25 KiB
% GOCRYPTFS(1) % github.com/rfjakob % Aug 2017
NAME
gocryptfs - create or mount an encrypted filesystem
SYNOPSIS
Initialize new encrypted filesystem
gocryptfs -init [OPTIONS] CIPHERDIR
Mount
gocryptfs [OPTIONS] CIPHERDIR MOUNTPOINT [-o COMMA-SEPARATED-OPTIONS]
Unmount
fusermount -u MOUNTPOINT
Change password
gocryptfs -passwd [OPTIONS] CIPHERDIR
Check consistency
gocryptfs -fsck [OPTIONS] CIPHERDIR
Show filesystem information
gocryptfs -info [OPTIONS] CIPHERDIR
DESCRIPTION
gocryptfs is an encrypted overlay filesystem written in Go. Encrypted files are stored in CIPHERDIR, and a plain-text view can be presented by mounting the filesystem at MOUNTPOINT.
gocryptfs was inspired by encfs(1) and strives to fix its security issues while providing good performance.
ACTION FLAGS
Unless one of the following action flags is passed, the default action is to mount a filesystem (see SYNOPSIS).
-fsck
Check CIPHERDIR for consistency. If corruption is found, the exit code is 26.
-h, -help
Print a short help text that shows the more-often used options.
-hh
Long help text, shows all available options.
-info
Pretty-print the contents of the config file in CIPHERDIR for human consumption, stripping out sensitive data.
Example:
$ gocryptfs -info my_cipherdir
Creator: gocryptfs v2.0-beta2
FeatureFlags: GCMIV128 HKDF DirIV EMENames LongNames Raw64
EncryptedKey: 64B
ScryptObject: Salt=32B N=65536 R=8 P=1 KeyLen=32
-init
Initialize encrypted directory.
-passwd
Change the password. Will ask for the old password, check if it is correct, and ask for a new one.
This can be used together with -masterkey
if
you forgot the password but know the master key. Note that without the
old password, gocryptfs cannot tell if the master key is correct and will
overwrite the old one without mercy. It will, however, create a backup copy
of the old config file as gocryptfs.conf.bak
. Delete it after
you have verified that you can access your files with the
new password.
-speed
Run crypto speed test. Benchmark Go's built-in GCM against OpenSSL (if available). The library that will be selected on "-openssl=auto" (the default) is marked as such.
-version
Print version and exit. The output contains three fields separated by ";". Example: "gocryptfs v1.1.1-5-g75b776c; go-fuse 6b801d3; 2016-11-01 go1.7.3". Field 1 is the gocryptfs version, field 2 is the version of the go-fuse library, field 3 is the compile date and the Go version that was used.
INIT OPTIONS
Available options for -init
are listed below. Usually, you don't need any.
Defaults are fine.
-aessiv
Use the AES-SIV encryption mode. This is slower than AES-GCM but is secure with deterministic nonces as used in "-reverse" mode.
Run gocryptfs -speed
to find out if and how much slower.
-deterministic-names
Disable file name randomisation and creation of gocryptfs.diriv
files.
This can prevent sync conflicts conflicts when synchronising files, but
leaks information about identical file names across directories
("Identical names leak" in https://nuetzlich.net/gocryptfs/comparison/#file-names ).
The resulting gocryptfs.conf
has "DirIV" missing from "FeatureFlags".
-devrandom
Obsolete and ignored on gocryptfs v2.2 and later.
See f3c777d5ea
and https://github.com/rfjakob/gocryptfs/issues/596 for background info.
-hkdf
Use HKDF to derive separate keys for content and name encryption from the master key. Default true.
-longnamemax
integer value, allowed range 62...255
Hash file names that (in encrypted form) exceed this length. The default is 255, which aligns with the usual name length limit on Linux and provides best performance.
However, online storage may impose lower limits on file name and/or path length. In this case, setting -longnamemax to a lower value can be helpful.
The lower the value, the more extra .name
files
must be created, which slows down directory listings.
Values below 62 are not allowed as then the hashed name would be longer than the original name.
Example:
-longnamemax 100
-plaintextnames
Do not encrypt file names and symlink targets.
-raw64
Use unpadded base64 encoding for file names. This gets rid of the trailing "\=\=". A filesystem created with this option can only be mounted using gocryptfs v1.2 and higher. Default true.
-reverse
Reverse mode shows a read-only encrypted view of a plaintext directory. Implies "-aessiv".
-scryptn int
scrypt cost parameter expressed as scryptn=log2(N). Possible values are 10 to 28, representing N=2^10 to N=2^28.
Setting this to a lower value speeds up mounting and reduces its memory needs, but makes the password susceptible to brute-force attacks. The default is 16.
-xchacha
Use XChaCha20-Poly1305 file content encryption. This should be much faster than AES-GCM on CPUs that lack AES acceleration.
Run gocryptfs -speed
to find out if and how much faster.
MOUNT OPTIONS
Available options for mounting are listed below. Usually, you don't need any. Defaults are fine.
-allow_other
By default, the Linux kernel prevents any other user (even root) to access a mounted FUSE filesystem. Settings this option allows access for other users, subject to file permission checking. Only works if user_allow_other is set in /etc/fuse.conf. This option is equivalent to "allow_other" plus "default_permissions" described in fuse(8).
-badname string
When gocryptfs encounters a "bad" file name (cannot be decrypted or decrypts to garbage), a warning is logged and the file is hidden from the plaintext view.
With the -badname
option, you can select "bad" file names that should
still be shown in the plaintext view instead of hiding them. Bad files
will get GOCRYPTFS_BAD_NAME
appended to their name.
Glob pattern. Can be passed multiple times for multiple patterns.
Examples:
Dropbox sync conflicts:
-badname '*conflicted copy*'
Syncthing sync conflicts:
-badname '*.sync-conflict*'
Show all invalid filenames:
-badname '*'
-ctlsock string
Create a control socket at the specified location. The socket can be
used to decrypt and encrypt paths inside the filesystem. When using
this option, make sure that the directory you place the socket in is
not world-accessible. For example, /run/user/UID/my.socket
would
be suitable.
-dev, -nodev
Enable (-dev
) or disable (-nodev
) device files in a gocryptfs mount
(default: -nodev
). If both are specified, -nodev
takes precedence.
You need root permissions to use -dev
.
-e PATH, -exclude PATH
Only for reverse mode: exclude relative plaintext path from the encrypted view, matching only from root of mounted filesystem. Can be passed multiple times.
Example that excludes the directories "Music" and "Movies" from the root directory:
gocryptfs -reverse -exclude Music -exclude Movies /home/user /mnt/user.encrypted
See also -exclude-wildcard
, -exclude-from
and the EXCLUDING FILES section.
-ew GITIGNORE-PATTERN, -exclude-wildcard GITIGNORE-PATTERN
Only for reverse mode: exclude paths from the encrypted view in gitignore(5) syntax, wildcards supported. Pass multiple times for multiple patterns.
Example to exclude all .mp3
files in any directory:
gocryptfs -reverse -exclude-wildcard '*.mp3' /home/user /mnt/user.encrypted
Example to to exclude everything but the directory 'important' in the root dir:
gocryptfs -reverse -exclude-wildcard '*' -exclude-wildcard '!/important' /home/user /mnt/user.encrypted
See also -exclude-from
and the EXCLUDING FILES section.
-exclude-from FILE
Only for reverse mode: reads gitignore patterns from a file. Can be passed multiple times. Example:
gocryptfs -reverse -exclude-from ~/crypt-exclusions /home/user /mnt/user.encrypted
See also -exclude
, -exclude-wildcard
and the EXCLUDING FILES section.
-exec, -noexec
Enable (-exec
) or disable (-noexec
) executables in a gocryptfs mount
(default: -exec
). If both are specified, -noexec
takes precedence.
-fg, -f
Stay in the foreground instead of forking away. For compatibility, "-f" is also accepted, but "-fg" is preferred.
Unless -notifypid
is also passed, the logs go to stdout and stderr
instead of syslog.
-force_owner string
If given a string of the form "uid:gid" (where both "uid" and "gid" are substituted with positive integers), presents all files as owned by the given uid and gid, regardless of their actual ownership. Implies "allow_other".
This is rarely desired behavior: One should usually run gocryptfs as the account which owns the backing-store files, which should usually be one and the same with the account intended to access the decrypted content. An example of a case where this may be useful is a situation where content is stored on a filesystem that doesn't properly support UNIX ownership and permissions.
-forcedecode
Obsolete and ignored on gocryptfs v2.2 and later.
See d023cd6c95
for what it was and why it was dropped.
-fsname string
Override the filesystem name (first column in df -T). Can also be passed as "-o fsname=" and is equivalent to libfuse's option of the same name. By default, CIPHERDIR is used.
-fusedebug
Enable fuse library debug output.
-i duration, -idle duration
Only for forward mode: automatically unmount the filesystem if it has been idle for the specified duration. Durations can be specified like "500s" or "2h45m". 0 (the default) means stay mounted indefinitely.
When a process has open files or its working directory in the mount, this will keep it not idle indefinitely.
-kernel_cache
Enable the kernel_cache option of the FUSE filesystem, see fuse(8) for details.
-ko
Pass additional mount options to the kernel (comma-separated list).
FUSE filesystems are mounted with "nodev,nosuid" by default. If gocryptfs
runs as root, you can enable device files by passing the opposite mount option,
"dev", and if you want to enable suid-binaries, pass "suid".
"ro" (equivalent to passing the "-ro" option) and "noexec" may also be
interesting. For a complete list see the section
FILESYSTEM-INDEPENDENT MOUNT OPTIONS
in mount(8). On MacOS, "local",
"noapplexattr", "noappledouble" may be interesting.
Note that unlike "-o", "-ko" is a regular option and must be passed BEFORE the directories. Example:
gocryptfs -ko noexec /tmp/foo /tmp/bar
-longnames
Store names that are longer than 175 bytes in extra files (default true).
This flag is only useful when recovering very old gocryptfs filesystems (gocryptfs v0.8 and earlier) using "-masterkey". It is ignored (stays at the default) otherwise.
-nodev
See -dev, -nodev
.
-noexec
See -exec, -noexec
.
-nofail
Having the nofail
option in /etc/fstab
instructs systemd
to continue
booting normally even if the mount fails (see man systemd.fstab
).
The option is ignored by gocryptfs
itself and has no effect outside /etc/fstab
.
-nonempty
Allow mounting over non-empty directories. FUSE by default disallows this to prevent accidental shadowing of files.
-noprealloc
Disable preallocation before writing. By default, gocryptfs preallocates the space the next write will take using fallocate(2) in mode FALLOC_FL_KEEP_SIZE. The preallocation makes sure it cannot run out of space in the middle of the write, which would cause the last 4kB block to be corrupt and unreadable.
On ext4, preallocation is fast and does not cause a noticeable performance hit. Unfortunately, on Btrfs, preallocation is very slow, especially on rotational HDDs. The "-noprealloc" option gives users the choice to trade robustness against out-of-space errors for a massive speedup.
For benchmarks and more details of the issue see https://github.com/rfjakob/gocryptfs/issues/63 .
-nosuid
See -suid, -nosuid
.
-nosyslog
Diagnostic messages are normally redirected to syslog once gocryptfs daemonizes. This option disables the redirection and messages will continue be printed to stdout and stderr.
-notifypid int
Send USR1 to the specified process after successful mount. This is used internally for daemonization.
-one-file-system
Don't cross filesystem boundaries (like rsync's --one-file-system
).
Mountpoints will appear as empty directories.
Only applicable to reverse mode.
Limitation: Mounted single files (yes this is possible) are NOT hidden.
-rw, -ro
Mount the filesystem read-write (-rw
, default) or read-only (-ro
).
If both are specified, -ro
takes precedence.
-reverse
See the -reverse
section in INIT FLAGS. You need to specify the
-reverse
option both at -init
and at mount.
-serialize_reads
The kernel usually submits multiple concurrent reads to service userspace requests and kernel readahead. gocryptfs serves them concurrently and in arbitrary order. On backing storage that performs poorly for concurrent or out-of-order reads (like Amazon Cloud Drive), this behavior can cause very slow read speeds.
The -serialize_reads
option does two things: (1) reads will be submitted one-by-one (no
concurrency) and (2) gocryptfs tries to order the reads by file
offset order.
The ordering requires gocryptfs to wait a certain time before submitting a read. The serialization introduces extra locking. These factors will limit throughput to below 70MB/s.
For more details visit https://github.com/rfjakob/gocryptfs/issues/92 .
-sharedstorage
Enable work-arounds so gocryptfs works better when the backing storage directory is concurrently accessed by multiple gocryptfs instances.
At the moment, it does two things:
- Disable stat() caching so changes to the backing storage show up immediately.
- Disable hard link tracking, as the inode numbers on the backing storage are not stable when files are deleted and re-created behind our back. This would otherwise produce strange "file does not exist" and other errors.
When "-sharedstorage" is active, performance is reduced and hard links cannot be created.
Even with this flag set, you may hit occasional problems. Running gocryptfs on shared storage does not receive as much testing as the usual (exclusive) use-case. Please test your workload in advance and report any problems you may hit.
More info: https://github.com/rfjakob/gocryptfs/issues/156
-suid, -nosuid
Enable (-suid
) or disable (-nosuid
) suid and sgid executables in a gocryptfs
mount (default: -nosuid
). If both are specified, -nosuid
takes precedence.
You need root permissions to use -suid
.
-zerokey
Use all-zero dummy master key. This options is only intended for automated testing as it does not provide any security.
COMMON OPTIONS
Options that apply to more than one action are listed below. Each options lists where it is applicable. Again, usually you don't need any.
-config string
Use specified config file instead of CIPHERDIR/gocryptfs.conf
.
Applies to: all actions that use a config file: mount, -fsck
, -passwd
, -info
, -init
.
-cpuprofile string
Write cpu profile to specified file.
Applies to: all actions.
-d, -debug
Enable debug output.
Applies to: all actions.
-extpass CMD [-extpass ARG1 ...]
Use an external program (like ssh-askpass) for the password prompt.
The program should return the password on stdout, a trailing newline is
stripped by gocryptfs. If you just want to read from a password file, see -passfile
.
When -extpass
is specified once, the string argument will be split on spaces.
For example, -extpass "md5sum my password.txt"
will be executed as
"md5sum" "my" "password.txt"
, which is NOT what you want.
Specify -extpass
twice or more to use the string arguments as-is.
For example, you DO want to call md5sum
like this:
-extpass "md5sum" -extpass "my password.txt"
.
If you want to prevent splitting on spaces but don't want to pass arguments
to your program, use "--"
, which is accepted by most programs:
-extpass "my program" -extpass "--"
Applies to: all actions that ask for a password.
BUG: In -extpass -X
, the -X
will be interpreted as --X
. Please use
-extpass=-X
to prevent that. See Dash duplication in the BUGS section
for details.
-fido2 DEVICE_PATH
Use a FIDO2 token to initialize and unlock the filesystem. Use "fido2-token -L" to obtain the FIDO2 token device path.
Applies to: all actions that ask for a password.
-masterkey string
Use a explicit master key specified on the command line or, if the special value "stdin" is used, read the masterkey from stdin, instead of reading the config file and asking for the decryption password.
Note that the command line, and with it the master key, is visible to anybody on the machine who can execute "ps -auxwww". Use "-masterkey=stdin" to avoid that risk.
The masterkey option is meant as a recovery option for emergencies, such as if you have forgotten the password or lost the config file.
Even if a config file exists, it will not be used. All non-standard
settings have to be passed on the command line: -aessiv
when you
mount a filesystem that was created using reverse mode, or
-plaintextnames
for a filesystem that was created with that option.
Examples:
-masterkey=6f717d8b-6b5f8e8a-fd0aa206-778ec093-62c5669b-abd229cd-241e00cd-b4d6713d
-masterkey=stdin
Applies to: all actions that ask for a password.
-memprofile string
Write memory profile to the specified file. This is useful when debugging memory usage of gocryptfs.
Applies to: all actions.
-o COMMA-SEPARATED-OPTIONS
For compatibility with mount(1), options are also accepted as "-o COMMA-SEPARATED-OPTIONS" at the end of the command line. For example, "-o q,zerokey" is equivalent to passing "-q -zerokey".
Note that you can only use options that are understood by gocryptfs with "-o". If you want to pass special flags to the kernel, you should use "-ko" (kernel option). This is different in libfuse-based filesystems, that automatically pass any "-o" options they do not understand along to the kernel.
Example:
gocryptfs /tmp/foo /tmp/bar -o q,zerokey
Applies to: all actions.
-openssl bool/"auto"
Use OpenSSL instead of built-in Go crypto (default "auto"). Using built-in crypto is 4x slower unless your CPU has AES instructions and you are using Go 1.6+. In mode "auto", gocrypts chooses the faster option.
Applies to: all actions.
-passfile FILE [-passfile FILE2 ...]
Read password from the specified plain text file. The file should contain exactly one line (do not use binary files!). A warning will be printed if there is more than one line, and only the first line will be used. A single trailing newline is allowed and does not cause a warning.
Pass this option multiple times to read the first line from multiple files. They are concatenated for the effective password.
Example:
echo hello > hello.txt
echo word > world.txt
gocryptfs -passfile hello.txt -passfile world.txt
The effective password will be "helloworld".
Applies to: all actions that ask for a password.
-q, -quiet
Quiet - silence informational messages.
Applies to: all actions.
-trace string
Write execution trace to file. View the trace using "go tool trace FILE".
Applies to: all actions.
-wpanic
When encountering a warning, panic and exit immediately. This is useful in regression testing.
Applies to: all actions.
--
Stop option parsing. Helpful when CIPHERDIR may start with a dash "-".
Applies to: all actions.
EXCLUDING FILES
In reverse mode, it is possible to exclude files from the encrypted view, using
the -exclude
, -exclude-wildcard
and -exclude-from
options.
-exclude
matches complete paths, so -exclude file.txt
only excludes a file
named file.txt
in the root of the mounted filesystem; files named file.txt
in subdirectories are still visible. Wildcards are NOT supported.
This option is kept for compatibility with the behavior up to version 1.6.x.
New users should use -exclude-wildcard
instead.
-exclude-wildcard
uses gitignore syntax and matches files anywhere, so -exclude-wildcard file.txt
excludes files named file.txt
in any directory. If you want to match complete
paths, you can prefix the filename with a /
: -exclude-wildcard /file.txt
excludes only file.txt
in the root of the mounted filesystem.
If there are many exclusions, you can use -exclude-from
to read gitignore
patterns from a file. As with -exclude-wildcard
, use a
leading /
to match complete paths.
The rules for exclusion are that of gitignore. In short:
- A blank line matches no files, so it can serve as a separator for readability.
- A line starting with
#
serves as a comment. Put a backslash (\
) in front of the first hash for patterns that begin with a hash. - Trailing spaces are ignored unless they are quoted with backslash (
\
). - An optional prefix
!
negates the pattern; any matching file excluded by a previous pattern will become included again. It is not possible to re-include a file if a parent directory of that file is excluded. Put a backslash (\
) in front of the first!
for patterns that begin with a literal!
, for example,\!important!.txt
. - If the pattern ends with a slash, it is removed for the purpose of the
following description, but it would only find a match with a directory.
In other words,
foo/
will match a directory foo and paths underneath it, but will not match a regular file or a symbolic link foo. - If the pattern does not contain a slash
/
, it is treated as a shell glob pattern and checked for a match against the pathname relative to the root of the mounted filesystem. - Otherwise, the pattern is treated as a shell glob suitable for
consumption by fnmatch(3) with the FNM_PATHNAME flag: wildcards in the
pattern will not match a
/
in the pathname. For example,Documentation/*.html
matchesDocumentation/git.html
but notDocumentation/ppc/ppc.html
ortools/perf/Documentation/perf.html
. - A leading slash matches the beginning of the pathname. For example,
/*.c
matchescat-file.c
but notmozilla-sha1/sha1.c
. - Two consecutive asterisks (
**
) in patterns matched against full pathname may have special meaning: i. A leading**
followed by a slash means match in all directories. For example,**/foo
matches file or directoryfoo
anywhere, the same as patternfoo
.**/foo/bar
matches file or directorybar
anywhere that is directly under directoryfoo
. ii. A trailing/**
matches everything inside. For example,abc/**
matches all files inside directoryabc
, with infinite depth. iii. A slash followed by two consecutive asterisks then a slash matches zero or more directories. For example,a/**/b
matchesa/b
,a/x/b
,a/x/y/b
and so on. iv. Other consecutive asterisks are considered invalid.
EXAMPLES
Init
Create an encrypted filesystem in directory "mydir.crypt", mount it on "mydir":
mkdir mydir.crypt mydir
gocryptfs -init mydir.crypt
gocryptfs mydir.crypt mydir
Mount
Mount an encrypted view of joe's home directory using reverse mode:
mkdir /home/joe.crypt
gocryptfs -init -reverse /home/joe
gocryptfs -reverse /home/joe /home/joe.crypt
fstab
Adding this line to /etc/fstab
will mount /tmp/cipher
to /tmp/plain
on boot, using the
password in /tmp/passfile
. Use sudo mount -av
to test the line without having
to reboot. Adjust the gocryptfs path acc. to the output of the command which gocryptfs
.
Do use the nofail
option to prevent an unbootable system if the gocryptfs mount fails (see
the -nofail
option for details).
/tmp/cipher /tmp/plain fuse./usr/local/bin/gocryptfs nofail,allow_other,passfile=/tmp/password 0 0
ENVIRONMENT VARIABLES
NO_COLOR
If NO_COLOR
is set (regardless of value), colored output is disabled (see https://no-color.org/).
EXIT CODES
0: success
6: CIPHERDIR is not an empty directory (on "-init")
10: MOUNTPOINT is not an empty directory
12: password incorrect
22: password is empty (on "-init")
23: could not read gocryptfs.conf
24: could not write gocryptfs.conf (on "-init" or "-password")
26: fsck found errors
other: please check the error message
See also: https://github.com/rfjakob/gocryptfs/blob/master/internal/exitcodes/exitcodes.go
BUGS
Dash duplication
gocryptfs v2.1 switched to the pflag
library for command-line parsing
to support flags and positional arguments in any order. To stay compatible
with single-dash long options like -extpass
, an ugly hack was added:
The command line is preprocessed, and all single-dash options are converted to
double-dash.
Unfortunately, this means that in
gocryptfs -extpass myapp -extpass -X
gocryptfs transforms the -X
to --X
, and it will call myapp --X
as the extpass program.
Please use
gocryptfs -extpass myapp -extpass=-X
to work around this bug.
SEE ALSO
mount(2) fuse(8) fallocate(2) encfs(1) gitignore(5)