Aston-HyperV-Code/Guests/RTR-01.ps1

74 lines
2.3 KiB
PowerShell
Raw Normal View History

2021-04-09 15:51:30 +02:00
# Alexandre SIMAO
# GPLv3
# Script to install and configure a Fuckdows Server 2016 as a router
# RTR-01 Only
# Change the poor machine name
2021-04-20 10:49:35 +02:00
Read-host "Script for RTR-01"
Read-host "WARNING: Plug-in in this order Arc-SRV, Arc-CLI and WAN"
echo "Shamefully made by Alexandre Simao. Pardon-me M. Stallman"
Rename-computer RTR-01
Rename-NetAdapter -Name "Ethernet" -NewName "Arc-SRV"
Rename-NetAdapter -Name "Ethernet 2" -NewName "Arc-CLI"
Rename-NetAdapter -Name "Ethernet 3" -NewName "WAN"
2021-04-09 15:51:30 +02:00
# Install Routing and necessary linked roles
Install-WindowsFeature RemoteAccess, RSAT-RemoteAccess-PowerShell, Routing -IncludeManagementTools
#Install-remoteAccess -VpnType Vpn
2021-04-19 17:06:39 +02:00
Set-NetConnectionProfile -networkcategory private
2021-04-19 16:04:47 +02:00
# Change IP and DNS
#
netsh interface ip set address "WAN" static 192.168.255.8 255.255.255.0 192.168.255.254
netsh interface ip set address "Arc-CLI" static 192.168.12.254 255.255.255.0
netsh interface ip set address "Arc-SRV" static 192.168.8.254 255.255.255.0
netsh interface ip set dns name="WAN" static 9.9.9.9
2021-04-09 15:51:30 +02:00
# Display interfaces and active forwarding for all of thm via Regedit
netsh inter show inter
Set-ItemProperty -path 'HKLM:\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet`
\Services\Tcpip\Parameters' -Name 'IPEnableRouter' -Value '0x00000001'
Set-NetConnectionProfile -NetworkCategory Private
# Activate NAT and DHCP Relay
netsh routing ip relay install
netsh routing ip add interface name="WAN" state=enable
netsh routing ip relay add interface "WAN"
netsh rout ip rel set int ARC-CLI min=0
netsh routing ip relay add interface "Arc-CLI"
netsh rout ip rel set int ARC-SRV min=0
netsh routing ip relay add interface "Arc-SRV"
netsh rout ip rel set int WAN min=0
netsh routing ip relay add dhcpserver 192.168.8.1
set-service RemoteAccess -StartupType Automatic
Start-Service RemoteAccess
netsh -f ./Arc-CLI.conf
netsh -f ./Arc-SRV.conf
netsh -f ./WAN.conf
# Change ZoneAlarm rule to accept incoming ICMP ipv4 probes
$Params = @{
"Name" = 'vm-monitoring-icmpv4'
"Action" = 'Allow'
}
Set-NetFirewallRule @Params
# Add routes
route add -p 192.168.8.0/24 192.168.8.254
route add -p 192.168.12.0.24 192.168.12.254
route add -p 192.168.255.0/24 192.168.255.8
route add -p 192.168.128.8/24 192.168.255.128
2021-04-19 16:04:47 +02:00
route add -p 0.0.0.0/0 192.168.255.254