Aston-HyperV-Code/Guests/RTR-01.ps1

# Alexandre SIMAO
# GPLv3

# Script to install and configure a Fuckdows Server 2016 as a router
# RTR-01 Only

# Change the poor machine name

echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"

Rename-computer RTR-01

$adapter = Get-NetAdapter | ? {$_.MacAddress -eq "00-15-5D-02-70-00"}
Rename-NetAdapter -Name "Eth*" -NewName "Arc-SRV"

#Arc-SRV
$IP = "192.168.8.1"
$MaskBits = 24 # This means subnet mask = 255.255.255.0
$Gateway = "192.168.8.254"
$Dns = "9.9.9.9"
$IPType = "IPv4"

$adapter | New-NetIPAddress `
 -AddressFamily $IPType `
 -IPAddress $IP `
 -PrefixLength $MaskBits `
 -DefaultGateway $Gateway



# Install Routing and necessary linked roles
Install-WindowsFeature RemoteAccess, RSAT-RemoteAccess-PowerShell, Routing -IncludeManagementTools
#Install-remoteAccess -VpnType Vpn

Set-NetConnectionProfile -NetworkCategory Private
$Params = @{
	"Name"   = 'vm-monitoring-icmpv4'
	"Action"        = 'Allow'
}

Set-NetFirewallRule @Params
# Activate NAT and DHCP Relay
netsh routing ip relay install

netsh routing ip add interface name="WAN" state=enable

netsh routing ip relay add interface "WAN"
netsh rout ip rel set int ARC-CLI min=0
netsh routing ip relay add interface "Arc-CLI"
netsh rout ip rel set int ARC-SRV min=0
netsh routing ip relay add interface "Arc-SRV"
netsh rout ip rel set int WAN min=0
netsh routing ip relay add dhcpserver 192.168.8.1

set-service RemoteAccess -StartupType Automatic
Start-Service RemoteAccess

netsh -f ./Arc-CLI.conf
netsh -f ./Arc-SRV.conf
netsh -f ./WAN.conf

Set-NetConnectionProfile -networkcategory private

# Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
$Params = @{
	"Name"   = 'vm-monitoring-icmpv4'
	"Action"        = 'Allow'
}

Set-NetFirewallRule @Params

# Add routes

route add -p 192.168.8.0/24 192.168.8.254
route add -p 192.168.12.0.24 192.168.12.254
route add -p 192.168.255.0/24 192.168.255.8
route add -p 192.168.128.8/24 192.168.255.128
route add -p 0.0.0.0/0 192.168.255.254