Closing the fd means the inode number may be reused immediately
by a new file, so we have to get the old fileID out of the table
beforehand!
Hopefully fixes https://github.com/rfjakob/gocryptfs/issues/363
This adds support for gitignore-like wildcards and exclude patters in
reverse mode. It (somewhat) fixes#273: no regexp support, but the
syntax should be powerful enough to satisfy most needs.
Also, since adding a lot of --exclude options can be tedious, it adds
the --exclude-from option to read patterns from a file (or files).
This fixed the "Permission denied" bug, but still has the problem that
the directory may be replaced behind our back. Mitigated by the fact
that we skip the workaround when running as root with -allow_other.
https://github.com/rfjakob/gocryptfs/issues/354
For Linux, everything effectively stays the same. For both path-based and
fd-based Utimens() calls, we use unix.UtimesNanoAt(). To avoid introducing
a separate syscall wrapper for futimens() (as done in go-fuse, for example),
we instead use the /proc/self/fd - trick.
On macOS, this changes quite a lot:
* Path-based Utimens() calls were previously completely broken, since
unix.UtimensNanoAt() ignores the passed file descriptor. Note that this
cannot be fixed easily since there IS no appropriate syscall available on
macOS prior to High Sierra (10.13). We emulate this case by using
Fchdir() + setattrlist().
* Fd-based Utimens() calls were previously translated to f.GetAttr() (to
fill any empty parameters) and syscall.Futimes(), which does not does
support nanosecond precision. Both issues can be fixed by switching to
fsetattrlist().
Fixes https://github.com/rfjakob/gocryptfs/issues/350
The only call forwarded to loopbackFileSystem was Statfs,
which is trivial to implement.
Implement it and drop loopbackFileSystem, as having it carries the
risk that a coding error bypasses the usual encryption/decryption
chain.
Instead of manually adjusting the user after creating the symlink,
adjust effective permissions and let the kernel deal with it.
Related to https://github.com/rfjakob/gocryptfs/issues/338.
Instead of manually adjusting the user and mode after creating the
device file, adjust effective permissions and let the kernel deal
with it.
Related to https://github.com/rfjakob/gocryptfs/issues/338.
The current code has a risk of race-conditions, since we pass a path
containing "/" to Fchownat. We could fix this by opening a file descriptor,
however, this does not seem worth the effort. We also don't chown *.name files.
Make sure that the directory belongs to the correct owner before users
can access it. For directories with SUID/SGID mode, there is a risk of
race-conditions when files are created before the correct owner is set.
They will then inherit the wrong user and/or group.
See https://github.com/rfjakob/gocryptfs/issues/327 for more details.
Reported by @slackner at https://github.com/rfjakob/gocryptfs/issues/327 :
Possible race-conditions between file creation and Fchownat
* Assume a system contains a gocryptfs mount as root user
with -allow_other
* As a regular user create a new file with mode containing
the SUID flag and write access for other users
* Before gocryptfs executes the Fchownat call, try to open
the file again, write some exploit code to it, and try to run it.
For a short time, the file is owned by root and has the SUID flag, so
this is pretty dangerous.
The files are apparently processed in alphabetic order, so cli_args.go is
processed before main.go. In order to run before the go-fuse imports, put
the 'ensure fds' code in a separate package. Debug messages are omitted
to avoid additional imports (that might contain other code messing up our
file descriptors).
Setting/removing extended attributes on directories was partially fixed with
commit eff35e60b6. However, on most file systems
it is also possible to do these operations without read access (see tests).
Since we cannot open a write-access fd to a directory, we have to use the
/proc/self/fd trick (already used for ListXAttr) for the other operations aswell.
For simplicity, let's separate the Linux and Darwin code again (basically revert
commit f320b76fd1), and always use the
/proc/self/fd trick on Linux. On Darwin we use the best-effort approach with
openBackingFile() as a fallback.
More discussion about the available options is available in
https://github.com/rfjakob/gocryptfs/issues/308.
We alread have this warning in Open(), but xfstests generic/488
causes "too many open files" via Create. Add the same message so
the user sees what is going on.
When the old size is zero, there are no existing blocks to merge the
new data with. Directly use Ftruncate if the size is block-aligned.
Fixes https://github.com/rfjakob/gocryptfs/issues/305
Bug looked like this:
$ ls -l .
total 0
drwxrwxr-x. 2 jakob jakob 60 Jan 3 15:42 foo
-rw-rw-r--. 1 jakob jakob 0 Jan 3 15:46 x
$ ls -l .
ls: cannot access '.': No such file or directory
(only happened when "" was in the dirCache)
This function is in all fastpaths, will get a cache, and needs
its own file.
renamed: internal/fusefrontend/names.go -> internal/fusefrontend/openbackingdir.go
renamed: internal/fusefrontend/names_test.go -> internal/fusefrontend/openbackingdir_test.go
An Open() a fifo blocks until it is opened for writing.
This meant that xattr operations on FIFOs would block.
Pass O_NONBLOCK to fix that, and add a test.
Failure was:
+ GOOS=darwin
+ GOARCH=amd64
+ go build -tags without_openssl
# github.com/rfjakob/gocryptfs/internal/fusefrontend
internal/fusefrontend/fs_dir.go:159:60: cannot use origMode | 448 (type uint16) as type uint32 in argument to syscallcompat.Fchmodat
internal/fusefrontend/fs_dir.go:170:33: cannot use origMode (type uint16) as type uint32 in argument to syscallcompat.Fchmodat
Use openBackingDir() and Fstatat().
High performance impact, though part of it should be
mitigated by adding DirIV caching to the new code paths.
$ ./benchmark.bash
Testing gocryptfs at /tmp/benchmark.bash.Eou: gocryptfs v1.6-37-ge3914b3-dirty; go-fuse v20170619-66-g6df8ddc; 2018-10-14 go1.11
WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.2289 s, 213 MB/s
READ: 262144000 bytes (262 MB, 250 MiB) copied, 1.02616 s, 255 MB/s
UNTAR: 24.490
MD5: 13.120
LS: 3.368
RM: 9.232
The directory was already created, so return success even if Fchownat fails.
The same error handling is already used if fs.args.PlaintextNames is false.
Even though filesystem notifications aren't implemented for FUSE, I decided to
try my hand at implementing the autounmount feature (#128). I based it on the
EncFS autounmount code, which records filesystem accesses and checks every X
seconds whether it's idled long enough to unmount.
I've tested the feature locally, but I haven't added any tests for this flag.
I also haven't worked with Go before. So please let me know if there's
anything that should be done differently.
One particular concern: I worked from the assumption that the open files table
is unique per-filesystem. If that's not true, I'll need to add an open file
count and associated lock to the Filesystem type instead.
https://github.com/rfjakob/gocryptfs/pull/265
Error was:
# github.com/rfjakob/gocryptfs/internal/fusefrontend
internal/fusefrontend/fs.go:179: cannot use perms | 256 (type uint16) as type uint32 in argument to syscall.Fchmod
internal/fusefrontend/fs.go:185: cannot use perms (type uint16) as type uint32 in argument to syscall.Fchmod
Rename openBackingPath to openBackingDir and use OpenDirNofollow
to be safe against symlink races. Note that openBackingDir is
not used in several important code paths like Create().
But it is used in Unlink, and the performance impact in the RM benchmark
to be acceptable:
Before
$ ./benchmark.bash
Testing gocryptfs at /tmp/benchmark.bash.bYO: gocryptfs v1.6-12-g930c37e-dirty; go-fuse v20170619-49-gb11e293; 2018-09-08 go1.10.3
WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.07979 s, 243 MB/s
READ: 262144000 bytes (262 MB, 250 MiB) copied, 0.882413 s, 297 MB/s
UNTAR: 16.703
MD5: 7.606
LS: 1.349
RM: 3.237
After
$ ./benchmark.bash
Testing gocryptfs at /tmp/benchmark.bash.jK3: gocryptfs v1.6-13-g84d6faf-dirty; go-fuse v20170619-49-gb11e293; 2018-09-08 go1.10.3
WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.06261 s, 247 MB/s
READ: 262144000 bytes (262 MB, 250 MiB) copied, 0.947228 s, 277 MB/s
UNTAR: 17.197
MD5: 7.540
LS: 1.364
RM: 3.410
As uncovered by xfstests generic/465, concurrent reads and writes
could lead to this,
doRead 3015532: corrupt block #1039: stupidgcm: message authentication failed,
as the read could pick up a block that has not yet been completely written -
write() is not atomic!
Now writes take ContentLock exclusively, while reads take it shared,
meaning that multiple reads can run in parallel with each other, but
not with a write.
This also simplifies the file header locking.
xfstests generic/083 fills the filesystem almost completely while
running fsstress in parallel. In fsck, these would show up:
readFileID 2580: incomplete file, got 18 instead of 19 bytes
This could happen when writing the file header works, but writing
the actual data fails.
Now we kill the header again by truncating the file to zero.
If the underlying filesystem is full, it is normal get ENOSPC here.
Log at Info level instead of Warning.
Fixes xfstests generic/015 and generic/027, which complained about
the extra output.
O_DIRECT accesses must be aligned in both offset and length. Due to our
crypto header, alignment will be off, even if userspace makes aligned
accesses. Running xfstests generic/013 on ext4 used to trigger lots of
EINVAL errors due to missing alignment. Just fall back to buffered IO.
"gocryptfs -fsck" will need access to helper functions,
and to get that, it will need to cast a gofuse.File to a
fusefrontend.File. Make fusefrontend.File exported to make
this work.
We are clean again.
Warnings were:
internal/fusefrontend/fs.go:443:14: should omit type string from declaration
of var cTarget; it will be inferred from the right-hand side
internal/fusefrontend/xattr.go:26:1: comment on exported method FS.GetXAttr
should be of the form "GetXAttr ..."
internal/syscallcompat/sys_common.go:9:7: exported const PATH_MAX should have
comment or be unexported
Reading system.posix_acl_access and system.posix_acl_default
should return EOPNOTSUPP to inform user-space that we do not
support ACLs.
xftestest essientially does
chacl -l | grep "Operation not supported"
to determine if the filesystem supports ACLs, and used to
wrongly believe that gocryptfs does.
mv is unhappy when we return EPERM when it tries to set
system.posix_acl_access:
mv: preserving permissions for ‘b/x’: Operation not permitted
Now we return EOPNOTSUPP like tmpfs does and mv seems happy.
Values a binary-safe, there is no need to base64-encode them.
Old, base64-encoded values are supported transparently
on reading. Writing xattr values now always writes them binary.
We previously returned EPERM to prevent the kernel from
blacklisting our xattr support once we get an unsupported
flag, but this causes lots of trouble on MacOS:
Cannot save files from GUI apps, see
https://github.com/rfjakob/gocryptfs/issues/229
Returning ENOSYS triggers the dotfiles fallback on MacOS
and fixes the issue.
OpenDir and ListXAttr skip over corrupt entries,
readFileID treats files the are too small as empty.
This improves usability in the face of corruption,
but hides the problem in a log message instead of
putting it in the return code.
Create a channel to report these corruptions to fsck
so it can report them to the user.
Also update the manpage and the changelog with the -fsck option.
Closes https://github.com/rfjakob/gocryptfs/issues/191
This should not happen via FUSE as the kernel caps the size,
but with fsck we have the first user that calls Read directly.
For symmetry, check it for Write as well.
A few places have called tlog.Warn.Print, which directly
calls into log.Logger due to embedding, losing all features
of tlog.
Stop embedding log.Logger to make sure the internal functions
cannot be called accidentially and fix (several!) instances
that did.
Both fusefrontend and fusefrontend_reverse were doing
essentially the same thing, move it into main's
initFuseFrontend.
A side-effect is that we have a reference to cryptocore
in main, which will help with wiping the keys on exit
(https://github.com/rfjakob/gocryptfs/issues/211).
Now that we have Fstatat we can use it in Getdents to
get rid of the path name.
Also, add an emulated version of getdents for MacOS. This allows
to drop the !HaveGetdents special cases from fusefrontend.
Modify the getdents test to test both native getdents and the emulated
version.
In PlaintextNames mode the "gocryptfs.longname." prefix does not have any
special meaning. We should not attempt to delete any .name files.
Partially fixes https://github.com/rfjakob/gocryptfs/issues/174
This is already done in regular mode, but was missing when PlaintextNames mode
is enabled. As a result, symlinks created by non-root users were still owned
by root afterwards.
Fixes https://github.com/rfjakob/gocryptfs/issues/176
In PlaintextNames mode the "gocryptfs.longname." prefix does not have any
special meaning. We should not attempt to read the directory IV or to
create special .name files.
Partially fixes https://github.com/rfjakob/gocryptfs/issues/174
If the user manages to replace the directory with
a symlink at just the right time, we could be tricked
into chown'ing the wrong file.
This change fixes the race by using fchownat, which
unfortunately is not available on darwin, hence a compat
wrapper is added.
Scenario, as described by @slackner at
https://github.com/rfjakob/gocryptfs/issues/177 :
1. Create a forward mount point with `plaintextnames` enabled
2. Mount as root user with `allow_other`
3. For testing purposes create a file `/tmp/file_owned_by_root`
which is owned by the root user
4. As a regular user run inside of the GoCryptFS mount:
```
mkdir tempdir
mknod tempdir/file_owned_by_root p &
mv tempdir tempdir2
ln -s /tmp tempdir
```
When the steps are done fast enough and in the right order
(run in a loop!), the device file will be created in
`tempdir`, but the `lchown` will be executed by following
the symlink. As a result, the ownership of the file located
at `/tmp/file_owned_by_root` will be changed.
Fixes https://github.com/rfjakob/gocryptfs/issues/171
Steps to reproduce:
* Create a regular forward mount point
* Create a new directory in the mount point
* Manually delete the gocryptfs.diriv file from the corresponding ciphertext
directory
* Attempt to delete the directory with 'rmdir <dirname>'
Although the code explicitly checks for empty directories, it will still attempt
to move the non-existent gocryptfs.diriv file and fails with:
rmdir: failed to remove '<dirname>': No such file or directory
Fixes https://github.com/rfjakob/gocryptfs/issues/170
Steps to reproduce the problem:
* Create a regular forward mount point
* Create a file with a shortname and one with a long filename
* Try to run 'mv <shortname> <longname>'
This should actually work and replace the existing file, but instead it
fails with:
mv: cannot move '<shortname>' to '<longname>': File exists
The problem is the creation of the .name file. If the target already exists
we can safely ignore the EEXIST error and just keep the existing .name file.
Our byte cache pools are sized acc. to MAX_KERNEL_WRITE, but the
running kernel may have a higher limit set. Clamp to what we can
handle.
Fixes a panic on a Synology NAS reported at
https://github.com/rfjakob/gocryptfs/issues/145
MacOS creates lots of these files, and if the directory is otherwise
empty, we would throw an IO error to the unsuspecting user.
With this patch, we log a warning, but otherwise pretend we did not
see it.
Mitigates https://github.com/rfjakob/gocryptfs/issues/140
