Commit Graph

61 Commits

Author SHA1 Message Date
Jakob Unterwurzacher
17f0eb1339 Convert logging to standard Go log.Logger
This is in preparation of logging to syslog.
2016-01-20 20:57:00 +01:00
Jakob Unterwurzacher
236970adee OSX: Fix build failure caused by syntax errors 2016-01-09 13:04:48 +01:00
Jakob Unterwurzacher
f93729f20d Disable fallocate on OSX (not available and causes a build failure) 2016-01-07 21:39:41 +01:00
Jakob Unterwurzacher
1caa925868 Increase GCM IV size from 96 to 128 bits
This pushes back the birthday bound for collisions to make it virtually
irrelevant.
2015-12-19 15:02:29 +01:00
Jakob Unterwurzacher
88826dc51d diriv: handle directory rename over directory
If an empty directory is overwritten we will always get
ENOTEMPTY as the "empty" directory will still contain gocryptfs.diriv.
Handle that case by removing the target directory and trying again.

Fixes issue #10
2015-12-19 13:21:15 +01:00
Jakob Unterwurzacher
00a712b4d1 go fmt
...and minimal comment changes.
2015-12-13 20:24:13 +01:00
Jakob Unterwurzacher
8518d6d7bd Handle EINTR returned by Fallocate
Fallocate can return EINTR (interrupted system call) and does so
quite often when cpu profiling is enabled.
2015-12-13 17:17:01 +01:00
Jakob Unterwurzacher
e99e841713 Rmdir: handle creating and removing unreadable directories
This patch also splits off Mkdir and Rmdir into its own file.

Fixes issue #8, thanks to @diseq for the bug report.
2015-12-11 20:02:12 +01:00
Jakob Unterwurzacher
ccf6d00728 Add missing PlaintextNames checks in OpenDir, Mkdir, Rmdir, initDir
Plaintextnames support has bitrotted during the DirIV additions,
this needs test cases. Will be added in a future patch.

Fixes issue #9.
2015-12-10 01:12:05 +01:00
Jakob Unterwurzacher
c6dacd6f91 Add EME filename encryption & enable it by default 2015-12-08 16:17:04 +01:00
Jakob Unterwurzacher
ff8c81f95b go fmt 2015-12-08 13:51:06 +01:00
Jakob Unterwurzacher
56888d83dd fallocate the space needed for the file header beforehand
This makes sure writing to a file fails early if the underlying
filesystem does not support fallocate. It also prevents partial header
write due to ENOSPC.
2015-12-06 15:05:52 +01:00
Jakob Unterwurzacher
edc289fb75 Fix rename, was broken broken by DirIV introduction
As it was, CIPHERDIR was prepended twice, causing every rename
to fail with ENOENT.
2015-12-06 15:00:54 +01:00
Jakob Unterwurzacher
ce42a6f23d Run go fmt 2015-11-29 21:55:20 +01:00
Jakob Unterwurzacher
20b058a333 Add single-element cache for DirIV lookup
Another 3x performance boost for applications that walk the
directory tree.

Excerpt from performance.txt:

VERSION         UNTAR    LS     RM
v0.4               48     1.5    5
v0.5-rc1           56     7     19
v0.5-rc1-1         54     4.1    9
v0.5-rc1-2         45     1.7	 3.4  <---- THIS VERSION
2015-11-29 21:41:38 +01:00
Jakob Unterwurzacher
1d0a442405 OpenDir performance: Read DirIV once and reuse it for all names
Formerly, we called decryptPath for every name.
That resulted in a directory walk that reads in all diriv files
on the way.

Massive improvement for RM and LS (check performance.txt for details)

VERSION         UNTAR   RM   LS
v0.4               48    5    1.5
v0.5-rc1           56   19    7
v0.5-rc1-1         54    9    4.1   <---- THIS VERSION
2015-11-29 20:03:37 +01:00
Jakob Unterwurzacher
1fb349e97b diriv: also support old CBC symlink 2015-11-28 18:39:45 +01:00
Jakob Unterwurzacher
01141f8b5e diriv: fix Symlink() and Readlink()
Both were missing adaptions for diriv usage resulting in broken
functionality
2015-11-28 18:39:45 +01:00
Jakob Unterwurzacher
3b2143bafc diriv: fix readdir
It decrypted all file names using the root directory iv
2015-11-28 18:39:45 +01:00
Jakob Unterwurzacher
fe7355f9ee diriv: use "DirIV" flag to discern and support mounting old filesystems 2015-11-28 18:38:06 +01:00
Jakob Unterwurzacher
a04a92cdab Run go fmt 2015-11-27 22:20:01 +01:00
Jakob Unterwurzacher
bdd9249a52 diriv: Move WriteDirIV() to cryptfs; add locking to Mkdir, Rmdir 2015-11-27 21:48:58 +01:00
Jakob Unterwurzacher
decfc1ab79 diriv: Convert filename encryption users to diriv 2015-11-27 00:03:10 +01:00
Jakob Unterwurzacher
fe2fcf6c16 diriv: Transactionally delete gocryptfs.diriv in Rmdir 2015-11-25 22:17:42 +01:00
Jakob Unterwurzacher
4d466c3412 diriv: Create gocryptfs.diriv in every directory 2015-11-25 20:57:16 +01:00
Jakob Unterwurzacher
61aacb5c1b Run go fmt and go vet 2015-11-14 17:16:17 +01:00
Jakob Unterwurzacher
99dfc84992 Add "-q" (quiet) flag 2015-11-09 22:33:42 +01:00
Jakob Unterwurzacher
fa3a382aa4 Handle ENOSPC errors better by preallocating the space before writing
Prevent the case that we run out of space in the middle of
writing a block - that would leave a corrupt block behind.
2015-11-08 22:36:29 +01:00
Jakob Unterwurzacher
050005fd7b Centralize path filter decision in CryptFS.IsFiltered() 2015-11-03 22:25:29 +01:00
Jakob Unterwurzacher
de56fe9e35 Implement PlainTextNames mode
Also, forbid access to "gocryptfs.conf" in the root dir.
2015-11-03 00:00:13 +01:00
Jakob Unterwurzacher
e31d319c39 Remove code detected by "deadcode"
go get github.com/remyoudompheng/go-misc/deadcode
2015-11-01 12:32:10 +01:00
Jakob Unterwurzacher
902babdf22 Refactor ciphertext <-> plaintext offset translation functions
Move all the intelligence into the new file address_translation.go.
That the calculations were spread out too much became apparent when adding
the file header. This should make the code much easier to modify in the
future.
2015-11-01 12:11:36 +01:00
Jakob Unterwurzacher
76311b60f2 Add file header (on-disk-format change)
Format: [ "Version" uint16 big endian ] [ "Id" 16 random bytes ]

Quoting SECURITY.md:

* Every file has a header that contains a 16-byte random *file id*
* Each block uses the file id and its block number as GCM *authentication data*
 * This means the position of the blocks is protected as well. The blocks
   can not be reordered or copied between different files without
   causing an decryption error.
2015-11-01 01:38:27 +01:00
Jakob Unterwurzacher
a3d286069f Use block number as authentication data 2015-10-06 22:27:37 +02:00
Jakob Unterwurzacher
aa082c235a Utimens: Use UtimesNano instead of Futimes
Futimes() only takes microsecond resolution while the FUSE call
Utimens() wants nanosecond precision.

This is why UTIME_OMIT did not work - this change fixes the
xfstests generic/258 test failure.

The go library does not provide a FutimesNano() function which is
why I use UtimesNano() on /proc/self/fd/n.
This is what the Go library does in Futimes().
2015-10-04 20:32:15 +02:00
Jakob Unterwurzacher
c7313f36de fallocate: return ENOSYS
The implementation was incomplete, disable fallocate completely for now.
See https://github.com/rfjakob/gocryptfs/issues/1

Fixes xfstests generic/075
2015-10-04 17:14:40 +02:00
Jakob Unterwurzacher
90bd978283 truncate: Fix bug that caused xfstests generic/030 to fail
The bug was caused by using cipherOff where plainOff should
have been used.
Renamed the symbols for less confusion.
2015-10-04 16:04:25 +02:00
Jakob Unterwurzacher
aa6fa7f3cf Truncate: Logging improvements, show number of blocks as float 2015-10-04 15:45:46 +02:00
Jakob Unterwurzacher
b27edba2bb Fix Trucate() bug causing files to be too small
Uncovered by running xfstests generic/014 several times
2015-10-04 15:40:59 +02:00
Jakob Unterwurzacher
89fef80d32 Run go fmt 2015-10-04 14:49:47 +02:00
Jakob Unterwurzacher
c859f0b2dc intraBlock: Rename Offset to Skip
"Offset" is unclear whether it is an offset from the start of file
or start of block. "Skip" seems much better.
2015-10-04 14:24:43 +02:00
Jakob Unterwurzacher
775676ecb8 Utilize file hole passtrough capability in Truncate()
Cuts down the runtime of xfstests generic/014
from 1822 seconds to 36 seconds
2015-10-04 14:21:07 +02:00
Jakob Unterwurzacher
2003ca965d Zero-pad last block if a file hole is created on Write()
Fixes TestFileHoles test
2015-10-04 11:39:35 +02:00
Jakob Unterwurzacher
40448db909 Fix xfstests generic/030 failure
The actual fix is

	oldSize := f.cfs.PlainSize(uint64(fi.Size()))

the rest is logging improvements
2015-10-04 00:26:20 +02:00
Jakob Unterwurzacher
79870ab096 debug: log inode number instead of encrypted filename
Makes the log output smaller and more readable.
2015-10-03 19:16:34 +02:00
Jakob Unterwurzacher
3fef613591 tests: Add append test 2015-09-30 23:42:18 +02:00
Jakob Unterwurzacher
b835f83fd5 Implement Truncate() + Test 2015-09-30 22:36:53 +02:00
Jakob Unterwurzacher
aea8d8d6e7 debug: Log encrypted filename 2015-09-30 20:32:24 +02:00
Jakob Unterwurzacher
c4ec7a4295 Fix Chown parameter order 2015-09-19 10:46:39 +02:00
Jakob Unterwurzacher
67fe4557e5 Fix read benchmark 2015-09-17 22:08:49 +02:00