Aston-HyperV-Code/Guests/RTR-01.ps1

79 lines
2.0 KiB
PowerShell
Raw Normal View History

2021-04-09 15:51:30 +02:00
# Alexandre SIMAO
# GPLv3
# Script to install and configure a Fuckdows Server 2016 as a router
# RTR-01 Only
# Change the poor machine name
2021-04-20 10:49:35 +02:00
echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"
Rename-computer RTR-01
$adapter = Get-NetAdapter | ? {$_.MacAddress -eq "00-15-5D-02-70-00"}
2021-04-21 16:02:07 +02:00
Rename-NetAdapter -Name "Eth*" -NewName "Arc-SRV"
2021-04-20 16:08:08 +02:00
#Arc-SRV
$IP = "192.168.8.1"
$MaskBits = 24 # This means subnet mask = 255.255.255.0
$Gateway = "192.168.8.254"
$Dns = "9.9.9.9"
$IPType = "IPv4"
$adapter | New-NetIPAddress `
-AddressFamily $IPType `
-IPAddress $IP `
-PrefixLength $MaskBits `
-DefaultGateway $Gateway
2021-04-20 16:08:08 +02:00
2021-04-09 15:51:30 +02:00
# Install Routing and necessary linked roles
Install-WindowsFeature RemoteAccess, RSAT-RemoteAccess-PowerShell, Routing -IncludeManagementTools
#Install-remoteAccess -VpnType Vpn
Set-NetConnectionProfile -NetworkCategory Private
2021-04-20 16:08:08 +02:00
$Params = @{
"Name" = 'vm-monitoring-icmpv4'
"Action" = 'Allow'
}
2021-04-09 15:51:30 +02:00
2021-04-20 16:08:08 +02:00
Set-NetFirewallRule @Params
2021-04-09 15:51:30 +02:00
# Activate NAT and DHCP Relay
netsh routing ip relay install
netsh routing ip add interface name="WAN" state=enable
netsh routing ip relay add interface "WAN"
netsh rout ip rel set int ARC-CLI min=0
netsh routing ip relay add interface "Arc-CLI"
netsh rout ip rel set int ARC-SRV min=0
netsh routing ip relay add interface "Arc-SRV"
netsh rout ip rel set int WAN min=0
netsh routing ip relay add dhcpserver 192.168.8.1
set-service RemoteAccess -StartupType Automatic
Start-Service RemoteAccess
netsh -f ./Arc-CLI.conf
netsh -f ./Arc-SRV.conf
netsh -f ./WAN.conf
2021-04-20 16:08:08 +02:00
Set-NetConnectionProfile -networkcategory private
2021-04-09 15:51:30 +02:00
# Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
$Params = @{
"Name" = 'vm-monitoring-icmpv4'
"Action" = 'Allow'
}
Set-NetFirewallRule @Params
# Add routes
route add -p 192.168.8.0/24 192.168.8.254
route add -p 192.168.12.0.24 192.168.12.254
route add -p 192.168.255.0/24 192.168.255.8
route add -p 192.168.128.8/24 192.168.255.128
2021-04-19 16:04:47 +02:00
route add -p 0.0.0.0/0 192.168.255.254