POC: Before auto launch

Guests/RTR-01.ps1

@@ -72,10 +72,12 @@ Set-NetFirewallRule @Params
 echo "Activate NAT and DHCP Relay"
 netsh routing ip relay install
 
+netsh routing ip add interface name="Arc-SRV" state=enable
+netsh routing ip add interface name="Arc-CLI" state=enable
 netsh routing ip add interface name="WAN" state=enable
 
 netsh routing ip relay add interface "WAN"
-netsh rout ip rel set int ARC-CLI min=0
+netsh rout ip rel set int ARC-SRV min=0
 netsh routing ip relay add interface "Arc-CLI"
 netsh rout ip rel set int ARC-SRV min=0
 netsh routing ip relay add interface "Arc-SRV"

Guests/RTR-02.ps1

@@ -1,32 +1,56 @@
-# Alexandre SIMAO
+# Made by Alexandre SIMAO
 # GPLv3
 
 # Script to install and configure a Fuckdows Server 2016 as a router
-# RTR-02 Only
+# RTR-01 Only
+# Script done
+
+# Change the poor machine name
 
 echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"
 
-# Change the poor machine name
+Rename-computer RTR-02
-Rename-computer "RTR-02"
 
-Rename-NetAdapter -Name "Ethernet" -NewName "Bou-LAN"
+$adapts = Get-NetAdapter
-Rename-NetAdapter -Name "Ethernet 2" -NewName "WAN"
+foreach ($adapt in $adapts) {
+$HVName = (Get-NetAdapterAdvancedProperty -name $adapt.name -DisplayName "Hyper-v Network Adapter Name").DisplayValue
+Rename-Netadapter -name $adapt.name -NewName $HVName
+}
+
+#Général IP configure
+
+$MaskBits = 24 # This means subnet mask = 255.255.255.0
+$IPType = "IPv4"
+
+#Bou-LAN IP conf
+
+$adapter = Get-NetAdapter | ? {$_.Name -eq "Bou-LAN"}
+$IP = "192.168.128.254"
+$adapter | New-NetIPAddress `
+ -AddressFamily $IPType `
+ -IPAddress $IP `
+ -PrefixLength $MaskBits
+
+ #WAN
+
+ $adapter = Get-NetAdapter | ? {$_.Name -eq "WAN"}
+ $IP = "192.168.255.254"
+ $adapter | New-NetIPAddress `
+  -AddressFamily $IPType `
+  -IPAddress $IP `
+  -PrefixLength $MaskBits `
+
+#DNS Conf for all InterfaceAlias
+foreach ($c in Get-NetAdapter) { write-host 'Setting DNS for' $c.interfaceName ; Set-DnsClientServerAddress -InterfaceIndex $c.interfaceindex -ServerAddresses ('9.9.9.9') }
 
-netsh interface ip set address "WAN" static 192.168.255.8 255.255.255.0 192.168.255.254
-netsh interface ip set address "Bou-LAN" static 192.168.128.254 255.255.255.0
-netsh interface ip set dns name="WAN" static 9.9.9.9.
 
 # Install Routing and necessary linked roles
 Install-WindowsFeature RemoteAccess, RSAT-RemoteAccess-PowerShell, Routing -IncludeManagementTools
-set-service RemoteAccess -StartupType Automatic
-Start-Service RemoteAccess
-
-# Display interfaces and active forwarding for all of thm via Regedit
-netsh inter show inter
-
 
+#Install VPN
+echo "Install-remoteAccess -VpnType Vpn"
+Install-remoteAccess -VpnType Vpn
 Set-NetConnectionProfile -NetworkCategory Private
-
 $Params = @{
 	"Name"   = 'vm-monitoring-icmpv4'
 	"Action"        = 'Allow'
@@ -35,18 +59,27 @@ $Params = @{
 Set-NetFirewallRule @Params
 
 # Activate NAT and DHCP Relay
+echo "Activate NAT and DHCP Relay"
 netsh routing ip relay install
 
+netsh routing ip add interface name="Bou-LAN" state=enable
 netsh routing ip add interface name="WAN" state=enable
 
-netsh routing ip relay add interface "WAN"
+
-netsh rout ip rel set int ARC-CLI min=0
 netsh routing ip relay add interface "Bou-LAN"
 netsh rout ip rel set int ARC-SRV min=0
+netsh routing ip relay add interface "WAN"
+netsh rout ip rel set int WAN min=0
+netsh routing ip relay add dhcpserver 192.168.8.1
 
+set-service RemoteAccess -StartupType Automatic
+Start-Service RemoteAccess
 
+netsh -f ./WAN.conf
 netsh -f ./Bou-LAN.conf
 
+Set-NetConnectionProfile -networkcategory private
+
 # Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
 $Params = @{
 	"Name"   = 'vm-monitoring-icmpv4'
@@ -58,7 +91,7 @@ Set-NetFirewallRule @Params
 # Add routes
 
 route add -p 192.168.8.0/24 192.168.255.8
-route add -p 192.168.12.0.24 192.168.255.8
+route add -p 192.168.12.0/24 192.168.255.8
-route add -p 192.168.255.0/24 192.168.255.128
-route add -p 192.168.128.0/24 192.168.128.254
 route add -p 0.0.0.0/0 192.168.255.254
+
+Read-Host "Finished???"

Guests/RTR-03.ps1

@@ -1,34 +1,53 @@
-# Alexandre SIMAO
+# Made by Alexandre SIMAO
 # GPLv3
 
-### TODO ?
-
 # Script to install and configure a Fuckdows Server 2016 as a router
-# RTR-03 Only
+# RTR-01 Only
-echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"
+# Script done
 
 # Change the poor machine name
-Rename-computer "RTR-03"
 
-Rename-NetAdapter -Name "Ethernet" -NewName "WAN"
+echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"
-Rename-NetAdapter -Name "Ethernet 2" -NewName "Aston"
+
+Rename-computer RTR-03
+
+$adapts = Get-NetAdapter
+foreach ($adapt in $adapts) {
+$HVName = (Get-NetAdapterAdvancedProperty -name $adapt.name -DisplayName "Hyper-v Network Adapter Name").DisplayValue
+Rename-Netadapter -name $adapt.name -NewName $HVName
+}
+
+#Général IP configure
+
+$MaskBits = 24 # This means subnet mask = 255.255.255.0
+$IPType = "IPv4"
+
+#WAN IP conf
+
+$adapter = Get-NetAdapter | ? {$_.Name -eq "WAN"}
+$IP = "192.168.255.254"
+$adapter | New-NetIPAddress `
+ -AddressFamily $IPType `
+ -IPAddress $IP `
+ -PrefixLength $MaskBits
+
+ #Aston
+
+ $adapter = Get-NetAdapter | ? {$_.Name -eq "Aston"}
+ $IP = "192.168.255.254"
+ $adapter | Set-NetIPInterface -Dhcp Enabled
+
+#DNS Conf for all InterfaceAlias
+foreach ($c in Get-NetAdapter) { write-host 'Setting DNS for' $c.interfaceName ; Set-DnsClientServerAddress -InterfaceIndex $c.interfaceindex -ServerAddresses ('9.9.9.9') }
+
 
 # Install Routing and necessary linked roles
 Install-WindowsFeature RemoteAccess, RSAT-RemoteAccess-PowerShell, Routing -IncludeManagementTools
-set-service RemoteAccess -StartupType Automatic
-Start-Service RemoteAccess
-
-netsh interface ip set address "WAN" static 192.168.255.254 255.255.255.0
-netsh interface ip set dns name="WAN" static 9.9.9.9
-
-# Activate NAT
-
-netsh routing ip nat install
-netsh routing ip nat add interface name="WAN" mode=PRIVATE
-netsh routing ip nat add interface name="Aston" mode=FULL
-
-# Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
 
+#Install VPN
+echo "Install-remoteAccess -VpnType Vpn"
+Install-remoteAccess -VpnType Vpn
+Set-NetConnectionProfile -NetworkCategory Private
 $Params = @{
 	"Name"   = 'vm-monitoring-icmpv4'
 	"Action"        = 'Allow'
@@ -36,12 +55,26 @@ $Params = @{
 
 Set-NetFirewallRule @Params
 
+set-service RemoteAccess -StartupType Automatic
+Start-Service RemoteAccess
+
+netsh -f ./WAN.conf
+
 Set-NetConnectionProfile -networkcategory private
 
+# Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
+$Params = @{
+	"Name"   = 'vm-monitoring-icmpv4'
+	"Action"        = 'Allow'
+}
+
+Set-NetFirewallRule @Params
 
 # Add routes
 
 route add -p 192.168.8.0/24 192.168.255.8
 route add -p 192.168.12.0/24 192.168.255.8
 route add -p 192.168.128.0/24 192.168.255.128
-route add -p 192.168.255.0/24 192.168.255.254
+route add -p 0.0.0.0/0 192.168.255.254
+
+Read-Host "Finished???"

Guests/RTR-03_Old.ps1

@@ -0,0 +1,47 @@
+# Alexandre SIMAO
+# GPLv3
+
+### TODO ?
+
+# Script to install and configure a Fuckdows Server 2016 as a router
+# RTR-03 Only
+echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"
+
+# Change the poor machine name
+Rename-computer "RTR-03"
+
+Rename-NetAdapter -Name "Ethernet" -NewName "WAN"
+Rename-NetAdapter -Name "Ethernet 2" -NewName "Aston"
+
+# Install Routing and necessary linked roles
+Install-WindowsFeature RemoteAccess, RSAT-RemoteAccess-PowerShell, Routing -IncludeManagementTools
+set-service RemoteAccess -StartupType Automatic
+Start-Service RemoteAccess
+
+netsh interface ip set address "WAN" static 192.168.255.254 255.255.255.0
+netsh interface ip set dns name="WAN" static 9.9.9.9
+
+# Activate NAT
+
+netsh routing ip nat install
+netsh routing ip nat add interface name="WAN" mode=PRIVATE
+netsh routing ip nat add interface name="Aston" mode=FULL
+
+# Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
+
+$Params = @{
+	"Name"   = 'vm-monitoring-icmpv4'
+	"Action"        = 'Allow'
+}
+
+Set-NetFirewallRule @Params
+
+Set-NetConnectionProfile -networkcategory private
+
+
+# Add routes
+
+route add -p 192.168.8.0/24 192.168.255.8
+route add -p 192.168.12.0/24 192.168.255.8
+route add -p 192.168.128.0/24 192.168.255.128
+route add -p 192.168.255.0/24 192.168.255.254

Host/Infra-Standard.ps1

@@ -71,7 +71,7 @@ New-VM @vms
 Set-VMMemory RTR-03 -DynamicMemoryEnabled $true -MinimumBytes 512MB -StartupBytes 1024MB -MaximumBytes 2GB
 
 $vmadapter = Get-VMNetworkAdapter -VMName "RTR-02"
-Add-VMNetworkAdapter -VMName "RTR-02" -SwitchName "Arc-CLI" -Name "Bou-LAN" -DeviceNaming on
+Add-VMNetworkAdapter -VMName "RTR-02" -SwitchName "Bou-LAN" -Name "Bou-LAN" -DeviceNaming on
 Add-VMNetworkAdapter -VMName "RTR-02" -SwitchName "WAN" -Name "WAN" -DeviceNaming on
 
 
@@ -90,8 +90,6 @@ $vms = @{
     Generation = '2'
     MemoryStartupBytes = 1024Mb
     VHDPath = "d:\VHD\$VMName.vhdx"
-    SwitchName = 'WAN'
-
 }
 
 New-VM @vms