Instead of manually adjusting the user and mode after creating the
device file, adjust effective permissions and let the kernel deal
with it.
Related to https://github.com/rfjakob/gocryptfs/issues/338.
The current code has a risk of race-conditions, since we pass a path
containing "/" to Fchownat. We could fix this by opening a file descriptor,
however, this does not seem worth the effort. We also don't chown *.name files.
Make sure that the directory belongs to the correct owner before users
can access it. For directories with SUID/SGID mode, there is a risk of
race-conditions when files are created before the correct owner is set.
They will then inherit the wrong user and/or group.
See https://github.com/rfjakob/gocryptfs/issues/327 for more details.
Reported by @slackner at https://github.com/rfjakob/gocryptfs/issues/327 :
Possible race-conditions between file creation and Fchownat
* Assume a system contains a gocryptfs mount as root user
with -allow_other
* As a regular user create a new file with mode containing
the SUID flag and write access for other users
* Before gocryptfs executes the Fchownat call, try to open
the file again, write some exploit code to it, and try to run it.
For a short time, the file is owned by root and has the SUID flag, so
this is pretty dangerous.
The files are apparently processed in alphabetic order, so cli_args.go is
processed before main.go. In order to run before the go-fuse imports, put
the 'ensure fds' code in a separate package. Debug messages are omitted
to avoid additional imports (that might contain other code messing up our
file descriptors).
Setting/removing extended attributes on directories was partially fixed with
commit eff35e60b6. However, on most file systems
it is also possible to do these operations without read access (see tests).
Since we cannot open a write-access fd to a directory, we have to use the
/proc/self/fd trick (already used for ListXAttr) for the other operations aswell.
For simplicity, let's separate the Linux and Darwin code again (basically revert
commit f320b76fd1), and always use the
/proc/self/fd trick on Linux. On Darwin we use the best-effort approach with
openBackingFile() as a fallback.
More discussion about the available options is available in
https://github.com/rfjakob/gocryptfs/issues/308.
Otherwise this can happen, as triggered by xfstests generic/011:
go-fuse: can't convert error type: openat failed: too many open files
The app then gets a misleading "Function not implemented" error.
We alread have this warning in Open(), but xfstests generic/488
causes "too many open files" via Create. Add the same message so
the user sees what is going on.
Go version go1.10.7 linux/amd64 complains with:
internal/fusefrontend_reverse/rfs.go:333: declaration of "entries" shadows
declaration at internal/fusefrontend_reverse/rfs.go:327
Fixes https://github.com/rfjakob/gocryptfs/issues/286 :
While the actual file is properly excluded, the * .name file is still leaked in the directory listing:
```
drwxr-xr-x 2 sebastian sebastian 4,0K Dez 17 14:58 .
drwxr-xr-x 7 sebastian sebastian 4,0K Dez 17 14:45 ..
-r-------- 1 sebastian sebastian 408 Dez 17 14:56 gocryptfs.conf
-r--r--r-- 1 sebastian sebastian 16 Dez 17 14:58 gocryptfs.diriv
-r--r--r-- 1 sebastian sebastian 320 Dez 17 14:58 gocryptfs.longname.3vZ_r3eDPb1_fL3j5VA4rd_bcKWLKT9eaxOVIGK5HFA.name
```
Excluded files showed up in directory listing like this:
drwxr-xr-x 2 sebastian sebastian 4,0K Dez 17 14:48 .
drwxr-xr-x 7 sebastian sebastian 4,0K Dez 17 14:45 ..
-????????? ? ? ? ? ? abcd
-r-------- 1 sebastian sebastian 366 Dez 17 14:45 gocryptfs.conf
Fixes https://github.com/rfjakob/gocryptfs/issues/285
When the old size is zero, there are no existing blocks to merge the
new data with. Directly use Ftruncate if the size is block-aligned.
Fixes https://github.com/rfjakob/gocryptfs/issues/305
Bug looked like this:
$ ls -l .
total 0
drwxrwxr-x. 2 jakob jakob 60 Jan 3 15:42 foo
-rw-rw-r--. 1 jakob jakob 0 Jan 3 15:46 x
$ ls -l .
ls: cannot access '.': No such file or directory
(only happened when "" was in the dirCache)
This function is in all fastpaths, will get a cache, and needs
its own file.
renamed: internal/fusefrontend/names.go -> internal/fusefrontend/openbackingdir.go
renamed: internal/fusefrontend/names_test.go -> internal/fusefrontend/openbackingdir_test.go
An Open() a fifo blocks until it is opened for writing.
This meant that xattr operations on FIFOs would block.
Pass O_NONBLOCK to fix that, and add a test.
Failure was:
+ GOOS=darwin
+ GOARCH=amd64
+ go build -tags without_openssl
# github.com/rfjakob/gocryptfs/internal/fusefrontend
internal/fusefrontend/fs_dir.go:159:60: cannot use origMode | 448 (type uint16) as type uint32 in argument to syscallcompat.Fchmodat
internal/fusefrontend/fs_dir.go:170:33: cannot use origMode (type uint16) as type uint32 in argument to syscallcompat.Fchmodat
Use openBackingDir() and Fstatat().
High performance impact, though part of it should be
mitigated by adding DirIV caching to the new code paths.
$ ./benchmark.bash
Testing gocryptfs at /tmp/benchmark.bash.Eou: gocryptfs v1.6-37-ge3914b3-dirty; go-fuse v20170619-66-g6df8ddc; 2018-10-14 go1.11
WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.2289 s, 213 MB/s
READ: 262144000 bytes (262 MB, 250 MiB) copied, 1.02616 s, 255 MB/s
UNTAR: 24.490
MD5: 13.120
LS: 3.368
RM: 9.232
The directory was already created, so return success even if Fchownat fails.
The same error handling is already used if fs.args.PlaintextNames is false.
Old XFS filesystems always return DT_UNKNOWN. Downgrade the message
to "info" level if we are on XFS.
Using the "warning" level means that users on old XFS filesystems
cannot run the test suite as it intentionally aborts on any
warnings.
Fixes https://github.com/rfjakob/gocryptfs/issues/267
When gocryptfs was started on a terminal and later
daemonized, the color codes stayed active in the syslog
output.
The codes are not visible in "journalctl -f", which is why
I have not noticed it yet, but they do show up in normal
syslog as the usual "#033[33m" crap.
Even though filesystem notifications aren't implemented for FUSE, I decided to
try my hand at implementing the autounmount feature (#128). I based it on the
EncFS autounmount code, which records filesystem accesses and checks every X
seconds whether it's idled long enough to unmount.
I've tested the feature locally, but I haven't added any tests for this flag.
I also haven't worked with Go before. So please let me know if there's
anything that should be done differently.
One particular concern: I worked from the assumption that the open files table
is unique per-filesystem. If that's not true, I'll need to add an open file
count and associated lock to the Filesystem type instead.
https://github.com/rfjakob/gocryptfs/pull/265
Error was:
# github.com/rfjakob/gocryptfs/internal/fusefrontend
internal/fusefrontend/fs.go:179: cannot use perms | 256 (type uint16) as type uint32 in argument to syscall.Fchmod
internal/fusefrontend/fs.go:185: cannot use perms (type uint16) as type uint32 in argument to syscall.Fchmod
Rename openBackingPath to openBackingDir and use OpenDirNofollow
to be safe against symlink races. Note that openBackingDir is
not used in several important code paths like Create().
But it is used in Unlink, and the performance impact in the RM benchmark
to be acceptable:
Before
$ ./benchmark.bash
Testing gocryptfs at /tmp/benchmark.bash.bYO: gocryptfs v1.6-12-g930c37e-dirty; go-fuse v20170619-49-gb11e293; 2018-09-08 go1.10.3
WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.07979 s, 243 MB/s
READ: 262144000 bytes (262 MB, 250 MiB) copied, 0.882413 s, 297 MB/s
UNTAR: 16.703
MD5: 7.606
LS: 1.349
RM: 3.237
After
$ ./benchmark.bash
Testing gocryptfs at /tmp/benchmark.bash.jK3: gocryptfs v1.6-13-g84d6faf-dirty; go-fuse v20170619-49-gb11e293; 2018-09-08 go1.10.3
WRITE: 262144000 bytes (262 MB, 250 MiB) copied, 1.06261 s, 247 MB/s
READ: 262144000 bytes (262 MB, 250 MiB) copied, 0.947228 s, 277 MB/s
UNTAR: 17.197
MD5: 7.540
LS: 1.364
RM: 3.410
