync()
|
2020-07-23 20:49:17 +02:00
|
|
|
If DMA is off (when GPUSTAT.Bit29-30 are zero): Waits until GPUSTAT.Bit28=1 (or
|
|
|
|
|
until timeout).<br/>
|
2020-07-23 22:41:06 +02:00
|
|
|
If DMA is on: Waits until D2\_CHCR.Bit24=0 (or until timeout), and does then
|
2020-07-23 20:49:17 +02:00
|
|
|
wait until GPUSTAT.Bit28=1 (without timeout, ie. may hang forever), and does
|
|
|
|
|
then turn off DMA via GP1(04h).<br/>
|
|
|
|
|
Returns 0 (or -1 in case of timeout, however, the timeout values are very big,
|
|
|
|
|
so it may take a LOT of seconds before it returns).<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Memory Allocation
|
|
|
|
|
#### A(33h) - malloc(size)
|
|
|
|
|
Allocates size bytes on the heap, and returns the memory handle (aka the
|
|
|
|
|
address of the allocated memory block). The address of the block is guaranteed
|
|
|
|
|
to by aligned to 4-byte memory boundaries. Size is rounded up to a multiple of
|
|
|
|
|
4 bytes. The address may be in KUSEG, KSEG0, or KSEG1, depending on the address
|
|
|
|
|
passed to InitHeap.<br/>
|
|
|
|
|
Caution: The BIOS (tries to) initialize the heap size to 0 bytes (actually it
|
|
|
|
|
accidently overwrites that initial setting by garbage during relocation), so
|
|
|
|
|
any call to malloc will fail, unless InitHeap has been used to initialize the
|
|
|
|
|
address/size of the heap.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(34h) - free(buf)
|
|
|
|
|
Deallocates the memory block. There's no return value, and no error checking.
|
|
|
|
|
The function simply sets [buf-4]=[buf-4] OR 00000001h, so if buf is an invalid
|
|
|
|
|
handle it may destroy memory at [buf-4], or trigger a memory exception (for
|
|
|
|
|
example, when buf=0).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(37h) - calloc(sizx, sizy) ;SLOW!
|
2020-07-23 22:41:06 +02:00
|
|
|
Allocates xsiz\*ysiz bytes by calling malloc(xsiz\*ysiz), and, unlike malloc, it
|
2020-07-23 20:49:17 +02:00
|
|
|
does additionally zerofill the memory via SLOW "bzero" function. Returns the
|
|
|
|
|
address of the memory block (or zero if failed).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(38h) - realloc(old\_buf, new\_size) ;SLOW!
|
|
|
|
|
If "old\_buf" is zero, executes malloc(new\_size), and returns r2=new\_buf (or
|
|
|
|
|
0=failed). Else, if "new\_size" is zero, executes free(old\_buf), and returns
|
|
|
|
|
r2=garbage. Else, executes malloc(new\_size), bcopy(old\_buf,new\_buf,new\_size),
|
|
|
|
|
and free(old\_buf), and returns r2=new\_buf (or 0=failed).<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
Caution: The bcopy function is SLOW, and realloc does accidently copy
|
2020-07-23 22:41:06 +02:00
|
|
|
"new\_size" bytes from old\_buf, so, if the old\_size was smaller than new\_size
|
2020-07-23 20:49:17 +02:00
|
|
|
then it'll copy whatever garbage data - in worst case, if it exceeds the top of
|
|
|
|
|
the 2MB RAM region, it may crash with a locked memory exception, although
|
|
|
|
|
that'd happen only if SetMemSize(2) was used to restrict RAM to 2MBs.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(39h) - InitHeap(addr, size)
|
|
|
|
|
Initializes the address and size of the heap - the BIOS does not automatically
|
|
|
|
|
do this, so, before using the heap, InitHeap must be called by software.
|
|
|
|
|
Usually, the heap would be memory region between the end of the boot
|
|
|
|
|
executable, and the bottom of the executable's stack. InitHeap can be also used
|
|
|
|
|
to deallocate all memory handles (eg. when a new exe file has been loaded, it
|
|
|
|
|
may use it to deallocate all old memory).<br/>
|
|
|
|
|
The heap is used only by malloc/realloc/calloc/free, and by the "qsort"
|
|
|
|
|
function.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(00h) alloc\_kernel\_memory(size)
|
|
|
|
|
#### B(01h) free\_kernel\_memory(buf)
|
2020-07-23 20:49:17 +02:00
|
|
|
Same as malloc/free, but, instead of the heap, manages the 8kbyte control block
|
|
|
|
|
memory at A000E000h..A000FFFFh. This region is used by the kernel to allocate
|
2020-07-23 22:41:06 +02:00
|
|
|
ExCBs (4x08h bytes), EvCBs (N\*1Ch bytes), TCBs (N\*0C0h bytes), and the process
|
2020-07-23 20:49:17 +02:00
|
|
|
control block (1x04h bytes). Unlike the heap, the BIOS does automatically
|
|
|
|
|
initialize this memory region via SysInitMemory(addr,size), and does
|
|
|
|
|
autimatically allocate the above data (where the number of EvCBs and TCBs is as
|
|
|
|
|
specified in the SYSTEM.CNF file). Note: FCBs and DCBs are located elsewhere,
|
|
|
|
|
at fixed locations in the kernel variables area.<br/>
|
|
|
|
|
|
|
|
|
|
#### Scratchpad Note
|
|
|
|
|
The kernel doesn't include any allocation functions for the scratchpad (nor do
|
|
|
|
|
any kernel functions use that memory area), so the executable can freely use
|
|
|
|
|
the "fast" memory at 1F800000h..1F8003FFh.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(9Fh) - SetMemSize(megabytes)
|
|
|
|
|
Changes the effective RAM size (2 or 8 megabytes) by manipulating port
|
|
|
|
|
1F801060h, and additionally stores the size in megabytes in RAM at [00000060h].<br/>
|
|
|
|
|
Note: The BIOS bootcode accidently sets the RAM value to 2MB (which is the
|
|
|
|
|
correct physical memory size), but initializes the I/O port to 8MB (which
|
|
|
|
|
mirrors the physical 2MB within that 8MB region), so the initial values don't
|
|
|
|
|
match up with each other.<br/>
|
|
|
|
|
Caution: Applying the correct size of 2MB may cause the "realloc" function to
|
|
|
|
|
crash (that function may accidently access memory above 2MB).<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Memory Fill/Copy/Compare (SLOW)
|
|
|
|
|
Like most A(NNh) functions, below functions are executed in uncached BIOS ROM,
|
|
|
|
|
the ROM has very high waitstates, and the 32bit opcodes are squeezed through an
|
|
|
|
|
8bit bus. Moreover, below functions are restricted to process the data
|
|
|
|
|
byte-by-byte. So, they are very-very-very slow, don't even think about using
|
|
|
|
|
them.<br/>
|
|
|
|
|
Of course, that applies also for most other BIOS functions. But it's becoming
|
|
|
|
|
most obvious for these small functions; memcpy takes circa 160 cycles per byte
|
|
|
|
|
(reasonable would be less than 4 cycles), and bzero takes circa 105 cycles per
|
|
|
|
|
byte (reasonable would be less than 1 cycles).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(2Ah) - memcpy(dst, src, len)
|
|
|
|
|
Copies len bytes from [src..src+len-1] to [dst..dst+len-1]. Refuses to copy any
|
|
|
|
|
data when dst=00000000h or when len\>7FFFFFFFh. The return value is always
|
|
|
|
|
the incoming "dst" value.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(2Bh) - memset(dst, fillbyte, len)
|
|
|
|
|
Fills len bytes at [dst..dst+len-1] with the fillbyte value. Refuses to fill
|
|
|
|
|
memory when dst=00000000h or when len\>7FFFFFFFh. The return value is the
|
|
|
|
|
incoming "dst" value (or zero, when len=0 or len\>7FFFFFFFh).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(2Ch) - memmove(dst, src, len) - bugged
|
|
|
|
|
Same as memcpy, but (attempts) to support overlapping src/dst regions, by using
|
|
|
|
|
a backwards transfer when src\<dst (and, for some reason, only when
|
|
|
|
|
dst\>=src+len).<br/>
|
|
|
|
|
BUG: The backwards variant accidently transfers len+1 bytes from [src+len..src]
|
|
|
|
|
down to [dst+len..dst].<br/>
|
|
|
|
|
|
|
|
|
|
#### A(2Dh) - memcmp(src1, src2, len) - bugged
|
|
|
|
|
Compares len bytes at [src1..src1+len-1] with [src2..src2+len-1], and
|
|
|
|
|
(attempts) to return the difference between the first mismatching bytes, ie.
|
|
|
|
|
[src1+N]-[src2+N], or 0 if there are no mismatches. Refuses to compare data
|
|
|
|
|
when src1 or src2 is 00000000h, and returns 0 in that case.<br/>
|
|
|
|
|
BUG: Accidently returns the difference between the bytes AFTER the first
|
|
|
|
|
mismatching bytes, ie. [src1+N+1]-[src2+N+1].<br/>
|
|
|
|
|
That means that a return value of 0 can mean absolutely anything: That the
|
|
|
|
|
memory blocks are identical, or that a mismatch has been found (but that the
|
|
|
|
|
NEXT byte after the mismatch does match), or that the function has failed (due
|
|
|
|
|
to src1 or src2 being 00000000h).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(2Eh) - memchr(src, scanbyte, len)
|
|
|
|
|
Scans [src..src+len-1] for the first occurence of scanbyte. Refuses to scan any
|
|
|
|
|
data when src=00000000h or when len\>7FFFFFFFh. Returns the address of that
|
|
|
|
|
first occurence, or 0 if the scanbyte wasn't found.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(27h) - bcopy(src, dst, len)
|
|
|
|
|
Same as "memcpy", but with "src" and "dst" exchanged. That is, the first
|
|
|
|
|
parameter is "src", the refuse occurs when "src" is 00000000h, and, returns the
|
|
|
|
|
incoming "src" value (whilst "memcpy" uses "dst" in that places).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(28h) - bzero(dst, len)
|
|
|
|
|
Same as memset, but uses 00h as fixed fillbyte value.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(29h) - bcmp(ptr1, ptr2, len) - bugged
|
|
|
|
|
Same as "memcmp", with exactly the same bugs.<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS String Functions
|
|
|
|
|
#### A(15h) - strcat(dst, src)
|
|
|
|
|
Appends src to the end of dst. Searches the ending 00h byte in dst, and copies
|
|
|
|
|
src to that address, up to including the ending 00h byte in src. Returns the
|
|
|
|
|
incoming dst value. Refuses to do anything if src or dst is 00000000h (and
|
|
|
|
|
returns 0 in that case).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(16h) - strncat(dst, src, maxlen)
|
|
|
|
|
Same as "strcat", but clipped to "MaxSrc=(min(0,maxlen)+1)" characters, ie. the
|
|
|
|
|
total length is max "length(dst)+min(0,maxlen)+1". If src is longer or equal to
|
|
|
|
|
"MaxSrc", then only the first "MaxSrc" chars are copied (with the last byte
|
|
|
|
|
being replaced by 00h). If src is shorter, then everything up to the ending 00h
|
|
|
|
|
byte gets copied, but without additional padding (unlike as in "strncpy").<br/>
|
|
|
|
|
|
|
|
|
|
#### A(17h) - strcmp(str1, str2)
|
|
|
|
|
Compares the strings up to including ending 00h byte. Returns 0 if they are
|
|
|
|
|
identical, or otherwise [str1+N]-[str2+N], where N is the location of the first
|
|
|
|
|
mismatch, the two bytes are sign-expanded to 32bits before doing the
|
|
|
|
|
subtraction. The function rejects str1/str2 values of 00000000h (and returns
|
|
|
|
|
0=both are zero, -1=only str1 is zero, and +1=only str2 is zero).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(18h) - strncmp(str1, str2, maxlen)
|
|
|
|
|
Same as "strcmp" but stops after comparing "maxlen" characters (and returns 0
|
|
|
|
|
if they did match). If the strings are shorter, then comparision stops at the
|
|
|
|
|
ending 00h byte (exactly as for strcmp).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(19h) - strcpy(dst, src)
|
|
|
|
|
Copies data from src to dst, up to including the ending 00h byte. Refuses to
|
|
|
|
|
copy anything if src or dst is 00000000h. Returns the incoming dst address (or
|
|
|
|
|
0 if copy was refused).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(1Ah) - strncpy(dst, src, maxlen)
|
|
|
|
|
Same as "strcpy", but clipped to "maxlen" characters. If src is longer or equal
|
|
|
|
|
to maxlen, then only the first "maxlen" chars are copied (but without appending
|
|
|
|
|
an ending 00h byte to dst). If src is shorter, then the remaining bytes in dst
|
|
|
|
|
are padded with 00h bytes.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(1Bh) - strlen(src)
|
|
|
|
|
Returns the length of the string up to excluding the ending 00h byte (or 0 when
|
|
|
|
|
src is 00000000h).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(1Ch) - index(src, char)
|
|
|
|
|
#### A(1Dh) - rindex(src, char)
|
|
|
|
|
#### A(1Eh) - strchr(src, char) ;exactly the same as "index"
|
|
|
|
|
#### A(1Fh) - strrchr(src, char) ;exactly the same as "rindex"
|
|
|
|
|
Scans for the first (index) or last (rindex) occurence of char in the string.
|
|
|
|
|
Returns the memory address of that occurence (or 0 if there's no occurence, or
|
|
|
|
|
if src is 00000000h). Char may be 00h (returns the end address of the string).
|
|
|
|
|
Note that, despite of the function names, the return value is always a memory
|
|
|
|
|
address, NOT an index value relative to src.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(20h) - strpbrk(src, list)
|
|
|
|
|
Scans for the first occurence of a character that is contained in the list. The
|
|
|
|
|
list contains whatever desired characters, terminated by 00h.<br/>
|
|
|
|
|
Returns the address of that occurence, or 0 if there was none. BUG: If there
|
|
|
|
|
was no occurence, it returns 0 only if src[0]=00h, and otherwise returns the
|
|
|
|
|
incoming "src" value (which is the SAME return value as when a occurence did
|
|
|
|
|
occur on 1st character).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(21h) - strspn(src, list)
|
|
|
|
|
#### A(22h) - strcspn(src, list)
|
|
|
|
|
Scans for the first occurence of a character that is (strspn), or that isn't
|
|
|
|
|
(strcspn) contained in the list. The list contains whatever desired characters,
|
|
|
|
|
terminated by 00h.<br/>
|
|
|
|
|
Returns the index (relative to src) of that occurence. If there was no
|
|
|
|
|
occurence, then it returns the length of src. That silly return values do not
|
|
|
|
|
actually indicate if an occurence has been found or not (unless one checks for
|
|
|
|
|
[src+index]=00h or so).<br/>
|
2020-07-23 22:41:06 +02:00
|
|
|
\*\*\*<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
"The strcspn() function shall compute the length (in bytes) of the maximum
|
|
|
|
|
initial segment of the string pointed to by s1 which consists entirely of bytes
|
|
|
|
|
not from the string pointed to by s2."<br/>
|
|
|
|
|
"The strspn() function shall compute the length (in bytes) of the maximum
|
|
|
|
|
initial segment of the string pointed to by s1 which consists entirely of bytes
|
|
|
|
|
from the string pointed to by s2."<br/>
|
2020-07-23 22:41:06 +02:00
|
|
|
\*\*\*<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
Hmmmm, that'd be vice-versa?<br/>
|
|
|
|
|
|
|
|
|
|
#### A(23h) - strtok(src, list) ;first call
|
|
|
|
|
#### A(23h) - strtok(0, list) ;further call(s)
|
|
|
|
|
Used to split a string into fragments, list contains a list of characters that
|
|
|
|
|
are to be treated as separators, terminated by 00h.<br/>
|
|
|
|
|
The first call copies the incoming string to a buffer in the BIOS variables
|
|
|
|
|
area (the buffer size is 100h bytes, so the string should be max 255 bytes
|
|
|
|
|
long, plus the ending 00h byte, otherwise the function destroys other BIOS
|
|
|
|
|
variables), it does then search the first fragment, starting at the begin of
|
|
|
|
|
the buffer. Further calls (with src=00000000h) are searching further fragments,
|
|
|
|
|
starting at the buffer address from the previous call. The internal buffer is
|
|
|
|
|
used only for strtok, so its contents (and the returned string fragments)
|
|
|
|
|
remain intact until a new first call to strtok takes place.<br/>
|
|
|
|
|
The separate fragments are processed by searching the first separator, starting
|
|
|
|
|
at the current buffer address, the separator is then replaced by a 00h byte,
|
|
|
|
|
and the old buffer address is returned to the caller. Moreover, the function
|
|
|
|
|
tries to skip all continously following separators, until reaching a
|
|
|
|
|
non-separator, and does memorize that address for the next call (due to that
|
|
|
|
|
skipping further calls won't return empty fragments, the first call may do so
|
|
|
|
|
though). That skipping seems to be bugged, if list contains two or more
|
|
|
|
|
different characters, then additional separators aren't skipped.<br/>
|
|
|
|
|
```
|
|
|
|
|
",,TEXT,,,END" with list="," returns "", "TEXT", "END"
|
|
|
|
|
",,TEXT,,,END" with list=",." returns "", "", "TEXT", "", "", "END"
|
|
|
|
|
```
|
|
|
|
|
Once when there are no more fragments, then 00000000h is returned.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(24h) - strstr(str, substr) - buggy
|
|
|
|
|
Scans for the first occurence of substr in the string. Returns the memory
|
|
|
|
|
address of that occurence (or 0 if it was unable to find an occurence).<br/>
|
|
|
|
|
BUG: After rejecting incomplete matches, the function doesn't fallback to the
|
|
|
|
|
old str address plus 1, but does rather continue at the current str address.
|
|
|
|
|
Eg. it doesn't find substr="aab" in str="aaab" (in that example, it does merely
|
|
|
|
|
realize that "aab"\<\>"aaa" and then that "aab"\<\>"b").<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Number/String/Character Conversion
|
|
|
|
|
#### A(0Eh) - abs(val)
|
|
|
|
|
#### A(0Fh) - labs(val) ;exactly same as "abs"
|
|
|
|
|
Returns the absolute value (if val\<0 then R2=-val, else R2=val).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(0Ah) - todigit(char)
|
|
|
|
|
Takes the incoming character, ANDed with FFh, and returns 0..9 for characters
|
|
|
|
|
"0..9" and 10..35 for "A..Z" or "a..z", or 0098967Fh (9,999,999 decimal) for
|
|
|
|
|
any other 7bit characters, or garbage for characters 80h..FFh.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(25h) - toupper(char)
|
|
|
|
|
#### A(26h) - tolower(char)
|
|
|
|
|
Returns the incoming character, ANDed with FFh, with letters "A..Z" converted
|
|
|
|
|
to uppercase/lowercase format accordingly. Works only for char 00h..7Fh (some
|
|
|
|
|
characters in range 80h..FFh are left unchanged, others are randomly "adjusted"
|
|
|
|
|
by adding/subtracting 20h, and by sign-expanding the result to 32bits).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(0Dh) - strtol(src, src\_end, base)
|
2020-07-23 20:49:17 +02:00
|
|
|
Converts a string to a number. The function skips any leading "blank"
|
|
|
|
|
characters (that are, 09h..0Dh, and 20h) (ie. TAB, CR, LF, SPC, and some
|
|
|
|
|
others) (some characters in range 80h..FFh are accidently treated as "blank",
|
|
|
|
|
too).<br/>
|
|
|
|
|
The incoming base value should be in range 2..11, although the function does
|
|
|
|
|
also accept the buggy values in range of 12..36 (for values other than 2..36 it
|
|
|
|
|
defaults to decimal/base10). The used numeric digits are "0..9" and "A..Z" (or
|
|
|
|
|
less when base is smaller than 36).<br/>
|
|
|
|
|
The string may have a negative sign prefix "-" (negates the result) (a "+" is
|
|
|
|
|
NOT recognized; and will be treated as the end of the string). Additionally,
|
|
|
|
|
the string may contain prefixes "0b" (binary/base2), "0x" (hex/base16), or "o"
|
|
|
|
|
(octal/base8) (only "o", not "0o"), allowing to override the incoming "base"
|
|
|
|
|
value.<br/>
|
|
|
|
|
BUG: Incoming base values greater than 11 don't work due to the prefix feature
|
|
|
|
|
(eg. base=16 with string "0b11" will be treated as 11 binary, and base=36 with
|
|
|
|
|
string "o55" will be treated as 55 octal) (the only workaround would be to
|
|
|
|
|
add/remove leading "0" characters, ie. "b11" or "00b11" or "0o55" would work
|
|
|
|
|
okay).<br/>
|
|
|
|
|
Finally, the function initializes result=0, and does then process the digits as
|
2020-07-23 22:41:06 +02:00
|
|
|
"result=result\*base+digit" (without any overflow checks) unless/until it
|
2020-07-23 20:49:17 +02:00
|
|
|
reaches an unknown digit (or when digit\>=base) (ie. the string may end with
|
|
|
|
|
00h, or with any other unexpected characters).<br/>
|
|
|
|
|
The function accepts both uppercase and lowercase characters (both as prefixes,
|
|
|
|
|
and as numeric digits). The function returns R2=result, and
|
2020-07-23 22:41:06 +02:00
|
|
|
[src\_end]=end\_address (ie. usually the address of the ending 00h byte; or of
|
2020-07-23 20:49:17 +02:00
|
|
|
any other unexpected end-byte). If src points to 00000000h, then the function
|
2020-07-23 22:41:06 +02:00
|
|
|
returns r2=0, and leaves [src\_end] unchanged.<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(0Ch) - strtoul(src, src\_end, base)
|
2020-07-23 20:49:17 +02:00
|
|
|
Same as "strtol" except that it doesn't recognize the "-" sign prefix (ie.
|
|
|
|
|
works only for unsigned numbers).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(10h) - atoi(src)
|
|
|
|
|
#### A(11h) - atol(src) ;exactly same as "atoi" (but slightly slower)
|
|
|
|
|
Same as "strtol", except that it doesn't return the string end address in
|
2020-07-23 22:41:06 +02:00
|
|
|
[src\_end], and except that it defaults to base=10, but still supports prefixes,
|
2020-07-23 20:49:17 +02:00
|
|
|
allowing to use base2,8,16. CAUTION: For some super bizarre reason, this
|
|
|
|
|
function treats "0" (a leading ZERO digit) as OCTAL prefix (unlike strtol,
|
|
|
|
|
which uses the "o" letter as octal prefix) (the "0x" and "0b" prefixes are
|
|
|
|
|
working as usually).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(12h) - atob(src, num\_dst)
|
|
|
|
|
Calls "strtol(str,src\_end,10)", and does then exchange the two return values
|
|
|
|
|
(ie. sets R2=[src\_end], and [num\_dst]=value\_32bit).<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
|
|
|
|
|
#### A(0Bh) - atof(src) ;USES (ABSENT) COP1 FPU !!!
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(32h) - strtod(src, src\_end) ;USES (ABSENT) COP1 FPU !!!
|
2020-07-23 20:49:17 +02:00
|
|
|
These functions are intended to convert strings to floating point numbers,
|
|
|
|
|
however, the functions are accidently compiled for MIPS processors with COP1
|
|
|
|
|
floating point unit (which is not installed in the PSX, nor does the BIOS
|
|
|
|
|
support a COP1 software emulation), so calling these functions will produce a
|
|
|
|
|
coprocessor exception, causing the PSX to lockup via A(40h)
|
|
|
|
|
SystemErrorUnresolvedException.<br/>
|
|
|
|
|
|
|
|
|
|
#### Note
|
|
|
|
|
On other systems (eg. 8bit computers), "abs/atoi" (integer) and "labs/atol"
|
|
|
|
|
(long) may act differently. However, on the Playstation, both use signed 32bit
|
|
|
|
|
values.<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Misc Functions
|
|
|
|
|
#### A(2Fh) - rand()
|
2020-07-23 22:41:06 +02:00
|
|
|
Advances the random generator as "x=x\*41C64E6Dh+3039h" (aka plus 12345
|
2020-07-23 20:49:17 +02:00
|
|
|
decimal), and returns a 15bit random value "R2=(x/10000h) AND 7FFFh".<br/>
|
|
|
|
|
|
|
|
|
|
#### A(30h) - srand(seed)
|
|
|
|
|
Changes the current 32bit value of the random generator.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(B4h) - GetSystemInfo(index) ;not supported by old CEX-1000 version
|
|
|
|
|
Returns a word, halfword, or string, depending on the selected index value:<br/>
|
|
|
|
|
```
|
|
|
|
|
00h Get Kernel BCD Date (eg. 19951204h) (YYYYMMDDh)
|
|
|
|
|
01h Get Kernel Flags or so (usually/always 000000003h)
|
|
|
|
|
02h Get Kernel Version String (eg. "CEX-3000/1001/1002 by K.S.",0)
|
|
|
|
|
03h Get whatever halfword (usually 0) ;PS2: returns cop0r15
|
|
|
|
|
04h Get whatever halfword (usually 0)
|
|
|
|
|
05h Get RAM Size in kilobytes (usually 2048) ;=[00000060h] SHL 10
|
|
|
|
|
06h..0Eh Get whatever halfwords (usually 0,400h,0,200h,0,0,1,1,1)
|
|
|
|
|
0Fh N/A (returns zero) ;PS2: returns 0000h (effectively = same as zero)
|
|
|
|
|
10h..FFFFFFFFh Not used (returns zero)
|
|
|
|
|
```
|
|
|
|
|
Note: The Date/Version are referring to the Kernel (in the first half of the
|
|
|
|
|
BIOS). The Intro and Bootmenu (in the second half of the BIOS) may have a
|
|
|
|
|
different version, there's no function to retrieve info on that portion,
|
|
|
|
|
however, a version string for it can be usually found at BFC7FF32h (eg. "System
|
|
|
|
|
ROM Version 4.5 05/25/00 E",0) (in many bios versions, the last letter of that
|
|
|
|
|
string indicates the region, but not in all versions) (the old SCPH1000 does
|
|
|
|
|
not include that version string at all).<br/>
|
|
|
|
|
|
|
|
|
|
#### B(56h) GetC0Table()
|
|
|
|
|
#### B(57h) GetB0Table()
|
|
|
|
|
Retrieves the address of the jump lists for B(NNh) and C(NNh) functions,
|
|
|
|
|
allowing to patch entries in that lists (however, the BIOS does often jump
|
|
|
|
|
directly to the function addresses, rather than indirectly via the list, so
|
|
|
|
|
patching may have little effect in such cases). Note: There's no function to
|
|
|
|
|
retrieve the address of the A(NNh) jump list, however, that list is
|
|
|
|
|
usually/always at 00000200h.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(31h) - qsort(base, nel, width, callback)
|
|
|
|
|
Sorts an array, using a super-slow implementation of the "quick sort"
|
|
|
|
|
algorithm. base is the address of the array, nel is the number of elements in
|
|
|
|
|
the array, width is the size in bytes of each element, callback is a function
|
|
|
|
|
that receives pointers to two elements which need to be compared; callback
|
|
|
|
|
should return return zero if the elements are identical, or a positive/negative
|
|
|
|
|
number to indicate which element is bigger.<br/>
|
|
|
|
|
The qsort function rearranges the contents of the array, ie. depending on the
|
|
|
|
|
callback result, it may swap the contents of the two elements, for some bizarre
|
|
|
|
|
reason it doesn't swap them directly, but rather stores one of the elements
|
|
|
|
|
temporarily on the heap (that means, qsort works only if the heap was
|
|
|
|
|
initialized with InitHeap, and only if "width" bytes are free). There's no
|
|
|
|
|
return value.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(35h) - lsearch(key, base, nel, width, callback)
|
|
|
|
|
#### A(36h) - bsearch(key, base, nel, width, callback)
|
|
|
|
|
Searches an element in an array (key is the pointer to the searched element,
|
|
|
|
|
the other parameters are same as for "qsort"). "lsearch" performs a slow linear
|
|
|
|
|
search in an unsorted array, by simply comparing one array element after each
|
|
|
|
|
other. "bsearch" assumes that the array contains sorted elements (eg. via
|
|
|
|
|
qsort), which is allowing to skip some elements, and to jump back and forth in
|
|
|
|
|
the array, until it has found the desired element (or the location where it'd
|
|
|
|
|
be, if it'd be in the array). Both functions return the address of the element
|
|
|
|
|
(or 0 if it wasn't found).<br/>
|
|
|
|
|
|
|
|
|
|
#### C(19h) - ioabort(txt1,txt2)
|
|
|
|
|
Displays the two strings on the TTY (in some cases the BIOS does accidently
|
|
|
|
|
pass garbage instead of the 2nd string though). And does then execute
|
2020-07-23 22:41:06 +02:00
|
|
|
ioabort\_raw(1), see there for more details.<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(B2h) - ioabort\_raw(param) ;not supported by old CEX-1000 version
|
2020-07-23 20:49:17 +02:00
|
|
|
Executes "RestoreState(ioabortbuffer,param)". Internally used to recover from
|
|
|
|
|
failed I/O operations, param should be nonzero to notify the SaveState caller
|
|
|
|
|
that the abort has occurred.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(13h) - SaveState(buf)
|
|
|
|
|
Stores some (not all) CPU registers in the specified buffer (30h bytes):<br/>
|
|
|
|
|
```
|
|
|
|
|
00h 4 r31 (ra) (aka caller's pc)
|
|
|
|
|
04h 4 r29 (sp)
|
|
|
|
|
08h 4 r30 (fp)
|
|
|
|
|
0Ch 4x8 r16..r23
|
|
|
|
|
2Ch 4 r28 (gp)
|
|
|
|
|
```
|
|
|
|
|
That type of buffer can be used with "ioabort", "RestoreState", and also
|
|
|
|
|
"SetCustomExitFromException(addr)".<br/>
|
|
|
|
|
The "SaveState" function (initially) returns 0, however, it may return again -
|
|
|
|
|
to the same return address - with another return value (which should be usually
|
|
|
|
|
non-zero, to indicate that the state has been restored (eg. ioabort passes 1 as
|
|
|
|
|
return value).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(14h) - RestoreState(buf, param)
|
|
|
|
|
Restores the R16-R23,GP,SP,FP,RA registers from a previously recorded SaveState
|
|
|
|
|
buffer, and "returns" to that new RA address (rather than to the caller of the
|
|
|
|
|
RestoreState function), the "param" value is passed as "return value" to the
|
|
|
|
|
code at RA, ie. usually to the caller of the original SaveState call) (since
|
|
|
|
|
SaveState returns 0, "param" should be usually 1, or another non-zero value to
|
|
|
|
|
inidicate that RestoreState has occurred). See SaveState for further details.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(53h) - set\_ioabort\_handler(src) ;PS2 only ;PSX: SystemError
|
2020-07-23 20:49:17 +02:00
|
|
|
Normally the ioabort handler is changed only internally during booting, with
|
|
|
|
|
this new function, games can install their own ioabort handler. src is pointer
|
|
|
|
|
to a 30h-byte "savestate" structure, which will be copied to the actual ioabort
|
|
|
|
|
structure.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(06h) or B(38h) - exit(exitcode)
|
|
|
|
|
Terminates the program and returns control to the BIOS; which does then lockup
|
|
|
|
|
itself via A(3Ah) SystemErrorExit.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(A0h) - WarmBoot()
|
|
|
|
|
Performs a warmboot (resets the kernel and reboots from CDROM). Unlike the
|
|
|
|
|
normal coldboot procedure, it doesn't display the "\<S\>" and "PS" intro
|
|
|
|
|
screens (and doesn't verify the "PS" logo in the ISO System Area), and, doesn't
|
|
|
|
|
enter the bootmenu (even if the disk drive is empty, or if it contains an Audio
|
|
|
|
|
disk). And, it doesn't reload the SYSTEM.CNF file, so the function works only
|
|
|
|
|
if the same disk is still inserted (or another disk with identical SYSTEM.CNF,
|
|
|
|
|
such like Disk 2 of the same game).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(B5h..BFh) B(11h,24h..29h,2Ch..31h,5Eh..FFh) C(1Eh..7Fh) - N/A - Jump 0
|
|
|
|
|
These functions jump to address 00000000h. For whatever reason, that address
|
|
|
|
|
does usually contain a copy of the exception handler (ie. same as at address
|
|
|
|
|
80000080h). However, since there's no return address stored in EPC register,
|
|
|
|
|
the functions will likely crash when returning from the exception handler.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(57h..5Ah,73h..77h,79h..7Bh,7Dh,7Fh..80h,82h..8Fh,B0h..B1h,B3h), and
|
|
|
|
|
#### C(0Eh..11h,14h) - N/A - Returns 0
|
|
|
|
|
No function. Simply returns with r2=00000000h.<br/>
|
|
|
|
|
Reportedly, A(85h) is CdStop, but that seems to be nonsense?<br/>
|
|
|
|
|
|
|
|
|
|
#### SYS(00h) - NoFunction()
|
|
|
|
|
No function. Simply returns without changing any registers or memory locations
|
|
|
|
|
(except that, of course, the exception handler destroys k0).<br/>
|
|
|
|
|
|
|
|
|
|
#### SYS(04h..FFFFFFFFh) - calls DeliverEvent(F0000010h,4000h)
|
|
|
|
|
These are syscalls with invalid function number in R4. For whatever reason that
|
|
|
|
|
is handled by issuing DeliverEvent(F0000010h,4000h). Thereafter, the syscall
|
|
|
|
|
returns to the main program (ie. it doesn't cause a SystemError).<br/>
|
|
|
|
|
|
|
|
|
|
#### A(3Ah) - SystemErrorExit(exitcode)
|
|
|
|
|
#### A(40h) - SystemErrorUnresolvedException()
|
|
|
|
|
#### A(A1h) - SystemErrorBootOrDiskFailure(type,errorcode) ;type "B"=Boot,"D"=Disk
|
|
|
|
|
These are used "SystemError" functions. The functions are repeatedly jumping to
|
|
|
|
|
themselves, causing the system to hang. Possibly useful for debugging software
|
|
|
|
|
which may hook that functions.<br/>
|
|
|
|
|
|
|
|
|
|
#### A(4Fh,50h,52h,53h,9Ah,9Bh) B(1Ah..1Fh,21h..23h,2Ah,2Bh,52h,5Ah) C(0Bh) - N/A
|
|
|
|
|
These are additional "SystemError" functions, but they are never used. The
|
|
|
|
|
functions are repeatedly jumping to themselves, causing the system to hang.<br/>
|
|
|
|
|
Note: A(52h) is reportedly "GetSysSp()", but that seems to be nonsense?<br/>
|
|
|
|
|
|
|
|
|
|
#### BRK(1C00h) - Division by zero (commonly checked/invoked by software)
|
|
|
|
|
#### BRK(1800h) - Division overflow (-80000000h/-1, sometimes checked by software)
|
|
|
|
|
The CPU does not generate any exceptions upon divide overflows, because of
|
|
|
|
|
that, the Kernel code and many games are commonly checking if the divider is
|
|
|
|
|
zero (by software), and, if so, execute a BRK 1C00h opcode. The default BIOS
|
|
|
|
|
exception handler doesn't handle BRK exceptions, and does simply redirect them
|
|
|
|
|
to SystemErrorUnresolvedException().<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Internal Boot Functions
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(45h) - init\_a0\_b0\_c0\_vectors
|
2020-07-23 20:49:17 +02:00
|
|
|
Copies the three default four-opcode handlers for the A(NNh),B(NNh),C(NNh)
|
|
|
|
|
functions to A00000A0h..A00000CFh.<br/>
|
|
|
|
|
|
|
|
|
|
#### C(07h) - InstallExceptionHandlers() ;destroys/uses k0/k1
|
|
|
|
|
Copies the default four-opcode exception handler to the exception vector at
|
|
|
|
|
80000080h..8000008Fh, and, for whatever reason, also copies the same opcodes to
|
|
|
|
|
80000000h..8000000Fh.<br/>
|
|
|
|
|
|
|
|
|
|
#### C(08h) - SysInitMemory(addr,size)
|
|
|
|
|
Initializes the address (A000E000h) and size (2000h) of the allocate-able
|
|
|
|
|
Kernel Memory region, and, seems to deallocate any memory handles which may
|
|
|
|
|
have been allocated via B(00h).<br/>
|
|
|
|
|
|
|
|
|
|
#### C(09h) - SysInitKernelVariables()
|
|
|
|
|
Zerofills all Kernel variables; which are usually at [00007460h..0000891Fh].<br/>
|
|
|
|
|
Note: During the boot process, the BIOS accidently overwrites the first opcode
|
|
|
|
|
of this function (by the last word of the A0h table), so, thereafter, this
|
|
|
|
|
function won't work anymore (nor would it be of any use).<br/>
|
|
|
|
|
|
|
|
|
|
#### C(12h) - InstallDevices(ttyflag)
|
|
|
|
|
Initializes the size and address of the File and Device Control Blocks (FCBs
|
|
|
|
|
and DCBs). Adds the TTY device by calling "KernelRedirect(ttyflag)", and the
|
|
|
|
|
CDROM and Memory Card devices by calling "AddCDROMDevice()" and
|
|
|
|
|
"AddMemCardDevice()".<br/>
|
|
|
|
|
|
|
|
|
|
#### C(1Ch) - AdjustA0Table()
|
|
|
|
|
Copies the B(32h..3Bh) and B(3Ch..3Fh) function addresses to A(00h..09h) and
|
|
|
|
|
A(3Bh..3Eh). Apparently Sony's compiler/linker can't insert the addresses in
|
|
|
|
|
the A0h table directly at compilation time, so this function is used to insert
|
|
|
|
|
them during execution of the boot code.<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS More Internal Functions
|
|
|
|
|
Below are mainly internally used device related subfunctions.<br/>
|
|
|
|
|
|
|
|
|
|
#### Internal Device Stuff
|
|
|
|
|
```
|
|
|
|
|
A(5Bh) dev_tty_init() ;PS2: SystemError
|
|
|
|
|
A(5Ch) dev_tty_open(fcb,and unused:"path\name",accessmode) ;PS2: SystemError
|
|
|
|
|
A(5Dh) dev_tty_in_out(fcb,cmd) ;PS2: SystemError
|
|
|
|
|
A(5Eh) dev_tty_ioctl(fcb,cmd,arg) ;PS2: SystemError
|
|
|
|
|
A(5Fh) dev_cd_open(fcb,"path\name",accessmode)
|
|
|
|
|
A(60h) dev_cd_read(fcb,dst,len)
|
|
|
|
|
A(61h) dev_cd_close(fcb)
|
|
|
|
|
A(62h) dev_cd_firstfile(fcb,"path\name",direntry)
|
|
|
|
|
A(63h) dev_cd_nextfile(fcb,direntry)
|
|
|
|
|
A(64h) dev_cd_chdir(fcb,"path")
|
|
|
|
|
A(65h) dev_card_open(fcb,"path\name",accessmode)
|
|
|
|
|
A(66h) dev_card_read(fcb,dst,len)
|
|
|
|
|
A(67h) dev_card_write(fcb,src,len)
|
|
|
|
|
A(68h) dev_card_close(fcb)
|
|
|
|
|
A(69h) dev_card_firstfile(fcb,"path\name",direntry)
|
|
|
|
|
A(6Ah) dev_card_nextfile(fcb,direntry)
|
|
|
|
|
A(6Bh) dev_card_erase(fcb,"path\name")
|
|
|
|
|
A(6Ch) dev_card_undelete(fcb,"path\name")
|
|
|
|
|
A(6Dh) dev_card_format(fcb)
|
|
|
|
|
A(6Eh) dev_card_rename(fcb1,"path\name1",fcb2,"path\name2")
|
|
|
|
|
A(6Fh) ? ;card ;[r4+18h]=00000000h ;card_clear_error(fcb) or so
|
|
|
|
|
A(96h) AddCDROMDevice()
|
|
|
|
|
A(97h) AddMemCardDevice()
|
|
|
|
|
A(98h) AddDuartTtyDevice() ;PS2: SystemError
|
|
|
|
|
A(99h) AddDummyTtyDevice()
|
|
|
|
|
B(47h) AddDevice(device_info) ;subfunction for AddXxxDevice functions
|
|
|
|
|
B(48h) RemoveDevice(device_name_lowercase)
|
|
|
|
|
B(5Bh) ChangeClearPad(int) ;pad AND card (ie. used also for Card)
|
|
|
|
|
C(15h) tty_cdevinput(circ,char)
|
|
|
|
|
C(16h) tty_cdevscan()
|
|
|
|
|
C(17h) tty_circgetc(circ) ;uses r5 as garbage txt for ioabort
|
|
|
|
|
C(18h) tty_circputc(char,circ)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Device Names
|
|
|
|
|
Device Names are case-sensitive (usually lowercase, eg. "bu" for memory cards).
|
|
|
|
|
In filenames, the device name may be followed by a hexadecimal 32bit
|
|
|
|
|
non-case-sensitive port number (eg. "bu00:" for selecting the first memory card
|
|
|
|
|
slot). Accordingly, the device name should not end with a hexdigit (eg. "usb:"
|
|
|
|
|
would be treated as device "us" with port number 0Bh).<br/>
|
|
|
|
|
Standard device names are "cdrom:", "bu00:", "bu10:", "tty00:". Other,
|
|
|
|
|
nonstandard devices are:<br/>
|
|
|
|
|
```
|
|
|
|
|
Castlevania is trying to access an unknown device named "sim:".
|
|
|
|
|
Caetla (a firmware replacement for Cheat Devices) supports "pcdrv:" device.
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS PC File Server
|
|
|
|
|
#### DTL-H2000
|
|
|
|
|
Below BRK's are internally used in DTL-H2000 BIOS for two devices: "mwin:"
|
|
|
|
|
(Message Window) and "sim:" (CDROM Sim).<br/>
|
|
|
|
|
|
|
|
|
|
#### Caetla Blurb
|
|
|
|
|
Caetla (a firmware replacement for Cheat Devices) supports "pcdrv:" device, the
|
|
|
|
|
SN systems (=what?) device extension to access files on the drive of the pc.
|
|
|
|
|
This fileserver can be accessed by using the kernel functions, with the
|
|
|
|
|
"pcdrv:" device name prefix to the filenames or using the SN system calls.<br/>
|
|
|
|
|
The following SN system calls for the fileserver are provided. Accessed by
|
|
|
|
|
setting the registers and using the break command with the specified field.<br/>
|
|
|
|
|
The break functions have argument(s) in A1,A2,A3 (ie. unlike normal BIOS
|
|
|
|
|
functions not in A0,A1,A2), and TWO return values (in V0, and V1).<br/>
|
|
|
|
|
|
|
|
|
|
#### BRK(101h) - PCInit() - Inits the fileserver
|
|
|
|
|
No parameters.<br/>
|
|
|
|
|
|
|
|
|
|
#### BRK(102h) - PCCreat(filename, fileattributes) - Creates a new file on PC
|
|
|
|
|
```
|
|
|
|
|
out: V0 0 = success, -1 = failure
|
|
|
|
|
V1 file handle or error code if V0 is negative
|
|
|
|
|
```
|
|
|
|
|
Attributes Bits (standard MSDOS-style):<br/>
|
|
|
|
|
```
|
|
|
|
|
bit0 Read only file (R)
|
|
|
|
|
bit1 Hidden file (H)
|
|
|
|
|
bit2 System file (S)
|
|
|
|
|
bit3 Not used (zero)
|
|
|
|
|
bit4 Directory (D)
|
|
|
|
|
bit5 Archive file (A)
|
|
|
|
|
bit6-31 Not used (zero)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### BRK(103h) - PCOpen(filename, accessmode) - Opens a file on the PC
|
|
|
|
|
```
|
|
|
|
|
out: V0 0 = success, -1 = failure
|
|
|
|
|
V1 file handle or error code if V0 is negative
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### BRK(104h) - PCClose(filehandle) - Closes a file on the PC
|
|
|
|
|
```
|
|
|
|
|
out: V0 0 = success, -1 = failure
|
|
|
|
|
V1 0 = success, error code if V0 is negative
|
|
|
|
|
```
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### BRK(105h) - PCRead(filehandle, length, memory\_destination\_address)
|
2020-07-23 20:49:17 +02:00
|
|
|
```
|
|
|
|
|
out: V0 0 = success, -1 = failure
|
|
|
|
|
V1 number of read bytes or error code if V0 is negative.
|
|
|
|
|
```
|
|
|
|
|
Note: PCRead does not stop at EOF, so if you set more bytes to read than the
|
|
|
|
|
filelength, the fileserver will pad with zero bytes. If you are not sure of the
|
|
|
|
|
filelength obtain the filelength by PClSeek (A2=0, A3=2, V1 will return the
|
|
|
|
|
length of the file, don't forget to reset the file pointer to the start before
|
|
|
|
|
calling PCread!)<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### BRK(106h) - PCWrite(filehandle, length, memory\_source\_address)
|
2020-07-23 20:49:17 +02:00
|
|
|
```
|
|
|
|
|
out: V0 0 = success, -1 = failure
|
|
|
|
|
V1 number of written bytes or error code if V0 is negative.
|
|
|
|
|
```
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### BRK(107h) - PClSeek(filehandle, file\_offset, seekmode) - Change Filepos
|
2020-07-23 20:49:17 +02:00
|
|
|
seekmode may be from 0=Begin of file, 1=Current fpos, or 2=End of file.<br/>
|
|
|
|
|
```
|
|
|
|
|
out: V0 0 = success, -1 = failure
|
|
|
|
|
V1 file pointer
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
## BIOS TTY Console (std\_io)
|
2020-07-23 20:49:17 +02:00
|
|
|
#### A(3Fh) - Printf(txt,param1,param2,etc.) - Print string to console
|
|
|
|
|
```
|
|
|
|
|
in: A0 Pointer to 0 terminated string
|
|
|
|
|
A1,A2,A3,[SP+10h..] Argument(s)
|
|
|
|
|
```
|
|
|
|
|
Prints the specified string to the TTY console. Printf does internally use
|
2020-07-23 22:41:06 +02:00
|
|
|
"std\_out\_putchar" to output the separate characters (and expands char 09h and
|
2020-07-23 20:49:17 +02:00
|
|
|
0Ah accordingly).<br/>
|
|
|
|
|
The string can contain C-style escape codes (prefixed by "%" each):<br/>
|
|
|
|
|
```
|
|
|
|
|
c display ASCII character
|
|
|
|
|
s display ASCII string
|
|
|
|
|
i,d,D display signed Decimal number (d/i=default32bit, D=force32bit)
|
|
|
|
|
u,U display unsigned Decimal number (u=default32bit, U=force32bit)
|
|
|
|
|
o,O display unsigned Octal number (o=default32bit, O=force32bit)
|
|
|
|
|
p,x,X display unsigned Hex number (p=lower/force32bit, x=lower, X=upper)
|
|
|
|
|
n write 32bit/16bit string length to [parameter] (default32bit)
|
|
|
|
|
```
|
|
|
|
|
Additionally, following prefixes (inserted between "%" and escape code):<br/>
|
|
|
|
|
```
|
|
|
|
|
+ or SPC show leading plus or space character in positive signed numbers
|
|
|
|
|
NNN fixed width (for padding or so) (first digit must be 1..9) (not 0)
|
|
|
|
|
.NNN fixed width (for clipping or so)
|
|
|
|
|
* variable width (using one of the parameters) (negative=ending_spc)
|
|
|
|
|
.* variable width
|
|
|
|
|
- force ending space padding (in case of width being specified)
|
|
|
|
|
# show leading "0x" or "0X" (hex), or ensure 1 leading zero (octal)
|
|
|
|
|
0 show leading zero's
|
|
|
|
|
L unknown/no effect?
|
|
|
|
|
h,l force 16bit (h=halfword), or 32bit (l=long/word)
|
|
|
|
|
```
|
|
|
|
|
The force32bit codes (D,U,O,p,l) are kinda useless since the PSX defaults to
|
|
|
|
|
32bit parameters anyways. The force16bit code (h) may be useful as "%hn"
|
|
|
|
|
(writeback 16bit value), otherwise it's rather useless, unless signed 16bit
|
|
|
|
|
parameters have garbage in upper 16bit, for unsigned 16bit parameters it
|
|
|
|
|
doesn't work at all (accidently sign-expands 16bit to 32bit, and then displays
|
|
|
|
|
that signed 32bit value as giant unsigned value). Printf supports only octal,
|
|
|
|
|
decimal, and hex (but not binary).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(3Eh) or B(3Fh) std\_out\_puts(src) - Write string to TTY
|
2020-07-23 20:49:17 +02:00
|
|
|
```
|
|
|
|
|
in: R4=address of string (terminated by 00h)
|
|
|
|
|
```
|
|
|
|
|
Like "printf", but doesn't resolve any "%" operands. Empty strings are handled
|
|
|
|
|
in a special way: If R4 points to a 00h character then nothing is output (as
|
|
|
|
|
one would expect it), but, if R4 is 00000000h then "\<NULL\>" is output
|
|
|
|
|
(only that six letters; without appending any CR or LF).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(3Dh) or B(3Eh) std\_in\_gets(dst) - Read string from TTY (keyboard input)
|
2020-07-23 20:49:17 +02:00
|
|
|
```
|
|
|
|
|
in: r4=dst (pointer to a 128-byte buffer) - out: r2=dst (same is incoming r4)
|
|
|
|
|
```
|
2020-07-23 22:41:06 +02:00
|
|
|
Internally uses "std\_in\_getchar" to receive the separate characters (which are
|
2020-07-23 20:49:17 +02:00
|
|
|
thus masked by 7Fh). The received characters are stored in the buffer, and are
|
2020-07-23 22:41:06 +02:00
|
|
|
additionally sent back as echo to the TTY via std\_out\_putc.<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
The following characters are handled in a special way: 09h (TAB) is replaced by
|
|
|
|
|
a single SPC. 08h or 7FH (BS or DEL) are removing the last character from the
|
|
|
|
|
buffer (unless it is empty) and send 08h,20h,08h (BS,SPC,BS) to the TTY. 0Dh or
|
|
|
|
|
0Ah (CR or LF) do terminate the input (append 00h to the buffer, send 0Ah to
|
2020-07-23 22:41:06 +02:00
|
|
|
the TTY, which is expanded to 0Dh,0Ah by the std\_out\_putc function, and do then
|
|
|
|
|
return from the std\_in\_gets function).<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
The sequence 16h,NNh forces NNh to be stored in the buffer (even if NNh is a
|
|
|
|
|
special character like 00h..1Fh or 7Fh). If the buffer is full (circa max 125
|
|
|
|
|
chars, plus one extra byte for the ending 00h), or if an unknown control code
|
|
|
|
|
in range of 00h..1Fh is received without the 16h prefix, then 07h (BELL) is
|
|
|
|
|
sent to the TTY.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(3Bh) or B(3Ch) std\_in\_getchar() - Read character from TTY
|
2020-07-23 20:49:17 +02:00
|
|
|
Reads one character from the TTY console, by internally redirecting to
|
|
|
|
|
"FileRead(0,tempbuf,1)". The returned character is ANDed by 7Fh (so, to read a
|
|
|
|
|
fully intact 8bit character, "FileRead(0,tempbuf,1)" must be used instead of
|
|
|
|
|
this function).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### A(3Ch) or B(3Dh) std\_out\_putchar(char) - Write character to TTY
|
2020-07-23 20:49:17 +02:00
|
|
|
Writes the character to the TTY console, by internally redirecting to
|
|
|
|
|
"FileWrite(1,tempbuf,1)". Char 09h (TAB) is expanded to one or more SPC
|
|
|
|
|
characters, until reaching the next tabulation boundary (every 8 characters).
|
|
|
|
|
Char 0Ah (LF) is expanded to 0Dh,0Ah (CR,LF). Other special characters (which
|
|
|
|
|
should be handled at the remote terminal side) are 08h (BS, backspace, move
|
|
|
|
|
cursor one position to the left), and 07h (BELL, produce a short beep sound).<br/>
|
|
|
|
|
|
|
|
|
|
#### C(13h) FlushStdInOutPut()
|
2020-07-23 22:41:06 +02:00
|
|
|
Closes and re-opens the std\_in (fd=0) and std\_out (fd=1) file handles.<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
|
|
|
|
|
#### C(1Bh) KernelRedirect(ttyflag) ;PS2: ttyflag=1 causes SystemError
|
|
|
|
|
Removes, re-mounts, and flushes the TTY device, the parameter selects whether
|
|
|
|
|
to mount the real DUART-TTY device (r4=1), or a Dummy-TTY device (r4=0), the
|
2020-07-23 22:41:06 +02:00
|
|
|
latter one sends any std\_out to nowhere. Values other than r4=0 or r4=1 do
|
2020-07-23 20:49:17 +02:00
|
|
|
remove the device, but do not re-mount it (which might result in problems).<br/>
|
|
|
|
|
Caution: Trying to use r4=1 on a PSX that does not has the DUART hardware
|
|
|
|
|
installed causes the BIOS to hang (so one should first detect the DUART
|
|
|
|
|
hardware, eg. by writing two different bytes to Port 1F802020h.1st/2nd access,
|
|
|
|
|
and the read and verify that two bytes).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### Activating std\_io
|
|
|
|
|
The std\_io functions can be enabled via C(1Bh) KernelRedirect(ttyflag), the
|
2020-07-23 20:49:17 +02:00
|
|
|
BIOS is unable to detect the presence of the TTY hardware, by default the BIOS
|
2020-07-23 22:41:06 +02:00
|
|
|
bootcode disables std\_io by setting the initial KernelRedirect value at
|
2020-07-23 20:49:17 +02:00
|
|
|
[A000B9B0h] to zero, this is hardcoded shortly after the POST(E) output:<br/>
|
|
|
|
|
```
|
|
|
|
|
call output_post_r4 ;\output POST(E)
|
|
|
|
|
+mov r4,0Eh ;/
|
|
|
|
|
mov r1,0A0010000h ;\set [0A000B9B0h]=0 ;TTY=dummy/off
|
|
|
|
|
call reset_cont_d_3 ; and call reset_cont_d_3
|
|
|
|
|
+mov [r1-4650h],0 ;/
|
|
|
|
|
```
|
|
|
|
|
assuming that R28=A0010FF0h, the last 3 opcodes of above code can be replaced
|
|
|
|
|
by:<br/>
|
|
|
|
|
```
|
|
|
|
|
mov r1,1h ;\set [0A000B9B0h]=1 ;TTY=duart/on
|
|
|
|
|
call reset_cont_d_3 ; and call reset_cont_d_3
|
|
|
|
|
+mov [r28-4650h-0ff0h],r1 ;/
|
|
|
|
|
```
|
|
|
|
|
with that patch, the BIOS bootcode (and many games) are sending debug messages
|
|
|
|
|
to the debug terminal, via expansion port, see:<br/>
|
|
|
|
|
[EXP2 Dual Serial Port (for TTY Debug Terminal)](expansionportpio.md#exp2-dual-serial-port-for-tty-debug-terminal)<br/>
|
|
|
|
|
Note: The nocash BIOS automatically detects the DUART hardware, and activates
|
|
|
|
|
TTY if it is present.<br/>
|
|
|
|
|
|
|
|
|
|
#### B(49h) PrintInstalledDevices()
|
|
|
|
|
Uses printf to display the long and short names from the DCB of the currently
|
|
|
|
|
installed devices. Doesn't do anything else. There's no return value.<br/>
|
|
|
|
|
|
|
|
|
|
#### Note
|
|
|
|
|
Several BIOS functions are internally using printf to output status
|
|
|
|
|
information, timeout, and error messages, etc. So, trying to close the TTY file
|
|
|
|
|
handles (fd=0 and fd=1) would cause such functions to work unstable.<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Character Sets
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(51h) Krom2RawAdd(shiftjis\_code)
|
2020-07-23 20:49:17 +02:00
|
|
|
```
|
|
|
|
|
In: r4 = 16bit Shift-JIS character code
|
|
|
|
|
Out: r2 = address in BIOS ROM of the desired character (or -1 = error)
|
|
|
|
|
```
|
|
|
|
|
r4 should be 8140h..84BEh (charset 2), or 889Fh..9872h (charset 3).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### B(53h) Krom2Offset(shiftjis\_code)
|
2020-07-23 20:49:17 +02:00
|
|
|
```
|
|
|
|
|
In: r4 = 16bit Shift-JIS character code
|
|
|
|
|
Out: r2 = offset within charset (without charset base address)
|
|
|
|
|
```
|
2020-07-23 22:41:06 +02:00
|
|
|
This is a subfunction for B(51h) Krom2RawAdd(shiftjis\_code).<br/>
|
2020-07-23 20:49:17 +02:00
|
|
|
|
|
|
|
|
#### Character Sets in ROM (112Kbytes)
|
|
|
|
|
The character sets are located at BFC64000h and up, intermixed with some other
|
|
|
|
|
stuff:<br/>
|
|
|
|
|
```
|
|
|
|
|
BFC64000h Charset 1 (16x15 pix, letters with accent marks) (NOT in JAPAN)
|
|
|
|
|
BFC65CB6h Garbage (four-and-a-half reverb tables, ioports, printf strings)
|
|
|
|
|
BFC66000h Charset 2 (16x15 pix, various alphabets, english, greek, etc.)
|
|
|
|
|
BFC69D68h Charset 3 (16x15 pix, japanese or chinese symbols or so)
|
|
|
|
|
BFC7F8DEh Charset 4 (8x15 pix, mainly ASCII letters)
|
|
|
|
|
BFC7FE6Fh Charset 5 (8x15 pix, additional punctuation marks) (NOT in PS2)
|
|
|
|
|
BFC7FF32h Version (Version and Copyright strings) (NOT in SCPH1000)
|
|
|
|
|
BFC7FF8Ch Charset 6 (8x15 pix, seven-and-a-half japanese chars) (NOT in PS2)
|
|
|
|
|
BFC80000h End (End of 512kBYTE BIOS ROM)
|
|
|
|
|
```
|
|
|
|
|
Charset 1 (and Garbage) is NOT included in japanese BIOSes (in the SCPH1000
|
|
|
|
|
version that region contains uncompressed program code, in newer japanese
|
|
|
|
|
BIOSes that regions are zerofilled)<br/>
|
|
|
|
|
Charset 1 symbols are as defined in JIS-X-0212 char(2661h..2B77h), and EUC-JP
|
|
|
|
|
char(8FA6E0h..8FABF7h).<br/>
|
|
|
|
|
Version (and Copyright) string is NOT included in SCPH1000 version (that BIOS
|
|
|
|
|
includes further japanese 8x15 pix chars in that region).<br/>
|
|
|
|
|
For charset 2 and 3 it may be recommended to use the B(51h)
|
2020-07-23 22:41:06 +02:00
|
|
|
Krom2RawAdd(shiftjis\_code) to obtain the character addresses. Not sure if that
|
2020-07-23 20:49:17 +02:00
|
|
|
BIOS function (or another BIOS function) allows to retrieve charset 1, 4, 5,
|
|
|
|
|
and 6 addresses?<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Control Blocks
|
|
|
|
|
#### Exception Control Blocks (ExCB) (4 blocks of 8 bytes each)
|
|
|
|
|
```
|
|
|
|
|
00h 4 ptr to first element of exception chain
|
|
|
|
|
04h 4 not used (zero)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Event Control Blocks (EvCB) (usually 16 blocks of 1Ch bytes each)
|
|
|
|
|
```
|
|
|
|
|
00h 4 class (events are triggered when class and spec match)
|
|
|
|
|
04h 4 status (0=free,1000h=disabled,2000h=enabled/busy,4000h=enabled/ready)
|
|
|
|
|
08h 4 spec (events are triggered when class and spec match)
|
|
|
|
|
0Ch 4 mode (1000h=execute function/stay busy, 2000h=no func/mark ready)
|
|
|
|
|
10h 4 ptr to function to be executed when ready (or 0=none)
|
|
|
|
|
14h 8 not used (uninitialized)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Thread Control Blocks (TCB) (usually 4 blocks of 0C0h bytes each)
|
|
|
|
|
```
|
|
|
|
|
00h 4 status (1000h=Free TCB, 4000h=Used TCB)
|
|
|
|
|
04h 4 not used (set to 1000h by OpenThread) (not for boot executable?)
|
|
|
|
|
08h 80h r0..r31 (entries for r0/zero and r26/k0 are unused)
|
|
|
|
|
88h 4 cop0r14/epc (aka r26/k0 and pc when returning from exception)
|
|
|
|
|
8Ch 8 hi,lo (the mul/div registers)
|
|
|
|
|
94h 4 cop0r12/sr (stored/restored by exception, NOT init by OpenThread)
|
|
|
|
|
98h 4 cop0r13/cause (stored when entering exception, NOT restored on exit)
|
|
|
|
|
9Ch 24h not used (uninitialized)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Process Control Block (1 block of 4 bytes)
|
|
|
|
|
```
|
|
|
|
|
00h 4 ptr to TCB of current thread
|
|
|
|
|
```
|
|
|
|
|
The PSX supports only one process, and thus only one Process Control Block.<br/>
|
|
|
|
|
|
|
|
|
|
#### File Control Blocks (FCB) (16 blocks of 2Ch bytes each)
|
|
|
|
|
```
|
|
|
|
|
00h 4 status (0=Free FCB) (nonzero=accessmode)
|
|
|
|
|
04h 4 cdrom: disk_id (checksum across path table of the corresponding disk),
|
|
|
|
|
memory card: port number (00h=slot1, 10h=slot2)
|
|
|
|
|
08h 4 transfer address (for dev_in_out function)
|
|
|
|
|
0Ch 4 transfer length (for dev_in_out function)
|
|
|
|
|
10h 4 current file position
|
|
|
|
|
14h 4 device flags (copy of DCB[04h])
|
|
|
|
|
18h 4 error ;used by B(55h) - GetLastFileError(fd)
|
|
|
|
|
1Ch 4 Pointer to DCB for the file
|
|
|
|
|
20h 4 filesize
|
|
|
|
|
24h 4 logical block number (start of file) (for cdrom: at least)
|
|
|
|
|
28h 4 file control block number (simply 0..15 for FCB number 0..15)
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Device Control Blocks (DCB) (10 blocks of 50h bytes each)
|
|
|
|
|
```
|
|
|
|
|
00h 4 ptr to lower-case short name ("cdrom", "bu", "tty") (or 0=Free DCB)
|
|
|
|
|
04h 4 device flags (cdrom=14h, bu=14h, tty/dummy=1, tty/duart=3)
|
|
|
|
|
08h 4 sector size (cdrom=800h, bu=80h, tty=1)
|
|
|
|
|
0Ch 4 ptr to upper-case long name ("CD-ROM", "MEMORY CARD", "CONSOLE")
|
|
|
|
|
10h 4 ptr to init() (TTY only)
|
|
|
|
|
14h 4 ptr to open(fcb,"path\name",accessmode)
|
|
|
|
|
18h 4 ptr to in_out(fcb,cmd) (TTY only)
|
|
|
|
|
1Ch 4 ptr to close(fcb)
|
|
|
|
|
20h 4 ptr to ioctl(fcb,cmd,arg) (TTY only)
|
|
|
|
|
24h 4 ptr to read(fcb,dst,len)
|
|
|
|
|
28h 4 ptr to write(fcb,src,len)
|
|
|
|
|
2Ch 4 ptr to erase(fcb,"path\name")
|
|
|
|
|
30h 4 ptr to undelete(fcb,"path\name")
|
|
|
|
|
34h 4 ptr to firstfile(fcb,"path\name",direntry)
|
|
|
|
|
38h 4 ptr to nextfile(fcb,direntry)
|
|
|
|
|
3Ch 4 ptr to format(fcb)
|
|
|
|
|
40h 4 ptr to chdir(fcb,"path") (CDROM only)
|
|
|
|
|
44h 4 ptr to rename(fcb1,"path\name1",fcb2,"path\name2")
|
|
|
|
|
48h 4 ptr to remove()
|
|
|
|
|
4Ch 4 ptr to testdevice(fcb,"path\name")
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Versions
|
|
|
|
|
#### Kernel Versions
|
|
|
|
|
For the actual kernel, there seem to be only a few different versions. Most
|
|
|
|
|
PSX/PSone's are containing the version from 1995 (which is kept 1:1 the same in
|
|
|
|
|
all consoles; without any PAL/NTSC related customizations).<br/>
|
|
|
|
|
```
|
|
|
|
|
28-Jul-1994 "DTL-H2000" ;v0.x (pre-retail devboard)
|
|
|
|
|
22-Sep-1994 "CEX-1000 KT-3 by S.O." ;v1.0 through v2.0
|
|
|
|
|
no-new-date "CEX-3000 KT-3 by K.S." ;v2.1 only (old Port 1F801060h)
|
|
|
|
|
04-Dec-1995 "CEX-3000/1001/1002 by K.S." ;v2.2 through v4.5 (except v4.0)
|
|
|
|
|
29-May-1997 "CEX-7000/-7001 by K.S. " ;v4.0 only (new Port 1F801010h)
|
|
|
|
|
17-Jan-2000 "PS compatible mode by M.T." ;v5.0 (Playstation 2)
|
|
|
|
|
```
|
|
|
|
|
The date and version string can be retrieved via GetSystemInfo(index).<br/>
|
|
|
|
|
The "CEX-7000/-7001" version was only "temporarily" used (when the kernel/gui
|
|
|
|
|
grew too large they changed the ROM size from 512K to 1024K; but did then
|
|
|
|
|
figure out that they could use a self-decompressing GUI to squeeze everything
|
|
|
|
|
into 512K; but they did accidentally still use the 1024K setting) (newer
|
|
|
|
|
consoles fixed that and switched back to the old version from 1995) (aside from
|
|
|
|
|
the different date/version string, the only changed thing is the opcode at
|
|
|
|
|
BFC00000h, which initializes port 1F801010h to BIOS ROM size of 1MB, instead of
|
|
|
|
|
512KB; no idea if that BIOS does actually contain additional data?).<br/>
|
|
|
|
|
The "CEX-3000 KT-3" version is already almost same as "CEX-3000/1001/1002",
|
|
|
|
|
aside from version/date, the only differences are at offset BFC00014h..1Fh, and
|
|
|
|
|
BFC003E0h (both related to Port 1F801060h).<br/>
|
|
|
|
|
|
|
|
|
|
#### Bootmenu/Intro Versions
|
|
|
|
|
This portion was updated more often. It's customized for PAL/NTSC displays,
|
|
|
|
|
japanese/english language, and (maybe?) region/licence string checks. The
|
|
|
|
|
SCPH1000 uses uncompressed Bootmenu/Intro code with "\<S\>" intro, but
|
|
|
|
|
without "PS" intro (or, "PS" is shown only on region matches?), newer versions
|
|
|
|
|
are using selfdecompressing code, with both intro screens. The GUI in older PSX
|
|
|
|
|
models looks like a drawing program for children, the GUI in newer PSX models
|
|
|
|
|
and in PSone's looks more like a modernized bathroom furniture, unknown how the
|
|
|
|
|
PS2 GUI looks like?<br/>
|
|
|
|
|
Games are communicating only with the Kernel, so the differences in the
|
|
|
|
|
Bootmenu/Intro part should have little or effect on compatibility (although
|
|
|
|
|
some I/O ports might be initialized differently, and although some games might
|
|
|
|
|
(accidently) read different (garbage) values from the ROM).<br/>
|
|
|
|
|
```
|
|
|
|
|
Ver CRC32 Used in System ROM Version Kernel
|
|
|
|
|
0.xj 18D0F7D8 DTL-H2000 (no version string) dtlh2000
|
|
|
|
|
1.0j 3B601FC8 SCPH-1000 and DTL-H1000 (no version string) cex1000
|
|
|
|
|
1.1j 3539DEF6 SCPH-3000 and DTL-H1000H "1.1 01/22/95" ""
|
|
|
|
|
2.0a 55847D8C DTL-H1001 "2.0 05/07/95 A" ""
|
|
|
|
|
2.0e 9BB87C4B SCPH-1002 and DTL-H1002 "2.0 05/10/95 E" ""
|
|
|
|
|
2.1j BC190209 SCPH-3500 "2.1 07/17/95 J" cex3000
|
|
|
|
|
2.1a AFF00F2F SCPH-1001 and DTL-H1101 "2.1 07/17/95 A" ""
|
|
|
|
|
2.1e 86C30531 SCPH-1002 and DTL-H1102 "2.1 07/17/95 E" ""
|
|
|
|
|
2.2j 24FC7E17 SCPH-5000 and DTL-H1200 "2.2 12/04/95 J" cex3000/100x
|
|
|
|
|
2.2a 37157331 SCPH-1001 and DTL-H1201/3001 "2.2 12/04/95 A" ""
|
|
|
|
|
2.2e 1E26792F SCPH-1002 and DTL-H1202/3002 "2.2 12/04/95 E" ""
|
|
|
|
|
2.2v 446EC5B2 SCPH-5903 (VCD, 1Mbyte) "2.2 12/04/95 J" ""
|
|
|
|
|
2.2d DECB22F5 DTL-H1100 "2.2 03/06/96 D" ""
|
|
|
|
|
3.0j FF3EEB8C SCPH-5500 "3.0 09/09/96 J" ""
|
|
|
|
|
3.0a 8D8CB7E4 SCPH-5501/7003 "3.0 11/18/96 A" ""
|
|
|
|
|
3.0e D786F0B9 SCPH-5502/5552 "3.0 01/06/97 E" ""
|
|
|
|
|
4.0j EC541CD0 SCPH-7000/9000 "4.0 08/18/97 J" cex7000
|
|
|
|
|
4.1w B7C43DAD SCPH-7000W ...XXX...
|
|
|
|
|
4.1a 502224B6 SCPH-7001/7501/7503/9001 "4.1 12/16/97 A" cex3000/100x
|
|
|
|
|
4.1e 318178BF SCPH-7002/7502/9002 "4.1 12/16/97 E" ""
|
|
|
|
|
4.3j F2AF798B SCPH-100 (PSone) "4.3 03/11/00 J" ""
|
|
|
|
|
4.4a 6A0E22A0 SCPH-101 (PSone) "4.4 03/24/00 ..XXX..
|
|
|
|
|
4.4e 0BAD7EA9 SCPH-102 (PSone) "4.4 03/24/00 E" ""
|
|
|
|
|
4.5a 171BDCEC SCPH-101 (PSone) "4.5 05/25/00 A" ""
|
|
|
|
|
4.5e 76B880E5 SCPH-102 (PSone) "4.5 05/25/00 E" ""
|
|
|
|
|
5.0t B7EF81A9 SCPH10000 (Playstation 2) "5.0 01/17/00 T" PS compatible
|
|
|
|
|
```
|
|
|
|
|
The System ROM Version string can be found at BFC7FF32h (except in v1.0).<br/>
|
|
|
|
|
|
|
|
|
|
v2.2j/a/e use exactly the same GUI as v2.1 (only the kernel was changed). v2.2d
|
|
|
|
|
is almost same as v2.2j (but with some GUI patches or so).<br/>
|
|
|
|
|
v4.1 and v4.5 use exactly the same GUI code for "A" and "E" regions (the only
|
|
|
|
|
difference is the last byte of the version string; which does specify whether
|
|
|
|
|
the GUI shall use PAL or NTSC).<br/>
|
|
|
|
|
v5.0 is playstation 2 bios (4MB) with more or less backwards compatible kernel.<br/>
|
|
|
|
|
|
|
|
|
|
#### Character Set Versions
|
|
|
|
|
The 16x15 pixel charsets at BFC66000h and BFC69D68h are included in all BIOSes,
|
|
|
|
|
however, the 16x15 portion for letters with accent marks at BFC64000h is
|
|
|
|
|
included only in non-japanese BIOSes, and in some newer japanese BIOSes (not
|
|
|
|
|
included in v4.0j, but they are included in v4.3j).<br/>
|
|
|
|
|
The 8x15 pixel charset with characters 21h..7Fh is included in all BIOSes. In
|
|
|
|
|
the SCPH1000, this region is followed by additional 8x15 punctuation marks at
|
|
|
|
|
char 80h and up, however, this region is missing in PS2 BIOS. Moreover, some
|
|
|
|
|
BIOSes include an incomplete 8x15 japanese character set (which ends abruptly
|
|
|
|
|
at BF7FFFFFh), in newer BIOSes, some of theses chars are replaced by the
|
|
|
|
|
version string at BFC7FF32h, and, the remaining 8x15 japanese chars were
|
|
|
|
|
removed in the PS2 BIOS version.<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## BIOS Patches
|
|
|
|
|
The original PSX Kernel mainly consists of messy and unstable compiler
|
|
|
|
|
generated code, and, to the worst, the \<same\> author seems to have
|
|
|
|
|
attempted to use assembler code in some places. In result, most commercial
|
|
|
|
|
games are causing a greater mess by inserting patches in the kernel code...<br/>
|
|
|
|
|
Which has been a nasty surprise when making the nocash PSX bios; which
|
|
|
|
|
obviously wasn't compatible with these patches. The only solutions would have
|
|
|
|
|
been to insert hundreds of NOPs to make my bios \<exactly\> as bloated as
|
|
|
|
|
the original bios (which I really didn't want to do), or to create
|
|
|
|
|
anti-patch-patches.<br/>
|
|
|
|
|
|
|
|
|
|
#### Patches and Anti-Patch-Patches
|
|
|
|
|
As shown below, all known patches are invoked by a B(56h) or B(57h) function
|
|
|
|
|
call. In the nocash PSX bios, these two functions are examining the following
|
|
|
|
|
opcodes, if the opcodes are a known patch, then the BIOS reproduces the desired
|
|
|
|
|
behaviour, and does then continue normal execution after those opcodes. If the
|
|
|
|
|
opcodes are unknown, then the BIOS simply locks up; and shows an error message
|
|
|
|
|
with the address of that opcodes in the TTY window; info about any such unknown
|
|
|
|
|
opcodes would be welcome!<br/>
|
|
|
|
|
|
|
|
|
|
#### Compatibility
|
|
|
|
|
If you want to (or need to) use patches, please use byte-identical opcodes as
|
|
|
|
|
commercial games do (as shown below; only the "xxxx" address digits are don't
|
|
|
|
|
care), so the nocash PSX bios (or other homebrewn BIOSes) can detect and
|
|
|
|
|
reproduce them. Or alternately, don't use the BIOS, and access I/O ports
|
|
|
|
|
directly, which is much better and faster anyways.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### patch\_missing\_cop0r13\_in\_exception\_handler:
|
2020-07-23 20:49:17 +02:00
|
|
|
In newer Kernel version, the exception handler reads cop0r13/cause to r2,
|
|
|
|
|
examines the Excode value in r2, and if the exception was caused by an
|
|
|
|
|
interrupt, and if the next opcode (at EPC) is a GTE/COP2 command, then it does
|
|
|
|
|
increment EPC by 4. The GTE commands are executed even if an interrupt occurs
|
|
|
|
|
simultaneously, so, without adjusting EPC, the command would be executed twice.
|
|
|
|
|
With some commands that'd just waste some clock cycles, with other commands it
|
|
|
|
|
may cause data to be written twice to the GTE FIFOs, or may re-use the result
|
|
|
|
|
from the 1st command execution as input to the 2nd execution.<br/>
|
|
|
|
|
The old "CEX-1000 KT-3" Kernel version did examine r2, but it "forgot" to
|
|
|
|
|
previously load cop0r13 to r2, so it did randomly examine a garbage value. The
|
|
|
|
|
patch inserts the missing opcode, used in elo2 at 80033740h, and in Pandemonium
|
|
|
|
|
II at 8007F3FCh:<br/>
|
|
|
|
|
```
|
|
|
|
|
240A00B0 mov r10,0B0h ;\ 00000000 nop
|
|
|
|
|
0140F809 call r10 ; 00000000 nop
|
|
|
|
|
24090056 +mov r9,56h ;/ 241A0100 mov k0,100h
|
|
|
|
|
3C0Axxxx mov r10,xxxx0000h ;\ 8F5A0008 mov k0,[k0+8h]
|
|
|
|
|
3C09xxxx mov r9,xxxx0000h ; 00000000 nop
|
|
|
|
|
8C420018 mov r2,[r2+06h*4] ;=C(06h) ; 8F5A0000 mov k0,[k0]
|
|
|
|
|
254Axxxx add r10,xxxxh ;=@@new_data ; 00000000 nop
|
|
|
|
|
2529xxxx add r9,xxxxh ;=@@new_data_end ;/ 235A0008 addt k0,8h
|
|
|
|
|
@@copy_lop: ;\ AF410004 mov [k0+4h],r1
|
|
|
|
|
8D430000 mov r3,[r10] ; AF420008 mov [k0+8h],r2
|
|
|
|
|
254A0004 add r10,4h ; AF43000C mov [k0+0Ch],r3
|
|
|
|
|
24420004 add r2,4h ; AF5F007C mov [k0+7Ch],ra
|
|
|
|
|
1549FFFC jne r10,r9,@@copy_lop ; 40026800 mov r2,cop0r13
|
|
|
|
|
AC43FFFC +mov [r2-4h],r3 ;/ 00000000 nop
|
|
|
|
|
```
|
|
|
|
|
Alternately, same as above, but using k0/k1 instead of r10/r9, used in Ridge
|
|
|
|
|
Racer at 80047B14h:<br/>
|
|
|
|
|
```
|
|
|
|
|
240A00B0 mov r10,0B0h ;\ 00000000 nop
|
|
|
|
|
0140F809 call r10 ; 00000000 nop
|
|
|
|
|
24090056 +mov r9,56h ;/ 241A0100 mov k0,100h
|
|
|
|
|
3C1Axxxx mov k0,xxxx0000h ;\ 8F5A0008 mov k0,[k0+8h]
|
|
|
|
|
3C1Bxxxx mov k1,xxxx0000h ; 00000000 nop
|
|
|
|
|
8C420018 mov r2,[r2+06h*4] ;=C(06h) ; 8F5A0000 mov k0,[k0]
|
|
|
|
|
275Axxxx add k0,xxxxh ;=@@new_data ; 00000000 nop
|
|
|
|
|
277Bxxxx add k1,xxxxh ;=@@new_data_end ;/ 235A0008 addt k0,8h
|
|
|
|
|
@@copy_lop: ;\ AF410004 mov [k0+4h],r1
|
|
|
|
|
8F430000 mov r3,[k0] ; AF420008 mov [k0+8h],r2
|
|
|
|
|
275A0004 add k0,4h ; AF43000C mov [k0+0Ch],r3
|
|
|
|
|
24420004 add r2,4h ; AF5F007C mov [k0+7Ch],ra
|
|
|
|
|
175BFFFC jne k0,k1,@@copy_lop ; 40026800 mov r2,cop0r13
|
|
|
|
|
AC43FFFC +mov [r2-4h],r3 ;/ 00000000 nop
|
|
|
|
|
```
|
2020-07-23 22:41:06 +02:00
|
|
|
Alternately, slightly different code used in metal\_gear\_solid at 80095CC0h, and
|
2020-07-23 20:49:17 +02:00
|
|
|
in alone1 at 800A3ECCh:<br/>
|
|
|
|
|
```
|
|
|
|
|
24090056 mov r9,56h ;\
|
|
|
|
|
240A00B0 mov r10,0B0h ; B(56h) GetC0Table
|
|
|
|
|
0140F809 call r10 ;
|
|
|
|
|
00000000 +nop ;/
|
|
|
|
|
8C420018 mov r2,[r2+06h*4] ;=00000C80h = exception_handler = C(06h)
|
|
|
|
|
00000000 nop
|
|
|
|
|
24420028 add r2,28h
|
|
|
|
|
00407821 mov r15,r2
|
|
|
|
|
3C0Axxxx lui r10,xxxxh ;\@@ori_data ;\
|
|
|
|
|
254Axxxx add r10,xxxxh ;/ ;
|
|
|
|
|
3C09xxxx lui r9,xxxxh ;\@@ori_data_end ; @@ori_data:
|
|
|
|
|
2529xxxx add r9,xxxxh ;/ ; AF410004 mov [k0+4h],r1
|
|
|
|
|
@@verify_lop: ; AF420008 mov [k0+8h],r2
|
|
|
|
|
8D430000 mov r3,[r10] ; AF43000C mov [k0+0Ch],r3
|
|
|
|
|
8C4B0000 mov r11,[r2] ; AF5F007C mov [k0+7Ch],ra
|
|
|
|
|
254A0004 add r10,4h ; 40037000 mov r3,cop0r14
|
|
|
|
|
146B000E jne r3,r11,@@verify_mismatch ; 00000000 nop
|
|
|
|
|
24420004 +add r2,4h ;
|
|
|
|
|
1549FFFA jne r10,r9,@@verify_lop ;
|
|
|
|
|
00000000 +nop ;/
|
|
|
|
|
01E01021 mov r2,r15
|
|
|
|
|
3C0Axxxx lui r10,xxxxh ;\@@new_data ;\
|
|
|
|
|
254Axxxx add r10,xxxxh ;/ ;
|
|
|
|
|
3C09xxxx lui r9,xxxxh ;\@@new_data_end ; @@new_data:
|
|
|
|
|
2529xxxx add r9,xxxxh ;/ ; AF410004 mov [k0+4h],r1
|
|
|
|
|
@@copy_lop: ; AF420008 mov [k0+8h],r2
|
|
|
|
|
8D430000 mov r3,[r10] ; 40026800 mov r2,cop0r13
|
|
|
|
|
00000000 nop ; AF43000C mov [k0+0Ch],r3
|
|
|
|
|
AC430000 mov [r2],r3 ; 40037000 mov r3,cop0r14
|
|
|
|
|
254A0004 add r10,4h ; AF5F007C mov [k0+7Ch],ra
|
|
|
|
|
1549FFFB jne r10,r9,@@copy_lop ;
|
|
|
|
|
24420004 +add r2,4h ;/
|
|
|
|
|
@@verify_mismatch:
|
|
|
|
|
```
|
|
|
|
|
Alternately, a bugged/nonfunctional homebrew variant (used by Hitmen's
|
|
|
|
|
"minimum" demo):<br/>
|
|
|
|
|
```
|
|
|
|
|
;BUG1: 8bit "movb r6" should be 32bit "mov r6"
|
|
|
|
|
;BUG2: @@copy_lop should transfer 6 words (not 7 words)
|
|
|
|
|
;BUG3: and, asides, the minimum demo works only with PAL BIOS (not NTSC)
|
|
|
|
|
0xxxxxxx call xxxxxxxxh ;\B(56h) GetC0Table
|
|
|
|
|
00000000 +nop ;/(mov r8,0B0h, jmp r8, +mov r9,56h)
|
|
|
|
|
3C04xxxx mov r4,xxxx0000h ;\@@ori_data
|
|
|
|
|
2484xxxx add r4,xxxxh ;/
|
|
|
|
|
90460018 movb r6,[r2+06h*4] ;BUG1 ;exception_handler = C(06h)
|
|
|
|
|
24870018 add r7,r4,18h ;@@ori_end ;\
|
|
|
|
|
24C50028 add r5,r6,28h ;C(06h)+28h ;
|
|
|
|
|
00A03021 mov r6,r5 ; @@ori_data:
|
|
|
|
|
@@verify_lop: ; 80086520 AF410004 mov [k0+4h],r1
|
|
|
|
|
8CA30000 mov r3,[r5] ; 80086524 AF420008 mov [k0+8h],r2
|
|
|
|
|
8C820000 mov r2,[r4] ; 80086528 AF43000C mov [k0+0Ch],r3
|
|
|
|
|
00000000 nop ; 8008652C AF5F007C mov [k0+7Ch],ra
|
|
|
|
|
1462000C jne r3,r2,@@verify_mismatch ; 80086530 40037000 mov r3,cop0r14
|
|
|
|
|
24840004 +add r4,4h ; 80086534 00000000 nop
|
|
|
|
|
1487FFFA jne r4,r7,@@verify_lop ; @@ori_end:
|
|
|
|
|
24A50004 +add r5,4h ;/
|
|
|
|
|
00C02821 mov r5,r6 ;\ @@new_data:
|
|
|
|
|
3C04xxxx mov r4,xxxx0000h ;\@@new_data; 80086538 AF410004 mov [k0+4h],r1
|
|
|
|
|
2484xxxx add r4,xxxxh ;/ ; 8008653C AF420008 mov [k0+8h],r2
|
|
|
|
|
2483001C add r3,r4,1Ch ;@@bugged_end ; 80086540 40026800 mov r2,cop0r13
|
|
|
|
|
@@copy_lop: ; 80086544 AF43000C mov [k0+0Ch],r3
|
|
|
|
|
8C820000 mov r2,[r4] ; 80086548 40037000 mov r3,cop0r14
|
|
|
|
|
24840004 add r4,4h ; 8008654C AF5F007C mov [k0+7Ch],ra
|
|
|
|
|
ACA20000 mov [r5],r2 ; @@new_end:
|
|
|
|
|
1483FFFC jne r4,r3,@@copy_lop ; 80086550 00000000 nop ;BUG2
|
|
|
|
|
24A50004 +add r5,4h ;/ @@bugged_end:
|
|
|
|
|
@@verify_mismatch:
|
|
|
|
|
```
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### early\_card\_irq\_patch:
|
2020-07-23 20:49:17 +02:00
|
|
|
Because of a hardware glitch the card IRQ cannot be acknowledged while the
|
|
|
|
|
external IRQ signal is still LOW, making it neccessary to insert a delay that
|
|
|
|
|
waits until the signal gets HIGH before acknowledging the IRQ.<br/>
|
|
|
|
|
The original BIOS is so inefficient that it takes hundreds of clock cycles
|
|
|
|
|
between the interrupt request and the IRQ acknowledge, so, normally, it doesn't
|
|
|
|
|
require an additional delay.<br/>
|
|
|
|
|
However, the central mistake in the IRQ handler is that it doesn't memorize
|
|
|
|
|
which IRQ has originally triggered the interrupt. For example, it may get
|
|
|
|
|
triggered by a timer IRQ, but a newer card IRQ may occur during IRQ handling,
|
|
|
|
|
in that case, the card IRQ may get processed and acknowledged without the
|
|
|
|
|
required delay.<br/>
|
|
|
|
|
Used in Metal Gear Solid at 8009AA5Ch, and in alone1 at 800AE2F8h:<br/>
|
|
|
|
|
```
|
|
|
|
|
24090056 mov r9,56h ;\ ; @@new_data:
|
|
|
|
|
240A00B0 mov r10,0B0h ; B(56h) GetC0Table ;3C02A001 lui r2,0A001h
|
|
|
|
|
0140F809 call r10 ; ;2442DFAC sub r2,2054h
|
|
|
|
|
00000000 +nop ;/ ;00400008 jmp r2 ;=@@new_cont_d
|
|
|
|
|
8C420018 mov r2,[r2+06h*4] ;\get C(06h) ;00000000 +nop ;=A000DFACh
|
|
|
|
|
00000000 nop ;/ ;00000000 nop
|
|
|
|
|
8C430070 mov r3,[r2+70h] ;\ ; @@new_data_end:
|
|
|
|
|
00000000 nop ; get ; @@new_cont_d:
|
|
|
|
|
3069FFFF and r9,r3,0FFFFh ; early_card ;8C621074 mov r2,[r3+1074h]
|
|
|
|
|
00094C00 shl r9,10h ; irq_handler ;00000000 nop
|
|
|
|
|
8C430074 mov r3,[r2+74h] ; ;30420080 and r2,80h ;I_STAT.7
|
|
|
|
|
00000000 nop ; ;1040000B jz r2,@@ret
|
|
|
|
|
306AFFFF and r10,r3,0FFFFh ;/ ;00000000 +nop
|
|
|
|
|
012A1821 add r3,r9,r10 ; @@wait_lop:
|
|
|
|
|
24620028 add r2,r3,28h ;=early+28h ;8C621044 mov r2,[r3+1044h]
|
|
|
|
|
3C0Axxxx lui r10,xxxxh ;\@@new_data ;00000000 nop
|
|
|
|
|
254Axxxx sub r10,xxxxh ;/ ;30420080 and r2,80h ;JOY_STAT.7
|
|
|
|
|
3C09xxxx lui r9,xxxxh ;\@@new_data_end ;1440FFFC jnz r2,@@wait_lop
|
|
|
|
|
2529xxxx sub r9,xxxxh ;/ ;00000000 +nop
|
|
|
|
|
@@copy_lop: ;3C020001 lui r2,0001h
|
|
|
|
|
8D430000 mov r3,[r10] ;8C42DFFC mov r2,[r2-2004h]
|
|
|
|
|
00000000 nop ;00000000 nop
|
|
|
|
|
AC430000 mov [r2],r3 ;00400008 jmp r2 ;=[0000DFFCh]
|
|
|
|
|
254A0004 add r10,4h ;00000000 +nop
|
|
|
|
|
1549FFFB jne r10,r9,@@copy_lop ; @@ret:
|
|
|
|
|
24420004 +add r2,4h ;03E00008 ret
|
|
|
|
|
3C010001 lui r1,0001h ;\[DFFCh]=r2 ;00000000 +nop
|
|
|
|
|
0xxxxxxx call xxxxxxxxh ; and call ... ;
|
|
|
|
|
AC22DFFC +mov [r1-2004h],r2 ;/ ;
|
|
|
|
|
```
|
|
|
|
|
Alternately, elo2 uses slightly different code at 8003961Ch:<br/>
|
|
|
|
|
```
|
|
|
|
|
240A00B0 mov r10,0B0h ;\ ; @@new_data:
|
|
|
|
|
0140F809 call r10 ; B(56h) GetC0Table ;3C02xxxx lui r2,8xxxh
|
|
|
|
|
24090056 +mov r9,56h ;/ ;2442xxxx sub r2,xxxxh
|
|
|
|
|
8C420018 mov r2,[r2+06h*4] ;\get C(06h) ;00400008 jmp r2 ;=@@new_cont_d
|
|
|
|
|
00000000 nop ;/ ;00000000 +nop ;=8xxxxxxxh
|
|
|
|
|
8C430070 mov r3,[r2+70h] ;\ ;00000000 nop
|
|
|
|
|
00000000 nop ; get ; @@new_data_end:
|
|
|
|
|
3069FFFF and r9,r3,0FFFFh ; early_card ; @@new_cont_d:
|
|
|
|
|
8C430074 mov r3,[r2+74h] ; irq_handler ;8C621074 mov r2,[r3+1074h]
|
|
|
|
|
00094C00 shl r9,10h ; ;00000000 nop
|
|
|
|
|
306AFFFF and r10,r3,0FFFFh ; ;30420080 and r2,80h ;I_STAT.7
|
|
|
|
|
012A1821 add r3,r9,r10 ;/ ;1040000B jz r2,@@ret
|
|
|
|
|
3C0Axxxx mov r10,xxxx0000h ;00000000 +nop
|
|
|
|
|
3C09xxxx mov r9,xxxx0000h ; @@wait_lop:
|
|
|
|
|
24620028 add r2,r3,28h ;=early+28h ;8C621044 mov r2,[r3+1044h]
|
|
|
|
|
254Axxxx sub r10,xxxxh ;=@@new_data ;00000000 nop
|
|
|
|
|
2529xxxx sub r9,xxxxh ;=@@new_data_end ;30420080 and r2,80h ;JOY_STAT.7
|
|
|
|
|
@@copy_lop: ;1440FFFC jnz r2,@@wait_lop
|
|
|
|
|
8D430000 mov r3,[r10] ;00000000 +nop
|
|
|
|
|
254A0004 add r10,4h ;3C02xxxx lui r2,8xxxh
|
|
|
|
|
24420004 add r2,4h ;8C42xxxx mov r2,[r2-xxxxh]
|
|
|
|
|
1549FFFC jne r10,r9,@@copy_lop ;00000000 nop
|
|
|
|
|
AC43FFFC +mov [r2-4h],r3 ;00400008 jmp r2 ;=[8xxxxxxxh]
|
|
|
|
|
3C018xxx mov r1,8xxx0000h ;\[...]=r2, ;00000000 +nop
|
|
|
|
|
0xxxxxxx call xxxxxxxxh ; and call ... ; @@ret:
|
|
|
|
|
AC22xxxx +mov [r1+xxxxh],r2 ;/ ;03E00008 ret
|
|
|
|
|
... ;00000000 +nop
|
|
|
|
|
```
|
2020-07-23 22:41:06 +02:00
|
|
|
Note: The above @@wait\_lop's should be more preferably done with timeouts (else
|
2020-07-23 20:49:17 +02:00
|
|
|
they may hang endless if a Sony Mouse is newly connected; the mouse does have
|
|
|
|
|
/ACK stuck LOW on power-up).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### patch\_uninstall\_early\_card\_irq\_handler:
|
|
|
|
|
Used to uninstall the "early\_card\_irq\_vector" (the BIOS installs that vector
|
|
|
|
|
from inside of B(4Ah) InitCard(pad\_enable), and, without patches, the BIOS
|
2020-07-23 20:49:17 +02:00
|
|
|
doesn't allow to uninstall it thereafter).<br/>
|
|
|
|
|
Used in Breath of Fire III (SLES-01304) at 8017E790, and also in Ace Combat 2
|
|
|
|
|
(SLUS-00404) at 801D23F4:<br/>
|
|
|
|
|
```
|
|
|
|
|
240A00B0 mov r10,0B0h ;\
|
|
|
|
|
0140F809 call r10 ; B(56h) GetC0Table
|
|
|
|
|
24090056 +mov r9,56h ;/
|
|
|
|
|
3C0Axxxx mov r10,xxxx0000h
|
|
|
|
|
3C09xxxx mov r9,xxxx0000h
|
|
|
|
|
8C420018 mov r2,[r2+06h*4] ;=00000C80h = exception_handler = C(06h)
|
|
|
|
|
254Axxxx add r10,xxxxh ;@@new_data
|
|
|
|
|
2529xxxx add r9,xxxxh ;@@new_data_end
|
|
|
|
|
@@copy_lop: ;\ @@new_data:
|
|
|
|
|
8D430000 mov r3,[r10] ; 00000000 nop
|
|
|
|
|
254A0004 add r10,4h ; 00000000 nop
|
|
|
|
|
24420004 add r2,4h ; 00000000 nop
|
|
|
|
|
1549FFFC jne r10,r9,@@copy_lop ; @@new_data_end:
|
|
|
|
|
AC43006C +mov [r2+70h-4],r3 ;/
|
|
|
|
|
```
|
|
|
|
|
Alternately, more inefficient, used in Blaster Master-Blasting Again
|
|
|
|
|
(SLUS-01031) at 80063FF4h, and Raiden DX at 80029694h:<br/>
|
|
|
|
|
```
|
|
|
|
|
24090056 mov r9,56h ;\
|
|
|
|
|
240A00B0 mov r10,0B0h ; B(56h) GetC0Table
|
|
|
|
|
0140F809 call r10 ;
|
|
|
|
|
00000000 +nop ;/
|
|
|
|
|
8C420018 mov r2,[r2+06h*4] ;=00000C80h = exception_handler = C(06h)
|
|
|
|
|
3C0Axxxx mov r10,xxxx0000h ;\@@new_data
|
|
|
|
|
254Axxxx add r10,xxxxh ;/
|
|
|
|
|
3C09xxxx mov r9,xxxx0000h ;\@@new_data_end
|
|
|
|
|
2529xxxx add r9,xxxxh ;/
|
|
|
|
|
@@copy_lop: ;\
|
|
|
|
|
8D430000 mov r3,[r10] ; @@new_data:
|
|
|
|
|
00000000 nop ; 00000000 nop
|
|
|
|
|
AC430070 mov [r2+70h],r3 ; 00000000 nop
|
|
|
|
|
254A0004 add r10,4h ;src ; 00000000 nop
|
|
|
|
|
1549FFFB jne r10,r9,@@copy_lop ; @@new_data_end:
|
|
|
|
|
24420004 +add r2,4h ;dst ;/
|
|
|
|
|
```
|
2020-07-23 22:41:06 +02:00
|
|
|
Note: the above code is same as "patch\_install\_lightgun\_irq\_handler", except
|
2020-07-23 20:49:17 +02:00
|
|
|
that it writes to r2+70h, instead of r2+80h.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### patch\_card\_specific\_delay:
|
|
|
|
|
Same purpose as the "early\_card\_irq\_patch" (but for the command/status bytes
|
2020-07-23 20:49:17 +02:00
|
|
|
rather than for the data bytes). The patch looks buggy since it inserts the
|
|
|
|
|
delay AFTER the acknowledge, but it DOES work (the BIOS accidently acknowledges
|
|
|
|
|
the IRQ twice; and the delay occurs PRIOR to 2nd acknowledge).<br/>
|
|
|
|
|
Used in Metal Gear Solid at 8009AAF0h, and in Legacy of Kain at 801A56D8h, and
|
|
|
|
|
in alone1 at 800AE38Ch:<br/>
|
|
|
|
|
```
|
|
|
|
|
24090057 mov r9,57h ;\ ; @@new_data:
|
|
|
|
|
240A00B0 mov r10,0B0h ; B(57h) GetB0Table ; 3C08A001 lui r8,0A001h
|
|
|
|
|
0140F809 call r10 ;/ ; 2508DF80 sub r8,2080h
|
|
|
|
|
00000000 +nop ; 0100F809 call r8 ;=A000DF80h
|
|
|
|
|
8C42016C mov r2,[r2+5Bh*4] ;B(5Bh) ; 00000000 +nop
|
|
|
|
|
00000000 nop ; 00000000 nop
|
|
|
|
|
8C4309C8 mov r3,[r2+9C8h] ;blah ; @@new_data_end:
|
|
|
|
|
3C0Axxxx lui r10,xxxxh ;\@@new_data ; 946F000A movh r15,[r3+0Ah]
|
|
|
|
|
254Axxxx sub r10,xxxxh ;/ ; 3C080000 mov r8,0h
|
|
|
|
|
3C09xxxx lui r9,xxxxh ;\@@new_data_end ; 01E2C025 or r24,r15,r2
|
|
|
|
|
2529xxxx sub r9,xxxxh ;/ ; 37190012 or r25,r24,12h
|
|
|
|
|
@@copy_lop: ; A479000A movh [r3+0Ah],r25
|
|
|
|
|
8D480000 mov r8,[r10] ; 24080028 mov r8,28h
|
|
|
|
|
00000000 nop ; @@wait_lop:
|
|
|
|
|
AC4809C8 mov [r2+9C8h],r8 ;B(5Bh)+9C8h.. ; 2508FFFF sub r8,1h
|
|
|
|
|
254A0004 add r10,4h ; 1500FFFE jnz r8,@@wait_lop
|
|
|
|
|
1549FFFB jne r10,r9,@@copy_lop ; 00000000 +nop
|
|
|
|
|
24420004 +add r2,4h ; 03E00008 ret ;above delay is
|
|
|
|
|
... ; 00000000 +nop ;in UNCACHED RAM
|
|
|
|
|
```
|
|
|
|
|
Alternately, slightly different code used in elo2 at800396D4h, and in Resident
|
|
|
|
|
Evil 2 at 800910E4h:<br/>
|
|
|
|
|
```
|
|
|
|
|
240A00B0 mov r10,0B0h ;\ ; @@swap_begin:
|
|
|
|
|
0140F809 call r10 ; B(57h) GetB0Table ; 3C088xxx lui r8,8xxxh
|
|
|
|
|
24090057 +mov r9,57h ;/ ; 2508xxxx sub r8,xxxxh
|
|
|
|
|
8C42016C mov r2,[r2+5Bh*4] ;B(5Bh) ; 0100F809 call r8 ;=8xxxxxxxh
|
|
|
|
|
3C0Axxxx mov r10,xxxx0000h ; 00000000 +nop
|
|
|
|
|
3C09xxxx mov r9,xxxx0000h ; 00000000 nop
|
|
|
|
|
8C4309C8 mov r3,[r2+9C8h] ;blah ; @@swap_end:
|
|
|
|
|
254Axxxx sub r10,xxxxh ;=@@swap_begin ; ;- - -
|
|
|
|
|
2529xxxx sub r9,xxxxh ;=@@swap_end ; 00000000 nop
|
|
|
|
|
@@swap_lop: ; 240800C8 mov r8,0C8h
|
|
|
|
|
8C4309C8 mov r3,[r2+9C8h] ;B(5Bh)+9C8h.. ; @@wait_lop:
|
|
|
|
|
8D480000 mov r8,[r10] ; 2508FFFF sub r8,1h
|
|
|
|
|
254A0004 add r10,4h ; 1500FFFE jnz r8,@@wait_lop
|
|
|
|
|
AD43FFFC mov [r10-4h],r3 ; 00000000 +nop
|
|
|
|
|
24420004 add r2,4h ; 03E00008 ret ;above delay is
|
|
|
|
|
1549FFFA jne r10,r9,@@swap_lop ; 00000000 +nop ;in CACHED RAM
|
|
|
|
|
AC4809C4 +mov [r2+9C4h],r8 ;
|
|
|
|
|
```
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### patch\_card\_info\_step4:
|
|
|
|
|
The "card\_info" function sends an incomplete read command to the card; in order
|
2020-07-23 20:49:17 +02:00
|
|
|
to receive status information. After receiving the last byte, the function does
|
|
|
|
|
accidently send a further byte to the card, so the card responds by another
|
|
|
|
|
byte (and another IRQ7), which is not processed nor acknowledged by the BIOS.
|
|
|
|
|
This patch kills the opcode that sends the extra byte.<br/>
|
|
|
|
|
Used in alone1 at 800AE214h:<br/>
|
|
|
|
|
```
|
|
|
|
|
24090057 mov r9,57h ;\
|
|
|
|
|
240A00B0 mov r10,0B0h ; B(57h) GetB0Table
|
|
|
|
|
0140F809 call r10 ;
|
|
|
|
|
00000000 +nop ;/
|
|
|
|
|
240A0009 mov r10,9h ;=blah
|
|
|
|
|
8C42016C mov r2,[r2+5Bh*4] ;=B(5Bh)
|
|
|
|
|
00000000 nop
|
|
|
|
|
20431988 addt r3,r2,1988h ;=B(5Bh)+1988h ;\store a NOP,
|
|
|
|
|
0xxxxxxx call xxxxxxxxh ; and call ...
|
|
|
|
|
AC600000 +mov [r3],0 ;=nop ;/
|
|
|
|
|
```
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### patch\_pad\_error\_handling\_and\_get\_pad\_enable\_functions:
|
2020-07-23 20:49:17 +02:00
|
|
|
If a transmission error occurs (or if there's no controller connected), then
|
|
|
|
|
the Pad handler handler does usually issue a strange chip select signal to the
|
2020-07-23 22:41:06 +02:00
|
|
|
OTHER controller slot, and does then execute the bizarre\_pad\_delay function.
|
2020-07-23 20:49:17 +02:00
|
|
|
The patch below overwrites that behaviour by NOPs. Purpose of the original (and
|
|
|
|
|
patched) behaviour is unknown.<br/>
|
|
|
|
|
Used by Perfect Assassin at 800519D4h:<br/>
|
|
|
|
|
```
|
|
|
|
|
240A00B0 mov r10,0B0h ;\
|
|
|
|
|
0140F809 call r10 ; B(57h) GetB0Table
|
|
|
|
|
24090057 +mov r9,57h ;/
|
|
|
|
|
8C42016C mov r2,[r2+5Bh*4] ;=B(5Bh)
|
|
|
|
|
3C01xxxx mov r1,xxxx0000h
|
|
|
|
|
20430884 addt r3,r2,884h ;B(5Bh)+884h
|
|
|
|
|
AC23xxxx mov [r1+xxxxh],r3 ;<--- SetPadEnableFlag()
|
|
|
|
|
3C01xxxx mov r1,xxxx0000h
|
|
|
|
|
20430894 addt r3,r2,894h ;B(5Bh)+894h
|
|
|
|
|
2409000B mov r9,0Bh ;len
|
|
|
|
|
AC23xxxx mov [r1+xxxxh],r3 ;<--- ClearPadEnableFlag()
|
|
|
|
|
@@fill_lop: ;\
|
|
|
|
|
2529FFFF sub r9,1h ;
|
|
|
|
|
AC400594 mov [r2+594h],0 ;B(5Bh)+594h.. ; erase error handling
|
|
|
|
|
1520FFFD jnz r9,@@fill_lop ;
|
|
|
|
|
24420004 +add r2,4h ;/
|
|
|
|
|
```
|
|
|
|
|
Alternately, same as above, but with inefficient nops, used by Sporting Clays
|
|
|
|
|
at 8001B4B4h:<br/>
|
|
|
|
|
```
|
|
|
|
|
24090057 mov r9,57h ;\
|
|
|
|
|
240A00B0 mov r10,0B0h ; B(57h) GetB0Table
|
|
|
|
|
0140F809 call r10 ;
|
|
|
|
|
00000000 +nop ;/
|
|
|
|
|
8C42016C mov r2,[r2+5Bh*4]
|
|
|
|
|
2409000B mov r9,0Bh ;len
|
|
|
|
|
20430884 addt r3,r2,884h
|
|
|
|
|
3C01xxxx mov r1,xxxx0000h
|
|
|
|
|
AC23xxxx mov [r1+xxxxh],r3 ;<--- SetPadEnableFlag()
|
|
|
|
|
20430894 addt r3,r2,894h
|
|
|
|
|
3C01xxxx mov r1,xxxx0000h
|
|
|
|
|
AC23xxxx mov [r1+xxxxh],r3 ;<--- ClearPadEnableFlag()
|
|
|
|
|
@@fill_lop: ;\
|
|
|
|
|
AC400594 mov [r2+594h],0 ;
|
|
|
|
|
24420004 add r2,4h ; erase error handling
|
|
|
|
|
2529FFFF sub r9,1h ;
|
|
|
|
|
1520FFFC jnz r9,@@fill_lop ;
|
|
|
|
|
00000000 +nop ;/
|
|
|
|
|
```
|
|
|
|
|
Alternately, same as above, but without getting PadEnable functions, used in
|
|
|
|
|
Pandemonium II (at 80083C94h and at 8010B77Ch):<br/>
|
|
|
|
|
```
|
|
|
|
|
240A00B0 mov r10,0B0h ;\
|
|
|
|
|
0140F809 call r10 ; B(57h) GetB0Table
|
|
|
|
|
24090057 +mov r9,57h ;/
|
|
|
|
|
8C42016C mov r2,[r2+5Bh*4] ;=B(5Bh)
|
|
|
|
|
2409000B mov r9,0Bh ;len ;\
|
|
|
|
|
@@fill_lop: ;
|
|
|
|
|
2529FFFF sub r9,1h ; erase error handling
|
|
|
|
|
AC400594 mov [r2+594h],0 ;B(5Bh)+594h.. ;
|
|
|
|
|
1520FFFD jnz r9,@@fill_lop ;
|
|
|
|
|
24420004 +add r2,4h ;/
|
|
|
|
|
```
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### patch\_optional\_pad\_output:
|
2020-07-23 20:49:17 +02:00
|
|
|
The normal BIOS functions are only allowing to READ from the controllers, but
|
|
|
|
|
not to SEND data to them (which would be required to control Rumble motors, and
|
|
|
|
|
to auto-activate Analog mode without needing the user to press the Analog
|
|
|
|
|
button). Internally, the BIOS does include some code for sending data to the
|
|
|
|
|
controller, but it doesn't offer a function vector for setting up the data
|
|
|
|
|
source address, and, even if that would be supported, it clips the data bytes
|
|
|
|
|
to 00h or 01h. The patch below retrieves the required SetPadOutput function
|
|
|
|
|
address (in which only the src1/src2 addresses are relevant, the blah1/blah2
|
|
|
|
|
values aren't used), and suppresses clipping (ie. allows to send any bytes in
|
|
|
|
|
range 00h..FFh).<br/>
|
|
|
|
|
Used in Resident Evil 2 at 80091914h:<br/>
|
|
|
|
|
```
|
|
|
|
|
240A00B0 mov r10,0B0h ;\
|
|
|
|
|
0140F809 call r10 ; B(57h) GetB0Table
|
|
|
|
|
24090057 +mov r9,57h ;/
|
|
|
|
|
8C42016C mov r2,[r2+5Bh*4] ;B(5Bh)
|
|
|
|
|
3C0Axxxx mov r10,xxxx0000h
|
|
|
|
|
3C09xxxx mov r9,xxxx0000h
|
|
|
|
|
3C01xxxx mov r1,xxxx0000h
|
|
|
|
|
204307A0 addt r3,r2,7A0h ;B(5Bh)+7A0h
|
|
|
|
|
254Axxxx add r10,xxxxh ;=@@new_data
|
|
|
|
|
2529xxxx add r9,xxxxh ;=@@new_data_end
|
|
|
|
|
AC23xxxx mov [r1-xxxxh],r3 ;<--- SetPadOutput(src1,blah1,src2,blah2)
|
|
|
|
|
@@double_copy_lop: ;\
|
|
|
|
|
8D430000 mov r3,[r10] ; @@new_data:
|
|
|
|
|
254A0004 add r10,4h ; 00551024 and r2,r21
|
|
|
|
|
AC4303D8 mov [r2+3D8h],r3 ;<--- here ; 00000000 nop
|
|
|
|
|
24420004 add r2,4h ; 00000000 nop
|
|
|
|
|
1549FFFB jne r10,r9,@@double_copy_lop ; 00000000 nop
|
|
|
|
|
AC4304DC +mov [r2+4DCh],r3 ;<--- here ;/ @@new_data_end:
|
|
|
|
|
```
|
|
|
|
|
Alternately, more inefficient (with NOPs), used in Lemmings at 80036618h:<br/>
|
|
|
|
|
```
|
|
|
|
|
24090057 mov r9,57h ;\
|
|
|
|
|
240A00B0 mov r10,0B0h ; B(57h) GetB0Table
|
|
|
|
|
0140F809 call r10 ;
|
|
|
|
|
00000000 +nop ;/
|
|
|
|
|
3C0Axxxx mov r10,xxxx0000h
|
|
|
|
|
254Axxxx add r10,xxxxh ;=@@new_data
|
|
|
|
|
3C09xxxx movp r9,xxxx0000h
|
|
|
|
|
2529xxxx add r9,xxxxh ;=@@new_data_end
|
|
|
|
|
8C42016C mov r2,[r2+5Bh*4] ;B(5Bh)
|
|
|
|
|
00000000 nop
|
|
|
|
|
204307A0 addt r3,r2,7A0h ;B(5Bh)+7A0h
|
|
|
|
|
3C01xxxx mov r1,xxxx0000h
|
|
|
|
|
AC23xxxx mov [r1+xxxxh],r3 ;<--- SetPadOutput(src1,blah1,src2,blah2)
|
|
|
|
|
@@double_copy_lop: ;\
|
|
|
|
|
8D430000 mov r3,[r10] ; @@new_data:
|
|
|
|
|
00000000 nop ; 00551024 and r2,r21
|
|
|
|
|
AC4303D8 mov [r2+3D8h],r3 ; 00000000 nop
|
|
|
|
|
AC4304E0 mov [r2+4E0h],r3 ; 00000000 nop
|
|
|
|
|
24420004 add r2,4h ; 00000000 nop
|
|
|
|
|
254A0004 add r10,4h ; @@new_data_end:
|
|
|
|
|
1549FFF9 jne r10,r9,@@double_copy_lop ;
|
|
|
|
|
00000000 +nop ;/
|
|
|
|
|
```
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### patch\_no\_pad\_card\_auto\_ack:
|
2020-07-23 20:49:17 +02:00
|
|
|
This patch suppresses automatic IRQ0 (vblank) acknowleding in the Pad/Card IRQ
|
|
|
|
|
handler, that, even if auto-ack is enabled. Obviously, one could as well
|
|
|
|
|
disable auto-ack via B(5Bh) ChangeClearPad(int), so this patch is total
|
|
|
|
|
nonsense. Used in Resident Evil 2 at 800919ACh:<br/>
|
|
|
|
|
```
|
|
|
|
|
240A00B0 mov r10,0B0h ;\
|
|
|
|
|
0140F809 call r10 ; B(57h) GetB0Table
|
|
|
|
|
24090057 +mov r9,57h ;/
|
|
|
|
|
8C42016C mov r2,[r2+5Bh*4] ;=B(5Bh)
|
|
|
|
|
240A0009 mov r10,9h ;len ;\
|
|
|
|
|
2043062C addt r3,r2,62Ch ;=B(5Bh)+62Ch ;
|
|
|
|
|
@@fill_lop: ;
|
|
|
|
|
254AFFFF sub r10,1h ;
|
|
|
|
|
AC600000 mov [r3],0 ;
|
|
|
|
|
1540FFFD jnz r10,@@fill_lop ;
|
|
|
|
|
24630004 +add r3,4h ;/
|
|
|
|
|
```
|
|
|
|
|
Alternately, same as above, but more inefficient, used in Sporting Clays at
|
|
|
|
|
8001B53Ch:<br/>
|
|
|
|
|
```
|
|
|
|
|
24090057 mov r9,57h ;\
|
|
|
|
|
240A00B0 mov r10,0B0h ; B(57h) GetB0Table
|
|
|
|
|
0140F809 call r10 ;
|
|
|
|
|
00000000 +nop ;/
|
|
|
|
|
240A0009 mov r10,9h ;len
|
|
|
|
|
8C42016C mov r2,[r2+5Bh*4]
|
|
|
|
|
00000000 nop
|
|
|
|
|
2043062C addt r3,r2,62Ch
|
|
|
|
|
@@fill_lop: ;\
|
|
|
|
|
AC600000 mov [r3],0 ;
|
|
|
|
|
24630004 add r3,4h ;
|
|
|
|
|
254AFFFF sub r10,1h ;
|
|
|
|
|
1540FFFC jnz r10,@@fill_lop ;
|
|
|
|
|
00000000 +nop ;/
|
|
|
|
|
```
|
|
|
|
|
Either way, no matter if using the patch or if using ChangeClearPad(int),
|
|
|
|
|
having auto-ack disabled allows to install a custom vblank IRQ0 handler, which
|
|
|
|
|
is probably desired for most games, however, mind that the PSX BIOS doesn't
|
|
|
|
|
actually support the same IRQ to be processed by two different IRQ handlers,
|
|
|
|
|
eg. the custom handler may acknowledge the IRQ even when the Pad/Card handler
|
|
|
|
|
didn't process it, so pad input may become bumpy.<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### patch\_install\_lightgun\_irq\_handler:
|
2020-07-23 20:49:17 +02:00
|
|
|
Used in Sporting Clays at 80027D68h (when Konami Lightgun connected):<br/>
|
|
|
|
|
```
|
|
|
|
|
240A00B0 mov r10,0B0h ;\
|
|
|
|
|
0140F809 call r10 ; B(56h) GetC0Table
|
|
|
|
|
24090056 +mov r9,56h ;/
|
|
|
|
|
3C0Axxxx mov r10,xxxx0000h ;src
|
|
|
|
|
3C09xxxx mov r9,xxxx0000h ;src.end
|
|
|
|
|
8C420018 mov r2,[r2+06h*4] ;C(06h)
|
|
|
|
|
254Axxxx add r10,xxxxh ;src
|
|
|
|
|
2529xxxx add r9,xxxxh ;src.end (=src+10h)
|
|
|
|
|
@@copy_lop: ;\ ; @@src:
|
|
|
|
|
8D430000 mov r3,[r10] ; ;3C02xxxx mov r2,xxxx0000h
|
|
|
|
|
254A0004 add r10,4h ; ;2442xxxx add r2,xxxxh
|
|
|
|
|
24420004 add r2,4h ; ;0040F809 call r2 ;lightgun_proc
|
|
|
|
|
1549FFFC jne r10,r9,@@copy_lop ; ;00000000 +nop
|
|
|
|
|
AC43007C +mov [r2+80h-4],r3 ;/ @@src_end:
|
|
|
|
|
```
|
|
|
|
|
Alternately, same as above, but more inefficient, used in DQM (Dragon Quest
|
|
|
|
|
Monsters 1&2) at 80089390h (install) and 800893F8h (uninstall):<br/>
|
|
|
|
|
```
|
|
|
|
|
24090056 mov r9,56h ;\
|
|
|
|
|
240A00B0 mov r10,0B0h ; B(56h) GetC0Table
|
|
|
|
|
0140F809 call r10 ;
|
|
|
|
|
00000000 +nop ;/
|
|
|
|
|
8C420018 mov r2,[r2+06h*4] ;=00000C80h = exception_handler = C(06h)
|
|
|
|
|
3C0Axxxx mov r10,xxxx0000h ;\@@new_data (3xNOP)
|
|
|
|
|
254Axxxx add r10,-xxxxh ;/
|
|
|
|
|
3C09xxxx mov r9,xxxx0000h ;\@@new_data_end
|
|
|
|
|
2529xxxx add r9,-xxxxh ;/
|
|
|
|
|
@@copy_lop: ;\
|
|
|
|
|
8D430000 mov r3,[r10] ; @@new_data: ;for (un-)install...
|
|
|
|
|
00000000 nop ; 00000000 nop / 3C02xxxx mov r2,xxxx0000h
|
|
|
|
|
AC430080 mov [r2+80h],r3 ; 00000000 nop / 2442xxxx add r2,-xxxxh
|
|
|
|
|
254A0004 add r10,4h ; 00000000 nop / 0040F809 call r2 ;proc
|
|
|
|
|
1549FFFB jne r10,r9,@@copy_lop ; @@new_data_end:
|
|
|
|
|
24420004 +add r2,4h ;/
|
|
|
|
|
```
|
|
|
|
|
Some lightgun games (eg. Project Horned Owl) do (additionally to above stuff)
|
|
|
|
|
hook the exception vector at 00000080h, the hook copies the horizontal
|
|
|
|
|
coordinate (timer0) to a variable in RAM, thus getting the timer0 value
|
|
|
|
|
"closest" to the actual IRQ execution. Doing that may eliminate some
|
|
|
|
|
unpredictable timing offsets that could be caused by cache hits/misses during
|
|
|
|
|
later IRQ handling (and may also eliminate a rather irrelevant 1-cycle
|
|
|
|
|
inaccuracy depending on whether EPC was pointing to a GTE opcode, and also
|
2020-07-23 22:41:06 +02:00
|
|
|
eliminates constant cycle offsets depending on whether early\_card\_irq\_handler
|
2020-07-23 20:49:17 +02:00
|
|
|
was installed and enabled, and might eliminate timing differences for different
|
|
|
|
|
BIOS versions).<br/>
|
|
|
|
|
|
2020-07-23 22:41:06 +02:00
|
|
|
#### set\_conf\_without\_realloc:
|
2020-07-23 20:49:17 +02:00
|
|
|
Used in Spec Ops Airborne Commando at 80070AE8h, and also in the homebrew game
|
|
|
|
|
Roll Boss Rush at 80010B68h and 8001B85Ch. Purpose is unknown (maybe to
|
|
|
|
|
override improperly defined .EXE headers).<br/>
|
|
|
|
|
```
|
|
|
|
|
8C030474 mov r3,[200h+(9Dh*4)] ;\get ptr to A(9Dh) GetConf (done so,
|
|
|
|
|
00000000 nop ;/as there's no "GetA0Table" funtion)
|
|
|
|
|
94620000 movh r2,[r3+0h] ;lui msw ;\
|
|
|
|
|
84630004 movhs r3,[r3+4h] ;lw lsw+8 ; extract ptr to "boot_cnf_values"
|
|
|
|
|
00021400 shl r2,10h ;msw*10000h ; (from first 2 opcodes of GetConf)
|
|
|
|
|
2442FFF8 sub r2,8h ;undo +8 ;
|
|
|
|
|
00431021 add r2,r3 ;lsw ;/
|
|
|
|
|
AC450000 mov [r2+0h],r5 ;num_TCB ;\set num_EvCB,num_TCB,stacktop
|
|
|
|
|
AC440004 mov [r2+4h],r4 ;num_EvCB ; (unlike A(9Ch) SetConf, without
|
|
|
|
|
03E00008 ret ; actually reallocting anything)
|
|
|
|
|
AC460008 +mov [r2+8h],r6 ;stacktop ;/
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
#### Cheat Devices
|
|
|
|
|
CAETLA detects the PSX BIOS version by checksumming BFC06000h..BFC07FFFh and
|
|
|
|
|
does then use some hardcoded BIOS addresses based on that checksum. The reason
|
|
|
|
|
for doing that is probably that the Pre-Boot Expansion ROM vector is called
|
|
|
|
|
with the normal A0h/B0h/C0h vectors being still uninitialized.<br/>
|
|
|
|
|
Problems are that the hardcoded addresses won't work with all BIOSes (eg. not
|
|
|
|
|
with the no$psx bios clone, probably also not with the newer PS2 BIOS),
|
|
|
|
|
moreover, the checksumming can fail with patched original BIOSes (eg. no$psx
|
|
|
|
|
allows to enable TTY debug messages and to skip the BIOS intro).<br/>
|
|
|
|
|
The Cheat Firmwares are probably also hooking the Vblank handler, and maybe
|
|
|
|
|
also some other functions.<br/>
|
|
|
|
|
ACTION REPLAY (at least later versions like 2.81) uses the Pre-Boot handler to
|
|
|
|
|
set a COP0 hardware breakpoint at 80030000h and does then resume normal BIOS
|
|
|
|
|
booting (which will then initialize important things like A0h/B0h/C0h tables,
|
|
|
|
|
and will then break when starting the GUI code at 80030000h).<br/>
|
|
|
|
|
XPLORER searches opcode 24040385h at BFC06000h and up, and does then place a
|
|
|
|
|
COP0 opcode fetch breakpoint at the opcode address+10h (note: this is within a
|
|
|
|
|
branch delay slot, which makes COP0 emulation twice as complicated). XPLORER
|
|
|
|
|
does also require space in unused BIOS RAM addresses (eg. Xplorer v3.20: addr
|
|
|
|
|
7880h at 1F002280h, addr 017Fh at 1F006A58h).<br/>
|
|
|
|
|
|
|
|
|
|
#### Note
|
|
|
|
|
Most games include two or three patches. The only game that I've seen so far
|
|
|
|
|
that does NOT use any patches is Wipeout 2097.<br/>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
