chore: add RTR-03 commenting+end status

Guests/RTR-03.ps1

@@ -9,72 +9,84 @@ echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"
 
 ### Change the poor machine name
 
-echo "Renaming Computer"
+echo "Renaming Computer as RTR-03"
 Rename-computer RTR-03
+echo "Done!"
+
 #END
 
 ### Rename Adapters by parsing the VM device name
 
-echo "Renaming Computer"
+echo "Renaming adapter"
 $adapts = Get-NetAdapter
 foreach ($adapt in $adapts) {
 $HVName = (Get-NetAdapterAdvancedProperty -name $adapt.name -DisplayName "Hyper-v Network Adapter Name").DisplayValue
 Rename-Netadapter -name $adapt.name -NewName $HVName
 }
+echo "Done!"
+
 #End
 
 ### Pausing to let things settle
 
 echo "Sleeping 10s"
 Sleep 10
-
-### Général IP configure
-
-echo "IP Configuration"
-$MaskBits = 24 # This means subnet mask = 255.255.255.0
-$IPType = "IPv4"
+echo "Done!"
 
 #WAN IP conf
 
+echo "IP configuration via netsh"
 netsh interface ip set address name="WAN" static 192.168.255.254 255.255.255.0
+echo "Done!"
 
 #Aston
 
+echo "Setting Aston interface as DHCP to be sure"
 netsh interface ip set address name="Aston" DHCP
+echo "Done!"
+
+#END
 
 ### DNS Conf for all InterfaceAlias
 
-echo "DNS conf"
+echo "Setting 9.9.9.9 as default DNS on all interfaces"
 foreach ($c in Get-NetAdapter) { write-host 'Setting DNS for' $c.interfaceName ; Set-DnsClientServerAddress -InterfaceIndex $c.interfaceindex -ServerAddresses ('9.9.9.9') }
+echo "Done!"
+
 #End
 
 ### Install Routing and necessary linked roles
 
-#echo "installing VPN routing role"
+#echo "installing Routing and Nat role+setting autostart"
 
 Install-windowsFeature -Name Routing -IncludemanagementTools
 Install-remoteAccess -VpnType Routingonly
 set-service RemoteAccess -StartupType Automatic
 Start-Service RemoteAccess
+echo "Done!"
 
 # Configure NAT
 
+echo "Activating and configuring NAT"
 netsh routing ip nat install
 netsh routing ip nat add interface name="WAN" mode=Private
 netsh routing ip nat add interface name="Aston" mode=FULL
+echo "Done!"
 
 ### Change ZoneAlarm rule to accept incoming ICMP ipv4 probes ###
 
+echo "changing firewall rule to accept ICMP probes"
 Get-NetFirewallRule -name "*ICMP4-ERQ-In*" |Enable-NetFirewallRule
+echo "Done!"
 
 #END
 
-#netsh -f ./WAN.conf
-
 ### Set connection as Private
 
 echo "Setting connection as private"
 Get-NetAdapter | Set-NetConnectionProfile -NetworkCategory Private
+echo "Done!"
+
 #End
 
 # Add routes
@@ -84,7 +96,14 @@ route add -p 192.168.8.0/24 192.168.255.8
 route add -p 192.168.12.0/24 192.168.255.8
 route add -p 192.168.128.0/24 192.168.255.128
 route add -p 0.0.0.0/0 192.168.255.254
+echo "Done!"
 
+# Renewing DHCP lease
+
+echo "Renew DHCP Lease to be sure"
 ipconfig /renew
-Read-Host "Finished???"
+
+#reboot
+
+Read-Host "Press enter to reboot"
 Restart-Computer