Fix: Del on-link routes

Guests/RTR-01.ps1

@@ -101,9 +101,6 @@ Set-NetFirewallRule @Params
 
 # Add routes
 
-route add -p 192.168.8.0/24 192.168.8.254
-route add -p 192.168.12.0/24 192.168.12.254
-route add -p 192.168.255.0/24 192.168.255.8
 route add -p 192.168.128.8/24 192.168.255.128
 route add -p 0.0.0.0/0 192.168.255.254
 

Guests/RTR-02_OLD.ps1

@@ -0,0 +1,64 @@
+# Alexandre SIMAO
+# GPLv3
+
+# Script to install and configure a Fuckdows Server 2016 as a router
+# RTR-02 Only
+
+echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"
+
+# Change the poor machine name
+Rename-computer "RTR-02"
+
+Rename-NetAdapter -Name "Ethernet" -NewName "Bou-LAN"
+Rename-NetAdapter -Name "Ethernet 2" -NewName "WAN"
+
+netsh interface ip set address "WAN" static 192.168.255.8 255.255.255.0 192.168.255.254
+netsh interface ip set address "Bou-LAN" static 192.168.128.254 255.255.255.0
+netsh interface ip set dns name="WAN" static 9.9.9.9.
+
+# Install Routing and necessary linked roles
+Install-WindowsFeature RemoteAccess, RSAT-RemoteAccess-PowerShell, Routing -IncludeManagementTools
+set-service RemoteAccess -StartupType Automatic
+Start-Service RemoteAccess
+
+# Display interfaces and active forwarding for all of thm via Regedit
+netsh inter show inter
+
+
+Set-NetConnectionProfile -NetworkCategory Private
+
+$Params = @{
+	"Name"   = 'vm-monitoring-icmpv4'
+	"Action"        = 'Allow'
+}
+
+Set-NetFirewallRule @Params
+
+# Activate NAT and DHCP Relay
+netsh routing ip relay install
+
+netsh routing ip add interface name="WAN" state=enable
+
+netsh routing ip relay add interface "WAN"
+netsh rout ip rel set int ARC-CLI min=0
+netsh routing ip relay add interface "Bou-LAN"
+netsh rout ip rel set int ARC-SRV min=0
+
+
+netsh -f ./Bou-LAN.conf
+
+# Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
+$Params = @{
+	"Name"   = 'vm-monitoring-icmpv4'
+	"Action"        = 'Allow'
+}
+
+Set-NetFirewallRule @Params
+
+# Add routes
+
+route add -p 192.168.8.0/24 192.168.255.8
+route add -p 192.168.12.0.24 192.168.255.8
+route add -p 192.168.255.0/24 192.168.255.128
+route add -p 192.168.128.0/24 192.168.128.254
+route add -p 0.0.0.0/0 192.168.255.254

Guests/SRV-01_DHCP.ps1

@@ -10,6 +10,14 @@ echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"
 #Rename this piece of garbage
 Rename-computer "SRV-1"
 
+# Rename interfaces
+
+$adapts = Get-NetAdapter
+foreach ($adapt in $adapts) {
+$HVName = (Get-NetAdapterAdvancedProperty -name $adapt.name -DisplayName "Hyper-v Network Adapter Name").DisplayValue
+Rename-Netadapter -name $adapt.name -NewName $HVName
+}
+
 # Set IP for pre-defined MAC addresses
 
 $adapter = Get-NetAdapter | ? {$_.Name -eq "Arc-SRV"}
@@ -18,7 +26,6 @@ $adapter = Get-NetAdapter | ? {$_.Name -eq "Arc-SRV"}
 $IP = "192.168.8.1"
 $MaskBits = 24 # This means subnet mask = 255.255.255.0
 $Gateway = "192.168.8.254"
-$Dns = "9.9.9.9"
 $IPType = "IPv4"
 
 $adapter | New-NetIPAddress `
@@ -27,6 +34,9 @@ $adapter | New-NetIPAddress `
  -PrefixLength $MaskBits `
  -DefaultGateway $Gateway
 
+# Set DNS
+
+foreach ($c in Get-NetAdapter) { write-host 'Setting DNS for' $c.interfaceName ; Set-DnsClientServerAddress -InterfaceIndex $c.interfaceindex -ServerAddresses ('9.9.9.9') }
 
 # Install the DHCP role (Management tools if you love Metrosexual UI)
 Install-WindowsFeature DHCP -IncludeManagementTools
@@ -86,9 +96,9 @@ route add -p 0.0.0.0/0 192.168.8.254
 # Change DHCP server options
 
 Set-DhcpServerv4OptionValue -ScopeId 192.168.128.0 -OptionID 3 -Value 192.168.128.254
-Set-DhcpServerv4OptionValue -ScopeId 192.168.8.0 -DnsServer 9.9.9.9
+Set-DhcpServerv4OptionValue -ScopeId 192.168.128.0 -DnsServer 9.9.9.9
 Set-DhcpServerv4OptionValue -ScopeId 192.168.12.0 -OptionID 3 -Value 192.168.12.254
-Set-DhcpServerv4OptionValue -ScopeId 192.168.8.0 -DnsServer 9.9.9.9
+Set-DhcpServerv4OptionValue -ScopeId 192.168.12.0 -DnsServer 9.9.9.9
 Set-DhcpServerv4OptionValue -ScopeId 192.168.8.0 -OptionID 3 -Value 192.168.8.254
 Set-DhcpServerv4OptionValue -ScopeId 192.168.8.0 -DnsServer 9.9.9.9
 

Host/Infra-Standard.ps1

@@ -7,7 +7,6 @@ echo "CC BY-NC-SA 4.0"
 
 # Region SRV-01
 
-
 cp D:\VHD\Base_dif\Base_server_g2.vhdx D:\VHD\SRV-01.vhdx
 
 Mount-VHD d:\VHD\SRV-01.vhdx
@@ -20,14 +19,12 @@ $vms = @{
     Generation = '2'
     MemoryStartupBytes = 1024Mb
     VHDPath = "d:\VHD\$VMName.vhdx"
-    SwitchName = 'Arc-SRV'
-
 }
 
 New-VM @vms
 Set-VMMemory SRV-01 -DynamicMemoryEnabled $true -MinimumBytes 512MB -StartupBytes 1024MB -MaximumBytes 2GB
 $vmadapter = Get-VMNetworkAdapter -VMName "SRV-01"
-Set-VMNetworkAdapter -VMNetworkAdapter $vmadapter[0] -StaticMacAddress 00155D027000
+Add-VMNetworkAdapter -VMName "SRV-01" -SwitchName "Arc-SRV" -Name "Arc-SRV" -DeviceNaming on
 
 # RTR-01
 
@@ -67,16 +64,15 @@ $vms = @{
     Generation = '2'
     MemoryStartupBytes = 1024Mb
     VHDPath = "d:\VHD\$VMName.vhdx"
-    SwitchName = 'Bou-LAN'
  }
 
 New-VM @vms
 
 Set-VMMemory RTR-03 -DynamicMemoryEnabled $true -MinimumBytes 512MB -StartupBytes 1024MB -MaximumBytes 2GB
 
-$vmadapter = Get-VMNetworkAdapter -VMName "RTR-01"
+$vmadapter = Get-VMNetworkAdapter -VMName "RTR-02"
-Set-VMNetworkAdapter -VMNetworkAdapter $vmadapter[0] -StaticMacAddress 00155D027004
+Add-VMNetworkAdapter -VMName "RTR-02" -SwitchName "Arc-CLI" -Name "Bou-LAN" -DeviceNaming on
-Add-VMNetworkAdapter -VMName RTR-02 -SwitchName "WAN" -StaticMacAddress 00155D027005
+Add-VMNetworkAdapter -VMName "RTR-02" -SwitchName "WAN" -Name "WAN" -DeviceNaming on
 
 
 # RTR-03
@@ -102,9 +98,9 @@ New-VM @vms
 
 Set-VMMemory RTR-03 -DynamicMemoryEnabled $true -MinimumBytes 512MB -StartupBytes 1024MB -MaximumBytes 2GB
 
-$vmadapter = Get-VMNetworkAdapter -VMName "RTR-01"
+$vmadapter = Get-VMNetworkAdapter -VMName "RTR-03"
-Set-VMNetworkAdapter -VMNetworkAdapter $vmadapter[0] -StaticMacAddress 00155D027006
+Add-VMNetworkAdapter -VMName "RTR-03" -SwitchName "Aston" -Name "Aston" -DeviceNaming on
-Add-VMNetworkAdapter -VMName RTR-03 -SwitchName "Aston" -StaticMacAddress 00155D027007
+Add-VMNetworkAdapter -VMName "RTR-03" -SwitchName "WAN" -Name "WAN" -DeviceNaming on
 
 
 Start-VM -Name RTR*