Now that we have Fstatat we can use it in Getdents to
get rid of the path name.
Also, add an emulated version of getdents for MacOS. This allows
to drop the !HaveGetdents special cases from fusefrontend.
Modify the getdents test to test both native getdents and the emulated
version.
In PlaintextNames mode the "gocryptfs.longname." prefix does not have any
special meaning. We should not attempt to delete any .name files.
Partially fixes https://github.com/rfjakob/gocryptfs/issues/174
This is already done in regular mode, but was missing when PlaintextNames mode
is enabled. As a result, symlinks created by non-root users were still owned
by root afterwards.
Fixes https://github.com/rfjakob/gocryptfs/issues/176
In PlaintextNames mode the "gocryptfs.longname." prefix does not have any
special meaning. We should not attempt to read the directory IV or to
create special .name files.
Partially fixes https://github.com/rfjakob/gocryptfs/issues/174
If the user manages to replace the directory with
a symlink at just the right time, we could be tricked
into chown'ing the wrong file.
This change fixes the race by using fchownat, which
unfortunately is not available on darwin, hence a compat
wrapper is added.
Scenario, as described by @slackner at
https://github.com/rfjakob/gocryptfs/issues/177 :
1. Create a forward mount point with `plaintextnames` enabled
2. Mount as root user with `allow_other`
3. For testing purposes create a file `/tmp/file_owned_by_root`
which is owned by the root user
4. As a regular user run inside of the GoCryptFS mount:
```
mkdir tempdir
mknod tempdir/file_owned_by_root p &
mv tempdir tempdir2
ln -s /tmp tempdir
```
When the steps are done fast enough and in the right order
(run in a loop!), the device file will be created in
`tempdir`, but the `lchown` will be executed by following
the symlink. As a result, the ownership of the file located
at `/tmp/file_owned_by_root` will be changed.
Fixes https://github.com/rfjakob/gocryptfs/issues/171
Steps to reproduce:
* Create a regular forward mount point
* Create a new directory in the mount point
* Manually delete the gocryptfs.diriv file from the corresponding ciphertext
directory
* Attempt to delete the directory with 'rmdir <dirname>'
Although the code explicitly checks for empty directories, it will still attempt
to move the non-existent gocryptfs.diriv file and fails with:
rmdir: failed to remove '<dirname>': No such file or directory
Fixes https://github.com/rfjakob/gocryptfs/issues/170
Steps to reproduce the problem:
* Create a regular forward mount point
* Create a file with a shortname and one with a long filename
* Try to run 'mv <shortname> <longname>'
This should actually work and replace the existing file, but instead it
fails with:
mv: cannot move '<shortname>' to '<longname>': File exists
The problem is the creation of the .name file. If the target already exists
we can safely ignore the EEXIST error and just keep the existing .name file.
Our byte cache pools are sized acc. to MAX_KERNEL_WRITE, but the
running kernel may have a higher limit set. Clamp to what we can
handle.
Fixes a panic on a Synology NAS reported at
https://github.com/rfjakob/gocryptfs/issues/145
MacOS creates lots of these files, and if the directory is otherwise
empty, we would throw an IO error to the unsuspecting user.
With this patch, we log a warning, but otherwise pretend we did not
see it.
Mitigates https://github.com/rfjakob/gocryptfs/issues/140
...and if Getdents is not available at all.
Due to this warning I now know that SSHFS always returns DT_UNKNOWN:
gocryptfs[8129]: Getdents: convertDType: received DT_UNKNOWN, falling back to Lstat
This behavoir is confirmed at http://ahefner.livejournal.com/16875.html:
"With sshfs, I finally found that obscure case. The dtype is always set to DT_UNKNOWN [...]"
Remove the "Masterkey" field from fusefrontend.Args because it
should not be stored longer than neccessary. Instead pass the
masterkey as a separate argument to the filesystem initializers.
Then overwrite it with zeros immediately so we don't have
to wait for garbage collection.
Note that the crypto implementation still stores at least a
masterkey-derived value, so this change makes it harder, but not
impossible, to extract the encryption keys from memory.
Suggested at https://github.com/rfjakob/gocryptfs/issues/137
Due to RMW, we always need read permissions on the backing file. This is a
problem if the file permissions do not allow reading (i.e. 0200 permissions).
This patch works around that problem by chmod'ing the file, obtaining a fd,
and chmod'ing it back.
Test included.
Issue reported at: https://github.com/rfjakob/gocryptfs/issues/125
Previously we ran through the decryption steps even for an empty
ciphertext slice. The functions handle it correctly, but returning
early skips all the extra calls.
Speeds up the tar extract benchmark by about 4%.
We use two levels of buffers:
1) 4kiB+overhead for each ciphertext block
2) 128kiB+overhead for each FUSE write (32 ciphertext blocks)
This commit adds a sync.Pool for both levels.
The memory-efficiency for small writes could be improved,
as we now always use a 128kiB buffer.
This fixes a few issues I have found reviewing the code:
1) Limit the amount of data ReadLongName() will read. Previously,
you could send gocryptfs into out-of-memory by symlinking
gocryptfs.diriv to /dev/zero.
2) Handle the empty input case in unPad16() by returning an
error. Previously, it would panic with an out-of-bounds array
read. It is unclear to me if this could actually be triggered.
3) Reject empty names after base64-decoding in DecryptName().
An empty name crashes emeCipher.Decrypt().
It is unclear to me if B64.DecodeString() can actually return
a non-error empty result, but let's guard against it anyway.
We do not have to track the writeOnly status because the kernel
will not forward read requests on a write-only FD to us anyway.
I have verified this behavoir manually on a 4.10.8 kernel and also
added a testcase.
Force decode of encrypted files even if the integrity check fails, instead of
failing with an IO error. Warning messages are still printed to syslog if corrupted
files are encountered.
It can be useful to recover files from disks with bad sectors or other corrupted
media.
Closes https://github.com/rfjakob/gocryptfs/pull/102 .
