Aston-HyperV-Code/Guests/SRV-01.ps1
2021-05-10 17:24:51 +02:00

127 lines
4.1 KiB
PowerShell

# Alexandre Simao
# GPL v3
# SRV-01 ONLY
# TODO : exclusion/attribution fields
# Rename interfaces
#
echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"
### Rename this piece of garbage
echo "Changing Computer's name"
Rename-computer "SRV-1"
# End
### Rename interfaces by parsing VM device name
echo "Renaming adapters"
$adapts = Get-NetAdapter
foreach ($adapt in $adapts) {
$HVName = (Get-NetAdapterAdvancedProperty -name $adapt.name -DisplayName "Hyper-v Network Adapter Name").DisplayValue
Rename-Netadapter -name $adapt.name -NewName $HVName
}
#End
# Pausing to let things settle
echo "Sleeping 10s"
Sleep 10
### Général IP configure
# echo "IP configuration"
#Arc-SRV
netsh interface ip set address name="Arc-SRV" static 192.168.8.1 255.255.255.0 192.168.8.255
### DNS Conf for all InterfaceAlias ###
echo "DNS Conf"
foreach ($c in Get-NetAdapter) { write-host 'Setting DNS for' $c.interfaceName ; Set-DnsClientServerAddress -InterfaceIndex $c.interfaceindex -ServerAddresses ('9.9.9.9') }
### Install the DHCP role (Management tools if you love Metrosexual UI)
echo "Installing DHCP role"
Install-WindowsFeature DHCP -IncludeManagementTools
#END
### Setting connection as Private
echo "Setting connection as Private"
Set-NetConnectionProfile -NetworkCategory Private
### Create DHCP "security" groups
echo "Creating DHCP security groups"
netsh dhcp add securitygroups
#END
### Restart the DHCP server
echo "Restarting DHCP server"
Restart-Service dhcpserver
# END
###################Template#######################
#Add-DhcpServerv4Scope -name "Corpnet" -StartRange 10.0.0.1 -EndRange 10.0.0.254 -SubnetMask 255.255.255.0 -State Active
#Add-DhcpServerv4ExclusionRange -ScopeID 10.0.0.0 -StartRange 10.0.0.1 -EndRange 10.0.0.15
#Set-DhcpServerv4OptionValue -OptionID 3 -Value 10.0.0.1 -ScopeID 10.0.0.0 -ComputerName DHCP1.corp.contoso.com
#Set-DhcpServerv4OptionValue -DnsDomain corp.contoso.com -DnsServer 10.0.0.2
##################################################
### Create DHCP Scopes For Arc-CLI Arc-SRV Bou-Lan
echo "Create DHCP Scopes For Arc-CLI Arc-SRV Bou-Lan"
Add-DhcpServerv4Scope -name "Arc-SRV" -StartRange 192.168.8.1 -EndRange 192.168.8.254 -SubnetMask 255.255.255.0 -State Active
Add-DhcpServerv4ExclusionRange -ScopeID 192.168.8.0 -StartRange 192.168.8.1 -EndRange 192.168.8.63
Add-DhcpServerv4ExclusionRange -ScopeID 192.168.8.0 -StartRange 192.168.8.240 -EndRange 192.168.8.254
Add-DhcpServerv4Scope -name "Arc-CLI" -StartRange 192.168.12.1 -EndRange 192.168.12.254 -SubnetMask 255.255.255.0 -State Active
Add-DhcpServerv4ExclusionRange -ScopeID 192.168.12.0 -StartRange 192.168.12.1 -EndRange 192.168.12.63
Add-DhcpServerv4ExclusionRange -ScopeID 192.168.12.0 -StartRange 192.168.12.240 -EndRange 192.168.12.254
Add-DhcpServerv4Scope -name "Bou-LAN" -StartRange 192.168.128.1 -EndRange 192.168.128.254 -SubnetMask 255.255.255.0 -State Active
Add-DhcpServerv4ExclusionRange -ScopeID 192.168.128.0 -StartRange 192.168.128.1 -EndRange 192.168.128.63
Add-DhcpServerv4ExclusionRange -ScopeID 192.168.128.0 -StartRange 192.168.128.240 -EndRange 192.168.128.254
#END
### Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
echo "Allowing ICMPv4 probes"
$Params = @{
"Name" = 'vm-monitoring-icmpv4'
"Action" = 'Allow'
}
Set-NetFirewallRule @Params
# END
### Add routes for RTR-01
echo "Add routes for RTR-01"
route add -p 192.168.12.0/24 192.168.8.254
route add -p 192.168.255.0/24 192.168.8.254
route add -p 192.168.128.0/24 192.168.8.254
route add -p 0.0.0.0/0 192.168.8.254
# END
### Change DHCP server options
echo "Adding DHCP server options"
Set-DhcpServerv4OptionValue -ScopeId 192.168.128.0 -Router 192.168.128.254
Set-DhcpServerv4OptionValue -ScopeId 192.168.12.0 -Router 192.168.12.254
Set-DhcpServerv4OptionValue -ScopeId 192.168.8.0 -Router 192.168.8.254
#Set-DhcpServerv4OptionValue -ScopeId 192.168.8.0 -DnsServer 9.9.9.9
Get-DhcpServerv4Scope | Set-DhcpServerv4OptionValue -DnsServer 9.9.9.9
Read-Host "Finished?"
Restart-Computer